Has anyone used an Otterbox Commuter Case for the iphone 4s on an iphone 4?

I want to get a new case for my iphone 4 and have previously had an Otterbox Commuter Case which I loved due to it's dust covers for the headphone and charger sockets. I much prefer the look of the new commuter case for the 4s around the camera and flash over the one for the 4 and was wondering whether anyone had put their 4 into the 4s case?
If so, is it ok?
Is there another similar case that has the plugs for the sockets that I'm not aware of?
Thanks, Niki

You can put your iPhone 4 in a 4S case and it will work just fine. You shouldn't put a 4S in a 4 case (like the Otter Commuter) since the camera sensors are different.

Similar Messages

Has anyone noticed that the Otterbox Defender case for the Droid Maxx is not manufactured correctly?

After ordering 2 cases from Otterbox directly, and having to send both of them back, I called a Verizon store and had them compare the Otterbox Defender case for the Droid Maxx to the actual phone. They were surprised to note that the hole for the camera on the case (to the left of the speaker) was on the opposite side of the camera on the phone (to the right of the speaker). And, there is no hole for the camera's sensor on the Otterbox case.

Then return it to an Apple Store and complain and if neccessary get your money back

Has anyone created a NI-VXI driver for the Ardence RTX operating system?

Has anyone created a NI-VXI driver for the Ardence RTX operating system?
a VXI instrument through a PCI-VXI-8335 card (in the PC) talking to a PCI-VXI-8345 card (in the VXI chassis) via MXI-3, Has anyone created a PCI-VXI-8335 card driver for the Ardence RTX operating system?

Now i want develop driver on RTX,my hard platform is similiar(PCI8335+VXI8340+1418A),and after i read the PCI baseaddress,i find PCI8335 only has memory-map,so that means if i want to driver this board ,so i take following steps list below:
1.use Rtmapmemory() to map the baseaddress to virtual address
2.using memset() or memcpy() to driver the 1418A board
is this right?
if you can give me some hints,thanks
or you can contact me :[email protected]

HT204387 Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Send this to:
newsgroups.bea.com / security-group.

Has anyone used bluetooth hotspot in car for ichat

Has anyone used ichat on ipad through bluetooth conntection in car?

You might try the [Approval Workflow Engine (AWE) for HCM 9.0|https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=747740.1&h=Y] red paper. You can find it on Metalink3 at [https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=747740.1&h=Y|https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=747740.1&h=Y].

Has anyone used switch control and siri at the same time?

Has anyone used accessibility switch control and siri at the same time?

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

Can anyone recommend a good underwater case for the iphone 4?

I'm looking for an underwater case for the 4s, want to be able to use camera for photo and video?

Its called the iCarPlay http://www.monstercable.com/computer/productPageComputer.asp?pin=2084
It's pretty simple theres 8 preset stations you can use, there is always at least one that comes through clearly, It works great for me, but it depends more on where you live.

Has anyone used more than one event for one project?

Hi,
I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it. I waited to see if I would get used to it. But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'. The separation of the media and projects creates more problems than solutions with my workflow.
The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same. The new Event and Project system adds complexity to organization and archiving. I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly. I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
Has anyone out there used more than 1 Event for 1 Project? Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project. I don't need to use the media from multiple Events for the same Project. And I've never used it for a reason. I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project. I think we should bring back the connection between Events and Projects in a meaningful way.
This is a throw back to the older days, but that's not always a bad thing. Let us keep our projects, or timelines, in the Events folder. Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section. Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
Thanks,
- David

My original fear was that FCPX was just going to be iMovie Pro... It so is not!
People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows. For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder. I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
But that's me.
Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.] You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

Has anyone used this 3000mAh battery case?

Hey guys, check this out.
I love my iPhone4 and compared with other phones Apple did a great job with battery life, but I'm a traveler and sometimes I take long runs without getting a chance to charge the phone. Looking into buying this battery case here: http://www.mugen-power-batteries.com/apple/iphone-4/mugen-power-3000mah-battery- case-for-apple-iphone4.html
Has anyone dealt with these guys before? I asked them questions on their Facebook, they seem legit.

They have a 1500mAh case as well for 79$ http://www.mugen-power-batteries.com/mugen-power-1500mah-battery-case-for-apple- iphone4-brown.html
The reason I want to go with Mugen is that they are present as a brand. I'm a little picky and if I get a bad case I'd want a replacement. In that case I can ask them on facebook about it or write to support.
Can you let me know any other case makers? I don't want to buy from ebay

Has anyone used Timpsons phone repair service for a replacement screen on iPhone 4S?

My iPhone 4S has a. cracked screen, but still works OK.
Can anyone comment on Timpsons repair service? It will cost £40 for the repair, but they do use real glass, not just a plastic screen.

