Has anyone used an USB ASIO driver with LabVIEW ?

Anyone has already tried to use LabVIEW to get data from USB audio recording equipment (M-Audio Quattro)?
RKO

Hi,
NI-VISA 3.0 is the only driver in LabVIEW that would give you access to an USB device. You would probably use NI-VISA USB Raw mode.
To use the VISA driver you need to know in detail how the device works and how to program with USB. There isn't too much documentation, but if you are clear on those two things it should be easier to get familiar with the NI-VISA API.
You'll need the USB specification (www.usb.org). Also check the NI-VISA Programmer Reference Manual
Hope this is what you are looking for.
DiegoF
National Instruments.

Similar Messages

Has anyone used a USB device server with a DAQmx or NI-VISA USB device?

Hi,
I have an application where I need to communicate with USB devices (some through DAQmx, others through NI-VISA) that will be more than 15 feet away from the controlling PC. I could use USB-ethernet-USB dongles, but I also see that there are USB-over-ethernet device servers available (like this one: http://www.usbgear.com/computer_cable_details.cfm?sku=USBNET-400&cats=104&catid=187%2C188%2C104%2C65...). Has anyone used these or similar USB device servers successfully with LabVIEW?
Thanks,
JasonP

http://forums.ni.com/t5/Multifunction-DAQ/Does-NI-offer-USB-extension-solutions/td-p/381873
http://forums.ni.com/t5/Dynamic-Signal-Acquisition/Using-a-quot-USB-2-0-extender-over-Cat-5-quot-to-...
http://forums.ni.com/t5/Multifunction-DAQ/Can-I-use-a-USB-Extender-with-USB-6008-or-cDAQ/td-p/920361
Let me know if you have any more questions.
Product Support Engineer
National Instruments

Can I use a USB thumb drive with iPad

Can I use a USB thumb drive with iPad2

What do you want to do with the thumb drive?
If for picture/movie files, You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

HT204387 Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Send this to:
newsgroups.bea.com / security-group.

Has anyone used a boxware keyboard buddy with their iphone?

has anyone used a boxware keyboard buddy with their iphone?

kj6tk wrote:
I guess if you travel the iPhone is not the device to buy.
And which device to buy for travel? As far as I know other smartphone platforms even don't have an update facility like AppStore. And by the way what are your criteria for the perfect travel phone? I would place being able to use it in other countries (world phone), having easy access to internet and email and ability to remotely sync Contacts and Calendar on top of my list. All of which iPhone is capable like few other phones.
I'm sorry, John, but your statement seems like utter nonsense and is misleading for others. First being able to update apps doesn't cross my mind as a main functionality for travel. Second I was just travelling to SC and easily installed a new app from iPhone and updated an existing one. In your case I believe there's a mishap with AppStore. Probably you have a false update notification. Just compare versions of the apps you have with the versions of the same apps AppStore shows. I bet version are same. That's why it doesn't let you install.
If you want to sync your iPhone Contacts and Calendar (which seems more like a genuine travel requirement) you can do it via MobileMe or Yahoo and few other similar web services.

Has anyone used the Seagate wireless plus with an iPad?

I would like to use this wireless external drive to store videos and then stream them to my iPad. Has anyone used this drive and if so how do you like it?

Hi everyone,
I am frustruated with the Seagate Wireless Plus. I think most of you just download movies in it and then watch it on your tablet. I thought this can be my external storage for everything including the content of my iPad. Not so easy!!! I can't see anything from the content of my iPad when I connect it wirelessly to Seagate. I wrote to Seagate and apparently there is another thing called WebDav in order to do it. I think Windows are winning here how easy it is to connect devices. Simply, I can see the demo stuff from the Seagate on my iPad but nothing the other way, no pictures, no music, no videos stored on my iPad can be seen from the Seagate. If there is somebody who can explain to me how to do it before I will return the Seagate to the retailer please do it in a way normal people understand. Don't say "I think" as most of people in these forums do, please say only "I know" and lead me step by step what to do. I have the latest iPad mini with iOS7, 32GB WiFi & Cellular with Retina display. I've already updated the Seagate OS to 2.2.0.005 exactly as they advise by installing the 2.1.0.014 prior to that.
Please forgive me for the tone but those 10 hours I spent so far without any results are too valuable to me.
Thanks in advance. Danny.

Using a usb thumb drive with a mac

So, I'm a recent windows user and when using a USB thumb drive, if you erased something, it would automatically update the thumb drive and show the right amount of free space.
I've noticed with the mac, if you delete an item, it doesn't update, and you need to go into disk utility and format in order to show the appropriate amount of free space.
Is there an easier way to do this?
I searched for a few minutes on this topic, but couldn't seem to find anything. All apologies if I missed it.

Choose Empty Trash from the Finder menu, or from the menu which appears when you control-click or click and hold on the Trash icon in the Dock.
(38516)

Has anyone used Canon 5D Mark II with PrPro CS4 yet?

Hi,
Has anyone used the Canon 5D with CS4?
Do the files open ok?
Just wondering as I am going to hire the camera for a day as the footage is amazing!
Best wishes,
scott mackenzie

There are plenty of great threads on this material. As John points out, most will pop right up. Be sure to read replies by Jeff Bellune and also PaulieDC. This ARTICLE has some links to useful info on this camera.
Good luck,
Hunt

Has anyone used "Final Cut Library Manager" with FCP X 10.1?

