Has anyone used WRT54G v5 with Airport extreme?

Like the title says, has anyone gotten the linksys wrt54g version 5 firmware 1.00.9 to work in wds with the extreme? Also, did the ethernet port on the airport extreme work to connect a computer on the internet?

I presume you are talking about the Airport Express base station?
Like the title says, has anyone gotten the linksys
wrt54g version 5 firmware 1.00.9 to work in wds with
the extreme?
It has been reported many times that the v5 firmware stops you from using an Express and WRT54G with WDS.
Also, did the ethernet port on the
airport extreme work to connect a computer on the
internet?
In WDS mode the ethernet port of the Airport Express is active and yes you can connect a computer.
iFelix

Similar Messages

  • Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

    Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

    Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

  • Has anyone used an app with the Maverick software to burn iPhoto slideshows to DVD disks that will play on any DVD player?

    Has anyone used an app with the new Maverick software to burn iphoto slide shows to DVDs that will play on a standard DVD player?  This probably cannot be a demo app in that the amout of photos on the slideshows is large.  
    Thank you,
    Jim

    Export the slideshow from iPhoto, that makes a movie of it.
    Do you want to use this DVD in a domestic DVD player? If so, then the disk will have to be 'authored' to make it the correct form for that. If you have iDVD then that's the app you use. However, iDVD is no longer developed or distributed by Apple. You may be able to get it on an old iLIfe install disk.
    Other options:
    Burn: http://macupdate.com/app/mac/21992/burn
    Toast: http://macupdate.com/app/mac/6351/toast-titanium
    But there are lots of others too. Search on the App Store or MacUpdate

  • Has anyone used iPhone 4s with Oticon Streamer Pro

    Has anyone used iPhone 4s with Oticon Streamer Pro

    I downloaded it today. Doesn't seem to work. It gives you to the option of playing from "Logic Pro" or "Logic Express". When I click "SET" to set the project to fire, all of my logic files are grayed (assuming that means they are not an option)... Waste of 20 bucks.
    Steve
    Branson, Missouri

  • - it doesnt want to drag? Has anyone used this software with imovie?

    I am trying to transfer vhs movies to my harddrive using videglide  I have successfully recorded it and saved it onto my desktop but I cant seem to transfer the movie to iphoto for editing - it doesnt want to drag? Has anyone used this software with imovie?

    I presume you mean Videoglide - which I had never heard of.
    Having read the specs:
    http://www.echofx.com/videoglide.html
    I am wondering how it manages to digitise analogue video from a VCR. For that I use an analogue to digital converter that imports straight into iMovie via firewire.
    You should contact the developers of Videoglide for instructions on how to use it.

  • Has anyone use camptune x with mountain lion even though says it does not support it yet

    HAs anyone used camptune x with mountain lion even though it is not yet specific to moutain lion yet?

    Tried it yesterday on my imac 21Jan 2013 running mountain lion 10.8.2, total disaster.
    Backed up my boot camp image using winclone (great programme)
    Purchased and ran camptune x and everything went fine.
    Rebooted into windows 7 and recieved error messages find--set--root--ignore floppies--ignore cd/bootmgr
    ERROR 15
    Gave me a list of options on screen but none resolved the issue.
    Booted back into winclone and used the backup image i had just created to reinstall on bootcamp.
    Have emailed the company but have had no reply as yet
    **** STAY AWAY until updated for mountain lion YOU HAVE BEEN WARNED ****

  • Is anyone successfully using Netgear WN3000RP with Airport Extreme?

    Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
    Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
    I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
    I'm using Airport Utility version 6.1.
    Can someone out there can let me know if they got this device working with their Airport Extreme?
    Also, what are my other options to extend my range?

    I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
    1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
    2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
    3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
    4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
    5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
    A Visual Representation would be
    ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
    In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
    An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
    Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

  • Has anyone used Mountain Lion with Time Machine for the WD MyBook Live Duo

    This NAS is working with OSX Lion.  But since I had trouble moving up to Lion with my previous WD NAS drive, I want to make sure that it works.
    Thanks

    Upgraded to Mavericks yesterday.  Seems to have gone well except for one thing.  My computer will not recognized my WD MyBook Live 3T and thus Time Machine will not work with it.  My wife's MacBook Pro is still running 10.6.8 and her computer is still working properly and doing back ups.  Called Western Digital Tech support and Apple Tech Support.  Not much helpl there.  I attempted to download and use the newest sofware (during Mavericks installation I did get a warning that the old WD software was not supported).  However, one of the first steps is getting the software to scan for the backup drive.  No dice.  The computer is not recognizing its existence at all in any place you might look.  So I am stuck and frustrated at this point.  I have plugged and unplugged things.  The MyBook Live is hooked up directly by ethernet cable to an Airport Extreme router.  My computer is hooked up by ethernet cable to the router and my wife's laptop uses the WiFi connection.  Apple Tech suggested a direct hookup to my computer.  My computer still would not recognize it.

