Has anyone used ReelDirector with their iPhone 4 yet?

I'm trying to decide between iMovie or ReelDirector, and there's a piece of info on ReelDirector's page that's running contradictory to the reviews.
Specifically, they say that they're fully compatible with the iPhone 4 and its HD video, yet a bunch of the reviewers say that it's not, and one even specifically says that ReelDirector can only output at 480p. Is it that ReelDirector can read & edit the HD video, making it "fully compatible" as they say, but then downgrades for export?

Have you tried a hard reset? Or reboot? Hold the top power button and the home button at the same time until the Apple logo appears. Then release. Also, when you hear yourself, is it when you're taking to a particular person? I sometimes hear myself when talking to my wife. We discovered it was how she holds her phone too high up on her ear. When she lowers the phone, I no longer hear myself.

Similar Messages

Has anyone had issues with their iphone not being able to play music through ihome or other external units after ios7 update?

I have not been able to play music or podcasts when my phone is plugged into my iHome. It did so before the iOS update. It does the same thing with my JBL at work.

Yes with some docks and car systems but I do not remember the specific devices. Sometimes and iOS update breaks compatibility.
Try:
- Go to the dock manufacturers and see what they say. Also see if there is a firmware available for the dock
- Reset the dock
- Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Has anyone used JAAS with WebLogic?

Has anyone used JAAS with Weblogic? I was looking at their example, and I have a bunch of questions about it. Here goes:
Basically the problem is this: the plug-in LoginModule model of JAAS used in WebLogic (with EJB Servers) seems to allow clients to falsely authenticate.
Let me give you a little background on what brought me to this. You can find the WebLogic JAAS example (to which I refer below) in the pdf: http://e-docs.bea.com/wls/docs61/pdf/security.pdf . (I believe you want pages 64-74) WebLogic, I believe goes about this all wrong. They allow the client to use their own LoginModules, as well as CallBackHandlers. This is dangerous, as it allows them to get a reference (in the module) to the LoginContext's Subject and authenticate themselves (i.e. associate a Principal with the subject). As we know from JAAS, the way AccessController checks permissions is by looking at the Principal in the Subject and seeing if that Principal is granted the permission in the "policy" file (or by checking with the Policy class). What it does NOT do, is see if that Subject
has the right to hold that Principal. Rather, it assumes the Subject is authenticated.
So a user who is allowed to use their own Module (as WebLogic's example shows) could do something like:
//THEIR LOGIN MODULE (SOME CODE CUT-OUT FOR BREVITY)
public class BasicModule implements LoginModule
private NameCallback strName;
private PasswordCallback strPass;
private CallbackHandler myCB;
private Subject subj;
         //INITIALIZE THIS MODULE
           public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
                  try
                       //SET SUBJECT
                         subj = subject; //NOTE: THIS GIVES YOU REFERENCE
TO LOGIN CONTEXT'S SUBJECT
                                                 // AND ALLOWS YOU TO PASS
IT BACK TO THE LOGIN CONTEXT
                       //SET CALLBACKHANDLERS
                         strName = new NameCallback("Your Name: ");
                         strPass = new PasswordCallback("Password:", false);
                         Callback[] cb = { strName, strPass };
                       //HANDLE THE CALLBACKS
                         callbackHandler.handle(cb);
                  } catch (Exception e) { System.out.println(e); }
     //LOG THE USER IN
       public boolean login() throws LoginException
          //TEST TO SEE IF SUBJECT HOLDS ANYTHING YET
          System.out.println( "PRIOR TO AUTHENTICATION, SUBJECT HOLDS: " +
subj.getPrincipals().size() + " Principals");
          //SUBJECT AUTHENTICATED - BECAUSE SUBJECT NOW HOLDS THE PRINCIPAL
           MyPrincipal m = new MyPrincipal("Admin");
           subj.getPrincipals().add(m);
           return true;
         public boolean commit() throws LoginException
               return true;
    }(Sorry for all that code)
I tested the above code, and it fully associates the Subject (and its principal) with the LoginContext. So my question is, where in the process (and code) can we put the LoginContext and Modules so that a client cannot
do this? With the above example, there is no Security. (a call to: myLoginContext.getSubject().doAs(...) will work)
I think the key here is to understand JAAS's plug-in security model to mean:
(Below are my words)
The point of JAAS is to allow an application to use different ways of authenticating without changing the application's code, but NOT to allow the user to authenticate however they want.
In WebLogic's example, they unfortunately seem to have used the latter understanding, i.e. "allow the user to authenticate however they want."
That, as I think I've shown, is not security. So how do we solve this? We need to put JAAS on the server side (with no direct JAAS client-side), and that includes the LoginModules as well as LoginContext. So for an EJB Server this means that the same internal permission
checking code can be used regardless of whether a client connects through
RMI/RMI-IIOP/JEREMIE (etc). It does NOT mean that the client gets to choose
how they authenticate (except by choosing YOUR set ways).
Before we even deal with a serialized subject, we need to see how JAAS can
even be used on the back-end of an RMI (RMI-IIOP/JEREMIE) application.
I think what needs to be done, is the client needs to have the stubs for our
LoginModule, LoginContext, CallBackHandler, CallBacks. Then they can put
their info into those, and everything is handled server-side. So they may
not even need to send a Subject across anyways (but they may want to as
well).
Please let me know if anyone sees this problem too, or if I am just completely
off track with this one. I think figuring out how to do JAAS as though
everything were local, and then putting RMI (or whatever) on top is the
first thing to tackle.

