Has anyone used Migration Assistant to move services from one system running Server to a new system?

So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server.  In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers.  The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases.  There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
Has anyone used Migration Assistant to move services from one system running Server to a new system?  Are there any details that are particularly important to get right?  Are there things that require manual steps after Migration Assistant is done?
There are other ways I could tackle the problem, of course.  I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them.  That would complicate such an approach.  I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.

yes. I migrated a server frm lion to mavericks following these notes a while back:
OS X Server: Upgrade and migration from Mountain Lion
i do not recall having any problems with it.

Similar Messages

  • Using Migration Assistant to move files from old PC laptop to new MacBook Pro that has Windows 8 installed containing Outlook

    When using Migration Assistant to move files from old PC laptop to new MacBook Pro, that has Windows 8 installed containing Outlook, will emails, contacts and calendar entries be moved to Outlook on the new MacBook or into Mail, Contacts and Calendar?

    I doubt they will. But then I'm not sure as I used a migration program once about 18 years ago and totally FUBARed the system I had at that time and I've never used one again.
    For me the reason to have a new system is to start fresh. Installing only program that I now use and manually copying data over from the older system.
    Not sure your older version of Outlook, and the outlook mail boxes, are compatible with Office/Outlook for Mac 2011.
    A better place to ask this question would be on the MS Office for Mac forums.
    Hope it all works out for you.

  • HT4413 I am trying to use migration assistant to move everything from snow leopard (10.6.8) to mountain lion (10.8.3) using a direct machine to machine ethernet cable connection but it stalls out at about 17 minutes remaining.  Thoughts on how to proceed?

    I am trying to use migration assistant to move everything from snow leopard (10.6.8) to mountain lion (10.8.3) using a direct machine to machine ethernet cable connection but it stalls out at about 17 minutes remaining.  Thoughts on how to proceed?

    Have you set both to never sleep?
    Is the source (old) Mac's software up to date (including the Migration Assistant for Mac OS X Snow Leopard update)?
    Is the old Mac healthy?  Have you run Verify Disk on it lately?
    The estimates are wildly inaccurate under the best of circumstances.  How long has it been stuck? 

  • I use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

    i use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

    Welcome to Apple Support Communities
    That's the classic behaviour after using Migration Assistant and that's normal.
    To transfer the data from the new user account to your old user account, you can follow some steps. Here is all the information you need to do this > https://discussions.apple.com/docs/DOC-5472

  • Secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

    secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

    Hold down Option key while clicking on menu bar and Save as will appear.

  • I'm using migration assistant to transfer files from my wife old net book to new mac air and the pc dropped out during transfer.  Pc now says waiting for mac to connect and has is stuck at transferring information.  How do I get the process to continue?

    I'm using migration assistant to transfer files from my wife old net book to new mac air and the pc dropped out during transfer. I started up migration assistant on the Pc again and now says waiting for mac to connect! New MacBook Air  is stuck at transferring information.  How do I get the process to reconnect and continue?

    Whew, good luck!
    What version of OSX is on the older one?

  • Why can't I seem to use migration assistant to move applications from time capsule to iMac?

    I just want to use Migration Assistant to move select applications to my new iMac.  I can't seem to find a way to select only a limited number of applications to transfer.  I want to move applications such as a Canon Utilities and Image browser applications that came with my Canon camera that I bought.  I loaded the original software on to my Macbook Pro with the discs.  I can't do that with my iMac (obviously) so I'm hoping to get my canon software onto my iMac through migration assistant.  Please help!

    It is not as fine grained as that.. you select all or nothing.. At least from my experience using it.
    It works if you remember that all the applications will be imported to a particular user profile.. simple create a new user.. log in with that and accept what you have to to get the applications you want.. although I would suggest most things are available for download nowadays.
    You can also keep using your old MBP if it is still working and simply copy the files on the CD to the new computer via the disk in the MBP.

  • Can I use Migration Assistant to Copy files from one mac to another, but not delete the original files off of the original Mac?

    I just purchased a new Macbook Pro Retina, and I have an old Macbook Pro w/o Retina and wish to use migration assistant. I still want to use the older Macbook Pro and keep all the files on it, but copy them and also put them on my new Macbook. What I'm trying to say is, can I use migration assistant to move files to a new Mac, while keeping the files on the old computer?

    You can omit some broad categories, but you can't pick and choose individual items.
    See Using Setup Assistant on Mountain Lion or Lion (preferred method), or the similar Using Migration Assistant on Mountain Lion or Lion for the gory details.

  • Using Migration assistant to transfer data from one disk to another

    I will install a new SSD disk but I would like to make a clean install with Mountain Lion but after that migrate data from the old HDD, that it is now installed in the place of the optical drive, to the new. I would like to know how to do that correctly and also if there is any advice to do this better.

