Has anyone tried using a JavaScript External Library with 64bit InDesign?

I have an event listener that calls a JavaScript file. The JS script uses a c++ external library. All works fine with 32 bit InDesign including the new cloud version, but I get an "I/O error" when trying to load the library from a 64bit InDesign generated event. I have even tried using the sample project BasicExternalObject and get the same error.
Any thots would be greatly appreciated.
Ron R

Hi Zhiqiang_Li <http://forums.adobe.com/people/Zhiqiang_Li> ,
Yes, I got this working some time ago. I am not a mac user but perhaps the general principle is the same:
In Windows 64, if your application is compiled 64bit then you can only access InDesign 64bit and its object library. However if your app is 32 bit then you can only access InDesign 32bit and its object library.
Sorry I don’t know more about the mac. All of our users (200+) use InDesign for windows so of course our app is also windows based. Does the mac support both a 32 and 64 bit version of InDesign? If not my solution will not be much help.
Ron
United Bible Societies Association, a company limited by guarantee.
Registered in England and Wales No 2264875. Registered Charity No 800058
Registered Office: Stonehill Green, Westlea, Swindon, Wiltshire, SN5 7PJ,
England.

Similar Messages

Has anyone tried using "ffmpegx" to compress video files to Xvid files?

Has anyone tried using the program ffmpegx to compress your video files into Xvid files? Still trying to find a magic solution to save some space on my hard drive

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

AVCHD - Has anyone tried using Parallels

Hello,
I have the HDR-SR1 and am just as frustrated as everyone else on this board.
Has anyone tried using Parallels to capture the AVCHD footage in the Windows environment then bringing it into FPC on your Mac?
I tried but couldn't get it to locate the drive. My last solution is the Blackmagic vid card, just wanted to see if this works before I buy one.
cheers

http://discussions.apple.com/message.jspa?messageID=4739843#4739843
x

Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

Although I gave up investment tracking for personal reasons (I had used Quicken Deluxe 2002 for many years for that reason), my understanding is that the new Quicken 2007 for Lion/Mt. Lion is completely the same feature wise as Quicken 2007 for PPC. It will run on Snow Leopard, too.
For $15, why not download it and just try it and LET US KNOW!

Has anyone tried the new retina display MBP with a projector?

I bought a new MacbookPro with retina display online the other day (hasn't arrived yet). I use this primarily for business doing presentations etc. Has anyone tried connecting a projector using the Thunderbolt VGA adapter? Just curious if it'll work.
Thanks

Similar problem. I used my macbook Pro Retina with my Thunderbolt to VGA adapter all through the fall, and never had any trouble with it. Just before Christmas I got a Thunderbolt display.
Since that time, whenever I connect the projector, I get a black screen. I can see and move the mouse, but nothing else. Other computers still work with the projector.
I'm not certain if the Thunderbolt Display has anything to do with this or not, but it's just the timing that it happened.
Grateful for anyone that can offer help!

Has anyone successfully used the ZTE Open C with an AT&T microcell?

I have a ZTE Open C and have had no issues with initial setup w/AT&T. However, like most newer phones the voice signal reception is very weak.
I've had an AT&T Microcell before, but I don't have one now. For those that are unaware, the microcell allows 3G phones to connect via a 3G signal, but the call is routed through a home broadband internet connection.
Has anyone successfully used a ZTE Open C w/Firefox OS AND used an AT&T microcell? If yes, did you need to do anything special on the phone or with Firefox OS.

I don't use a ZTE Open C, however, I do have a ZTE Open (Original) on AT&T and so I'll see if I can help ;D
I know someone who has a Microcell, and I have used it myself a few times. However, the microcell only works if you have entered in your phone number into settings of the Microcell.
Check the Microcell settings.
Check the data connection settings on your FxOS device
Make sure your Microcell is properly connected to WiFi
and check the AT&T support page for more info
For a while, it actually hasn't actually worked for me. I apologize if this doesn't solve your problem :D

Has anyone tried using the app Telnames for their mobile sites/storage?

