Has Anyone used View Generator in Workspace Manager 10.2.0.3A

It does not seem to show the dimensional attributes and all the pretty pictures in the blogs/forums seem to work!!!!
Can you tell me if I am missing something?

Hi,
View Generator appears to be an OLAP product, which is distinct from Workspace Manager. I would recommend to use the following forum:
OLAP
Regards,
Ben

Similar Messages

Has anyone used the HP Service Center / Manager Connector

I am interested to know if anyone has used the OEM connector for either of the HP Service Desks
Ideally I would like to find a reference to understand it stability etc........
Thanks

You should still be able to efile 2013 which will expedite the posting of your returns as well.The TPA can be helpful but you have to stay on top of them......the case advocate assigned to your case. They can be a bit slow on the uptake.the main thing is gettng them prepared and filed......and then the IRS to process and post them (which efile is much faster).If you mail them in....it will take weeks for them to process and post becuase they are a previous year return.....but not as bad as years prior to 2013. Older year returns just take the IRS longer to process.....

Has anyone used "Final Cut Library Manager" with FCP X 10.1?

I've just noticed this inexpensive app which looks interesting.
http://www.arcticwhiteness.com/finalcutlibrarymanager/
Has anyone used it?
Comments?

I assume you are referring to Event Manager which I also found extremely good.
On the face of it, this looks rather like EM's successor plus a more "FCP X" looking interface.
At first sight it promises to be a "must have" app, but it's only by using it that its true worth and any potential flaws will be revealed.
What's good is that you can download the demo version (not quite fully functional) to try out before you buy.
Message was edited by: Ian R. Brown

Has anyone used Device Management?

In many Nokia phones there is a choice for upgrading the firmware via the device management.Does it work?Has anyone used it?

http://forums.ni.com/t5/Multifunction-DAQ/Does-NI-offer-USB-extension-solutions/td-p/381873
http://forums.ni.com/t5/Dynamic-Signal-Acquisition/Using-a-quot-USB-2-0-extender-over-Cat-5-quot-to-...
http://forums.ni.com/t5/Multifunction-DAQ/Can-I-use-a-USB-Extender-with-USB-6008-or-cDAQ/td-p/920361
Let me know if you have any more questions.
Product Support Engineer
National Instruments

Re: Interfaces in Forte - has anyone used them?

