Has anyone used Audition to create .vox files?

How do you use the Batch process to change the sample and bit rate on a file that has already been recorded?

Almost certainly. You can use any program which does what you want: the end product has to be an .mp3 or .m4a file. After that it's a question of making the feed, either writing it yourself or more likely using a program or online service.
Audacity is a useful program, and free, and you can certainly do the sort of things you need to make a podcast. I prefer Amadeus Pro, which costs $59.99 and has recently been updated with better multi-track facilities: I always fled that Audacity was awkward to use by comparison and occasionally flaky, but we're probably splitting hairs here: it would certainly be a good place to start.
You may find my page on making a podcast helpful:
http://rfwilmut.net/pc

Similar Messages

Has anyone used Audacity to create a Podcast on a PC and then make it available on itunes?

Has anyone used Audacity to create a Podcast on a PC and then make it available on itunes? If you have used Audacity is it a good program to use? Any tips or suggestions?

Almost certainly. You can use any program which does what you want: the end product has to be an .mp3 or .m4a file. After that it's a question of making the feed, either writing it yourself or more likely using a program or online service.
Audacity is a useful program, and free, and you can certainly do the sort of things you need to make a podcast. I prefer Amadeus Pro, which costs $59.99 and has recently been updated with better multi-track facilities: I always fled that Audacity was awkward to use by comparison and occasionally flaky, but we're probably splitting hairs here: it would certainly be a good place to start.
You may find my page on making a podcast helpful:
http://rfwilmut.net/pc

Has anyone used Muse to create a static web page that gets translated into Joomla?

Has anyone used Muse to create a static web page (html and xml) that gets translated into a Joomla template?

Obviously I am out of my league. I am not a programer and I thought this would be something simple, but you guys are talking over my head.
I thought I could create a simple link to the Happy.rdp and it would run...but as mentioned, you can't do that.
What I have is a java script with a bunch of parameters (see below) that creates a pull-down menu. I was hoping I could list the names of the servers, click on the one I want to connect to, and I would get the log-in screen. That is my goal.
I have a "Happy.rdp" icon on my desktop and I click on that and the remote connection starts. I have opened "Happy.rpd" in notepad and it has all the parameters (such as the IP address and stuff) that allow me to connect.
* Menu selection script         *
var NoOffFirstLineMenus=2;   // Number of first level items
var LowBgColor='';   // Background color when mouse is not over
var LowSubBgColor='b0b0b0';   // Background color when mouse is not over on subs
var HighBgColor='';   // Background color when mouse is over
ETC...
// Menu tree
// MenuX=new Array(Text to show, Link, background image (optional), number of sub elements, height, width);
// For rollover images set "Text to show" to: "rollover:Image1.jpg:Image2.jpg"
Menu1=new Array("","http://home.com","",0,20,0);
Menu2=new Array("Servers","","",1,20,115);
      Menu2_1=new Array("Servers","Happy.rdp","",0,20,170);

Has anyone used BC to create a temp agency website?

I need a lot of help! I'm just starting with BC, but I used Joomla for almost every client. I need to create a new site for my client that is on joomla. This is a temp agency and I need to be able to create job applications and a resume uploader as well as a section for companies who need workers to sign up. I don't know if BC is the right solution or not because I've not seen it done on here yet.
Thank you!
Derek Stevenson
Envision Marketing

Almost certainly. You can use any program which does what you want: the end product has to be an .mp3 or .m4a file. After that it's a question of making the feed, either writing it yourself or more likely using a program or online service.
Audacity is a useful program, and free, and you can certainly do the sort of things you need to make a podcast. I prefer Amadeus Pro, which costs $59.99 and has recently been updated with better multi-track facilities: I always fled that Audacity was awkward to use by comparison and occasionally flaky, but we're probably splitting hairs here: it would certainly be a good place to start.
You may find my page on making a podcast helpful:
http://rfwilmut.net/pc

Has anyone used iPhoto to create and sell their high school's yearbook?

Seems like a much more cost efficient way then the companies that are out there. I have worked as yearbook advisor a few years back and hated it. It was expensive, software was not user friendly, and always ran at a loss. I was approached this year to do it and politely said no, but then I thought maybe iPhoto is the solution. Just wondering if it's been done and if there are any "samples" out there. Thanks for any input!

