Has anyone used Verizon Fios Services with Windows 7 ?

Has anyone used Verizon Fios Services  with Windows 7 ?

Yes Beta And RC. It works the same as Vista, with probably some enhancements. Didn't have any issues, but I did not try wireless.

Similar Messages

  • Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8?  What do I need to get/do?  thanks

    Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8?  What do I need to get/do?  thanks

    Hi 4judy,
    If you are looking to use an external display with your MacBook Pro, you may find the following articles helpful:
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/ht3382
    OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
    http://support.apple.com/kb/ht5019
    Regards,
    - Brenden

  • Has anyone used Aperture 2.0 with 8800GT?

    Has anyone used Aperture 2.0 with the new 8800GT? I'm about to order a new Mac Pro and wonder if Aperture will get a speed boost with the 8800GT over the HD 2600XT. I've read many times that Aperture is very GPU dependent, but then I've also read, on Barefeats.com for example, that the graphics card really doesn't do that much of a difference after all.
    For me, on my dual 2.0 G5 with 4.5GB and a X800XT, what's been most annoying with Aperture 1.5 has been the slow load times for raw images (15-20MB). But now with the quick preview mode in Aperture 2.0, that really isn't an issue any more.
    Is the 8800GT worth waiting for, or should I just get the Mac Pro now with the HD 2600XT?

    Hi Don
    I'm using Aperture 2.0 with the 8800GT. My system is the new MacPro 8 core 2.8GH with 10GB RAM. I'm shooting Nikon D3 lossless compressed RAW files. Approximately 12-14MB each.
    I do not need to use the quick preview mode. Images open instantaneously,either fit to screen or 100%. All the image adjustments are shown with no time lag. My D2X uncompressed raw files,19MB, display in approximately one second with quick preview turned off.
    I'm no MAC hardware expert so I don't know how much the speed is the result of the 8800GT but I'm just one happy camper.
    Hope this helps
    John Blake

  • Question for Anyone Using CS4 Production Premium with Windows 7

    I'm testing Windows 7 at home with CS3 Production Premium and have not had any issues. Of course CS4 is quite a bit different.
    Anyone using CS4 Production Premium on Windows 7 regularly? Any issues to report?
    Thanks

    Thanks for replying to my post:
    mark_m wrote:
    "I notice that when I open an old CS4 project and PPro asks you to locate the file, that the "show only exact file name" tick box seems to have no effect.
    This is on Windows 7 RC 64bit."
    On our systems at work that have XP and Vista + CS4 Production Premium.  I've noticed this with preview files in particular and possibly some others, I don't remember. The "show only exact file" checkbox is greyed out. This is somewhat annoying because projects can have a huge number of preview files with long  cryptic names making it a pain to locate the correct one manually to get the ball rolling. If I don't think it'll take too long to re-render, I just select "skip preview files".
    We bought 3 licenses for Windows 7 and I'm encouraged by the performance, reliability and features on my home test system (RC 64) that has CS3 installed. Can't wait to get rid of XP and Vista.

  • Ipod Touch 5th generation. Need help with Wi Fi. I use Verizon Fios service at home.

    At home my wi fi is ok from the Verizon Fios package i have. But when I am out Ipod does not always pick up hot spot wi fi. I would have to buy wi fi service.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Has anyone used Toast 7.02 with Dual Layer media?

    I bought a three-pack of Verbatim +R double layer discs just to experiment with (this is my first Mac with a DL burner). I've had some problems with Toast simply not responding but other than that occasional problem I've been able to burn Sony DVDs at 8x.
    I'd like to try to burn one of the dual layers but I don't know if I should start with Toast or just create a burn folder or just let the OS do its thing or what.
    Has anyone had experience with DL disks and Toast? The drive in my Intel iMac is a "MATSHITA DVD-R UJ-846" (I've heard that some iMacs have different mechanisms?)