We are making use of interfaces extensively and have never had the
slightest problem. Interfaces do not cause any overhead, since they are
mainly a means to support type checking by the compiler. At run-time the
interface does not appear any more.
Using Forte 3.0.F.2
General wrote:
>
We are embarking on the analysis phase of a large pay/personnel project. =
We have been advised to use interfaces wherever possible, because they =
promote flexibility and reusability. I am fairly well convinced of the =
benefits of using interfaces - they appear to have a lot of advantages, =
and no drawbacks. However, I do wonder whether Forte's implementation of =
interfaces is stable and usable (..it was only introduced in version 3). =
If not, we may be better advised to use standard techniques.
If you have used Forte interfaces I would be interested to hear how you =
got on.
regards,
Tim Kimber--
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Eric,
You are correct, "manipulate anAIFace object" is not really the correct
way of thinking about what is happening. We are really manipulating an
instance of an object through an interface.
In regards to your other statement: "if Project C needs visibility to B,
it must have B as a supplier Plan." Forte does not force this to happen
when you are using interfaces, which is what causes the problem. Let me
expand on my initial example and add enough detail so that you can create
the problem, which surfaces as a deserialization error:
Project A (No Supplier Plans)
Defines Interfaces: UnitIFace with method GetValue() which returns an
integer
Project B (Contains A as a Supplier Plan)
Defines Class: Unit with attribute _Value as an integer and method
GetValue() which returns _Value. Implements interface UnitIFace.
Project C (Contains A as a Supplier Plan)
Defines Class: Square with method Calculate which accepts an
UnitIFace as an input parameter and returns an integer. This class needs
to be setup as a distributed object so that I service object can be
defined using this class.
Defines Service Object: SqaureSO using the Square class.
Project D (Contains B and C as Supplier Plans)
Defines a class or uses a window that creates an instance of Class B
and passes it to the SquareSO service object that sqaures the value and
returns an integer.
Once this is setup, use the running man to run everything locally. This
will run fine because the dependencies for the local partition end up
including Projects A, B, C and D. Next, run distributed and move the SO
to a remote partition. Now when you execute you will receive a
deserialization error. This happens because the dependencies for the
remote partition only included project A and C. The partition did not
have the necessary information to deserialize the underlying instance of
Class Unit that is referenced through the inteface UnitIFace.
The problem can be resolved by either adding Project B as a supplier plan
to Project C or ensuring that the interface and class are declared in the
same project as I suggested in my previous message. In either case, this
must be resolved by the programmer since Forte is not yet smart enough to
correctly resolve the project dependencies, even though all of the
information needed to establish the correct dependency hierarchy is
available.
Bradley K Wells
[email protected]
Strong Capital Management, Inc
http://www.strong-funds.com/
From: Eric Pereira
Sent: Friday, July 31, 1998 5:57 PM
To: [email protected]
Cc: [email protected]
Subject: RE: Interfaces in Forte - has anyone used them?
Bradley,
Thanks for that descriptive note on interfaces.
I do have a observation : in that example you gave us, if Project C
needs visibility to B, it must have B as a supplier Plan. Therefore, I
don't quite understand how partioning classes in C would end up with a
run-time errror in distributed mode, given that B supplies C (something
you've perhaps missed out in your example ?).
Also, is it really possible to "manipulate AIFace objects" ? Interfaces
are'nt really objects, they just help implement a compile-time type
check.
Thanks.
Eric Pereira
Forte Consultant
----<snip>------------------
Example:
Project A - Contains AIFace
Project B - Contains Class B which implements AIFace, depends on Project
A
Project C - Contains Classes manipulating AIFace objects, depends on
Project A
This can run fine locally since the local partition has knowledge of all
the classes in A, B, and C. Now as soon as you throw a service object
on
classes on Project C and push them into a remote partition, your
application starts failing because that partition does not contain the
information form project B since there is no dependency on that project.
The partition needs the information from project B though since it
contains the definitions for the actual implementation objects, however
there was no way for Forte to determine that need when it generated the
partition.
This problem is initially eliminated by keeping the interfaces in the
same project as the underlying business objects. But once you start to
have interfaces implemented by multiple classes from multiple projects,
then this won't cover all the bases either. In any case, it is an issue
that you will need to consider at some level when using interfaces.
Good luck!
Bradley K Wells
[email protected]
Strong Capital Management, Inc
http://www.strong-funds.com/
From: "Ngai, Stuart" <[email protected]>
Date: Thu, 30 Jul 1998 11:10:50 -0400
Subject: RE: Interfaces in Forte - has anyone used them?
With version 3G, you can not create an array of interfaces. I believe
Forte
will have that feature in version 4 (which is scheduled to be in
production
at the end of next year).
-----Original Message-----
From: Thomas Kunst [SMTP:[email protected]]
Sent: Thursday, July 30, 1998 8:52 AM
To: [email protected]
Cc: General
Subject: Re: Interfaces in Forte - has anyone used them?
We are making use of interfaces extensively and have never had the
slightest problem. Interfaces do not cause any overhead, since theyare
mainly a means to support type checking by the compiler. At run-timethe
interface does not appear any more.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Has anyone used "Microsoft.BizTalk.B2B.PartnerManagement" API ?

Hello, forum; trying to make sense of that undocumented API library to create an agreement using BizTalk 2010. So far, I can create a Partner, Business Profiles, Business Identities and Partnerships, but how to create an agreement (onewayagreements and all
that) still eludes me. I have checked one reference, it was written by Mick Breeze (http://blogs.breeze.net/mickb/2012/05/22/BizTalk2010CreatingTPMPartnersThroughCode.aspx),
and also getting inspired by the newest published in here (http://msdn.microsoft.com/en-us/library/windowsazure/dn232396.aspx) which is not the same but at least it's something.
I have navigated through the classes but I can't manage to do all the tasks that it is suppose to achieve.
Has anyone used this before that may be able to help ? Is there any SDK sample of some sort ?
Thanks in advance.

