Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Similar Messages

I only get 30 seconds of show after downloading from iTunes. how do i get the full episodes?

i only get 30 seconds of show after downloading from iTunes. how do i get the full episodes?

Are you sure to have the full length file in the library? If you start playing it, will it show the full runtime on the controls?

My iPad shows the apple logo for 5 seconds while charging then shuts off for 10 seconds then shows the apple logo for 5 seconds and so on. I can get it to the connect to iTunes screen but as soon as I unplug it from the wall it shuts off. Can anyone help?

The apple logo appears for 5 seconds then disappears for 10 then appears for five and so on. I can get it to the connect to iTunes screen but as soon as I unplug it from the wall it shuts off completely. A laptop with iTunes isn't enough to power it up. Can anyone help me fix this?

Awesome. This is the iPhone 4 discussions! Have a nice day

BB Curve tried 2 new batteries won't charge - battery icon flashes yellow for few seconds then shows a black plug

BB Curve 9360. Please help.
My 6 month old battery stopped taking a charge. Had left to charge overnight from the mains and phone was dead in morning. Wouldn't turn on or take a charge.
Had a spare battery from before and tried this. Charged to 25% and then showed battery icon with black plug and wouldn't take any more. If unplug and re-plug, shows yellow flash as if charging for a few seconds and then shows black plug. 25% charge runs down very quickly.
Bought a new battery. Exactly same experience. Sometimes gets between 5 - 25% charge but mostly is completely dead and not enough power to get beyond red flashing indicator.
Tried on and off. Tried taking out battery (many times!). Tried taking battery out while charging, waiting 30 seconds and then replacing battery (many times). Tried 3 other chargers, both from mains and from USB.
Have left it plugged in for hours even when showing black plug or just empty red battery - nothing. Just dies completely and hard to get enough power to get started again.
Left it unplugged and without battery for 2 days. Plugged into mains, got yellow flash and then black plug. Every time got black plug would unplug and re-plug to get yellow flashing back. Got it to 80% that time. But now gone back to only reaches 5% or won't take a charge and just red batterys sometimes with black plug or just empty, red flashing indicator.
Plugged into BB desktop manager to back up and checked for software updates. No updates available.
Only thing I can think is mini USB slot on BB is broken and need a new phone. Any ideas of anything else to try before bite the bullet??? Thank you!!

SaitoChikara wrote:
The number on the front of the battery is C-M2. It has a yellow label.
Wrong battery!
You need the CS-2, blue
http://www.amazon.com/BlackBerry-CS-2-Original-Li-Ion-Battery/dp/B0030T0UGW
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Has anyone tried to pair the iphone with a 2006 Lexus GX470?

before opening the package I would like to know if anyone has been able to use the bluetooth capabilities of the iphone with a 2006 Lexus. Was you able to pair the phone to the car's bluetooth technology?

OK I do not have a Lexus, but I have a 2004 Prius with Nav and Bluetooth and as I understand it the Bluetooth is the same. It took me like 45 seconds to do it. I did not touch a manual. Go to the phone and then the set up. In my car it gives you the default password. Go to the settings-> Network -> Bluetooth on the iPhone type in the password and you are in. Uploading you phone book is another issue but can be done from you Mac or PC with Bluetooth or with a older Bluetooth phone.

I cannot get my new Ipod Nano to pair with my bluetooth Headphones. It just searches endlessly. These same headphones work with my blackberry playbook. Does Apple only allow certain bluetooth devices to pair? i.e. only the ones sold on their site?

I cannot get my new Ipod Nano to pair with my bluetooth Headphones. It searches without finding it. This headset works fine with my blackberry playbook. Any suggestions?

thanks for reply... I saw on the Nano package that it is only compatible with bluetooth 4v. Is that the same as A2DP.
That's probably the problem... it wasn't a high-end headset.

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions.

Has anyone tried to have their glass screen repaired on the ipod touch

I've gotten a lot of results searching for repair on the glass screen, even sites that have kits for doing it yourself, has anyone tried to have their screen repaired this way? I know about the trade in offers, but I've seen repairs as low as $25.

Some users posted that they did it themselves successfully.
Some tried themselves and ended up not working at all afterwards.
Some had a local third-party do it and it did not work satisfactorily afer it was returned.

Has anyone tried creating a plugin that you can type in a specific word, and if it comes up in the very top of the page (i think its refered to as the header) it closes the page or tab automatically?

Has anyone tried creating a plugin that you can type in a specific word, and if it comes up in the very top of the page (i think its refered to as the header) it closes the page or tab automatically? there is a program called POW! by AnalogX that does this, but its only good for IE. And Im a Firefox man. Can anyone look into this or maybe create a plugin that does what POW! does for IE? I will donate to the creater of a plugin that does that. Im so sick of pop ups that most pop up blockers miss.

The Firefox pop-up blocker is very effective. If you are getting a lot of pop-ups in Firefox, you may have picked up some Malware that is causing those pop-ups.
Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

TS1424 has anyone not been able to get the installer to properly load and get a message like: This installer is intended for 32 bit versions of windows. Please download and install 64 bit iTuines installer instead? and even if you uninstall and reinstall

Has anyone not been able to get the iTunes installer to load properly and get a message like this: This iTunes installer is intended for 32 bit versions of windows. Please download and install 64 bit iTunes installer instead. I have tried repeatedly to get this to load, I have uninstalled iTunes completely and reinstalled and still get the same message. I have windows XP and a brand new ipod touch which I am trying to load.

Yes, it's come up a number of times. If you look to the right under "more like this", you'll find threads that may offer useful suggestions.
Regards.

Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud? The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to. Help please!

Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud? On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both. What experiences has the community had? I'm also having syncing issues with photos most recently as well as contact updates. (I have an iPhone 4S with the iOS7.1) Thanks much!

It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT5262
If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

Has anyone tried the new MS Oracle DataProvider ?

Hi all.
Has anyone tried the Microsoft issued Oracle .Net data provider? I am not fond of switching horses in midstream (have been struggling with ODP for a few weeks). I do not like the ODP for these reasons...
1) Documentation is really non-existant/useless especially where hueristics and 'gotchas' are concerned
2) it is a HUGE install (why I have no idea)
3) some things simply do not work (like my recent rants on trying to return varchar2's from stored procs and functions).
Is the MS any better ?
Thanks

Hi,
1) There is a pdf doc and integrated help which comes with the ODP.NET. There are a few gotchas which could cause some hair-pulling moments. Sometimes it helps to read the same doc several times to really know what to do.
But instead of wasting time reading the doc, the samples cover most of the typical cases. (i think it includes your varchar2 output bind case).
2) The huge install is due to Oracle Client 9. The provider needs several dlls beyond Oracle.DataAccess.dll and OraOps9.dll. There are some other oracle standard dependencies also. MS provider for oracle will have the same issue (I think they need oracle client install also).
There a few post where the `Instant client install` is going to solve that.
But the thin client (like JDBC thin driver for oracle) is still (IMHO) the best solution for the huge install problem.
3) See my reply in the other post. (try the sample also)
Finally, which some other posters have mentioned before: Good luck looking for help for MS's provider when you are stuck.
Arnold

If i have an iPhone and an iPad on the same apple id, what do i do to NOT have my iPad get the imessages for my phone?

If i have an iPhone and an iPad on the same apple id, what do i do to NOT have my iPad get the imessages for my phone?

On the iPad:
Settings > Messages > Send & Receive > Uncheck your phone number from both sections
To turn it off completely:
Settings > Messages > turn off iMessage

Has anyone tried to use the Online Edition of Quickbooks and Tiger?

I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Similar Messages

Maybe you are looking for