Has anyone used Labview to drive a Geckodrive​, or similar step and direction servo/step​per drive? Thanks! -Kyle

I am running Labview 7 with a 1200 DAQ card.

KBClark,
It is indeed possible. You can find out more information by checking out this link: �Motion Control Software�. Perhaps someone in the community has specific experience and can be of more assistance. Good luck!
Craig H.
National Instruments

Similar Messages

  • Has anyone  used Audacity to create a Podcast on a PC and then make it available on itunes?

    Has anyone  used Audacity to create a Podcast on a PC and then make it available on itunes?  If you have used Audacity is it a good program to use? Any tips or suggestions?

    Almost certainly. You can use any program which does what you want: the end product has to be an .mp3 or .m4a file. After that it's a question of making the feed, either writing it yourself or more likely using a program or online service.
    Audacity is a useful program, and free, and you can certainly do the sort of things you need to make a podcast. I prefer Amadeus Pro, which costs $59.99 and has recently been updated with better multi-track facilities: I always fled that Audacity was awkward to use by comparison and occasionally flaky, but we're probably splitting hairs here: it would certainly be a good place to start.
    You may find my page on making a podcast helpful:
    http://rfwilmut.net/pc

  • Has anyone used the Panasonic BT-LH2600WP monitor with Premiere CC and AJA T-TAP?

    I'm considering investing in the Panasonic 26" BT-LH2600WP to use as a color correct monitor with my 27" imac and a aja T-tap (thunderbolt to sdi adapter).  Has anyone done this or know if there are any quality issues?
    thanks
    Phil

    Phil, I have a similar set up, but I have the 17-inch Panasonic SDI monitor. Premier works okay with the T-Tap, with some minor yet annoying bugs.
    If I monitor audio via HDMI from the T-Tap, which I prefer, then my Panasonic monitor and its matching audio are about half a second out of sync with the iMac display. (But the HDMI audio is perfectly synced with the Panasonic SDI video.) This is annoying because both the Panasonic and the iMac are directly in front of me, and it's confusing seeing the out of sync iMac image. Definitely not something to show any clients.
    If I switch my audio monitoring to "Adobe Desktop Audio," which is the feed from the iMac's headphone jack, this problem disappears. In that case, the Panasonic and the iMac display are almost perfectly matched up. However, now I'm getting lower quality audio, with added digital-to-analog processing in the signal.
    Using the T-Tap is smooth and trouble free in Final Cut Pro X, but in Premier it is a bit buggy. That said, it works mostly okay.
    While we're on the subject, can anyone suggest the best Preferences settings in Premier to use the AJA T-Tap? I may be missing something.
    Thanks!

  • Has anyone used LabView to control a Lumonics JK701H Laser?

    I don't want to reinvent anything and was wondering if anyone has interfaced to a Lumonics JK701H laser via LabView. I haven't been able to find any drivers or shared source for this device yet.
    Appreciate any pointers to finding information that would help LabView work with this device.

    Unfortunately, I was unable to find a driver for this instrument either. It may be possible to modify an existing driver to work with the Lumonics JK701H laser. Otherwise, http://www.ni.com/devzone/idnet/other.htm states a few options to obtaining a driver. Drivers are developed based on demand and popularity so the more requests, the greater the possibility that one will be developed. It would also be beneficial to notify the instrument manufacturer. I hope this information helps.
    A. Lynes
    Applications Engineer
    National Instruments

  • Has anyone used the invoxia NVX 620 for conference calling with iPhone

    I am looking for a speaker systems with a very good mic.    Tired the JBL Flip, not so good. Has anyone used or purchased the invoxia NVX 620 or the Audiooffice?    Looking for recommendatons. 
    Thank you!

    I just did a Google search and found several reviews on the first page.

  • Has anyone used Muse to create a static web page that gets translated into Joomla?

    Has anyone used Muse to create a static web page (html and xml) that gets translated into a Joomla template?