    I agree the best solution is to install clean then install programs then copy data over for a true new clean install.
    But I still don't understand why you said setup assistant isn't a option either. It certainly is a option and in my opinion a much better option than migration assistant. Which is what the original poster was asking about.
    As for cloning I have read it is best when going from standard drive to ssd it is best to do a new clean install instead of cloning. So I wouldn't consider cloning a option in this case. But that is my opinion from the reading I have done. I was thinking about installing a ssd in my mac notebook.
    Thanks.
    OGELTHORPE wrote:
    The simplest or most efficient way is to clone the new SSD.  If the OP chooses to be selective about which data to retain, drag and drop is the simplest and most efficient.
    Ciao.

  • HT1554 can i use migration assistant to copy applications from one mac to another???

    hey, i have an iMac G5 (ALS) and an a G4 iMac from 2002, the G5 is running OS X 10.5.8 and the G4 is running OS X 10.4.11. I want to copy apps from the G4 to the G5 without loosing them in the G4, is that possible???

    What applications? Why can't you just reinstall them? Copying a file does not delete the file in the process, so the answer to your specific question is, yes it is possible.

  • I used the Migration Assistant to move data from my Time Machine to my new Mac.   Most data has been moved successfully but none of my iPhoto pictures have been moved.   Looking at my Time Machine now I find that the earliest back-up is dated after the Mi

    I used the Migration Assistant to move data from my Time Machine to my new Mac.   Most data seems to have been transferred successfully but none of my iPhoto pictures have been transferred.
    My Time Machine now shows the earliest available Back-up to be after the Migration Date.   My iPhoto pictures seem to have either been lost in the migration process or are locked in my Time Machine prior to the earliest back-up date now accessible.  
    Any advice on recovering my old iPhoto pictures would be greatly appreciated.

    First go to iPhoto Preferences, look in both General and Advanced tabs to make sure that things are set to import from camera into iPhoto.
    Then if that doesn't help, connect the camera and open Image Capture in your Applications > Utilities folder and see if you can use Image Capture to reset the import path from the camera to iPhoto.
    Image Capture: Free import tool on Mac OS X - Macgasm
    Message was edited by: den.thed
    Sorry John, I didn't see your post when I clicked the reply button. Dennis

  • I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?

    I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?

    m1doc,
    Are you migrating from a Mac or a MS Window machine? Either way you probably should be in touch with AppleCare, you have 90 days of free AppleCare telephone support. They can usually help on issues like this. If you don't know the phone number please use http://support.apple.com/kb/HE57 to help find the number in your country.

  • Using Migration Assistant to Move Data Files from one Account to New User

    Is it possible or recommended to use Migration Assistant to move data files from an old user account to a new user account on the same volume/hard disk?

    Migration Assitant cannot be used as a simple file transfer utility. MA can transfer an entire Home folder or entire Users folder but not individual files.
    In general files in one user account cannot be moved to another user account as this would violate built-in security measures.
    What you can do is to copy the files to an external device like a hard drive or flash drive. First log in to the old account. Then configure the drive to ignore preferences by Pressing COMMAND-I to open the Get Info window and check the Ignore permissions on this volume checkbox at the bottom of the window. Copy your files to the device. Log into the new account. Verify the external drive is still configured to ignore permissions (reset it, if not.) Copy the files from the external device into the Home folder of the new account. I would create a temporary folder for these files. If you still end up without the proper permissions you will need to make modifications that are easier done if all the files are in a single folder.

  • Used migration assistant to move office 2008 and now i cannot open it

    I had an old MacBook from 2008, and now have a new MacBook Air. Was told to use migration assistant to move my applications. I did this and now when I go to open any programme from Microsoft Office 2008, it takes me to Microsoft Office Setup Assistant, over and over and over... Its saying that I don't need to register...
    Any advice or help?

    I migrated Office 2011 and other than forcing me to enter the license code again (all 2 million letters of it) everything went OK.
    Note that when I tried to open Parallels desktop 6 it wouldn't open and said that it wasn't compatible with Mountain Lion and the icon had a sort of greyed out look. I upgraded to 8 and it started working. I wonder if there is any issue with Office 2008 and Mountain Lion? Probably not but it's a possibility.
    You can buy an external superdrive too from Apple. I bought one for my 2010 Air. But CD sharing from another computer should work. I bring it with me when I travel to watch DVDs.

  • I used migration assistant to move all my programs to my new Macbook Pro - Now CC won't run

    I used migration assistant to move all my programs to my new Macbook Pro - The programs would run but I had to enter my license key each time - I tried downloading and reinstalling CC but always get message to contact support.  Any thoughts on next step?

    Adobe programs need to be installed, migration/transfer does not usually work.  Try using the Cleaner tool uninstall whatever you currently have on the machine and then reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Maybe you are looking for