Has anyone upgraded to lp9 from lp7.2..

Has anyone tried to upgrade from lp 7.2 to lp 9 yet?....did u need the dongle in to do the upgrade or the xskey serial number?...im plannin on getting a new macbook pro laptop and i have lp7.2...i dont want to reinstall lp 7.2 then install lp9..how would i do this upgrade?....i have heard of using the seial number on the xskey to putting in the dongle b4 u install which is correct?..remember this is a first time install on a new macbook pro laptop.

Install LP9. The installer will first ask you for your LP9 serial, then it will ask you to insert your XSkey to authenticate your LP7 licence.
That's it, no install of LP7 is necessary.

Similar Messages

  • Has anyone upgraded iPad 2 from iOS 4. to iOS 7?

    I need to update iPad 2 from iOS 4.3.4 to iOS 7. Has anyone done this and what problems occurred?

    I don't think that the distance from 4.3.4 to 7 is going to be your issue. Remember that the iPad 2 is the oldest device supported by iOS 7, so it may be slow in places.
    I don't think I've seen many issues, but you can search here by typing "iPad 2 iOS 7" and see if there's any watchouts.

  • Has anyone upgraded to MBP from Macbook..how much better is it?

    I currently have a Macbook..1st generation Core Duo, I am very happy with it, has been relatively problem free apart from the RSS (Apple Service fixed this so no complaints). When I bought this it was supposed to be an interim measure that would do until I returned home to the UK after working abroad for a few years afterwhich I intended to then buy either an iMac or Mac Pro. I am doing a lot of video editing (hours and hours of DV tapes to get through!) and was hoping to use Final Cut Express. I have now just found out that I may be posted abroad again so I am now rethinking and considering a Macbook Pro. I really want a good upgrade from the Macbook as although it is a great little laptop for most things I feel that I need a lot more speed, better graphics and screen for the video work. How does a MBP compare to say an iMac, and how much of an improvement can I expect after the Macbook? It would not be impossible to have a desktop shipped to my next post but I am not sure I want to trust the movers not to break it and feel better taking a portable with me, but I have so been looking forward to getting a better spec'd Mac.
    What to do...? Will I be happy with a MBP as an alternative to an iMac?

    I've just done the same thing you're thinking about doing. I have a first gen Core Duo BlackBook. I absolutely love it. I was in the market for something with the Santa Rosa chipset and beefier graphics capabilities. I was looking at PC notebooks... but I couldn't find anything in the price range of the MacBook Pro that was similarly spec'd and with a similar form factor. The days of Apple notebooks being overpriced are long gone with their move to Intel. Unfortunately... many people still equate Apple products with being over priced. Anyway... I almost "settled" for an HP notebook that was about $500 less than the MacBook Pro. It didn't have nearly the MacBook Pros beautiful svelte form factor... it had an Intel Core 2 Duo 7300 (which is in the high end of PC notebooks sporting the Santa Rosa chipset), it had an integrated GPU (albeit the newer one that is part of the Santa Rosa chipset... better than the GMA950... but not as good as a dedicated solution... especially the bleeding edge nVidia GPU in the MacBook Pro)... I think I almost ordered the thing about a half dozen times but kept talking myself out of it. I finally decided to go with the MacBook Pro. It just seemed silly to go with a PC. With either a MacBook or a MacBook Pro... you're basically getting two computers for the price of one... a Mac and a PC. Getting a PC notebook seemed like a waste of money. I ended up getting the base model MacBook Pro. It was a little more expensive than I was looking to spend at about $2,000... but dollar for dollar, it was the best value out there. Using the Migration Assistant to move my data over from my MacBook was a snap (I was actually surprised at how well it worked). It's faster and cooler. The one issue I always had with my MacBook is that the fans revved up to pretty loud levels when the system was under a moderate load. The MacBook Pro runs nice and quiet... only revving up the fans when the load/temp gets to a level that I would consider it normal to do so. The keyboard is a matter of preference. I like the MacBook keyboard... and I like the MacBook Pro keyboard... I can't say I prefer one over the other. The backlit keys are kinda cool on the Pro... though I don't typically find myself using my computer in an environment dark enough to have the backlighting come on. Another thing with the BlackBook was the finish... those things attract fingerprints like no ones business. The aluminum case on the Pro is great... scratch resistant and not prone to showing fingerprints at all. I also don't worry about my MacBook as much as I used to now that I have my MacBook Pro. I feel comfortable with being a little more rough with it... and I don't worry about washing my hands right before using it each and every time to avoid getting prints on it. I love my MacBook... but I love my MacBook Pro even more. It basically eliminated everything that I had an issue with on my MacBool.