I've just noticed this inexpensive app which looks interesting.
http://www.arcticwhiteness.com/finalcutlibrarymanager/
Has anyone used it?
Comments?

I assume you are referring to Event Manager which I also found extremely good.
On the face of it, this looks rather like EM's successor plus a more "FCP X" looking interface.
At first sight it promises to be a "must have" app, but it's only by using it that its true worth and any potential flaws will be revealed.
What's good is that you can download the demo version (not quite fully functional) to try out before you buy.
Message was edited by: Ian R. Brown

Using a usb external drive with logic

I have a 500 GB Lacie usb hard drive which I'm currently using just to backup my system. (Still on Tiger by the way.) I'm in an older intel iMac (1.83. 2 gigs ram, 250 gig internal hard drive). After installing LP 8 and all the bells and whistles on the internal drive I now have less than half of my internal drive space available. My logic project files are there as well. Not a big problem but I'm trying to look further down the road... Usb drives are slower than firewire but my projects are relatively simple. I don't record more than 2 tracks simultaneously and rarely exceed 24 tracks total for a song. Two questions. First can I get by with my usb external drive? And second how do I move my projects onto and external drive and still have logic know where they are? Thanks

I have the oldest macbook (1.83. 2 gigs ram, 60 gig internal hard drive)
I have all my logic content on my external maxtor firewire 400 drive (usb 2.0 is actually faster than firewire 400) and everything is fine. the good thing is if your external drive has 7200rpm, but the ones with 5600rpm should do as well.
Once you drag your apple loops to logic from your external drive, logic will remember for the next visit. And when you are opening a project which is on the external drive , just find it with logic finder and all should be fine.

TA26012 Has anyone used keyring 808 spy camera with an itouch and rendered with good results in final cut pro ?

I am using spy camera 808 which has the same 1280 by 720 H264 AAC as an itouch for filming.
Problems occour in fincal cut pro 6.06 on export if i export 808 on its own no issue the issue is the itouch messes up the time liine on sound video, example 20 min video 10 mins 808 and 10 mins itouch equals 12 mins.
So has anyone actualy with the power pc g5 and final cut pro 6.06 had a method where it is succseful for a simple export to quicktime ?
Just tried it with itouch in final cut and fcpro says does not match settings so i let fcpro choose audio needed render that was it export of 5 mins came out as 30 seconds.
So question stands has anyone found a suitable way to bring in itouch video and export in final cut with out issues.?
ps i brought the video in with "image capture" and iphoto no change.
email here if you would [email protected]

My plan is as follows:
-Make a full backup copy of System Drive on an external drive
-Boot from OS Install Disc > use Disk Utility to Erase/Write Zeros to drive
-Install Snow Leopard
-Install FCP, etc.
-Delete "Capture" directory from external "Scratch Disk"
-Transfer all remaining files to another external drive
-Reformat "Scratch Disk
-Cross fingers
-Begin transcoding process again---frequently checking files for errors
I'll let you know how it goes. Still open to other thoughts and suggestions...
-Ryan

Has anyone used the the Airport Express with their Direct TV unit?

I have a DirectTV HD DVR (HR20) receiver that allows OnDemand, however, I need an internet connection. The problem is my router is in a completely different area of the house. Has anyone tried to connect wirelessly?

Oops...maybe I should mention; I am using the usb because there is no audio input on the mac. Also, I am using a Lexicon Alpha usb interface. I am miking with an Audio Technica 2020.

Has anyone used the EMC storage intergration with VNX?

Based on the encougagement that someone got NaviAgent to work, I wanted to follow up on something else.
We have an EMC VNX 5500 on SAN with HP 580 running OVM 3.0.3. I installed Oracle Storage Connect Integration Module. It looks like it needs an EMC SMI-S provider to make it work right (or so I guess). Can anyone confirm or deny this?
Has anyone ever installed the SMI-S on the linux control station?
By the way, if you ask EMC, they only support it under a "Letter of Support" agreement, which to me feels like "we'll complile it, but you're on your own if you use it."

G'day TechTamer,
I recently setup OVM3.0.3 on a VNX5300 (iSCSI block) without NaviAgent or Oracle Storage Connect Intergration module.
I'd be interest to know if you do actually get the Storage Connect Module working.
Please keep us updated.
Regards,
Alex.

Has anyone used Scribe Online to interact with Eloqua's API?

I've been experimenting with Scribe Online via an ON24 integration and was interested if anyone has queried the activity and contact tables with Scribe Online. So far it's an easy drag and drop between entities, although the complex part is formulas within the logic.
A current test I'm working on is to pull email activity (Email Name that was Opened and the last activity date), link it to a contact with a SFDC Lead ID and then populate that via a field in SFDC. I'd eventually like to experiment with advanced visual reporting to get a true idea on the activity of our database.

does anyone have a answer for this? I'm having the same prob!!

Has anyone used a touch screen monitor with scxi.I am having video lock ups while using LV and MAX

I have a PCI-MIO-16XE-50 daq card (dev1) connected to a scxi-1000 chassis address 0 ID 1, with a scxi-1102,1163,1163,1162 slots 1,2,3,4 respectively.Cable is connected to daq card to 1102 card .Micro touch screen is used on com2. Have tried other serial ports 1,5. Touch screen works fine with windows until LabView and max is installed .Video lockups,Max failures occur.MAX seems to confict with touch screen.

Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

Has anyone used an USB ASIO driver with LabVIEW ?

Similar Messages

Maybe you are looking for