Probably someone has - but they are not likely to be on this forum
I see a few issues
1 - cost per book is high
2 - layouts are limited although you probably can live with that if you want to
3 - you are limited to 100 pages - depending on your schoold that could be a problem
4 - paper is glossy and may be hard to write on
For an overview of layouts available Liz Castro did a great web site for iPhoto '09 - iPhoto '11 is pretty much a superset of these so it gives you some idea of that is available - http://www.iphotobookthemes.com/pmwiki.php?n=Main.HomePage -- as far as I know there is no similer site for iPhoto '11
LN

I can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

i can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

Has anyone used "Microsoft.BizTalk.B2B.PartnerManagement" API ?

Hello, forum; trying to make sense of that undocumented API library to create an agreement using BizTalk 2010. So far, I can create a Partner, Business Profiles, Business Identities and Partnerships, but how to create an agreement (onewayagreements and all
that) still eludes me. I have checked one reference, it was written by Mick Breeze (http://blogs.breeze.net/mickb/2012/05/22/BizTalk2010CreatingTPMPartnersThroughCode.aspx),
and also getting inspired by the newest published in here (http://msdn.microsoft.com/en-us/library/windowsazure/dn232396.aspx) which is not the same but at least it's something.
I have navigated through the classes but I can't manage to do all the tasks that it is suppose to achieve.
Has anyone used this before that may be able to help ? Is there any SDK sample of some sort ?
Thanks in advance.

Partner automation. The user wants to use an asp.net form instead of using biztalk admin console, in order to create and update a large party database, the total count rounding between 300 to 500 partners, so, we have already a webform with all business
related information and we've add some port related information that will ultimately end up as the party information. With that info, this library should be able to accomplish everything we normally do from the console.
We are not migrating from a previous version, so the party migration tools is a no-go. We explored the idea of creating a binding-like file that would be loaded from BtsTask, but ultimately, we end up with the idea of using this obscure library to perform
all those so called duties of handling party related information on biztalk server.
Thanks in advance.

Has anyone used JAAS with WebLogic?

Has anyone used JAAS with Weblogic? I was looking at their example, and I have a bunch of questions about it. Here goes:
Basically the problem is this: the plug-in LoginModule model of JAAS used in WebLogic (with EJB Servers) seems to allow clients to falsely authenticate.
Let me give you a little background on what brought me to this. You can find the WebLogic JAAS example (to which I refer below) in the pdf: http://e-docs.bea.com/wls/docs61/pdf/security.pdf . (I believe you want pages 64-74) WebLogic, I believe goes about this all wrong. They allow the client to use their own LoginModules, as well as CallBackHandlers. This is dangerous, as it allows them to get a reference (in the module) to the LoginContext's Subject and authenticate themselves (i.e. associate a Principal with the subject). As we know from JAAS, the way AccessController checks permissions is by looking at the Principal in the Subject and seeing if that Principal is granted the permission in the "policy" file (or by checking with the Policy class). What it does NOT do, is see if that Subject
has the right to hold that Principal. Rather, it assumes the Subject is authenticated.
So a user who is allowed to use their own Module (as WebLogic's example shows) could do something like:
//THEIR LOGIN MODULE (SOME CODE CUT-OUT FOR BREVITY)
public class BasicModule implements LoginModule
private NameCallback strName;
private PasswordCallback strPass;
private CallbackHandler myCB;
private Subject subj;
         //INITIALIZE THIS MODULE
           public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
                  try
                       //SET SUBJECT
                         subj = subject; //NOTE: THIS GIVES YOU REFERENCE
TO LOGIN CONTEXT'S SUBJECT
                                                 // AND ALLOWS YOU TO PASS
IT BACK TO THE LOGIN CONTEXT
                       //SET CALLBACKHANDLERS
                         strName = new NameCallback("Your Name: ");
                         strPass = new PasswordCallback("Password:", false);
                         Callback[] cb = { strName, strPass };
                       //HANDLE THE CALLBACKS
                         callbackHandler.handle(cb);
                  } catch (Exception e) { System.out.println(e); }
     //LOG THE USER IN
       public boolean login() throws LoginException
          //TEST TO SEE IF SUBJECT HOLDS ANYTHING YET
          System.out.println( "PRIOR TO AUTHENTICATION, SUBJECT HOLDS: " +
subj.getPrincipals().size() + " Principals");
          //SUBJECT AUTHENTICATED - BECAUSE SUBJECT NOW HOLDS THE PRINCIPAL
           MyPrincipal m = new MyPrincipal("Admin");
           subj.getPrincipals().add(m);
           return true;
         public boolean commit() throws LoginException
               return true;
    }(Sorry for all that code)
I tested the above code, and it fully associates the Subject (and its principal) with the LoginContext. So my question is, where in the process (and code) can we put the LoginContext and Modules so that a client cannot
do this? With the above example, there is no Security. (a call to: myLoginContext.getSubject().doAs(...) will work)
I think the key here is to understand JAAS's plug-in security model to mean:
(Below are my words)
The point of JAAS is to allow an application to use different ways of authenticating without changing the application's code, but NOT to allow the user to authenticate however they want.
In WebLogic's example, they unfortunately seem to have used the latter understanding, i.e. "allow the user to authenticate however they want."
That, as I think I've shown, is not security. So how do we solve this? We need to put JAAS on the server side (with no direct JAAS client-side), and that includes the LoginModules as well as LoginContext. So for an EJB Server this means that the same internal permission
checking code can be used regardless of whether a client connects through
RMI/RMI-IIOP/JEREMIE (etc). It does NOT mean that the client gets to choose
how they authenticate (except by choosing YOUR set ways).
Before we even deal with a serialized subject, we need to see how JAAS can
even be used on the back-end of an RMI (RMI-IIOP/JEREMIE) application.
I think what needs to be done, is the client needs to have the stubs for our
LoginModule, LoginContext, CallBackHandler, CallBacks. Then they can put
their info into those, and everything is handled server-side. So they may
not even need to send a Subject across anyways (but they may want to as
well).
Please let me know if anyone sees this problem too, or if I am just completely
off track with this one. I think figuring out how to do JAAS as though
everything were local, and then putting RMI (or whatever) on top is the
first thing to tackle.

