Has anyone used ROXIO TOAST II for burning DVD

Has anyone used ROXIO TOAST II for setting up intro and burning to DVD. I used to do this in IDVD which has been abandoned in the Maverick

Just to say that that I've tested iDVD on 10.9 and it works for me. It's a discontinued program of course, and hasn't been supported for several years, but I don't think it runs any differently on 10.9 than it did on say, 10.6.
However…can't help you with Toast because I don't use it.
Russ

Similar Messages

  • Has anyone used the appscript modual for python rather than streight AS?

    I just discovered appscript and so far I like what I see. has anyone used it?
    Does it just wrap around actual applescript commands which it then sends to osascript with a system call or does it use the message system directly? Is there anything that it has not yet implemented that might cause problems?
    To me it seems to be a perfect solution to the clutter that AS seems to be... at least from someone coming from more traditional languages.

    In startMovie, you need to register the xtra
    on startMovie
    axRegister(serial code here)
    end
    Then, on your Record Button, something like this:
    on mouseUp me
    --start recording session - using 400k as maximum here
    errOpen=axOpenRecorder(400000)
    --see if there is an error
    put errOpen
    --save the new audio as a file
    errRecord=axRecordSoundToFile("soundName","c:\path\to\soundfile.wav")
    --see if there is an error
    put errRecord
    end
    then make sure you close the recorder in stopMovie
    on stopMovie
    axCloseRecorder()
    end
    You can also make a Stop Recording button that has code like
    this:
    on mouseUp me
    errStop=axStopRecording()
    put errStop
    end

  • Has anyone used a Pinnacle TV for Mac HD Stick

    Hi,
    I was looking into this product and was thinking about getting it for my powerbook G4 1.67 Ghz. I know it came out about 2008 and is now discontinued but all new TV viewer programs require an Intel mac. With this one you can use a G4/G5 and Intel.
    Mark

    If not the Pinnacle TV for Mac HD Stick how about anyone using the Elgato Systems EyeTV Hybrid? It has the same system requirements for viewing HDTV as does the Pinnacle unit. Anyone get HDTV with one of those on a MDD G4?
    Carl B.

  • Has anyone used a Quardro 4000 for 10-bit output to a monitor

    Hey Gang,
    I'm trying to set something up that uses a quadro 4000 for outputting my source and program monitors while I'm using them to an external monitor.  I have a Flanders LM-2461W.  I also have a black magic Decklink Extreme 3d, but I'm not at all happy with it's peformance with r3d files.  I mostly work with red footage, and I can't view any of my material on my external monitors.  I need to output like a 1080 signal from my 4k files.  My old Kona card did this beautifully, but for some reason, this black magic card seems to fall short.  I really want to keep the black magic for use with Resolve though.  I need to monitor resolve on my flanders.  I've heard of people using the display port on a Quadro 4000 to output out of premiere, and I'm curious if anyone has done with with r3d footage. 

    brett austin wrote:
    I've got a new Mac Mini running HDMI to a 40" Sony Bravia Flat Panel... works fine.
    I do have an issue when I turn on the TV and wake the Mini from sleep... the screen stays really dim. Not sure if it's the Mini or the TV that's the issue. After the Mini is fully on... a power cycle of the TV seems to bring everything back to normal.
    Brett, I have the same problem when I bring the mac out of sleep mode. Have you managed to find out why we have to switch the TV Off then On again to get the picture? Or another solution? Very annoying when you have 1000's $ worth of equipment but the solution is still "Have you tried switching it Off and On again" (All due respects to the "IT CROWD").

  • Has Anyone Used the Pinnacle TV for Macbook Tuner?

    I saw this product at the store yesterday and I'm wondering how well it works for recording TV programs and possibly movies onto my macbook. I am hoping it performs similar to a DVR, and I am also wondering if it would be possible to burn these programs onto DVDS? Any advice would be greatly appreciated.

    i recently got it... it works great! only problem is it comes with eyetv lite, so you have to pay extra to upgrade to the full version of eyetv that allows exporting to diff ipod and apple tv formats.
    The nice thing about the pinnacle compared to the elgato eyetv hybrid is that pinnacle tv for mac hd comes with a remote and a portable antenna. The pinnacle is also black so it matches my black macbook.
    So yes it records well, but is limited by the "lite" software. Only issue is that u can only record at whatever resolution its coming in at. tv shows can get as big as 4gb for 1hr. you can burn it to dvds also but i think you need toast titanium.

  • Has anyone used the new Quicken for Lion?

    Before updating to Lion and purchasing the new Quicken which is compatible with Lion, I wanted to see if others have used it yet and if there are any major problems.

    I have not experienced any problems with the new Quicken for Lion.  It's quite different from the old version but it seems to work quite well.  After installing Lion, the old version of Quicken was deemed useless.  It will not run on Lion, so access it before you update if you intend to extract any info from it.  Good luck!

  • Has anyone used savos anti virus for mac

    I have been seeing a bit on the net that Apple Macs are being targeted by hackers.
    I have seen the program Savos, anti virus & free root kit remover.

    Most would say no, that macs do not need anti virus programs.  They are subject to malware, however the user has to be tricked into intalling it.  Unless you have a Windows partition, I personally wouldn't recommend wasting your money on an anti virus program.  You can read this: http://www.reedcorner.net/guides/macvirus/#needav to help you with your decision.