If your phones is in waranty then thats a bad move. Other wise I cannot comment on non Apple repairs, and dont feel this forum is the best place for that. iPhones use specially toughened glass with a Oleophobic coating, I would not trust 'glass' to be that. Also if you break your phones dies and you need a out of warranty replacement you wont get one buy going down this path.

Has anyone used Paragon NTFS or Tuxera for Median and Project Files

I have read lots of discussions about why this is not a good idea but my two options are to do this or switch to Sony Vargas for everything so it would be good if people could let me know if they have had this working successfully.
So has anyone successfully used either of these 2 NTFS drivers to edit SD/HDV or Prores projects on? My only experience has been using SD footage on an NTFS drive with the free NTFS-3G drivers. This worked fine as long as project files were on non NTFS drive (for same reason if I saved project on NTFS is saves a file with a size of zero bytes).
Regards,
Ben
PS I wonder if this thread will stay on topic;).

Macs can read drives that are formatted in NTFS as is. The software you mentioned enables a Mac to write to those drives. That said, you should edit using drives that are optimized for FCP and formatted Mac OS Extended.
Nothing to stop you copying the media from an NTFS drive to work with and then copying the finished result back.
As you are now in the position of having to do this, why not do a test and report back with your results?

Has anyone used Firefox Sync and Xmarks at the same time?

Firefox is my primary desktop browser. On my desktops, I use Xmarks because I use Firefox, IE and Chrome. It enables me to keep my bookmarks synced across browsers as well as use home/work profiles, etc. However, I'd like to use Firefox Sync so I can sync the bookmarks to my smartphone. Has anyone successfully tried this? I thought I'd ask before trying it myself just in case. Thanks!

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

Has anyone come up with a solution for the WD Passport and Mavericks OSX issues yet?

I was wondering if anyone has come up with a solution for the newer Macbook Pro/Mavericks and external WD Passport not mounting problems?
I have a couple of year old WD Passport that worked fine in my old 2009 Macbook Pro, the problem is the old computer crashed.
My dilemna; My new 2014 Mackbook Pro will not open my WD Passport, called WD Support, their answer, sorry, nothing has been solved.
Is there anyway I can get access to my files on the Passport with any other software, or by using a PC.
I am aware of reformatting the HD, and have read all the forums I could find and have tried installing the WD Update as well, (with the support tech from WD) and nothing works.
I know that my WD Passport works, so please don't suggest checking it, or the cord.
I appreciate all the help anyone can offer, and I am with all the rest of you struggling for solutions.
Thanks so much

Hi everyone, this is what I did
1. upgrade disks to the latest firmware
2. de-install ntfs-3g and MacFuse.
3. Re-install NTFS 3G without Macfuse.
4. Next step: Install OSXFUSE latest version with selection MacFUSE compatibility layer.
5. Last step: Install Fuse Wait
Note: between steps 2 and 5, I restarted my machine.
It worked for me, after about 4 hours.

Has anyone had to create a WSDL for the UCCX API integration?

We are struggling with creating a WSDL for the UCCX API for integration with an external webservice, as the UCCX isn't a true webservice. Has anyone created a WSDL for this type of integration? Thanks!

Thank you Gergely! I don't think I worded this very well. We have an http trigger that accepts several parameters from the client (see screenshot for example). The http trigger works with several other scripts and uses the UCCX API to manage an outbound IVR campaign.
They are asking us for a WSDL for this interaction. We explained that this is not a true webservice; it is a simple POST but we wanted to put it out to the community to see if anyone had any insight/ideas. Thank you again for always taking the time to respond!

Has anyone yet found a workable replacement for the Yahoo Widgets for iCal?

I was extremely happy using Konfabulator/Yahoo Widgets iCal Events widget, leaving it on my desktop so I could see my daily calendar and To-Do's without visiting any apps. But since Leopard, it doesn't work, and I've yet to find a workable alternative. Has anyone found an adequate replacement?
I don't like the Apple Dashboard widget, as I want it permanently affixed to the Desktop, underneath all other windows. The YW solution was perfect, and it's bizarre that no-one else seems to have replicated it - or even Apple themselves?

Here is how to put Mac widgets on your desktop: http://discussions.apple.com/thread.jspa?messageID=6292560&#6292560
And here is a iCal widget: http://benkazez.com/icalevents.php
It doesn't put your to-do list on there, so there is this widget: http://www.bluehenley.com/products/dobedo/
Hope this is more of what you wanted.

Has anyone used an Otterbox Commuter Case for the iphone 4s on an iphone 4?

Similar Messages

Maybe you are looking for