Has Apple added the ability to put Motion docs in a FCPX timeline yet?
Much of my workflow depends on editing Motion Documents in a FCP7 timeline. I know about the ability to save a Motion doc as a template, but I haven't found a way to edit the Motion doc once it's in the FCPX timeline outside of rigs, etc. I need to be able to green screen people into my Motion documents weekly, and green screening through rigs, positioning them in 3D, rendering each individual cut from FCPX to a mov file to a DropZone, and then more editing after that.... it gets complicated and cumbersome. All that I really need is to choose a Motion Doc in a FCPX timeline and open it in Motion as needed - maybe when you right click the doc you see a nice big "Open in Motion" graphic or something - the fact that you can place a Motion file in the timeline makes me think they're not too far from this. Is this a planned addition?
Not a current feature.
"Is this a planned addition?" Apple rarely makes promises of future features publicly. Anyone who would know privately wouldn't be allowed to reveal anything here.
Similar Messages
-
Removing this ability has to be one of the worse moves that apple has made. Beleave it or not some people may not want to connect to use iCloud.
I hate iCloud, too
Never use it. I don't want to trust any of my real important data to remote servers.
Especially don't trust Apple and their servers with personal contacts info, my calendar and appointments info, personal note, etc.
I want the ability back to sync calendars, notes, contacts to my local computer and local storage. -
Why has ios6 removed the ability to gift on iPhone
Why has Apple removed the ability to gift Apps and music in ios6? I'm so, so angry about this issue. I want it back IMMEDIATELY!!!!!!
Hi, I have a similar problem. I live in the UK in an area where the 3G signal is weak. Ever since I have used iphone (since iphone 3G) - I have used it with 3G switched off when at home. That way it was forced to use the GPRS (or 2G) mobile signal from o2.
This worked fine, and I had 4 or 5 bars of signal always. If I enabled 3G at home that would drop to between 1 bar and NO SERVICE. This made using the iphone as a telephone virtually impossible as call quality was rubbish and often dropped out.
I used wifi for internet so it was never an issue, and I switched on 3G when out if I needed it.
Since the ios8 upgrade APPLE have taken away the ability to switch between 2G and 3G. Instead the button now switches between 4G and either 2G or 3G, this either is decided by the iphone itself depending on the strength of the 2G and 3G signals.
I have spoken to APPLE twice about this. The first time yeaterday they flatly blamed o2 and said it was nothing to do with them. So I called o2 and guess what; yes you got it, they blamed Apple. IT reminded me of when Steve Jobs got up on that stage and denied there was ever a problem with the iPhone 4 antenna a few years back.
So I called Apple back, and today the guy I spoke to did seem to understand my problem and sympathise with it. He said I was not alone and that hopefully it would be fixed by an update.
Luckily for me I am only 3 months away from an upgrade, so if they dont fix it by then I am going to take the leap and jump to Android.
The short term solution - and you need to be quick if you have already upgraded to ios8, is to downgrade to ios7.1.2
This is not officially supported by Apple, but it you google it, it is quite easy, you have to download an ipsw file and then do a restore in itunes, but you will lose everything on the phone, and you cannot back up from a backup made with ios8.
I hope they sort this out, it has driven me mad over the past 2 days.
We need the Toggle between 2G and 3G to be re-instated. -
I have suddenly lost the ability to put events in the calendar on my iPhone. I have rebooted twice and still nothing. Does anyone have a so,union for me?
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.Try to use an alternate Internet connection if available:
Try a different Wi-Fi connection
If your iOS device has an active cellular data plan, tap Settings > Wi-Fiand turn off Wi-Fi.
If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again. -
Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig? IPConfig /flushdns doesn't help at all. Until they fix it I will be previewing and buying my songs thru Amazon.
Doublechecking ... do you still get that if you update to iTunes 10.6.3.25 (just released today)?
http://www.apple.com/itunes/download/ -
Can anyone help...
I just bought a used iMac (2008) from an ebay seller and I'm trying to install quicktime but its asking me for a password and has Apple in the "Name" spot.