Partner automation. The user wants to use an asp.net form instead of using biztalk admin console, in order to create and update a large party database, the total count rounding between 300 to 500 partners, so, we have already a webform with all business
related information and we've add some port related information that will ultimately end up as the party information. With that info, this library should be able to accomplish everything we normally do from the console.
We are not migrating from a previous version, so the party migration tools is a no-go. We explored the idea of creating a binding-like file that would be loaded from BtsTask, but ultimately, we end up with the idea of using this obscure library to perform
all those so called duties of handling party related information on biztalk server.
Thanks in advance.

Is anyone using the Oracle Software Configuration Manager (SCM) feature?

I would like to provide version control over my forms development process (check in, check out, etc). I see that there is a built in Oracle Software Configuration Management tool. Has anyone used it?
Any pros?
Any cons?

Hi Daniel, it looks like Bruce has succinctly and accurately described configuration of the ImportManager step above (8/13).
One thing I could add is that the Key Field for Manager ID field should be set to the LDAP attribute that contains the 'pointer' to a given person's manager.
For example, given John Smith's sample LDAP record with the following attributes and values:
givenName = John
sn = Smith
uid = jsmith01
mgrUid = mmartin51
In this exam

Has anyone used DETOX MY MAC and can it be trusted

My Mac Mini n now running very slowly, its difficult to open up anything, and starts up really slowly. In general its just a pain. For a week now I can't open my emails in AOL, I can see them but can't open them.
I have thought about DETOX MY MAC but I am worried that I will just be downloading more problems. Has anyone used it and can it be trusted
Thanks Ann

Don't install such "utilities." They're all scams.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Has anyone used the Nokia 2700 as a modem with the Macbook 10.6.7

I have managed to sync my Nokia 2700 classic GSM handset to my Macbook through iSync. How can I use the phone as a modem if I have a 3G mobile service?
Many thanks in advance,
Dileep

louisfromleonia wrote:
Has anyone used the macbook air superdrive connected to a macbook pro - with a source DVD,via usb as a destination drive for burning DVDs?
I don't use the Apple SuperDrive but an LG GP08NU6W. works great! You can get one here:
http://www.amazon.com/LG-Electronics-GP08NU6W-External-Drive/dp/B003D1DESS
I got the white one.

Has anyone used macKeeper and is it .k?

has anyone used macKeeper and is it o.k?

You do not want to use MacKeeper. Third party maintenance utiities are not necessary on a Mac.
If you have installed it, follow the instructions here > Uninstalling MacKeeper
Let your Mac run maintenance for you > Mac OS X: About background maintenance tasks
To view other threads regarding MacKeeper, click, "More Like This" right side of this page.

- it doesnt want to drag? Has anyone used this software with imovie?

I am trying to transfer vhs movies to my harddrive using videglide I have successfully recorded it and saved it onto my desktop but I cant seem to transfer the movie to iphoto for editing - it doesnt want to drag? Has anyone used this software with imovie?

I presume you mean Videoglide - which I had never heard of.
Having read the specs:
http://www.echofx.com/videoglide.html
I am wondering how it manages to digitise analogue video from a VCR. For that I use an analogue to digital converter that imports straight into iMovie via firewire.
You should contact the developers of Videoglide for instructions on how to use it.

Has anyone used BootStrap Tour or PageGuide.js with their SAPUI5?

Hello,
Has anyone used any of these guide frameworks or something similar on their web applications across multiple views?
Regards,

This is a menu that has been created using Fireworks as can be verified by the following statement

The creation date tells me that the menu was created just on a week ago.
So you are now having a problem with the newly created non-Spry menu! What better place to drop in then our trusty Spry Forum that deals with Spry related issues.
We will help you though.
http://www.greatermichiganpmc.org/ looks for a style sheet that it cannot find unlike http://www.greatermichiganpmc.org/pmc.htm where it has been found. Change the URL (in red) to reflect where the style sheet resides.
<script language="JavaScript1.2" type="text/javascript" src="mm_css_menu.js"></script>
<style type="text/css" media="screen">
@import url("./pmc.css");
</style>
I hope the above helps our mates using Fireworks.
Ben

Has anyone used JAAS with WebLogic?