Send this to:
newsgroups.bea.com / security-group.

Has anyone had trouble with their bluetooth headset? (even after pairing)

Has anyone had trouble with their bluetooth headset? I have a Motorola H700 that pairs with the iphone but takes about 10 seconds after i hit send for the connection between the phone and the headset to be established. I also get allot of static when the headset is more than 3 feet away from the phone. (this headset worked perfectly @ about 40' with a Motorola Razr I had)

Hi jmsemac,
I understand you are experiencing some issues with Bluetooth connections. I have linked to an article which provides some troubleshooting steps you may want to explore:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

HT1349 Has anyone had issues with the iphone 4s and facebook.

Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

@razmee: rather unhelpful.
@tata - we're having the same trouble, and the only solution we've found doesn't fix it.
1) uninstall
2) login on PC/MAC and change password
3) reboot iphone
4) install facebook app, reboot again
5) login from iphone.
No joy.
Safari works, but not for the apps.
Of course, it's Facebook that has to fix this.

Has anyone had issues with their itunes not coming up?

Has anyone had issues with their itunes not coming up? I keep getting error message 13014. I just bought a new classic ipod and am not sure if this is the problem.

Hi
Your new iPod has certain operating system requirements. Does your iMac meet those requirements?
http://www.apple.com/ipodclassic/specs.html
3rd Column on the right hand side, about a 3rd of the way down. To find out which version of iTunes you have, launch it and select "About iTunes" from the iTunes menu.
HTH?
Tony

Has anyone used FCE with a Sony hd-fx7 camcorder

As above, has anyone used FCE with a Sony hd-fx7 camcorder. I have recently got one of these at work and am currently using imovie for basic edits, but would like to step up to FCE, has anyone any experience using the two.
THanks

Hi, have MacBookPro 2,16 GHz and Sony HDR-FX7 and FCE 3.5 (German PAL)
- works good and fast
- But better don't try to use an external monitor on DVI connection
my system slows down if srubbing time line
- couldn't find out yet why

HT201272 Has anyone had problems with their apps downloading to their ipods?

Has anyone had problems with their apps downloading to their ipod? Or know why all apps have been removed from their ipod?

Possibly, but what problems? Any errors?
If you are really running iOS 3.1.2 as your signature suggests, that is likely the issue. Many apps now require iOS 4.3 or higher.

Has anyone used CORBA with LabVIEW?

Has anyone used CORBA with LabVIEW?

Did you have any success with this? I'm about to attempt the same thing and would rather not write intermediate functions in other other languages to do so...

HT201401 Has anyone had issues with the iPhone 5'S power cord going bad? I have purchased 2 in a 4 month span and they keep going out.

Has anyone had an issue with the power cord for the iPhone 5? I have replaced two in a four month period

Did you check with Verizon to make sure that your destination country would allow the device you have to connect? The possibility is that this country does not have (or you are not in range) a carrier that uses CDMA. If the carriers in this country use GSM you may be out of luck. VZW cannot guarantee service in any country outside the USA.
Here is the number to call 908-559-4899

Has anyone had trouble with their computer recognizing your I phone after installing new hard drive and reloading I tunes?

Has anyone had a problem with their computer recognizing their I phone ? I had to replace my hard drive And reloaded iTunes but know it doesn't recognize my phone but it will download pictures from it?

I had my HD replaced under the recall program. I am running 10.6.8 and Safari 5.1.7 on a 2.8GHz iMac.
I haven't noticed any significantly different behavior of Safari since having my HD replaced and using Time Machine to restore my data. The only thing I've run across in about 2 weeks is that Safari's Preferences panel takes a bit longer to load than I remember.
One thing you can try is launching Safari from your computer's main Applications folder. If it still crashes, you can also try downloadng a fresh copy here: http://www.apple.com/support/safari/
Have you ever checked out Firefox? I personally like it better than Safari because it offers more security options, such as greater control over cookies, and supports many useful privacy and security plugins.

Has anyone used Aperture with Bitcasa?

I've got a rather large libary in iPhoto, on an external disk. I'd like to move it somewhere offsite.. like Bitcasa or something equivalent, and move to Aperture to manage it.
Has anyone done this? Results?
Thanks.