How do I retrieve or reset the password?
It came with the upgrade of Mountain Lion but I cannot find quicktime in the applications. When I try to install anything this Installer Password thing comes up... so I'm stuck.ShirlFromNC
I think you're slightly misunderstanding something, so maybe I'll try to chime in, even though everyone has said it in various ways.
Before OSX 10.7 (aka Lion) came out, the upgrades to OSX belonged to the Mac and not the user. Probably there was a technical legality in the user agreement that you couldn't do that, but everyone did. I could sell a Mac with Snow Leopard (or anything before that) by just erasing the hard drive, and reinstalling OSX. Then ship it to the buyer. Now, I was pretty honest as a seller, and including not only the original installation discs but also any upgrade. I would only sell a Mac if I was replacing it, so I always was getting the brand new version.
With OSX 10.7, upgrading was done online, with no disks. So the upgrades were tied to an Apple ID rather than the machine. Recently, I sold a MacBook Pro (to upgrade to a 27" iMac), which came with Lion. I had promised the buyer that it would come with Mountain Lion, but I didn't know that the upgrade was tied to my Apple ID. I made good with the buyer by sending along a $20 Apple App Store card so that she could upgrade to Lion.
So what everyone is saying here is that you need the original Installation discs or Snow Leopard disk to reinstall and wipe out the Mountain Lion that is on your Mac. It doesn't belong to you, it belongs to the seller, and without his Apple ID and password, you cannot use it. Once you do a reinstall of Snow Leopard, then you can upgrade to Lion and then to Mountain Lion. I do not believe you can upgrade directly to Mountain Lion from Snow Leopard, but I'm not sure.
If the seller claimed that you were getting Mountain Lion, then he was lying to you (or being more civil, maybe he just didn't know like I did). If you bought the used machine from Amazon Sellers or from eBay, then you have recourse through the feedback system or through PayPal. If you bought it any other way, you're on your own. -
Has Apple fixed the problem with 4G cellular connection?
Has Apple fixed the problem with 4G cellular connection on the iPad 3?
Cellular connection problem was for US connection in Houston, Texas. Have an iPad 2 which functions perfectely on Wi-Fi or 3G. Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection. Purchased on with the AT &T cellular. Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all. Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all. Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service. Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's. Didn't seem to matter if it was AT&T or Verizon. So I decided that I would just return the unit and wait for Apple to fix the problem. Hence my question.
Appreciate very much your time in responding to my question. -
Has apple named the the new ipad(3rd gen ipad) ipad with retina display
Has apple named the 3 rd gen ipad ipad with retina display.
The iPad 3rd generation has a retina display, but it was sold for only a few months. The iPad 4th generation also has a retina display and some of Apple pages refer to it as iPad with retian display. However, most of us in these forums refer to the various iPads as iPad 1, iPad 2, iPad 3 or iPad 4.
Cheers, Tom -
I am getting entries which are 'all day' entries duplicated 8 to 9 times. I have updated my software on the phone to the latest version. Entries in iCal are only once. I have completely emptied my iPhone of all data. Has Apple resolved the issue yet?
Simple solution. Get a real internet service and not a cell phone internet connection service it was never meant to be used as the primary internet service
And how do you lose a home and job and be sued as you claim. What over 10 Gb of data? Give me a break
In my city small claims is $5000.00
And over that amount you can go to a superior court to have your issue settled.
http://www.bbb.org
Good Luck, Elector -
Has Apple got the new snapchat update?
Has Apple got the snapchat update, because when it says 'double tap to update' I do it and it doesn't update
I don't think the question was posed to Apple directly, diesel, and the update is live for some and not for others. So the question posed is snapchat upgrade availble for only Android users, and no iphone users. Or do some apple users have it availble and some do not. So we are not as capable of checking other apple users, other than posting this question in support.
The only person whom I've asked about it has an android and it's up and running for him.
I'm very excited for the update, so I've been online for a long time trying to figure out if it's an Apple thing, a my personal phone thing, or a snapchat thing.
