Has Apple fixed the problem with 4G cellular connection?

Has Apple fixed the problem with 4G cellular connection on the iPad 3?

Cellular connection problem was for US connection in Houston, Texas. Have an iPad 2 which functions perfectely on Wi-Fi or 3G. Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection. Purchased on with the AT &T cellular. Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all. Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all. Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service. Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's. Didn't seem to matter if it was AT&T or Verizon. So I decided that I would just return the unit and wait for Apple to fix the problem. Hence my question.
Appreciate very much your time in responding to my question.

Similar Messages

Has Apple resolved the problems with the 23" display?

I want to buy a 23" cinema display but the color problem (pinkish hue) seems to still exist. Has Apple still not resolved this problem?
If this is the case, I'll buy the 20" display which I believe does not have any problems. Can someone confirm this?

There has not been any indication from Apple that any chnages have been made in the displays other than price cuts. There were some minor spec changes (which were "un-announced") but nothing about the panels or the many issues that have been discussed here since the introduction of these units.

Did apple fix the problems with 2.0.1 on 2.0.2?

I'm still stuck with 1.1.4 and I havent upgraded it to 2.0.1 because alot of people were having problems with it, but did 2.0.2 fix any problems or should I wait some more until FU#KING APPLE does something to fix those problems?

i guess im lucky.....all updates have worked great for me...this last one took a while, but went smoothly...everthing works fine

HT1222 Has Apple acknowledged the problems with Security Update 2012-001?

I've read a multitude of user forum comments about this update breaking user software, but have not found a single comment by an Apple representative.

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

Has apple addressed the problems with iCloud and iCal?

I can see there have been lots of complaints about iCal errors in trying to sync on icloud. I'm not finding any solutions to the issues that are clearly affecting a lot of people. Any one know what's going on?

final cut pro 4.5 and final cut express 3 both seem to have the same dropped frames/capture issue once you upgrade to 10.4.9, something to do with spotlight.
try this out -
http://discussions.apple.com/thread.jspa?threadID=929465&tstart=15

When will Apple fix the problem with Freezing from the new upgrade??

I've had it.
Everytime I try to burn or back up my iTunes songs the whole program locks up as soon as I click on any of the brun or back up icons. Haven't been able to find any answers to solve my problem here although Apples tech support insists on looking here. Come on Apple what gives??

No one here would know that. An announcement would need to come from Apple.

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig?

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig? IPConfig /flushdns doesn't help at all. Until they fix it I will be previewing and buying my songs thru Amazon.

Doublechecking ... do you still get that if you update to iTunes 10.6.3.25 (just released today)?
http://www.apple.com/itunes/download/

Has Apple fixed the audio encoding problem?

As many other people seems to have experienced before me, iDVD6 stops working when encoding audio. Everything works before that step but when it reaches the "Audio Encoding" sequence iDVD stops working. Did Apple fix the problem? What else can we do?
Thanks for any reply.
Frank
iMac G5 Mac OS X (10.4.5) PowerMac G4

I followed your advice and restarted at 6:00 pm last night - this morning it was still going on - over 13 hours! The funny thing this time is that I got the 'rainbow ball' encoding audio at the beginning of the 3rd step, 'Processing movie' after only 1-1/2 hour. The last time I burned the same project, I got the 'rainbow ball' encoding audio message at the end of the 3rd step - in other words, it had processed the entire movie (which took 6 hours) and then began the encoding audio phase. I'm letting it run while I'm at work, but do you think there might be something else going on?
Here are some facts which apply to both times that I have tried burning the DVD project:
1. I have iMovie project (26Gb) on my external drive with about 15 Gb available space
2. and the iDVD project is on the internal hard drive with about 50 Gb of available space
The reason I moved the iMovie project to the external drive was because I would have only had about 24 Gb of available space if I left it on the internal drive (less than the movie itself).
Which drive is doing all the encoding and needing the most space - the internal or the external? I was assuming it was the internal drive. Should I move the iMovie project back to my internal drive and start over?
Thanks again - I'm a new member of this site and so far, it has been very helpful and informative!

Hey Apple when are you going to fix the problems with IOS 8.3??

Hey Apple when are you going to fix the problems with IOS 8.3??
Message is working weird.
I don't have internet service when I'm away from my WiFi, because my phone won't use LTE now.
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
If there's a fix coming when will we see it?
(I'm using iPhone6 plus)
I've tried everything else to fix the problems I'm having. Soft restart. Hard restart. Used your chat line. Called Verizon. Reset network settings.... Help!!!!!
I've posted on the Apple Communities about all this and I've sent in a couple of bug reports.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!

I have a Verizon iPhone 6 and am having none of those problems.
SueMac wrote:
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
Didn't they already have you do that? If you haven't, yes, you should restore your phone as new and test.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!
If you are in a situation where you may need emergency information, organizations such as the Red Cross recommend things like this:
http://www.amazon.com/Epica-Emergency-Digital-Flashlight-Certified/dp/B00CZDT30S /ref=sr_1_1?ie=UTF8&qid=1429463666&sr=8-…

ITunes needs to fix the problem with there gift cards not being activated this is not up to the retailer and they will not return scratched coded cards! There is thousands of people having this problem please fix it

iTunes needs to fix the problem with there iTunes cards not activating properly! This is not the retailers fault and they will not return iTunes cards that have had the code area scratched there for apple needs to credit and or activated the cards there is thousands of people having this problem please bite the bullet and fix it already I will not be using iTunes until this is corrected...

If you haven't received the item then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- Try the remaining items of:
iOS: Troubleshooting applications purchased from the App Store

WHEN or HOW to fix the problem with Thunderbolt/Side screen problems

WHEN or HOW to fix the problem with Thunderbolt/Side screen problems (Cinema screen). Keeps blinking on & off then eventually completely off. Would have thought Apple would have fixed the problem by now as it is apparently to do with the Thunderbolt connector!.

Hello, might it be Video card related?
See if yours is on the recall list...
iMac (27in): AMD Radeon 6970M Video Card Replacement Program (del 'mid 2011')
http://xlr8yourmac.com/
http://support.apple.com/kb/TS5167?

Do i need a new drive or should apple fix the problem!

since i upgraded to osx lion i keep getting an error code 0x80020022 every time i try and burn a dvd doesn't matter what type of program i use the some results error code.. 0x80020022 . does this mean a new drive is needed ?.. or bearing in mine it worked perfectly before lion was in stalled should apple fix the problem?
i wish i hadn't bothered with lion..
reading though this discussion forum this problem seems to be happening to others... so why it seems is apple ignoring it ?....
now if i need a new drive because of this upgrade why didn't apple say your optical drive may need to be upgraded to work with lion before i started ...
i was quite happy with snow leopard...
i mean apple do say keep your machine up to date ..do they not!
terry dissapointed
in the UK.

Restore your bootable backup/clone or Time Machine of your previous Snow Leopard installation and see if the problem persists.

IOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings

iOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings via a Configuration Profile. Has anyone else got the same issue? Are Mac users got this issue?

This seems to be working for me now but will keep monitoring it the next couple of times I use it to make sure its not a one time thing

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

Thanks for your note. My tech dept could not come up with any explanation for the dictation tool not working. We have about 1,000 employees in our office - I think I will send an all employee message to see if anyone else has the issue.

Has Apple fixed the problem with 4G cellular connection?

Similar Messages

Maybe you are looking for