Has anyone used JAAS with Weblogic? I was looking at their example, and I have a bunch of questions about it. Here goes:
Basically the problem is this: the plug-in LoginModule model of JAAS used in WebLogic (with EJB Servers) seems to allow clients to falsely authenticate.
Let me give you a little background on what brought me to this. You can find the WebLogic JAAS example (to which I refer below) in the pdf: http://e-docs.bea.com/wls/docs61/pdf/security.pdf . (I believe you want pages 64-74) WebLogic, I believe goes about this all wrong. They allow the client to use their own LoginModules, as well as CallBackHandlers. This is dangerous, as it allows them to get a reference (in the module) to the LoginContext's Subject and authenticate themselves (i.e. associate a Principal with the subject). As we know from JAAS, the way AccessController checks permissions is by looking at the Principal in the Subject and seeing if that Principal is granted the permission in the "policy" file (or by checking with the Policy class). What it does NOT do, is see if that Subject
has the right to hold that Principal. Rather, it assumes the Subject is authenticated.
So a user who is allowed to use their own Module (as WebLogic's example shows) could do something like:
//THEIR LOGIN MODULE (SOME CODE CUT-OUT FOR BREVITY)
public class BasicModule implements LoginModule
private NameCallback strName;
private PasswordCallback strPass;
private CallbackHandler myCB;
private Subject subj;
         //INITIALIZE THIS MODULE
           public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
                  try
                       //SET SUBJECT
                         subj = subject; //NOTE: THIS GIVES YOU REFERENCE
TO LOGIN CONTEXT'S SUBJECT
                                                 // AND ALLOWS YOU TO PASS
IT BACK TO THE LOGIN CONTEXT
                       //SET CALLBACKHANDLERS
                         strName = new NameCallback("Your Name: ");
                         strPass = new PasswordCallback("Password:", false);
                         Callback[] cb = { strName, strPass };
                       //HANDLE THE CALLBACKS
                         callbackHandler.handle(cb);
                  } catch (Exception e) { System.out.println(e); }
     //LOG THE USER IN
       public boolean login() throws LoginException
          //TEST TO SEE IF SUBJECT HOLDS ANYTHING YET
          System.out.println( "PRIOR TO AUTHENTICATION, SUBJECT HOLDS: " +
subj.getPrincipals().size() + " Principals");
          //SUBJECT AUTHENTICATED - BECAUSE SUBJECT NOW HOLDS THE PRINCIPAL
           MyPrincipal m = new MyPrincipal("Admin");
           subj.getPrincipals().add(m);
           return true;
         public boolean commit() throws LoginException
               return true;
    }(Sorry for all that code)
I tested the above code, and it fully associates the Subject (and its principal) with the LoginContext. So my question is, where in the process (and code) can we put the LoginContext and Modules so that a client cannot
do this? With the above example, there is no Security. (a call to: myLoginContext.getSubject().doAs(...) will work)
I think the key here is to understand JAAS's plug-in security model to mean:
(Below are my words)
The point of JAAS is to allow an application to use different ways of authenticating without changing the application's code, but NOT to allow the user to authenticate however they want.
In WebLogic's example, they unfortunately seem to have used the latter understanding, i.e. "allow the user to authenticate however they want."
That, as I think I've shown, is not security. So how do we solve this? We need to put JAAS on the server side (with no direct JAAS client-side), and that includes the LoginModules as well as LoginContext. So for an EJB Server this means that the same internal permission
checking code can be used regardless of whether a client connects through
RMI/RMI-IIOP/JEREMIE (etc). It does NOT mean that the client gets to choose
how they authenticate (except by choosing YOUR set ways).
Before we even deal with a serialized subject, we need to see how JAAS can
even be used on the back-end of an RMI (RMI-IIOP/JEREMIE) application.
I think what needs to be done, is the client needs to have the stubs for our
LoginModule, LoginContext, CallBackHandler, CallBacks. Then they can put
their info into those, and everything is handled server-side. So they may
not even need to send a Subject across anyways (but they may want to as
well).
Please let me know if anyone sees this problem too, or if I am just completely
off track with this one. I think figuring out how to do JAAS as though
everything were local, and then putting RMI (or whatever) on top is the
first thing to tackle.

Send this to:
newsgroups.bea.com / security-group.

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Hi 4judy,
If you are looking to use an external display with your MacBook Pro, you may find the following articles helpful:
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
Regards,
- Brenden

Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband. How do I set it up?

Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
Thanks, Doctor Mark

Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

Has Anyone used View Generator in Workspace Manager 10.2.0.3A

Similar Messages

Maybe you are looking for