    Obviously I am out of my league. I am not a programer and I thought this would be something simple, but you guys are talking over my head.
    I thought I could create a simple link to the Happy.rdp and it would run...but as mentioned, you can't do that.
    What I have is a java script with a bunch of parameters (see below) that creates a pull-down menu. I was hoping I could list the names of the servers, click on the one I want to connect to, and I would get the log-in screen. That is my goal.
    I have a "Happy.rdp" icon on my desktop and I click on that and the remote connection starts. I have opened "Happy.rpd" in notepad and it has all the parameters (such as the IP address and stuff) that allow me to connect.
    * Menu selection script         *
    var NoOffFirstLineMenus=2;   // Number of first level items
    var LowBgColor='';   // Background color when mouse is not over
    var LowSubBgColor='b0b0b0';   // Background color when mouse is not over on subs
    var HighBgColor='';   // Background color when mouse is over
    ETC...
    // Menu tree
    // MenuX=new Array(Text to show, Link, background image (optional), number of sub elements, height, width);
    // For rollover images set "Text to show" to:  "rollover:Image1.jpg:Image2.jpg"
    Menu1=new Array("","http://home.com","",0,20,0);
    Menu2=new Array("Servers","","",1,20,115);
          Menu2_1=new Array("Servers","Happy.rdp","",0,20,170);

  • Has anyone used Apple TV abroad?

    I will be living in South America. Is Apple TV 2 a good platform for me to get TV shows not available on satellite TV? Has anyone used it abroad?

    I am from the UK and live in Switzerland. I discovered this great work around so that I can access the Apple TV UK store (so that I can get English language movies) without need for an address in UK. Simply buy itunes vouchers from the UK, register those in your itunes account (change to United Kingdom) and hey presto, you're in!  You then simply run down the credit as you rent or buy movies and buy more vouchers when you need them. Works great!  Guess it would also work for other countries that sell itunes vouchers??

  • Has Anyone Used the WD My Book External Drives for Time Machine?

    I'm thinking of getting the Western Digitial 1 or 2 TB My Book (Pro Edition 2 or Studio Edition) External Drives for use with 2 MacPros. Has anyone used these and could I use them with Time Machine? Would I have to reformat them for Time Machine?
    Thanks!
    Ashley

    You may, and probably want to format them, even if not TM use, I would anyway. Not everyone is happy with MyBook Pro and TM.
    I buy bare FW devices and add disk drive of choice, or just use OWC
    http://www.macsales.com/firewire and works well.
    FW800 is also better on the new Mac Pro
    http://www.barefeats.com

  • Has anyone used a 1.44 usb floppy drive with a MacBook Pro late 2011 model ? I have photos of my children i would like to recover.

    I have photos on 1.44 floppy disk and would like to copy them to DVD, has anyone used a 1.44 usb external drive with a MacBook Pro (late 2011)? The disk where made on a PC from 1990 -94 the images are in .img and .jpg. 

    Hello riflemanpro,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    Have a nice day,
    Mario

  • Has anyone used CORBA with LabVIEW?

    Has anyone used CORBA with LabVIEW?

    Did you have any success with this?  I'm about to attempt the same thing and would rather not write intermediate functions in other other languages to do so...

  • Has anyone used the QuickUSB module (Bitswise Systems) to interface to a USB Camera via IMAQ for USB?

    Has anyone used the QuickUSB module made by Bitwise Systems with LabVIEW for image acquisition.   I have a USB camera and I'm trying to use the IMAQ for USB controls to no avail.   Any input is appreciated. 

    Are you using the NI-IMAQ for USB functions or are you calling the QuickUSB libraries from LabVIEW?  Unless the USB camera is DirectShow compliant, then it will not work with the NI-IMAQ for USB driver.  You can use the Code Interface Node in LabVIEW to call external dll's, and it looks like from QuickUSB's website that is the best way to go.  Hope this helps.
    Jason N 

  • Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband.  How do I set it up?

    Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
    Thanks, Doctor Mark

    Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
    It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
    Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
    In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
    But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

  • TA26012 Has anyone used keyring 808 spy camera with an itouch and rendered with good results in final cut pro ?