    Thanks - I'm going to give it a go today. Just from the general impression I have from numerous conversations and lurking around here and other sites there seems to be a growing consensus that Verbatim DVD media is the best (and possibly CD media as well). I usually tend to simply buy whatever is on sell in the week when I'm running low and Sony media has done well while with Maxell (usually the brand on sale!) I usually find a few clunkers in a spool (mind you this was with my MDD G4,and I had both slots tricked out with Pioneer 106's).
    I'm going to go web crawling later today, too, to see what the best pricing is for Verbatim DL's - I paid $23 at Office Depot for three in jewel cases but it was the only DL packaging they had and I'm sure prices have come down! (One would think!)
    I've been using 7.02 since its release in November (?) but, with Toast, I always make certain not to trash my old app so that I'll not need to fish out the CD should new versions emit flying insects. I DO wish Roxio would release Toast as a Universal app - and soon! I also may try going back to 7.01 to see if that might 'fix' the occasional freeze I'm getting.
    Thanks so much for letting me know about your success with Toast and Verbatim +R DL media - I am almost borderline OCD about back-ups and the more I can fit on a single disc the merrier I will be!

  • Has anyone used a MacBook Air with a TV as a monitor?

    Wondering if anyone can advise on experience with using a tv as a monitor? I don't believe Mac make just a monitor for this purpose do they?

    it's ok, highly pixelated, meaning you will see pixels. I would say its great to watch videos, but any reading or such will be displeasing. Really depends on the pixels per inch of your TV also. But, I would stick with nothing more than 27" for reading or anything text based.

  • Has anyone used a NI 9134 with DasyLab 13

    I am consdiering purchasing a NI 9134 for in vehicle data logging. I would like to run it using DasyLab 13.
    Has anyone tried this?
    There's never time to do it right, but there's always time to do it over!

    Devon,
    I think that it's pretty reasonable to ask about NI hardware support by NI software. That's one of the goals of this board.
    Will DASYLab run on a cDAQ-9134?  Has anyone done it? Can anyone who has one try it? 
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • Has anyone used Verizon Messages Desktop App

    I'm curious, is there anyone out there that has used the Verizon Messages Desktop App? Were you able to use it successfully? Can you still?
    You can download it here (The icon that says "Download Desktop App")
    Verizon Messages - Verizon Wireless
    I opened this thread which I'm pretty sure has just joined all of the other forgotten threads that never get answers.
    VERIZON MESSAGES PC App

