Has Apple ever fixed the fan issue that results from upgrading the hard drives on 2009-2010 iMacs?
Has Apple ever fixed the fan issue that results from upgrading the hard drives on 2009-2010 iMacs?
My CPU fan defaults to 3000RPM. I can rev the fan higher with 3rd party Fan controllers, but no lower than 3K.
OR you can short out the original temp sensor, to make the fans rev at quieter speeds.
You can also install an optical temp sensor in place of the old one, it will still read temps and adjust the fans accordingly, just not as good as an internal sensor.
Use something like this:http://www.ebay.com/itm/New-922-9229-Cable-Temp-Sensor-Optical-iMac-27-inch-Late -2009-2010-/111106349896
Another fan speed control app you may be interested in: http://exirion.net/ssdfanctrl/
Good Luck!
Similar Messages
-
Revision: 4859
Author: [email protected]
Date: 2009-02-05 10:15:22 -0800 (Thu, 05 Feb 2009)
Log Message:
-Fix packaging timing issue that was caused by the rebuilding of the air applicationupdater. The recompiled files would get laid down properly only to have the old files put back down on top of them. I also made sure the build directory was removed after updateAIR ran so it would not be included in the package
-removed bundles.properties from the wireframe project
bug:SDK-19128
qa:yes
doc:no
checkintests:pass
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19128
Modified Paths:
flex/sdk/branches/i10/build.xml
flex/sdk/branches/i10/frameworks/build.xml
Removed Paths:
flex/sdk/branches/i10/frameworks/projects/wireframe/bundles.propertiesHi Chris,
I have confirmed this is an AIR SDK 13.0.0.83 bug.
I have reported this bug to Adobe Bugbase, and I also included the workaround:
https://bugbase.adobe.com/index.cfm?event=bug&id=3750892
The workaround is:
Simply comment the <externalSwfs> tag in your -app.xml will solve this bug, like this: <!-- <externalSwfs></externalSwfs> -->
DarkStone
2014-04-28 -
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
i created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song and i dont want to have to add all my music again, is there anyway of changing the location to a new folder all at once? for example, if it is my computer/harddrive/music/.... can i change it to mydocuments/musis/...
and having the exact same music folder so all the further directions are accurate?
thanks
please i need helppass the music on your external hard drive to the computer then drag the to Itunes
-
Photos on my Mac show the wrong date when imported from a portable Hard Drive
I’ve got loads of photos that I had imported from my old PC.Last night I decided to start going through them and trying to get them sorted
prior to importing into iphoto. I discovered that some of the pictures (in particular ones I have taken from my old Iphone) all had the same date and time
assigned to them. When I checked the Exif details, it listed the correct camera etc, but the date created seems to have changed to the date I copied them to my portable hard drive.
I thought this was strange as when they were on my PC I thought they were correct. I booted my PC up and checked the portable hard drive on Windows. When viewed on my PC the pictures all have the correct time and date assigned to them. However when I plug the same portable hard drive into my Mac the same files show up as being created on a more recent date (say 20th Jan 2013).
I’ve done a lot of research last night, although I can find no forum with this exact problem, I feel it must have something to do with compatibility. The portable hard drive is FAT32, and I am assuming that in order to ensure all of the photos information is transferred correctly in needs to be NTFS.
The problem I have is how do I transfer my files again from my PC to an NTFS drive, whilst keeping all of the correct date and time information assigned to the photos. My understanding is that the 2 aren’t compatible.
Has anyone ever had this problem? It mainly seems to be with photos I have extracted from my Iphone or edited in some form by rotating them.
I have a 13" Macbook Pro Retina with OSX Mavericks installed.What you may want to do is archive as a Zipfile the photos and then transfer them to the Mac. It is possible some of the metadata is being lost on the FAT32 formatting. USB Flashdrive might work better than a FAT32 formatted hard drive, as I do know that most USB Flashdrives are formatted about the same as SD media cards, which manage to preserve the data when copied from camera to Mac. My big question is, do you still have the photos on media cards? You might just want to get a media card reader on your Mac, if the photos are not on SD cards, and transfer them over with the media card reader.
I do believe Retina MacBook Pros all have SD card readers built-in.