Have been looking at EverWeb and lurking in the forums following the discussions regarding it. Downloaded the demo and it seems like more then I want to do. (Still using iWeb for my main site)
While looking for alternatives I saw Telnames on App Store. I would like to know if anyone has tried using/buying it? I will be working on a 6+ and building a Bed and Breakfast mobile site.
Thanks in advance
D

Thanks for the info on symlinks. I pretty much already convinced the powers above me this was a bad idea because of the horrible performance and problems getting OS X to even recognize it as a home directory, but the symlink info is the nail in the coffin. We have had great success using windows file servers for our network home directories (we are a complete windows shop besides my macs) and I really didn't want to change anyways.

Has anyone tried using a Mac to stream BBC iPlayer content to a 360 or PS3?

Hi there
I am not sure where to post this query, and there doesn't seem to be a good place to ask questions regarding iPlayer and the Mac, but I thought I'd try here.
I have tried using the PS3's iPlayer, and for the most part it's good, but sometimes fails to have some of the content the normal iPlayer site has (bizarrely).
To try and sort this problem, I've downloaded iPlayer desktop for Mac, which allows me to download programmes to my mac, but what I really want to do is stream those programmes so that I can watch them on my TV.
I have both an Xbox 360 and a PS3 (and mac software to stream content to both) but the .mp4 files it downloads won't play on either console. The 360 just doesn't see it, and the PS3 sees it but when playing the screen just goes black.
I have tried exporting iPlayer's .mp4 file in another format, but none of my other software will open it [Divx converter, iMovie, Quicktime Pro], let alone convert it into another format (such as .mov or divx for good streaming).
I'm sure that I heard iPlayer uses WMV, but I can't find any way of changing what format iPlayer Desktop downloads.
Any ideas how I can get past this?

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has anyone tried using their keyboard dock on iPad 2?

I'm trying mine out as I write ... it seems to be fine?? Anyone? Anyone?!

Im using the Apple keyboard dock with the iPad 2 right now. Initial thoughts/concerns:
- the iPad seems to want to tip over and out of the dock when using on lap
- some shortcuts (like command+arrows to navigate back/forth on safari, etc) don't work while other do (such as command+c, v, x--the standard ones). My guess is that this limitation was intentional so iPad users don't replace their laptops.

Has anyone TRIED using a 128GB SD card in a Lumia ...

I know the 520 is documented as supporting up to a 64GB card, but has anyone actually tried plugging a 128GB card into a 520?
Thanks in advance to all of you pioneers who choose to forge your own path.

The specs said 64 GB just because at the time there was no 128Gb uSD. There is no difference between the two as far as access so no reason why they should not work. Most specs have since been updated to reflect this.
The 520 has been superceded by then and there's no solid indication/ mention of support. WHy no upgrade to a x3x model which does? If you want to try it's at your own risk but make sure you at least run WP8.1
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Has anyone tried using a MBP with TD at two different sites?

I just got my TD at home and at one at work yesterday. While I love the display and the docking ability it provides, I have encountered an issue that I haven't resolved, I was wondering if anyone else had noticed this.
At home, the TD is positioned to the left side of the MBP, so I was able to orient the display preferences accordingly. At work, I have to position the TD above the MBP. The starting position for the TD is above the MBP. I am wondering if the MBP can recognize that these two TDs are different devices and position them accordingly. It appears not.
Another interesting quirk: At home, the MBP recognizes the built-in mic and speakers and calls them Thunderbolt audio, I believe. At work, it calls them USB audio. I am wondering what other strange differences I'll see.
2011 17" MBP
TD
Snow Leopard (hey, I still run XP under Parallels 6.0 - I like my SW to thoroughly soak before using it)

Here's an update: The Thunderbold Display user interface is broken.
I made sure all the software/firmware was up to date (now they both label the TD audio as USB, interestingly enough - was the shipped firmware with one of the devices newer than that on the web site???). On days when the Moon is full, the MBP comes out of hibernation with the only display on the computer, on cloudy days, the computer comes out of hibernation with the only display on the TD. From 10 minutes after the hour until quarter to the hour, both displays come up, but open Finder windows randomly are placed on one display or the other. On Thursday mornings, the icon locations on the desktop get shuffled like the display resolution was reduced to VGA and then restored. While both the TD and MBP audio and camera work and I can set either to be active, the system has a definite preference to use the TD for audio and camera (except that Facetime only wants to use the MBP audio).
Did Apple let Microsoft get their hands on this?

