Has anyone used Ethernet Gateway and LabVIEW, communicating with Ethernet/IP protocol ?

I have a PLC system (Jokab Safety B20) together with Ethernet Gateway (also Jokab Safety type E1).
What I want to do is to communicate with this unit using LabVIEW Ethernet/IP.
Read a couple of data and write a couple.
Has anyone anything like this with LabVIEW and Ethernet/IP ?
I'm completely new to using PLC's, but I have made a minimum PLC application, but can't get communication to work with LabVIEW (+ Ethernet/IP).

i generally use an OPC server to talk to he PLC and then use Datasocket to talk to the OPC server tags.
if that gaetway thing is an OPC server then you maybe abel to do data socket R/W via it.
Otherwise the NI OPC server may support that widget and (at the rate I bill out) is a good deal in the eyes of most of my customers.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Has anyone using a PowerMac and Tiger got a Phaser 8570?

Has anyone using a PowerMac and Tiger got a Phaser 8570?
There are drivers for IntelMac 10.5 and 10.6, but nothing for PowerMacs.
I was thinking of upgrading from our 8550 - if there's a driver that will do - anyone able to help?

Additional information.
Had some problems with the 8550 and decided to take up a Xerox trade-in offer.
The ColorQube 8570 not only works perfectly with Tiger, it's a lot faster and quieter than the 8550.
Which answers the question.

Has anyone used switch control and siri at the same time?

Has anyone used accessibility switch control and siri at the same time?

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

Has anyone used the new 5K retina iMac with Lightroom

Has anyone used Lightroom with the new 5K Imac. If so any problems ?

Just bought one - arrives next week. From what i can tell it's should be the fastest mac for lightroom. Processor speed is most vital. Doesn't really use all the mac pro multiple cores as I understand 4 is plenty (correct me pls?) and 16Gb ram should hopefully do it. Getting a raid thunderbolt 2 drive for image storage which will daisy chain with my eizo monitor. Choose 3tb internal fusion as I understand full SSD doesn't really help too much. 2GB graphics plenty unless you're doing video maybe?.
Only issue is I have a series of archive 3TB firewire 800 drives which are daisy chained. the questions is how will these work with an adapter but this remains to be seen....

Has anyone used BootStrap Tour or PageGuide.js with their SAPUI5?

Hello,
Has anyone used any of these guide frameworks or something similar on their web applications across multiple views?
Regards,

This is a menu that has been created using Fireworks as can be verified by the following statement

The creation date tells me that the menu was created just on a week ago.
So you are now having a problem with the newly created non-Spry menu! What better place to drop in then our trusty Spry Forum that deals with Spry related issues.
We will help you though.
http://www.greatermichiganpmc.org/ looks for a style sheet that it cannot find unlike http://www.greatermichiganpmc.org/pmc.htm where it has been found. Change the URL (in red) to reflect where the style sheet resides.
<script language="JavaScript1.2" type="text/javascript" src="mm_css_menu.js"></script>
<style type="text/css" media="screen">
@import url("./pmc.css");
</style>
I hope the above helps our mates using Fireworks.
Ben

Has anyone used Firefox Sync and Xmarks at the same time?

Firefox is my primary desktop browser. On my desktops, I use Xmarks because I use Firefox, IE and Chrome. It enables me to keep my bookmarks synced across browsers as well as use home/work profiles, etc. However, I'd like to use Firefox Sync so I can sync the bookmarks to my smartphone. Has anyone successfully tried this? I thought I'd ask before trying it myself just in case. Thanks!

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

Has anyone used the Panasonic BT-LH2600WP monitor with Premiere CC and AJA T-TAP?

I'm considering investing in the Panasonic 26" BT-LH2600WP to use as a color correct monitor with my 27" imac and a aja T-tap (thunderbolt to sdi adapter). Has anyone done this or know if there are any quality issues?
thanks
Phil

Phil, I have a similar set up, but I have the 17-inch Panasonic SDI monitor. Premier works okay with the T-Tap, with some minor yet annoying bugs.
If I monitor audio via HDMI from the T-Tap, which I prefer, then my Panasonic monitor and its matching audio are about half a second out of sync with the iMac display. (But the HDMI audio is perfectly synced with the Panasonic SDI video.) This is annoying because both the Panasonic and the iMac are directly in front of me, and it's confusing seeing the out of sync iMac image. Definitely not something to show any clients.
If I switch my audio monitoring to "Adobe Desktop Audio," which is the feed from the iMac's headphone jack, this problem disappears. In that case, the Panasonic and the iMac display are almost perfectly matched up. However, now I'm getting lower quality audio, with added digital-to-analog processing in the signal.
Using the T-Tap is smooth and trouble free in Final Cut Pro X, but in Premier it is a bit buggy. That said, it works mostly okay.
While we're on the subject, can anyone suggest the best Preferences settings in Premier to use the AJA T-Tap? I may be missing something.
Thanks!