Note: I've asked this be moved to the MacBook Pro forum. MacBook without the secondary name refers to the consumer notebook Apple stopped making in 2011. -
My laptop got pinched and I bought a used Mac Book Pro, put a larger hard drive in it and performed a clean install of Snow Leopard on the new drive, after which I used the Migration Assistant to bring over my applications, settings, documents, etc., from my backup hard drive. This hard drivekis not a Ti e Machine drive, it's one I use to clone my computer to regularly with Carbon Copy Cloner. When the migration was complete all my documents, the desktop,and other folders are locked and won't allow me to access them. What to do? Thanks for the help.
Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
i no longer have any of my songs, ringtones, apps, photos etc, on my macbook anymore due to a SSD upgrade. i did not want to back up any files from the old hard drive as some were corrupt and i did not want that to transfer over to my new hard drive so i started from fresh. what i would like to know is, if i now sync my iphone with itunes, am i going to lose all the content on my iphone because there is nothing to sync it with or, will it transfer all the files onto my computer and i will have them again? or is there a way to do that before i sync and lose everything i have gained on the phone?
ddurval73 wrote:
I'm afraid I'm gonna lose all my music on my Iphone when I unlock it. I have over 4,000 songs in it and they are not backed up on my itunes library (I know, big mistake. I was trying to save space on my hard drive.). Please tell me I won't lose my songs or if I do how do I transfer them back to the Itunes? Is there a good software that can do that hassle free?
Thanks
It's called "iTunes". Connect the phone, but do not sync, when it appears in iTunes choose "transfer purchases..." from the iTunes File menu. -
I cannot seem to migrate the full time machine backup from an external hard drive back to the new hard drive. Finder sees the drive and files. When I use Migration managers, it only sees the computer hard drive after I select the time machine option to restore the files.
Welcome to the Apple Support Communities
With what OS X version did you make the backup? If it was the same as the version you are using now, you don't have to use Migration Assistant to restore the backup. Instead, there's a safer and better method, but you will lose all the changes you have made since the last time you made the backup.
Just hold Command and R keys while your Mac is starting to start into OS X Recovery. Then, select the option to restore a Time Machine backup, and follow its steps. Also, you will be able to select the backup you want to restore -
Im having an issue importing music from my external hard drive to i tunes. i imported my whole collection but can only play them when I have the external drive connected to my pc...
See > iPhoto: How to move the Library folder to a new location
If you moved your iPhoto Library correctly and then double-click the iPhoto Library icon in the new location, it should open iPhoto and remember the new location. -
I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?
Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath -
My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?
Reset the device by pressing and holding the home and power buttons for about 15-20 seconds.
-
i need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user
Sorry.
The iPhone is of no use until/unless the previous owner removes it from their account.
You will need to find the prior owner or return the iPhone. -
HT4623 Do I need to update my iphone4 because of the security issue that has been published lately?
Do I need to update my iphone4 because of the security issue that has been published lately?
Your profile shows you have a 4S with 7.0.6. That is the most current update. Do you also have a 4 that you haven't updated? If so, you should update it too.
-
I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc
I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc
-
The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse. The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?
Perhaps, I was not clear enough.
I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
Recently, I just purchased a macbook pro retina with Mountain Lion
On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
I am truly surprised that no one has noticed this MAJOR issue.
Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
In fact almost all of the trackpad functions have been selected.
Maybe you are looking for
-
Internal microphone not working with Windows 7 Enterprise on dx6650
Hi. I recently upgraded my HP Pavilion dx6650 to Windows 7 Enterprise (final version, non beta). Everything worked fine but the internal microphone that is not working.Thank you in advance.
-
Qosmio X305 - Can I use the AC adapter in Europe?
I just bought the model listed above from the USA and I am from Europe. I am not a tech person and would like to ask a simple question please. It says it has AC Adapter 180W (19V x 9.5A) 100-240V AC Adapter Does it mean that it will switch automatica
-
How to use value from Custom Select tag
Hi, I have made a custom tag for html element select. It is a very basic tag with the selection of one vaule. I am able to populate the list using custom tag in JSP but i am not able to optain the value from that. Kindly see my jsp code. <html> <head
-
11gR2 Grid Infrastructure and 11gR2 RAC install as separate users (RH 5)
We are about to set up a few new RH 5 clusters and are trying to make a decision if we should install 11gR2 Grid Infrastructure and 11gR2 RAC as the same user (oracle) or as separate users (grid and oracle) as per Oracle documentation. I would like t
-
Recreate Standby using full datafile backup
Dear All, I have to recreate my standby database due to huge archive gap. I have full datafile backup of primary. Pls help me. Thank you