I too am expecting at least an apology from Snapchat. -
Has anybody lost the ability to scroll in Mail? Other apps scroll just fine.
Has anybody lost the ability to scroll in Mail? Other apps scroll just fine. Mail did too, before Mavericks.
Primary,
I have shot tethered in 4.1 and planned to do so in 4.2. Which 5D do you have? The first one? FF but 12Megapixels? My 5D's are a Mk2 and Mk3, but only the 5DMk2 was supported in LR4.1.
Very strange that no one has replied with a setting to check. Please write back here if you found out what happened.
jonathan7007 -
Does Apple have the ability to Wipe Clean an iPhone after its been stolen ?
No. This can only be done by you, and only if you have enabled Find My iPhone before it was stolen. If it was you may be able to remotely wipe it if it's online. See http://osxdaily.com/2012/06/05/remote-wipe-iphone-or-ipad/.
-
It appears that Maverick has banishd the ability to highlight, in color, file folder names, replacing the color highlight band with a hard-to-see color dot. Is there a way to get the color-band highlight ability to operate?
Welcome to Apple Support Communities
Apple has replaced that feature in OS X Mavericks by color tags, so you cannot get it back. The only thing you can do is to send feedback to Apple about it, so they will think about including it in future OS X versions > http://www.apple.com/feedback -
[NEW] [IMAGES] Adding the ability to preview/live edit the source code.
If the Muse Team added this, they could relax and not worry about adding so many other features.
Sure, you can do this already in your browser. But it's not really a dynamically edit thing.
Here, let me demonstrate.
You could naviagate (or shortcut) to a new button, as you can see below.
Once clicked you will get a dialog to choose preset program, open your own, or exit.
As you can see above, if the user does not have Dreamweaver, it will be greyed out.
You could probably guess what the dreamweaver would look like, but the muse editor may look like this.
Maybe even some html tags in button form
Of course, it would have content in it, including the <html> structure, including <head> and <body>
Why add this? Well...
Since Adobe Muse doesn't support all the features of the internet, you can easily add it here yourself! Until they add a button of course.
Then the Muse Team won't be so rushed to get all these features out.
Really hope they add this.
Also, they could touchup and make it look nicer, I just did some quick photoshop.
Note: We kind of have this already, though we can only edit the header... sort of...
This could be already done by exporting the html, opening it in a text editor, editing the code, somehow adding it back to muse, and realizing that you forgot some code, repeat.
But that is too long of a process, this request is much easier.Most Segregation of Duties (SOD) functionality has been moved to AACG. From my understanding AACG's job is to handle SOD across platforms (EBS, PeopleSoft, HFM, etc.), the visualization was probably moved to the AACG product and that's why it's no longer in the PCG product. Out of the box AACG can connect to EBS and Peoplesoft, you can build connectors for other platforms to manage SOD controls across these different systems. Because AACG is no longer an "EBS only" product, I believe the need to use AACG for all approvals/SOD functionality is required.
Think of AACG as your SOD workbench, where you can simulate SOD access, model controls, create controls, remediate incidents, etc. Between LogicalApps (5+ years old) and the new Oracle GRC products, there has been some migration of features to newer products.
Don't forget, If you feel you need a feature in a certain product (even if it has moved), you always have the ability to request it via My Oracle Support. I hope that has helped in understanding what direction the products have taken. -
How to add the ability to put EL expressions in Navigation Rules
I had a need to dynamically determine what page to return to in a JSF application. There has to be an easier way, but here's how I wanted to do it. I wanted to put an EL expression in my <to-view-id> nav rules in the JSF config file (e.g. faces-config.xml). This isn't allowed. So I built my own custom ViewHandler to do it.