  • Using VOIP router with Airport Extreme

    Hi,
    I'm sorry if this question has been asked before...I couldn't find it if it has!
    I currently have a Draytel 2800VG router for my internet connection, and connect my family Windows desktop and my MBP through it no problem. I use this router because it has telephone ports for VOIP (the SIP settings are in the router).
    I would like to buy an Airport Extreme so I get the benefit of the faster wireless speeds on my MBP. I will obviously then connect my desktop to the AE by cable.
    Can someone tell me if there is any way I can connect my Draytel router to the AE so I can still run my phone through for VOIP?
    Thanks
    Nige

    I assume the airport extreme setup allows me to specify that it's a 'bridge'?
    Yes, you can set it as a bridge by using the AirPort Utility: (AirPort Utility > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))
    When you say 'separate n wireless network', do you mean give it a different SSID, or band, to the Draytek...or something else.
    Yes, both the Draytek and the AirPort should be configured to use different SSIDs and (of course) different radio modes.

  • Has anyone used Express Scribe with Mavericks?

    I use Express Scribe every day, and I wanted to download Mavericks.  Has anyone done this successfully and does the foot pedal still work?

    I use Express Scribe every day, and I wanted to download Mavericks.  Has anyone done this successfully and does the foot pedal still work?

  • Do I need to use a modem with Airport extreme?

    I am trying to set up security cameras for my 90 yr old mom, and need to know if I need a modem with the Airport Extreme device?

    You'll need a modem to connect to the Internet. It doesn't have one built into it.
    (100434)

  • Has anyone used Fluqe OnStage with Logic Pro X Live?

    My colleague is looking for a way to automate his set list live using Logic.
    We were looking at OnStage.
    If anyone can let me know how it works, and if it's working well, I'd appreciate it.
    Charles

    I downloaded it today. Doesn't seem to work. It gives you to the option of playing from "Logic Pro" or "Logic Express". When I click "SET" to set the project to fire, all of my logic files are grayed (assuming that means they are not an option)... Waste of 20 bucks.
    Steve
    Branson, Missouri

  • Has anyone used VNC successfully with the portal?

    When I try to connect to vnc through the portal (eg http://server:5803), I can view the correct login page, but get the error "java.net.ConnectException. Connection refused", yet it works when NOT through the portal. Anyone have any insight? Thanks.

    Never tried VNC through the rewriter and http, but am not surprised at all that it won't work.
    We have created a VNC netlet that works nicely.
    VNC|/third_party/VNC-help.html|true|5900|TARGET|5900
    Gary Beshara

  • Re: Interfaces in Forte - has anyone used them?