Send this to:
newsgroups.bea.com / security-group.

Has anyone used Aperture 2.0 with 8800GT?

Has anyone used Aperture 2.0 with the new 8800GT? I'm about to order a new Mac Pro and wonder if Aperture will get a speed boost with the 8800GT over the HD 2600XT. I've read many times that Aperture is very GPU dependent, but then I've also read, on Barefeats.com for example, that the graphics card really doesn't do that much of a difference after all.
For me, on my dual 2.0 G5 with 4.5GB and a X800XT, what's been most annoying with Aperture 1.5 has been the slow load times for raw images (15-20MB). But now with the quick preview mode in Aperture 2.0, that really isn't an issue any more.
Is the 8800GT worth waiting for, or should I just get the Mac Pro now with the HD 2600XT?

Hi Don
I'm using Aperture 2.0 with the 8800GT. My system is the new MacPro 8 core 2.8GH with 10GB RAM. I'm shooting Nikon D3 lossless compressed RAW files. Approximately 12-14MB each.
I do not need to use the quick preview mode. Images open instantaneously,either fit to screen or 100%. All the image adjustments are shown with no time lag. My D2X uncompressed raw files,19MB, display in approximately one second with quick preview turned off.
I'm no MAC hardware expert so I don't know how much the speed is the result of the 8800GT but I'm just one happy camper.
Hope this helps
John Blake

Has anyone used the appscript modual for python rather than streight AS?

I just discovered appscript and so far I like what I see. has anyone used it?
Does it just wrap around actual applescript commands which it then sends to osascript with a system call or does it use the message system directly? Is there anything that it has not yet implemented that might cause problems?
To me it seems to be a perfect solution to the clutter that AS seems to be... at least from someone coming from more traditional languages.

In startMovie, you need to register the xtra
on startMovie
axRegister(serial code here)
end
Then, on your Record Button, something like this:
on mouseUp me
--start recording session - using 400k as maximum here
errOpen=axOpenRecorder(400000)
--see if there is an error
put errOpen
--save the new audio as a file
errRecord=axRecordSoundToFile("soundName","c:\path\to\soundfile.wav")
--see if there is an error
put errRecord
end
then make sure you close the recorder in stopMovie
on stopMovie
axCloseRecorder()
end
You can also make a Stop Recording button that has code like
this:
on mouseUp me
errStop=axStopRecording()
put errStop
end

Re: Interfaces in Forte - has anyone used them?