Has anyone succesfully used home hosted Firefox sync with self-signed certificate in Android? How?

I have Firefox sync running on home server. All other devices (Windows, Mac, Linux, Meego) work fine, but Android (4.2 Asus tablet and Samsung phone) Firefox stops at ssl handshake (referring to Apache logs).

You need to somehow get the certificate on your computer. After that send it to your phone via bluetooth/cable to one of the Documents directories (phone or mem card). After that rename it with the file manager on the phone and open the now .der file. It'll ask you if you want to install the certificate. Btw the link you provided does have a der suffix, but the linkis broken.
Message Edited by jruiseco on 12-Jun-2009 11:08 PM

Has anyone tried a *real* role-link ? - (bea support pls respond)

Hi
Has anyone tried using different role-name and role-link in the security-role-ref section of web.xml.
isUserInRole method fails with this.
given a section in web.xml as:
<security-role-ref>
<role-name>xyz</role-name>
<role-link>abc</role-link>
</security-role-ref>
<security-role>
<role-name>abc</role-name>
</security-role>
u would say isUserInRole("xyz"); right?
but weblogic 5.1 always returns false
it instead behaves properly with isUserInRole("xyz"); which is wrong behaviour.
Please correct me if i am wrong.
thanks
sriram

I don't have a definitive answer, but I would guess you won't find a tech support service dedicated to the Flash Player since it is free software and customers apparently have problems getting tech support for the products they buy. But here are a couple of things worth considering.
Try posting/looking thru the Flash Player forum...
http://forums.adobe.com/community/webplayers/flash_player
Try submitting a bug report...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud? The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to. Help please!

Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud? On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both. What experiences has the community had? I'm also having syncing issues with photos most recently as well as contact updates. (I have an iPhone 4S with the iOS7.1) Thanks much!

It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT5262
If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

How to use the d3.js library with Apex Charting

Hello.
I am using Apex 4.1.0 with Oracle 11gR2 and Oracle App Server (mod_plsql).
I'm trying to incorporate the d3.js library (a visulaization framework) in my Apex charts but am not having much success.
I found this article in which David Mann uses the library within an Apex 4.x application:
http://ba6.us/d3js_application_express_basic_dynamic_action
I replicated his exact steps in my own application but without success. I do not see how he was able to get his application to work. Indeed, the tutorial does not even use a dynamic action despite what the article title says.
Has any one used the d3.js library with their Apex application. If so, would you be willing to share how you went about it?
Thank you very much.
Elie

EEG wrote:
Hello fac586.
Thank you very much for responding/helping.
In the article I referenced I did note David's statement about using a "modern" browser with d3.js (one that recognizes css3 syntax); otherwise, the framework will not respond. And so, I was careful to run my Apex application in IE9.x as well in Firefox 16.x. But all I see is an empty region with a title. No chart. Nothing.
I suspect my one of my problems here is in getting the chart to refresh every "n" seconds. For this, I think the dynamic action would be used, though I'm not sure how to go about doing so.That's included in the sample code (line 99). Strangely Dynamic Actions don't seem to include a native timer event...however there is a plug-in.
More problematic, though, is that I am not seeing any chart whatsoever in the region. I would have expected to see some chart data, even if it is not automagically refreshing.
I've created my example in my EEG workspace on apex.oracle.com:
Workspace: EEG
Username: [email protected]
Password: galaxy (note: all lowercase)
Please see application 27083 called Elie_Goodies, page 25. This page has an associated tab called, appropriately enough, "d3.js Library". The Safari console showed a couple of JavaScript errors.
1. The URL used to include the d3 code in the blog article:
<script type="text/javascript" src="http://mbostock.github.com/d3/d3.js"></script>is returning HTML, not JavaScript. Changing it to that given on the d3js.org site:
<script src="http://d3js.org/d3.v2.js"></script>includes the correct script.
2. There was a syntax error in a script in the Run Code region. I think there was some kind of issue arising from copying from the blog article: it looked like line endings hadn't been respected as the code wasn't formatted properly. Pasting it from the blog into Coda's editor and then into the APEX Region Source text area fixed the format, and it then ran first time.
Thanks for the heads-up. I'll also be looking further into d3.

Has anyone tried using a JavaScript External Library with 64bit InDesign?

Similar Messages

Maybe you are looking for