Has anyone used webgate for apache 2.0 with apache 2.2 on linux ?

eom

Hi,
I am doing a evaluation and I have installed Apache 2.0.32 (latest beta) on Windows
2000 and am using WebLogic Server 6.1SP1. However when I tested the configuration,
I get this error saying:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.so into server:
The specified procedure could not be found.
This is how I configured the httpd.conf:
LoadModule weblogic_module modules/mod_wl_20.so
TIA for any pointers to get it to work.
Cheers
Arthur
"Eric Mountain" <[email protected]> wrote:
Apache 2.0 is not yet officially supported on Windows as Apache2 has
not
been production-released. So BEA cannot certify Apache2 with WLS of
course.
You need Apache 2.0.16 (alpha) to work with the modules delivered with
WLS
6.1 SP1 and SP2.
I got it working more or less, but it seems to be a bit flakey... i.e.
my
1st request works OK, but none after that.
I have been told that SP3 will support Apache2 on Windows "for real"
- of
course, this is assuming Apache release Apache2 on schedule I suppose.
:E
Robert Patrick wrote in message <[email protected]>...
It looks like the "Platform Support" snippet has not been updated butif
you
look below, you will see that the plug-in for Apache 2.0 only is supportedon
Windows...
Michael Halmich wrote:
It seems that the setup is supported based on this url:
http://edocs.bea.com/wls/docs61/adminguide/apache.html
... no: "The Apache HTTP Server Plug-In is supported on Linux, Solaris
and
HPUX11 platforms."
http://edocs.bea.com/wls/docs61/adminguide/apache.html#112697

Has anyone got the calendar and contact sync with MS Outlook to work?

Office Version:Office 2007Operating System:Windows 7
I've used Outlook for several years. I use the Outlook Connector to link to my hotmail account for mail and Outlook's functionality for contact and calendaring.
Recently my appointments seem to have taken on a life of their own. After entering them they look fine but at some point the appointment title is being changed to "Private Event". I can open the appointment and it looks ok. In fact, the little lock icon for making the appointment private is not enabled so I can find no visable reason for the appointment to be marked private.
I am the only user and I have administrator rights. Also, none of my much older appointments are being changed, most of them being reoccurring appointments that haven't been opened in some time.
It looks like what you might expect if you were a delegate on an Exchange calendar. But in this case my Outlook is just a local, standalone installation with no Exchange server.
I can't be absolutely certain but I think the timing of when this started was a couple of weeks ago when I attempted to set up sync between my iPod Touch and Outlook. I never opened Outlook [that I know of] during the process. I just set the sync options in iTunes to Outlook. Nothing ever got copied over to the iPod but I think that the privacy issue began about the same time.
Any idea what may be causing this?
Thanks in advance for your help.

Yes thats correct & it should showup if already checked.
When I checked the https://p15-calendars.icloud.com/holiday/FR_fr.ics
also https://p15-calendars.icloud.com/holiday/UK_uk.ics ofcourse it could be any page from
p 0- to p 20- but nothing happens from the UK one but the FR it auto downloads does not instal into
Calendar it will ask you for permision first.
I have many calendars too Europe, Asia etc:
This is what info of active Holiday Cal looks like.

Has anyone used the T410S swictchable graphics card with games?

Anyone?
There had been some reports of over heating with this unit
I was looking to purchase one
Thx

order my new MP with the 8800 card day after announced (over 4 weeks ago), still waiting.
Some say they have a shipping sate of next week. Other have rumours of the container ship with all the cards being stuck in port in Shanghai because of bad weather.

Is anyone using VMware fusion and having trouble with USB devices not being recognised

I have an Terratec Axon AX50 Guitar to Midi interface. The editor software is not Lion compatible so I have attempted to run that bit in Windows 7 on a virtual machine.
The problem is that the VM machine will not recognise the USB device, even though when it asks which machine I want to connect to it names the device correctly.
Any Ideas ?

Device not recognized by iTune
http://support.apple.com/kb/TS1591

Has anyone used the Seagate wireless plus with an iPad?

I would like to use this wireless external drive to store videos and then stream them to my iPad. Has anyone used this drive and if so how do you like it?

Hi everyone,
I am frustruated with the Seagate Wireless Plus. I think most of you just download movies in it and then watch it on your tablet. I thought this can be my external storage for everything including the content of my iPad. Not so easy!!! I can't see anything from the content of my iPad when I connect it wirelessly to Seagate. I wrote to Seagate and apparently there is another thing called WebDav in order to do it. I think Windows are winning here how easy it is to connect devices. Simply, I can see the demo stuff from the Seagate on my iPad but nothing the other way, no pictures, no music, no videos stored on my iPad can be seen from the Seagate. If there is somebody who can explain to me how to do it before I will return the Seagate to the retailer please do it in a way normal people understand. Don't say "I think" as most of people in these forums do, please say only "I know" and lead me step by step what to do. I have the latest iPad mini with iOS7, 32GB WiFi & Cellular with Retina display. I've already updated the Seagate OS to 2.2.0.005 exactly as they advise by installing the 2.1.0.014 prior to that.
Please forgive me for the tone but those 10 hours I spent so far without any results are too valuable to me.
Thanks in advance. Danny.

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Has anyone used CORBA with LabVIEW?

Has anyone used CORBA with LabVIEW?

Did you have any success with this? I'm about to attempt the same thing and would rather not write intermediate functions in other other languages to do so...

Have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,. Has anyone had this happen and if so what is the fix?

have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,. Has anyone had this happen and if so what is the fix?

Is it possible to post a sample page some place for us to try out (dropbox or acrobat.com)? Is your Acrobat updated? What version of WORD are you using?

Has anyone used Ethernet Gateway and LabVIEW, communicating with Ethernet/IP protocol ?

Similar Messages

Maybe you are looking for