1) Define the ViewHandler in faces-config.xml:
<application>
<view-handler>com.msd.tts.pluggable.MyDynamicViewHandler</view-handler>
</application>2) Create the class:
package com.msd.tts.pluggable;
import java.io.IOException;
import java.util.Locale;
import javax.faces.*;
import javax.faces.application.ViewHandler;
import javax.faces.component.UIViewRoot;
import javax.faces.context.*;
import javax.faces.el.ValueBinding;
import com.sun.faces.util.Util;
* Adds ability to put EL expressions in the <to-view-id> Navigation Rules in JSF
* configuration file (faces-config.xml).
* @author Craig Peters
* @version 1.0
public class MyDynamicViewHandler extends ViewHandler {
* The original handler we are customizing.
private ViewHandler prevHandler = null;
/** Creates a new instance of MappingViewHandler. By including
* a parameter of the same type, we encourage the JSF framework
* to pass a reference of the previously used ViewHandler. This way
* we can use all the previous functionality and override only the
* method we are interested in (in this case, the getActionURL() method).
public MyDynamicViewHandler(ViewHandler prevHandler) {
this.prevHandler = prevHandler;
@Override
public String getActionURL(FacesContext context, String viewId) {
return prevHandler.getActionURL(context, viewId);
@Override
public Locale calculateLocale(FacesContext context) {
return prevHandler.calculateLocale(context);
@Override
public String calculateRenderKitId(FacesContext context) {
return prevHandler.calculateRenderKitId(context);
@Override
public UIViewRoot createView(FacesContext context, String viewId) {
return prevHandler.createView(context, viewId);
@Override
public String getResourceURL(FacesContext context, String path) {
return prevHandler.getResourceURL(context, path);
@Override
public void renderView(FacesContext context, UIViewRoot viewToRender)
throws IOException, FacesException {
String result = viewToRender.getViewId();
if (Util.isVBExpression(viewToRender.getViewId())) {
ValueBinding vb = context.getApplication().createValueBinding(viewToRender.getViewId());
result = vb.getValue(context).toString();
if (result.charAt(0) != '/')
throw new IllegalArgumentException("Illegal view ID " + result + ". The ID must begin with '/'");
viewToRender.setViewId(result);
prevHandler.renderView(context, viewToRender);
@Override
public UIViewRoot restoreView(FacesContext context, String viewId) {
return prevHandler.restoreView(context, viewId);
@Override
public void writeState(FacesContext context) throws IOException {
prevHandler.writeState(context);
}3) Use EL in navigation rules:
<navigation-rule>
<from-view-id>/CommonForm.jsp</from-view-id>
<navigation-case>
<to-view-id>#{bean.caller}</to-view-id>
</navigation-case>
</navigation-rule>The "bean.caller" method will have saved the page to go back to.
Comments are welcome. I just didn't see any other way to dynamically go back to an arbitrary page.
Thanks.CraigRPeters wrote:
Comments are welcome.Nice stuff. But that means that navigation is hardwired in the backing bean instead of faces-config.xml. Forget this comment if you've maintained a propertiesfile/configurationfile for that.
I just didn't see any other way to dynamically go back to an arbitrary page.You can declare more than one from-outcome and/or from-action for one from-view-id.
Maybe you are looking for
-
Hi Gurus I want to change the description of the "Search: Service Order" view which is visible from the WEB UI. I would have thought modifying the Logical Link would have made this possible. Is this only possible via Custom Code? If so where must I m
-
I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?
-
HT5899 Keywords missing in iMovie X. BRING THEM BACK!
This is either a terrible bug or a BAD decision by Apple. All you can do is view tags applied to videos in the previous version. http://support.apple.com/kb/HT5899?viewlocale=en_US&locale=en_US Please hit Apple's feedback page and let them know we ne
-
How can i show pdf in my web application?
if the pdf (or else) file is under web content folder is simple, i can make a link to the resource, but if is it out of the .war file i deployed?? I know I set a outside folder in web server classpath, so i can get URL and then the InputStream from t
-
Material Ledger Value Flow Monitor CKMVFM question
Hello, I am researching the Value Flow Monitor report CKMVFM. On my test material, it is showing a balance in FI, and a red indicator on the FI/ML status. I assume this means there is a discrepancy between FI and Material Ledger, but I don't know h