I know this is a couple of months old, however I figured that I'd throw my 2 cents in here.
I don't store my Aperture library on Bitcasa for the very reasons stated here, however, I do manage it a bit by using externally referenced files.
My primary back up is Time Machine, and my secondary backup is Bitcasa, where I sync/back up Documents, Music, Photos, etc.
To keep the Aperture library to a manageable size, I use reference files. When I import Raw image files, they're stored in the Aperture Library. That gets backed up to Time Machine and Bitcasa during regular backups. Each Quarter, I move the photo files to an external hard drive. The metadata is still in the library, and I'm able to do searches, etc. Once that's done, I burn the referenced images to DVD. If the external drive goes bad, I've got the DVDs to at least do restores.
My hope is to experiment with Bitcasa to see if I can migrate that external drive, then have Aperture look there for the referenced files.

Has anyone used GitHub with RH projects?

Does anyone have any experience using GitHub with RoboHelp? I don't plan on setting it up to use the RoboHelp UI to check individual topics in and out. I just want to check out the entire project. If anyone has any experience with this, any tips would be greatly appreciated.
Also, can anyone please tell me which files to exclude when checking in the project? I know you're supposed to exclude the .cpd file, but I think I read that there are others. Unfortunately, I can't find the thread where this was discussed.
Thanks.

As long as you check out/check in the entire project folder, you should
be fine. For RoboHelp, it's then as if there was no source control.
Exclude the CPD. Just include all the other files. (Don't forget to add
new files to the source control when you create them.)
Kind regards,
Willam

Has anyone had issues with their Gyroscope or Accelerometers randomly breaking?

I had my phone in my purse for a few hours at work and when i took it out again they were no longer working. I didn't do anything (use, touch, drop, etc.) to the phone in that time period and now my phone gets extremely hot when I'm using it or when I'm charging it and the gyroscope/accelerometer no longer work. If i try to use the compass app it just goes on the fritz and the iPhone's parallax effect makes everything shake and swirl around like crazy.
I have a small scratch/chip in the corner of my phone and the Verizon store representative said he wasn't sure if it would be considered damaged or not. The iPhone is outside of the 1 year warranty. I'm not sure what to do but i can barely use the phone now

I understand your predicament radica1! Applications some times fail when system files get corrupted. I have resolved similar issues with my iPhone by doing a hard reset, as this procedure brings the phone back to original factory settings and clears any potential system error. Give it a try http://bit.ly/TDltcJ
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

Is anyone having issues with their iPhone 5 music controls in a 2012 Hyundai Accent, both on Bluetooth and using a headphone or USB cable? My music plays but I cannot skip songs without physically using the iPhone 5 controls. Thanks!

Hello,
I have an AT&T iPhone 5 purchased from an AT&T store - it is a normal phone, no changes, no jailbreaking. I tried using my phone and my girlfriend’s iPhone 5 with the USB auxiliary cable in my 2012 Hyundai Accent. No matter what connector I use (headphone, USB, auxiliary) it doesn't charge or allow me to use the Hyundai’s controls to change music. Music will play through the Bluetooth system, but I cannot control the music unless I physically touch my iPhone. My iPhone 4 has a USB auxiliary cable and works perfectly; it charges and I have full control of my music without having to touch my phone. Nothing works even if I use the adapter that connects the iPhone 4 charger end to the iPhone 5. The picture below shows the iPhone 4 USB cable but it needs to have the (blue) iPhone 5 adapter.
Here’s the best part of this whole situation. I was told by Hyundai Customer Care that there is a specific USB cable available for my iPhone and that I need to contact a dealer. However, two Hyundai dealerships have told me that they do not have a cable, that Apple has not made a cable for the iPhone 5, and that I need to contact Apple directly or order it from an Apple store. It gets better. I contacted an Apple Store and they told me to contact Hyundai. I explained what I wrote above and they put on a call with Apple Customer Care. After 37 minutes on the phone with Apple, they still couldn't give me a satisfactory answer on how to get this cable or if they even had a cable (Case ID 505467409).
So here is the magical question: Is there a working adapter for the iPhone 5 that connect to a 2012 Hyundai Accent? It needs to play music, charge the phone, and work with the car’s controls. Thanks!
-sam

The problem is that you're using an uncertified lightning to 30-pin connector (the blue cable). If you purchase the 30-pin to lightning cable (either online, at an Apple store or an authorized dealer) it should work fine.
I have a 2011 Tuscon and tried the lightning to USB cable that came with the phone - no dice. Talked to my local Hyundai dealer and they don't have an eta on the Hyundai lightning cables (I'm sure it's in the works).
Lightning to 30-Pin Adapter (0.2M)
Part Number: MD824ZM/A
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=48
$29 in the US store, $45 in Canada (yes, even though our dollar has been par for years)

Has anyone used ReelDirector with their iPhone 4 yet?

Similar Messages

Maybe you are looking for