  • Has anyone used an app with the Maverick software to burn iPhoto slideshows to DVD disks that will play on any DVD player?

    Has anyone used an app with the new Maverick software to burn iphoto slide shows to DVDs that will play on a standard DVD player?  This probably cannot be a demo app in that the amout of photos on the slideshows is large.  
    Thank you,
    Jim

    Export the slideshow from iPhoto, that makes a movie of it.
    Do you want to use this DVD in a domestic DVD player? If so, then the disk will have to be 'authored' to make it the correct form for that. If you have iDVD then that's the app you use. However, iDVD is no longer developed or distributed by Apple. You may be able to get it on an old iLIfe install disk.
    Other options:
    Burn: http://macupdate.com/app/mac/21992/burn
    Toast: http://macupdate.com/app/mac/6351/toast-titanium
    But there are lots of others too. Search on the App Store or MacUpdate

  • DVD Cloner for Mac v4- has anyone used this software?

    I'm wanting to get a good DVD burner software, however there are so many out there. Has anyone used DVD Cloner for Macv4?

    Thanks Kappy, I let it do the scan and when it stopped halfway through and demanded registration I stopped and deleted it.  I still have the icon in the menu bar at the top of the screen and don't know how to remove it.  If this is not possible I can live with it.  I am new to Mac and have trouble divorcing myself from my old PC habits!

  • Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband.  How do I set it up?

    Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
    Thanks, Doctor Mark

    Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
    It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
    Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
    In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
    But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

  • Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    John -
    My "Use" menu only contains Apple print drivers.  And Canon drivers, from the location I set this machine up.  None for my home use....which is a Xerox machine.
    Not being on the menu, I don't know how to acquire this generic driver. 
    Any further helpful hints?
    I appreciate your thoughts and help.
    Lisa

  • Has anyone used the QuickUSB module (Bitswise Systems) to interface to a USB Camera via IMAQ for USB?

    Has anyone used the QuickUSB module made by Bitwise Systems with LabVIEW for image acquisition.   I have a USB camera and I'm trying to use the IMAQ for USB controls to no avail.   Any input is appreciated. 

    Are you using the NI-IMAQ for USB functions or are you calling the QuickUSB libraries from LabVIEW?  Unless the USB camera is DirectShow compliant, then it will not work with the NI-IMAQ for USB driver.  You can use the Code Interface Node in LabVIEW to call external dll's, and it looks like from QuickUSB's website that is the best way to go.  Hope this helps.
    Jason N 

  • Has Anyone Used the WD My Book External Drives for Time Machine?

    I'm thinking of getting the Western Digitial 1 or 2 TB My Book (Pro Edition 2 or Studio Edition) External Drives for use with 2 MacPros. Has anyone used these and could I use them with Time Machine? Would I have to reformat them for Time Machine?
    Thanks!
    Ashley

    You may, and probably want to format them, even if not TM use, I would anyway. Not everyone is happy with MyBook Pro and TM.
    I buy bare FW devices and add disk drive of choice, or just use OWC
    http://www.macsales.com/firewire and works well.
    FW800 is also better on the new Mac Pro
    http://www.barefeats.com

  • Has anyone used the invoxia NVX 620 for conference calling with iPhone

    I am looking for a speaker systems with a very good mic.    Tired the JBL Flip, not so good. Has anyone used or purchased the invoxia NVX 620 or the Audiooffice?    Looking for recommendatons. 
    Thank you!

    I just did a Google search and found several reviews on the first page.

  • I was advised to purchase dazzle video creator to move analog videos from an old sony camcorder to a mac.  I have purchased the dazzle and the specs seem to be for windows only.  Has anyone used this product on mac?

    I was advised to purchase dazzle video creator to move analog videos from an old sony camcorder to a mac.  I have purchased the dazzle and the specs seem to be for windows only.  Has anyone used this product on mac?

    I am not certain, but I believe there is a version of Dazzle for the Mac. However, it is not the route I would chose.
    You really need a proper analogue to digital converter, like the ADVC110, to connect to your camera via the usual RCA cables, and to your Mac via firewire.

Maybe you are looking for

  • Issue with value of  transient attribute after filtering or sorting a table

    Hi guys,   i'm using jdev 11.1.1.4.0 .   i've the use case :          - a table with a column containing a checkbox to mark the selection of  a row <af:column align="center" sortProperty="TemIsChosen" filterable="true" sortable="true" id="c6"> <af:se

  • Stabilize a Multicam Clip

    This is driving me nuts!    I'm used to being able to right click on a clip in an FCP timeline and say send to motion - stabilize *just that part of the clip* and return to FCP.  Job done.   Not so in Premiere Pro AE it seems. So, here's the problem.

  • How do I copy Camera RAW defaults to another computer?

    I use Photoshop CS6 and Adobe Camera RAW to process RAW files (D700).  I have ACR preferences set to make the defaults ASA specific, which means I have 41 defaults for ACR.  I have a folder of images shot with the D700 that includes one image for eac

  • How to add partition to an existing table

    I have a table that contains lot of data.I need to add partitions to it to improve the performance of the procedures using this table.This table is having no existing partition.

  • Centering my swf file

    I am looking for the html that will center my swf file and keep it centered even when the window is resized by the viewer. I've seen it done to almost every site I've been to, so I think it should be relatively easy.