    I have downloaded the Message+ application for 64 Bit Windows 7.  It's a wonderful idea and I think it's just great.  Unfortunately, its performance is inconsistent, the interface is not intuitive, certain features are difficult to use,  certain obvious features are missing and there is no integrated help facility.  I have elaborated on some of them, below.  Be aware that I have not had this program for very long, so there may be answers and explanations that I am not aware of.  And I might simply be wrong.
    Performance is inconsistent:
    Messages which appear on your phone will either immediately appear on your Message+ window (which is wonderful) or they will never appear, ever.  Even waiting for hours doesn't get them.  Exiting and running the application won't get them--they simply don't show up.
    The program sometimes hangs for no readily apparent reason, thus hanging every single window associated with it.  Once this happens, this is a solid hang.  The program will simply not process any more windows messages at all.  Since it will not handle a WM_CLOSE, you can not kill it from the task bar, you'll just get a beep.  You must use the Windows Task Manager to do it.  Once you have killed it, it will steadily hang more frequently.
    Message+ can get into such a state that it will no longer start, no matter what you do.  You can look at your processes, see that it is not there, but trying to run it give you a brief blink and nothing happens.  A full reboot may fix this, but I do not know because I have not performed one.  I think that is just too drastic and I simply have too much other stuff going on.
    Once performance starts to degrade, it does so rapidly.  Message+ will simply stop receiving ALL SMS messages with no indication why.  There is no obvious way to reset this.
    Attempting to fix the application by choosing Repair from the installation program (which is not documented anywhere) produces mixed results.  The repair process takes an extremely long time and the progress bar barely moves making one think that the repair has hung.  It is an exercise for the truly patient (or desperate).  This will fix the program enough so that it will start again, but performance will be poor and hangs will become more frequent.
    A repair inconsistently leaves messages around.  One contact may still have messages while another has them all deleted.  There is no readily apparent reason for this behavior.
    Once you stop receiving messages, you do so forever.  Even a repair doesn't fix the problem.
    Close buttons [X] do not consistently work.  Sometimes you got to click them a few times.
    The interface is not intuitive:
    On just about any GUI that you've ever heard of, available buttons or hot spots are highlighted in some way.  The Message+ application does not follow this paradigm; the entire interface is flat and there is no indication of what you can click on unless you directly click on it.
    It is not clear what a button does until you click on it.  Some of the symbols are not obvious nor are they documented in any readily access place.
    Icons can bring up windows which are either docked to the main window or separate with no readily apparent design.
    Windows are launched with either a double or single click, which is startling and inconsistent.  There is no readily apparent reason for this behavior.
    You can do different things based on whether you are in edit mode or not, but it is not described anywhere how to do this and it is not obvious how to get out of it while you are in it.  You've got to hunt around and experiment.
    It is confusing to figure out what phone number to synchronize with.  I installed the program only three days ago and now I have completely forgotten how to do this.
    Certain features are difficult to use:
    Trying to get at the text of a message is tortuous.  You've got find very tiny dim icons which may or may not be there.  Sometimes you'll manage to get a pop up with a right click, but all the options will be greyed out.  There is no way to figure this out except by (laboriously) clicking on every part of every window at each stop to see what you can do.
    You can only select a single message text at a time for certain things.  If you want to get an entire thread, there is no way to do this.  You can select multiple messages in edit mode, but the only available action is to delete all of them.
    You can get per message info, which is great, but you have to do it on ever single message.
    The scroll bar performance is poor.  It is very difficult to determine where you are in a window, scrolling control is jerky, trying to move up a little bit at a time does not work.
    Trying to find the program on the Verizon website to download it is not directly obvious.  You can Google the web for messages, some of which have hard URL's that you can click on to get to the right place.
    Certain obvious features are missing:
    SMS messages contain valuable information and there is no way to save a message stream to file.  This is lack of functionality is positively astounding.  You've got to scroll through the message and take screen shots.
    The arrow buttons do not consistently scroll window contents.  They typically work, however.
    Messages which are sent to a Jetpack (they have phone numbers) are not caught, which is puzzling.
    You can not display message contents and information at the same time.  This makes it doubly tedious to record information.
    There is no undelete, roll back, restore or recover feature.  Once you delete a message it's gone.  Forever. Even undelete programs do not work because the delete is not apparently file based.  You can hunt through the block list, but this can get tedious.
    There is no way to back up or restore the entire database.  Some of this material is critical.
    There is no export function.  You can not export to a .PDF to e-mail to somebody.  You can not export to a .CSV for offline analysis.
    Help:
    There is no integrated help facility..  You can not pull up a window of descriptions of basic tasks.
    There does not appear to be an online FAQ located in any obvious place.
    It is difficult to Google for help online, you must always put Message+ in double quotes, "Message+" or you will get unexpected results.
    There does not appear to be any large experienced user community on the Web yet.  This support site is probably your only realistic chance of getting some useful information.  Otherwise, there are many, many questions out there.
    The Send Feedback Function does not work if you do not have an installed mail client on your desktop. If you are using a web based one, gmail for example, a browser window will start with the entire message stuffed into the URL bar.  You've got to cut the text out of the URL and paste it into separate fields in your message.  You've better off just simply sending an e-mail to [email protected].  Thus far, however, I have yet to receive a single response.  Sometimes hitting the Submit button performs no function at all.  The window simply stays up and nothing happens.
    In summary, I think it's a great idea, but I simply don't think the User Interface engineering is all that thought out.  The look and feel of an application of an application are absolutely critical to successfully exploiting the functionality.   You should only deviate from (decades old) graphical  interface paradigms when you really have something different to do.  Message+ is performing basic functions, it doesn't need window glitz.  Glitz for glitz's sake is just plain annoying and causes a needless learning curve.  Further, Message+'s glitz is uninspiring and in some cases, downright confusing.
    The flawed functionality, the stability, the data lose, the lack of obvious features and the near complete lack of documentation make me think that this is essentially an unfinished or alpha stage product and one would hope for improvements as new version roll out (if they ever do).
    If anyone knows of any alternatives to Message+ that do what it does, I'd love to hear about it.  However, I am only interested in capturing SMS messages, not sending any sort of e-mail or data.

