Has anyone upgraded iPad 2 from iOS 4. to iOS 7?

I need to update iPad 2 from iOS 4.3.4 to iOS 7. Has anyone done this and what problems occurred?

I don't think that the distance from 4.3.4 to 7 is going to be your issue. Remember that the iPad 2 is the oldest device supported by iOS 7, so it may be slow in places.
I don't think I've seen many issues, but you can search here by typing "iPad 2 iOS 7" and see if there's any watchouts.

Similar Messages

Has anyone upgraded GRCPINW from V1000_731 to V1100_731?

Hi Experts,
The business would like to upgrade the current GRCPINW V1000_731 to V1100_731. Has anyone successfully upgraded this components?
I have downloaded the media CD51046221, and see the upgrade and install files therein. But the saint tool doesn't see the files when I place the uncarred files into EPS/in. So just want to know if anyone has been able to do so successfully.
SAP also suggests to use the same media and use the installation option instead of upgrade. But when I try this option I get this error:
There is currently only SP04 available on the marketplace but it asks for SP05.
Any help will be greatly appreciated.
Thanks,
Asad

Hi Johny,
Thanks for replying.
I have downloaded and placed the files in EPS/in but it doesn't like it. I used SUM to try to get it upgraded but I am getting the below error which looks like the same as we saw in SAINT:
Thanks,
Asad

Has anyone upgraded CPS from NW 7.0 to 7.01, 7.1 or 7.2 ?

We had a recent "Health Check" conducted by Redwood, and an upgrade of the Netweaver Stack was one recommendation. The predicted improvements were better use of memory resources (better Java Garbage Collection), and general performance improvements.
Has that been anyone's experience for CPS specifically?

Hi,
Well it is nothing to do with CPS. However upgrade is always comes with new feature and performance improvement options.
On CPS side, if you upgrade from M.26 to M.28 or M.28 to M.33 then it will make sense to look at NetWeaver version upgrade requirement before undertaking upgrade. This is purely based on pre-requisites but nothing to do with performance, if you are not upgrading CPS.
Regards,
Sunil Rohit

Has anyone upgraded their iMac8,1 memory to 6 GB? How did it work?

Has anyone upgraded their iMac8,1 memory to 6 GB? How did it work? Any problems? Did you notice an increase in speed? Who did you buy the memory from?

See this Discussion
rkaufmann87 gave a pretty good reply to you.

Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown?

Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown? After we upgraded our appliances we are having issues with our ESA appliances showing the RAID status as unknown. When we reported the issue to CISCO we were updated there were no issues reported at all. Could anyone please confirm if you have experienced the same issue.

You should see OPTIMAL - meaning the drives in the C170 are in good health/status:
myc680.local> version
Current Version
===============
UDI: C680 V FCH1611V0B2
Name: C680
Product: Cisco IronPort C680 Messaging Gateway(tm) Appliance
Model: C680
Version: 8.5.6-074
Build Date: 2014-07-21
Install Date: 2014-07-29 11:16:34
Serial #: xxx-yyy1611Vzzz
BIOS: C240M3.1.4.5.2.STBU
RAID: 3.220.75-2196, 5.38.00_4.12.05.00_0x05180000
RAID Status: Optimal
RAID Type: 10
BMC: 1.05
There are times post-reboot, that you'll see and get notification of RAID sub-optimal --- meaning that the appliance is running through on a health-check of the appliance's RAID. You should be getting a notification once RAID status has returned to OPTIMAL, or as per the older OS revisions, READY:
myc170.local> version
Current Version
===============
UDI: C170 V01 FCH1428V06A
Name: C170
Description: Cisco IronPort C170
Product: Cisco IronPort C170 Messaging Gateway(tm) Appliance
Model: C170
Version: 7.6.3-019
Build Date: 2013-06-09
Install Date: 2014-09-12 13:52:24
Serial #: xxxxxxD87B39-yyyyyy8V06A
BIOS: 9B1C115A
RAID: 02
RAID Status: READY
RAID Type: 1
BMC: 2.01

I'm having the same buffering issues that other users are having when I try to send a short video from my Iphone 4S to my Apple TV. Has anyone heard back from Apple on this bug ?

I'm having the same buffering issues that other users are having when I try to stream a short video from my Iphone 4S to my Apple TV
Has anyone heard back from Apple on this bug ?

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Has anyone upgraded your MacBook Air SSD? Is it possible?

Just out of curiosity, Can you upgrade your SSD? Have any of you upgraded your SSD in your Mid 2012 MacBook Air? If so, what did you use and how much can the 2012 Air SSD take?
THANKS

This is what I found below on the OWC site. My Macbook Air is 5,2 and it says that it is compatible. I checked the video and looks pretty straight forward. I am just looking for what people's experiences were and what the outcome was... Has anyone upgraded their SSD to 1TB? Good or bad idea?

Has anyone had Ipad air go completely black screen? And now won't even turn on.

Has anyone had Ipad air go completely black screen and you can't even turn it back on?

Yeah try power and home button for several seconds.

Has anyone experienced invisible folders after update to iOS 8.1.2 and subsequent restore from backup on an iPhone 5?

It's apparent that a folder that was visible on my iPhone 5 while running iOS 8.1.1, is no longer visible after an update and restore on iOS 8.1.2. The folder had several apps I used regularly. They must be on the phone, because after initiating a 'Spotlight Search' for apps in they now invisible folder, the appear listed in the results.
Has anyone had this occur on their phone after an upgrade to the new iOS version? Is there anyone that can suggest at 'fix' or should i just try to restore again?
Thanks In Advance,
Fabian

So you have checked all of the home screens and the folder does not exist? I've not witnessed hidden folders. Try a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone reboots, see if you can locate it. If not, then you can go to Settings>General>Reset>Reset Home Screen Layout. This should remove all apps from folders and reset your home screens.