  • Has anyone upgraded their iMac8,1 memory to 6 GB?  How did it work?

    Has anyone upgraded their iMac8,1 memory to 6 GB?  How did it work?  Any problems?  Did you notice an increase in speed?  Who did you buy the memory from?

    See this Discussion
    rkaufmann87 gave a pretty good reply to you.

  • Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown?

    Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown? After we upgraded our appliances we are having issues with our ESA appliances showing the RAID status as unknown. When we reported the issue to CISCO we were updated there were no issues reported at all. Could anyone please confirm if you have experienced the same issue. 

    You should see OPTIMAL - meaning the drives in the C170 are in good health/status:
    myc680.local> version
    Current Version
    ===============
    UDI: C680 V FCH1611V0B2
    Name: C680
    Product: Cisco IronPort C680 Messaging Gateway(tm) Appliance
    Model: C680
    Version: 8.5.6-074
    Build Date: 2014-07-21
    Install Date: 2014-07-29 11:16:34
    Serial #: xxx-yyy1611Vzzz
    BIOS: C240M3.1.4.5.2.STBU
    RAID: 3.220.75-2196, 5.38.00_4.12.05.00_0x05180000
    RAID Status: Optimal
    RAID Type: 10
    BMC: 1.05
    There are times post-reboot, that you'll see and get notification of RAID sub-optimal --- meaning that the appliance is running through on a health-check of the appliance's RAID.  You should be getting a notification once RAID status has returned to OPTIMAL, or as per the older OS revisions, READY:
    myc170.local> version
    Current Version
    ===============
    UDI: C170 V01 FCH1428V06A
    Name: C170
    Description: Cisco IronPort C170
    Product: Cisco IronPort C170 Messaging Gateway(tm) Appliance
    Model: C170
    Version: 7.6.3-019
    Build Date: 2013-06-09
    Install Date: 2014-09-12 13:52:24
    Serial #: xxxxxxD87B39-yyyyyy8V06A
    BIOS: 9B1C115A
    RAID: 02
    RAID Status: READY
    RAID Type: 1
    BMC: 2.01

  • Has anyone gone to Europe from US and used the IPAD charger with only a plug adadpter and had no problems?

    Has anyone gone to Europe from the US and used the IPAD charger with only a plug adapter?  I want to be sure I won't burn up my IPAD.

    Just using an adapter will be fine.  The charger can handle to 220V just as well as the 110V

  • Has anyone upgraded your MacBook Air SSD? Is it possible?

    Just out of curiosity, Can you upgrade your SSD? Have any of you upgraded your SSD in your Mid 2012 MacBook Air? If so, what did you use and how much can the 2012 Air SSD take?
    THANKS

    This is what I found below on the OWC site. My Macbook Air is 5,2 and it says that it is compatible.  I checked the video and looks pretty straight forward. I am just looking for what people's experiences were and what the outcome was... Has anyone upgraded their SSD to 1TB? Good or bad idea?

  • Has anyone lost the info from games with the new iOS7? My games reset to level zero! Argh!

    Has anyone lost the info from games with the new iOS7? My games reset to level zero! Argh!

    Restore from your iTune Backup.

  • Has anyone recovered their photos from the emptied trash can

    Hi there, I lost all my photos, they seemed to be linked to the trash can, has anyone successfully recovered photos from the emptied trash can????

    Thanks for the reply, how much is expensive???? Is there one you would recommend?

  • HT201274 Has anyone taken an iPhone from USA to Europe and switching SIM cards?

    Has anyone taken an iPhone from USA to Europe and switching SIM cards?

    SacramentoFred wrote:
    Has anyone taken an iPhone from USA to Europe and switching SIM cards?
    Yes

  • Has anyone upgraded GRCPINW from V1000_731 to V1100_731?