    We are making use of interfaces extensively and have never had the
    slightest problem. Interfaces do not cause any overhead, since they are
    mainly a means to support type checking by the compiler. At run-time the
    interface does not appear any more.
    Using Forte 3.0.F.2
    General wrote:
    >
    We are embarking on the analysis phase of a large pay/personnel project. =
    We have been advised to use interfaces wherever possible, because they =
    promote flexibility and reusability. I am fairly well convinced of the =
    benefits of using interfaces - they appear to have a lot of advantages, =
    and no drawbacks. However, I do wonder whether Forte's implementation of =
    interfaces is stable and usable (..it was only introduced in version 3). =
    If not, we may be better advised to use standard techniques.
    If you have used Forte interfaces I would be interested to hear how you =
    got on.
    regards,
    Tim Kimber--
    Dr. Thomas Kunst mailto:[email protected]
    sd&m GmbH & Co. KG http://www.sdm.de
    software design & management
    Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
    Tel +49 89 63812-221 Fax -444
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Eric,
    You are correct, "manipulate anAIFace object" is not really the correct
    way of thinking about what is happening. We are really manipulating an
    instance of an object through an interface.
    In regards to your other statement: "if Project C needs visibility to B,
    it must have B as a supplier Plan." Forte does not force this to happen
    when you are using interfaces, which is what causes the problem. Let me
    expand on my initial example and add enough detail so that you can create
    the problem, which surfaces as a deserialization error:
    Project A (No Supplier Plans)
    Defines Interfaces: UnitIFace with method GetValue() which returns an
    integer
    Project B (Contains A as a Supplier Plan)
    Defines Class: Unit with attribute _Value as an integer and method  
    GetValue() which returns _Value.  Implements interface UnitIFace.
    Project C (Contains A as a Supplier Plan)
    Defines Class: Square with method Calculate which accepts an
    UnitIFace as an input parameter and returns an integer. This class needs
    to be setup as a distributed object so that I service object can be
    defined using this class.
    Defines Service Object: SqaureSO using the Square class.
    Project D (Contains B and C as Supplier Plans)
    Defines a class or uses a window that creates an instance of Class B
    and passes it to the SquareSO service object that sqaures the value and
    returns an integer.
    Once this is setup, use the running man to run everything locally. This
    will run fine because the dependencies for the local partition end up
    including Projects A, B, C and D. Next, run distributed and move the SO
    to a remote partition. Now when you execute you will receive a
    deserialization error. This happens because the dependencies for the
    remote partition only included project A and C. The partition did not
    have the necessary information to deserialize the underlying instance of
    Class Unit that is referenced through the inteface UnitIFace.
    The problem can be resolved by either adding Project B as a supplier plan
    to Project C or ensuring that the interface and class are declared in the
    same project as I suggested in my previous message. In either case, this
    must be resolved by the programmer since Forte is not yet smart enough to
    correctly resolve the project dependencies, even though all of the
    information needed to establish the correct dependency hierarchy is
    available.
    Bradley K Wells
    [email protected]
    Strong Capital Management, Inc
    http://www.strong-funds.com/
    From: Eric Pereira
    Sent: Friday, July 31, 1998 5:57 PM
    To: [email protected]
    Cc: [email protected]
    Subject: RE: Interfaces in Forte - has anyone used them?
    Bradley,
    Thanks for that descriptive note on interfaces.
    I do have a observation : in that example you gave us, if Project C
    needs visibility to B, it must have B as a supplier Plan. Therefore, I
    don't quite understand how partioning classes in C would end up with a
    run-time errror in distributed mode, given that B supplies C (something
    you've perhaps missed out in your example ?).
    Also, is it really possible to "manipulate AIFace objects" ? Interfaces
    are'nt really objects, they just help implement a compile-time type
    check.
    Thanks.
    Eric Pereira
    Forte Consultant
    ----<snip>------------------
    Example:
    Project A - Contains AIFace
    Project B - Contains Class B which implements AIFace, depends on Project
    A
    Project C - Contains Classes manipulating AIFace objects, depends on
    Project A
    This can run fine locally since the local partition has knowledge of all
    the classes in A, B, and C. Now as soon as you throw a service object
    on
    classes on Project C and push them into a remote partition, your
    application starts failing because that partition does not contain the
    information form project B since there is no dependency on that project.
    The partition needs the information from project B though since it
    contains the definitions for the actual implementation objects, however
    there was no way for Forte to determine that need when it generated the
    partition.
    This problem is initially eliminated by keeping the interfaces in the
    same project as the underlying business objects. But once you start to
    have interfaces implemented by multiple classes from multiple projects,
    then this won't cover all the bases either. In any case, it is an issue
    that you will need to consider at some level when using interfaces.
    Good luck!
    Bradley K Wells
    [email protected]
    Strong Capital Management, Inc
    http://www.strong-funds.com/
    From: "Ngai, Stuart" <[email protected]>
    Date: Thu, 30 Jul 1998 11:10:50 -0400
    Subject: RE: Interfaces in Forte - has anyone used them?
    With version 3G, you can not create an array of interfaces. I believe
    Forte
    will have that feature in version 4 (which is scheduled to be in
    production
    at the end of next year).
    -----Original Message-----
    From: Thomas Kunst [SMTP:[email protected]]
    Sent: Thursday, July 30, 1998 8:52 AM
    To: [email protected]
    Cc: General
    Subject: Re: Interfaces in Forte - has anyone used them?
    We are making use of interfaces extensively and have never had the
    slightest problem. Interfaces do not cause any overhead, since theyare
    mainly a means to support type checking by the compiler. At run-timethe
    interface does not appear any more.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    Get Your Private, Free Email at http://www.hotmail.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Has anyone setup a Canon PIXMA MP500 Photo All-in-One with Airport Extreme

    Hi,
    This printer is fairly well rated but I don't know if its compatible with Airport Extreme and 10.4, and if so how difficult was the set up.
    Also, if you can suggest a multifunction printer that works well with Airport Extreme and 10.4, I'd appreciate it.
    Thanks,
    MK

    First, Only printing works for multifunctions connected to Airport Extreme/Express.
    See this:
    http://www.ifelix.co.uk/tech/1300.html
    And read through the separate Discussions forum here for Airport Extreme/Express-connected printers.

Maybe you are looking for