Has anyone upgraded to lp9 from lp7.2..

Has anyone tried to upgrade from lp 7.2 to lp 9 yet?....did u need the dongle in to do the upgrade or the xskey serial number?...im plannin on getting a new macbook pro laptop and i have lp7.2...i dont want to reinstall lp 7.2 then install lp9..how would i do this upgrade?....i have heard of using the seial number on the xskey to putting in the dongle b4 u install which is correct?..remember this is a first time install on a new macbook pro laptop.

Install LP9. The installer will first ask you for your LP9 serial, then it will ask you to insert your XSkey to authenticate your LP7 licence.
That's it, no install of LP7 is necessary.

Has anyone updated ipad 1 to 5.1?

just wondering if i should. i remember all the problems with the last update and im worried. Also has anyone did 5.1 to ipod4? for both please let me know if you have had any problems....thanks/

Was able to update iPad 2 and iPod Touch 4th Gen OTA to 5.1 with no problems.
Both devices have been working great since updating to 5.1 with no issues thus far.
I updated both devices to 5.1 the next day after it was available, and again haven't been experiencing any issue(s).
Also, both my devices even power off faster, when it would take each device sometimes up to 15-20 seconds.
iOS 5.1 is GREAT!!!!!

Cant activate my iPhone 3gs after upgrading it from 4.1 to ios 5, it says no sim card insert?

upgraded from 4.1 to ios 5, it was jailbroken before i upgraded it and i used another phone-card while jailbroken and now i've switched back to the original and it doesnt work whats the problem?

yeah exactly, unlocked.. i could use any carrier's sim card.. thereal, what should i do now? is there anything i can do? i just wanted to upgrade it to ios 5 and then jailbreak it again and unlock it so i can use any carrier again

My wife has bought an iPad from a friend. My wife has an iphone with an iCloud account. When trying to connect to iCloud from the new iPad it says her username and password are not authorised. Any help

MMy wife had bought an iPad from a friend. My wife already has an iPhone, which is registered to iCloud. She cannot acces iCloud from the new iPad. It says her username and password is not authorised. What do we need to do.

This could be a couple different things.
     The device is not authorized to the Apple ID.
         Continue setup for the ID on the device.
There is an account issue
        Is she able to get signed in at
               Appleid.apple.com
                   and manage the account
Can she get signed in at
Supportprofile.apple.com ?
         How many devices are registered to that Apple ID?

HT204347 Has anyone ever booted from an external drive? System 10X6+

Has anyonetried to boot computer with removable drives? or any body knows?
My super drive broke down. I replaced it with external. How do you boot from this drive. Pressing "C" is ineffective?
don't have another Mac, so Target Disk Mode is not an option. Any advice ? I paid 80.00 for the same problem the last time. I ran this progam bundled with the drive called DriveGenius to rid my hard drive of binarys (Intel and 64) localizations, duplicates within the system, and what I thought were two systems, a 10X6.8 and 10X63. When the .8 wasn't working right, and I couldn't fix it-or find an answer for it--I figured I would go back to the 10X6.3 But no. I changed it in the system preferences (only the dock responded to commands and the tab bar's secondary files. so I rebooted. Nothing but I blue screen. I know it doesn't have to be erased, like they did before. for $80.00 and waiting 4 days something they 'fixed' in 20 min?
Thanks for you comments and advice in advance.Thanks for listening. I'm using the PC I had before, and I'm wondering has anyone tried or heard of using PC to/from Mac? I have Drive Genius and it boots for both system. The CD?DVD drive is broken here too. so we're back to the 1 st question

I wonder... Can you use the carburator from your Grampa's wheels on your new car? "No way!", you'll say; it's a whole different ballgame. But you can still use the stereo, the speakers (if not busted) or even the GPS, right? Maybe the core of the old vehicle (engine & its management, transmission, chassis, suspension) can't be used in a modern car, but many of the accessories can. Same thing here: the newest Macs have the latest from Intel, which is a world apart from processors 2-3 generations ago. And the Operating System that talks directly to the hardware has to follow suit.
At First Start, the Setup Assistant did give you the option to migrate your stuff from the older computer. Were it a Mac, settings, files and compatible applications could have been transferred over (in many cases, even with their registrations or activation codes). Had it been a PC, only files and compatible settings could have likewise moved over. If that wasn't taken advantage of at the time, two options remain for getting the stuff over without too much hassle:
Run Migration Assistant and use that instead. Migrating user accounts and files contained in their Home directories can be tricky if they are named the same as those already on the new Mac, but apps and non-personal files (not in duplicated Home directories) can transfer fine.
Reinstall the OS to redo the First Start.
And FYI, a new Mac from last week will ONLY run the latest Mavericks.

I have PR cs6 and my mac has recently upgraded itself from iPhoto where i imported all my photos and film from to "photos" now all of my current project is showing 'media offline' AAAAARGGGH!! now i can't see anything. the audio is fine but everything els

can anyone help me get all of my edited holiday video visible again? my mac upgraded itself from iPhoto where i keep my imported video and photos, to "photo" now all of my current project (and probably old ones as well! ) are showing media offline. how can i get this back seeing the clips on 'photo'?

When you open a project you need to point PPro to the new media location and relink
>mac upgraded itself from iPhoto
THAT is not good... I am Windows, but at least a Windows update gives ME the option of unchecking an update

Has anyone upgraded iPad 2 from iOS 4. to iOS 7?

Similar Messages

Maybe you are looking for