    Hi Experts,
    The business would like to upgrade the current GRCPINW V1000_731 to V1100_731. Has anyone successfully upgraded this components?
    I have downloaded the media CD51046221, and see the upgrade and install files therein. But the saint tool doesn't see the files when I place the uncarred files into EPS/in. So just want to know if anyone has been able to do so successfully.
    SAP also suggests to use the same media and use the installation option instead of upgrade. But when I try this option I get this error:
    There is currently only SP04 available on the marketplace but it asks for SP05.
    Any help will be greatly appreciated.
    Thanks,
    Asad

    Hi Johny,
    Thanks for replying.
    I have downloaded and placed the files in EPS/in but it doesn't like it. I used SUM to try to get it upgraded but I am getting the below error which looks like the same as we saw in SAINT:
    Thanks,
    Asad

  • Has anyone successfully transferred contacts from a Blackberry to an iPhone?

    Has anyone successfully transferred contact info from a Blackberry to an iPhone?

    Hi Friend,
    If it's possible to export contacts from Blackberry to the SIM card, then you can place that SIM card into iPhone and import them to iPhone (settings>>mail,contacts,calendars>>import contacts from the SIM Card.
    Hope it helps

  • Has anyone removed the stand from the monitor?

    I love my 30" Cinema Display, but it sits too high on my desk, and find myself tilting my head up to see towards the top of the screen. I hate the thought of modifying the work of art that it is, but if I removed the stand, it would sit perfectly at eye-level. Obviously, I would have to make a stand/support to allow it to be free-standing. Either that or modify the desk itself. Has anyone tried removing the stand from the monitor? Feedback?

    As NullUnit mentioned, it is quite easy to remove the stand but you will need the VESA adapter kit to replace it. This will give you the standard 100mm VESA mounting holes that you would then connect to any mounting arm you wish.
    Personally I bought this MX Desk Mount Arm as it was rated to hold the weight of the display (~30#) whereas others were not (~18#). I originally mounted the display in a vertical/portrait orientation but the arm didn't go high enough so I had to mount a 6" block of wood to my desk first. I enjoyed the monitor so much that I have since moved it to become my primary monitor. The arm allowed me to lower the display all the way to my desk so I could just look over it (to watch TV). Couldn't have if it was still on the stand.
    Hope this helps.

  • Has anyone felt the heat from their monitor?

    I have a Penryn 2.8 GHz 24" iMac and I park my face fairly close to the screen (about 12 inches (30.5 cm) and I can feel the heat of the screen.
    I took temperature readings with a lab thermometer on 9 points distributed on a grid across the screen and it averages about 103 degrees F(39.4 C), ranging from 101 F (38.3 C) to 107 F (41.6 C). These measurements were taken while the computer was idle with just the screen saver running and the brightness at maximum.
    Has anyone felt the heat of their screen like this? Has anyone ever tried to measure it?
    Where does all the heat come from, is it all derived from the backlight or from the computer itself (107 is from the upper left and the 101 is from the lower right)?

    You might be interested in running SMCFanCOntrol to keep your temps down. I'd recommend keeping the HD under 50C and the Power Supply under 60C.
    http://www.versiontracker.com/dyn/moreinfo/macosx/31029
    Here's mine for reference:
    http://ftp.georgetek.com/George/Temps_Before.png
    http://ftp.georgetek.com/George/Temps_Current.png
    http://ftp.georgetek.com/George/SMCFanControlDefault1.png
    George

  • Has anyone tried the suggestion from the macfixit site

    see my earlier post, "painfully slow connection".
    Has anyone tried installing the combo 10.4.5 update from the mac support site.
    my imac came with 10.4.4 so I assume autoupdate just installed the latest delta, but perhaps there is a problem with the installer and an incorrect library version was linked with the library. Just surmizing , but that could cause a problem.
    Anyway reinstalling the update won't hurt anything I don't think anyway.

    I tried it and it didn't do anything noticable. At first I downloaded the PPC version by mistake and it wouldn't accept it. A little more digging turned up the intel version. But again no change.
    What I found that is working for me is setting up my router to work in "b" wireless mode instead of "g" or "b/g". It has solved the problem for now and since the speed to the router still exceeds that of my ADSL line I have noticed nothing but fast and consistent internet access.
    Mike

Maybe you are looking for