We are making use of interfaces extensively and have never had the
slightest problem. Interfaces do not cause any overhead, since they are
mainly a means to support type checking by the compiler. At run-time the
interface does not appear any more.
Using Forte 3.0.F.2
General wrote:
>
We are embarking on the analysis phase of a large pay/personnel project. =
We have been advised to use interfaces wherever possible, because they =
promote flexibility and reusability. I am fairly well convinced of the =
benefits of using interfaces - they appear to have a lot of advantages, =
and no drawbacks. However, I do wonder whether Forte's implementation of =
interfaces is stable and usable (..it was only introduced in version 3). =
If not, we may be better advised to use standard techniques.
If you have used Forte interfaces I would be interested to hear how you =
got on.
regards,
Tim Kimber--
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Eric,
You are correct, "manipulate anAIFace object" is not really the correct
way of thinking about what is happening. We are really manipulating an
instance of an object through an interface.
In regards to your other statement: "if Project C needs visibility to B,
it must have B as a supplier Plan." Forte does not force this to happen
when you are using interfaces, which is what causes the problem. Let me
expand on my initial example and add enough detail so that you can create
the problem, which surfaces as a deserialization error:
Project A (No Supplier Plans)
Defines Interfaces: UnitIFace with method GetValue() which returns an
integer
Project B (Contains A as a Supplier Plan)
Defines Class: Unit with attribute _Value as an integer and method
GetValue() which returns _Value. Implements interface UnitIFace.
Project C (Contains A as a Supplier Plan)
Defines Class: Square with method Calculate which accepts an
UnitIFace as an input parameter and returns an integer. This class needs
to be setup as a distributed object so that I service object can be
defined using this class.
Defines Service Object: SqaureSO using the Square class.
Project D (Contains B and C as Supplier Plans)
Defines a class or uses a window that creates an instance of Class B
and passes it to the SquareSO service object that sqaures the value and
returns an integer.
Once this is setup, use the running man to run everything locally. This
will run fine because the dependencies for the local partition end up
including Projects A, B, C and D. Next, run distributed and move the SO
to a remote partition. Now when you execute you will receive a
deserialization error. This happens because the dependencies for the
remote partition only included project A and C. The partition did not
have the necessary information to deserialize the underlying instance of
Class Unit that is referenced through the inteface UnitIFace.
The problem can be resolved by either adding Project B as a supplier plan
to Project C or ensuring that the interface and class are declared in the
same project as I suggested in my previous message. In either case, this
must be resolved by the programmer since Forte is not yet smart enough to
correctly resolve the project dependencies, even though all of the
information needed to establish the correct dependency hierarchy is
available.
Bradley K Wells
[email protected]
Strong Capital Management, Inc
http://www.strong-funds.com/
From: Eric Pereira
Sent: Friday, July 31, 1998 5:57 PM
To: [email protected]
Cc: [email protected]
Subject: RE: Interfaces in Forte - has anyone used them?
Bradley,
Thanks for that descriptive note on interfaces.
I do have a observation : in that example you gave us, if Project C
needs visibility to B, it must have B as a supplier Plan. Therefore, I
don't quite understand how partioning classes in C would end up with a
run-time errror in distributed mode, given that B supplies C (something
you've perhaps missed out in your example ?).
Also, is it really possible to "manipulate AIFace objects" ? Interfaces
are'nt really objects, they just help implement a compile-time type
check.
Thanks.
Eric Pereira
Forte Consultant
----<snip>------------------
Example:
Project A - Contains AIFace
Project B - Contains Class B which implements AIFace, depends on Project
A
Project C - Contains Classes manipulating AIFace objects, depends on
Project A
This can run fine locally since the local partition has knowledge of all
the classes in A, B, and C. Now as soon as you throw a service object
on
classes on Project C and push them into a remote partition, your
application starts failing because that partition does not contain the
information form project B since there is no dependency on that project.
The partition needs the information from project B though since it
contains the definitions for the actual implementation objects, however
there was no way for Forte to determine that need when it generated the
partition.
This problem is initially eliminated by keeping the interfaces in the
same project as the underlying business objects. But once you start to
have interfaces implemented by multiple classes from multiple projects,
then this won't cover all the bases either. In any case, it is an issue
that you will need to consider at some level when using interfaces.
Good luck!
Bradley K Wells
[email protected]
Strong Capital Management, Inc
http://www.strong-funds.com/
From: "Ngai, Stuart" <[email protected]>
Date: Thu, 30 Jul 1998 11:10:50 -0400
Subject: RE: Interfaces in Forte - has anyone used them?
With version 3G, you can not create an array of interfaces. I believe
Forte
will have that feature in version 4 (which is scheduled to be in
production
at the end of next year).
-----Original Message-----
From: Thomas Kunst [SMTP:[email protected]]
Sent: Thursday, July 30, 1998 8:52 AM
To: [email protected]
Cc: General
Subject: Re: Interfaces in Forte - has anyone used them?
We are making use of interfaces extensively and have never had the
slightest problem. Interfaces do not cause any overhead, since theyare
mainly a means to support type checking by the compiler. At run-timethe
interface does not appear any more.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Has anyone used Canon 5D Mark II with PrPro CS4 yet?