  • Has anyone used Rhapsody To Go with their Zen Vision

    I'm getting a Zen Vision M later this month to replace my Zen Xtra. I have the Rhapsody To Go service. I was wondering if anyone else uses Rhapsody. I want to know how easy/difficult it is to tag songs with album art after the music has been transfered to the player via Rhapsody.

    bumping thread......
    If anyone has used Rhapsody with their Vision M, I'd like to ask you a few questions.

  • Has anyone used this cool WebCam with a Mac yet?

    i'm in the market for a webcam for my new mac pro. i'm looking for the very best one out there. i ran into this WebCam called "aGent V4 HD". It looks awesome! Its a 3MP HD WebCam that comes with a desk mount and LCD mount. But its sold out of Australia. I was wondering if anyone has used it with osx 10.5.6.
    here's a link:
    http://agent.liquiddigital.com.au/index.htm

    I've just taken delivery of one of these and have to say that, a few glitches aside, I'm pretty impressed. It looks quite sexy and gives a great quality picture that has been commented on by all Skype correspondents who hitherto were used to my looking like a bowl of porridge.
    It comes with 3 useful mounting devices including a great grappling hook looking thing which will hang on top of my 30" cinema display but I actually prefer to have it on the floor stand at head height otherwise the angle is a bit high from all the way up there.
    The only disappointment for me is that I cannot seem to get the internal mic working. Fortunately it does come with a clip on mic which does work when plugged in via the USB gizmo but the built in cam mic just won't play for me.
    I wonder if I'm missing something because I have an older webcam with a built in mic which again I have never had any joy with.
    Any useful suggestions in this point gratefully received!

  • Has anyone used the HP Service Center / Manager Connector

    I am interested to know if anyone has used the OEM connector for either of the HP Service Desks
    Ideally I would like to find a reference to understand it stability etc........
    Thanks

    You should still be able to efile 2013 which will expedite the posting of your returns as well.The TPA can be helpful but you have to stay on top of them......the case advocate assigned to your case.  They can be a bit slow on the uptake.the main thing is gettng them prepared and filed......and then the IRS to process and post them (which efile is much faster).If you mail them in....it will take weeks for them to process and post becuase they are a previous year return.....but not as bad as years prior to 2013. Older year returns just take the IRS longer to process..... 

  • Has anyone used a canon zr850 with FCEHD?

    I am thinking about buying a Canon zr850. Does anyone here have one? How campatible is it with FCHD? Any tips on Camera's?

    The ZR850 will work with FCE. You should look for camcorders that -
    - record to DV and/or HDV
    - use tapes
    - have Firewire output
    The ZR850 has all three.
    However, it does not have an external mic input, which you will quickly find limiting unless all you're filming is 'kids in your backyard.' The ZR800 has an external mic input.

  • Has anyone used Lookout 4.5 with Motorola MOSCAD?

    If so, please send me an e-mail at [email protected] My question is, Can I use the ModbusMOSCAD driver to talk directly to a RTU in the field via radio without using a FIU or do I have to use and FIU and talk modbus to the FIU and let the FIU gather the info from the field?

    Here's what the Lookout online help says:
    The ModbusMOSCAD object class works with Motorola MOSCAD PLCs and RTUs. It also uses the Modbus Serial (ASCII or RTU) or Modbus Plus communication protocol, but its data members reflect the address of Motorola MOSCAD devices.
    It looks like you should be fine using the modbusMOSCAD object in Lookout

  • Has anyone used an XML payload with AQ on 9i?

    No problems with Raw types but can't find any examples of sending and XML doc as the payload. Getting the following error from the snippet I have included.
    oracle.AQ.AQException: JMS-195: Invalid object type: object must implement CustomDatum/ORAData or SQLData interface
    The queue payload is defined as an XMLType.
    /* Creating a message to contain raw payload: */
    message = queue.createMessage();
    /* Get handle to the ObjectPayload object and populate it with data: */
    Document doc = DOMBuilder.buildIt();
    obj_payload = message.getObjectPayload();
    obj_payload.setPayloadData(doc);
    /* Creating a AQEnqueueOption object with default options: */
    enq_option = new AQEnqueueOption();
    /* Enqueue the message: */
    queue.enqueue(enq_option, message);
    System.out.println("Successful enqueue");

    Which version are you using? I also had problems with XML as the payload with 9i Rel. 1. I upgraded to Rel. 2 and it works o.k.

Maybe you are looking for