    I am using spy camera 808 which has the same 1280 by 720 H264 AAC as an itouch for filming.
    Problems occour in fincal cut pro 6.06 on export if i export 808 on its own no issue the issue is the itouch messes up the time liine on sound video, example 20 min video 10 mins 808 and 10 mins itouch equals 12 mins.
    So has anyone actualy with the power pc g5 and final cut pro 6.06 had a method where it is succseful for a simple export to quicktime ?
    Just tried it with itouch in final cut and fcpro says does not match settings so i let fcpro choose audio needed render that was it export of 5 mins came out as 30 seconds.
    So question stands has anyone found a suitable way to bring in itouch video and export in final cut with out issues.?
    ps i brought the video in with "image capture" and iphoto no change.
    email here if you would [email protected]

    My plan is as follows:
    -Make a full backup copy of System Drive on an external drive
    -Boot from OS Install Disc > use Disk Utility to Erase/Write Zeros to drive
    -Install Snow Leopard
    -Install FCP, etc.
    -Delete "Capture" directory from external "Scratch Disk"
    -Transfer all remaining files to another external drive
    -Reformat "Scratch Disk
    -Cross fingers
    -Begin transcoding process again---frequently checking files for errors
    I'll let you know how it goes. Still open to other thoughts and suggestions...
    -Ryan

  • Has anyone used Migration Assistant to move services from one system running Server to a new system?

    So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server.  In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers.  The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases.  There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
    Has anyone used Migration Assistant to move services from one system running Server to a new system?  Are there any details that are particularly important to get right?  Are there things that require manual steps after Migration Assistant is done?
    There are other ways I could tackle the problem, of course.  I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them.  That would complicate such an approach.  I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.

    yes. I migrated a server frm lion to mavericks following these notes a while back:
    OS X Server: Upgrade and migration from Mountain Lion
    i do not recall having any problems with it.

  • Has anyone used the new 5K retina iMac with Lightroom

    Has anyone  used Lightroom with the new 5K Imac. If so any problems ?

    Just bought one - arrives next week. From what i can tell it's should be the fastest mac for lightroom. Processor speed is most vital. Doesn't really use all the mac pro multiple cores as I understand 4 is plenty (correct me pls?) and 16Gb ram should hopefully do it. Getting a raid thunderbolt 2 drive for image storage which will daisy chain with my eizo monitor. Choose 3tb internal fusion as I understand full SSD doesn't really help too much. 2GB graphics plenty unless you're doing video maybe?.
    Only issue is I have a series of archive 3TB firewire 800 drives which are daisy chained. the questions is how will these work with an adapter but this remains to be seen....

Maybe you are looking for

  • "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."

    please... help. i can't to sync my tones to my ip5s. i don't know why.... "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." "Please tell Microsoft about this problem." And bla bla bla... Already send error rep

  • 4-4-5-Error-Financial year variant periods K5 are not in increasing order

    Hi, As per the client requirement I have to configure the Posting Periods in the Calender Year Month     Posting Period     Days in the period          From     To January     1     31     1                                  1-Jan-09     31-Jan-09 Feb

  • How do I get a password on my wireless router?

    I think I found a person on in My Finder sharing my network. I'm not too happy. When we set up our router it didn't ask for a password, so we don't have one. I'm not too computer savvy, but can do the basics. Help..not sure what I can do ? I'd  like

  • Upgrade to mySAP ERP 2005 with Unicode

    Dear Experts, We are currentl looking at upgrading our 4.5B system to mySAP ERP2005 and have the following issues. 1.Our DB size is currently 2.4 TB and with Unicode we expect more....what should be the best strategy to control the DB size apart from

  • How to install After Effects CS5.5(64-bit) with After Effects CS4 installer(32bit)?

    I have purchased After Effects CS5.5 unknowingly it is only for 64 bit system.My system is 32 bit.When I read a Adobe help page I got to knew that 32 bit users can install AE CS5 and above with help of a AE CS4 installer.Please help me how to do this