Hi,
Has anyone used the Canon 5D with CS4?
Do the files open ok?
Just wondering as I am going to hire the camera for a day as the footage is amazing!
Best wishes,
scott mackenzie

There are plenty of great threads on this material. As John points out, most will pop right up. Be sure to read replies by Jeff Bellune and also PaulieDC. This ARTICLE has some links to useful info on this camera.
Good luck,
Hunt

Has anyone used the Essbase XTD Spreadsheet Services?

Is the Essbase Spreadsheet Services an additional cost above and beyond the spreadsheet add-in?Has anyone used this product in addition to or in place of the existing spreadsheet add-in?What have you found are the added benefits of this product? Any lost functionality or issues with using this over the current spreadsheet add-in.If we upgrade to Essbase 6.5 is this the 'new' spreadsheet add-in or is it optional?Thanks!Lisa

To try to answer the questions in order:Q: Is the Essbase Spreadsheet Services an additional cost above and beyond the spreadsheet add-in? A: I believe ESS is licensed separately - I don't know if this has or will change in the future, so yes it does cost above and beyond Essbase.Q: Has anyone used this product in addition to or in place of the existing spreadsheet add-in? A: I used it during the beta, and I work with it from time to time, but I have not implemented it in production anywhere as of yet.Q:What have you found are the added benefits of this product? Any lost functionality or issues with using this over the current spreadsheet add-in. A: The main benefits are that you can now connect to your Essbase servers (via Essbase Enterprise Services) over HTTP, which means you don't need TCP connectivity. You could have users around the world and as long as they can see the web server running the service, they can connect.Another benefit is you don't need to install the Essbase runtime on the user's PC. The "add in" can be a CAB file that self installs when the user hits a page you set up. A nice bonus in a large widely dispersed user community.As far as functionality goes, I believe the will be parallel (the beta did not have EIS drill through). The major downer is performance - it is slower than the normal add-in with larger reports.Q: If we upgrade to Essbase 6.5 is this the 'new' spreadsheet add-in or is it optional? A: No - the normal add-in is still the default. ESS requires additional software/configurations (particulary EES, Java App Server) to be used.Regards,Jade-----------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

Has anyone used switch control and siri at the same time?

Has anyone used accessibility switch control and siri at the same time?

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

Has anyone used SFTP/ssh via any process in OWB?

Has anyone used SFTP/ssh via any process in OWB?
We need to SFTP a file from an SFTP server(unix) to our OWB environement.

You can use the FTP operator in a process flow. Configure it as such -
Command - /usr/bin/sftp
Parameter_List - ?${Remote.User}@${Remote.Host}?
Script -
lcd ${Working.RootPath}
cd ${Remote.RootPath}
get myfile
bye
You have to configure the operator to define remote and working locations.
There is another example for this in the documentation -
http://www.oracle.com/technology/products/warehouse/casestudies/10gr2/ftpprocessflow/ftp_linux_to_winxp.html
I personally prefer scp to sftp as in my experience OWB handles errors better with it.

Has anyone used Audition to create .vox files?

Similar Messages

Maybe you are looking for