Has been passed already
Hello Experts,
Is there a possibility to change or edit the Purchase requisition if it has been passed already from EBP to R/3 ?
Regards
ilhan
Maybe I misunderstood your question. Once the S/C has created a Purchasing document in the back-end system, you cannot change the S/C and subsequently update the Purchasing document. You can go into the back-end system and revise the Purchasing document, but the change will not be reflected in the S/C.
I hope this clears up the misunderstanding.
Regards, Dean.
Similar Messages
-
So how to explain this as best as possible....
First off, I have seen this "issue" since ConfigMgr 2012 RTM and I have seen it continuously through the various upgrades done on the way to ConfigMgr 2012 R2. The environment consists of a single AD domain, one ConfigMgr Primary site with 30 DP's
and 1500 computers.
Application B is created and it should supersede application A. The application is present on all computers throughout the environment. The application is distributed to all DP's. The deployment of application A is targeted to a collection containing all
computers. Then the deployment of application A is deleted. Application B is then configured to supersede application A with an uninstall of application A and the deployment type is replaced with the deployment type of application B. The option that Allows
users to see older deployment types is not selected. Now application B is deployed to the same collection as application A was. The deployment settings are configured with a deadline date in the future (to match the corporate maintenance window - not a ConfigMgr
maintenance window), but the application should be visible for users who want to upgrade before the deadline is reached. The option of automatically upgrading any superseded versions of the application is selected. The deployment is not created as a required
deployment, but only available.
What happens after the above is done is a bit odd. If I compare a application deployment that is superseded, to the Software Updates that normally have the same psychological effect on users (for anyone in IT this is common knowledge to be: Postpone and
don't bug me again until deadline has passed and then becomes a forced installation/update, for about 70% of the user mass) this is not the case. After about 24 hours about every single computer that is online has received the deployment of application B and
has been successfully installed. I refuse to believe that close to a 100% of the users actually select the option to upgrade application B before the deadline has been passed.
I have checked the above and it looks like it does not honor the deadline given and finds out that when it can kick of the deployment, it does.
This also happens if I don't delete the deployment of application A and leave it deployed to the same collection as the superseding application B is deployed to.
Any ideas on why I'm seeing this behavior would be greatly appriciated.
/Tom ErikWell, it's an available deployment. The only thing that it should do is to upgrade the superseded application, if present on the computer and that is set to be performed several weeks in the future. In the particular example (log files) below, the deadline
is set to be on 1 April 2015 (!). All deployments are set to use client local time, when deployed to a computer collection. All other user (if I remember correct) deployments are set to use UTC, as client local time is not an option.
What I do see on a particular computer is that when no user was logged on, the deployment started the application installation. This is what I found in the AppEnforce.log (notice the time stamp around the 18th at 13:42):
+++ Starting Uninstall enforcement for App DT "Install Microsoft Office 2010 w/SP2 - x86 - Windows Installer (*.msi file)" ApplicationDeliveryType - ScopeId_5A0DA406-A98B-4302-9061-7A14FC9FCC1E/DeploymentType_7edd6b29-eb40-4019-a0c6-04da65e3407a, Revision - 4, ContentPath - C:\WINDOWS\ccmcache\o1, Execution Context - System AppEnforce 18.02.2014 13:42:20 1164 (0x048C)
A user is not logged on to the system. AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
Performing detection of app deployment type Install Microsoft Office 2010 w/SP2 - x86 - Windows Installer (*.msi file)(ScopeId_5A0DA406-A98B-4302-9061-7A14FC9FCC1E/DeploymentType_7edd6b29-eb40-4019-a0c6-04da65e3407a, revision 4) for system. AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
+++ Discovered application [AppDT Id: ScopeId_5A0DA406-A98B-4302-9061-7A14FC9FCC1E/DeploymentType_7edd6b29-eb40-4019-a0c6-04da65e3407a, Revision: 4] AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
App enforcement environment:
Context: Machine
Command line: setup.exe /uninstall ProPlus /config uninstall_config.xml
Allow user interaction: No
UI mode: 0
User token: null
Session Id: 4294967295
Content path: C:\WINDOWS\ccmcache\o1
Working directory: AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
Prepared working directory: C:\WINDOWS\ccmcache\o1 AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
Prepared command line: "C:\WINDOWS\ccmcache\o1\setup.exe" /uninstall ProPlus /config uninstall_config.xml AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Executing Command line: "C:\WINDOWS\ccmcache\o1\setup.exe" /uninstall ProPlus /config uninstall_config.xml with system context AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Working directory C:\WINDOWS\ccmcache\o1 AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Post install behavior is BasedOnExitCode AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Waiting for process 5108 to finish. Timeout = 120 minutes. AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Process 5108 terminated with exitcode: 3010 AppEnforce 18.02.2014 13:51:27 1164 (0x048C)
Looking for exit code 3010 in exit codes table... AppEnforce 18.02.2014 13:51:27 1164 (0x048C)
Matched exit code 3010 to a PendingSoftReboot entry in exit codes table. AppEnforce 18.02.2014 13:51:27 1164 (0x048C)
++++++ App enforcement completed (547 seconds) for App DT "Install Microsoft Office 2010 w/SP2 - x86 - Windows Installer (*.msi file)" [ScopeId_5A0DA406-A98B-4302-9061-7A14FC9FCC1E/DeploymentType_7edd6b29-eb40-4019-a0c6-04da65e3407a], Revision: 4, User SID: ] ++++++ AppEnforce 18.02.2014 13:51:27 1164 (0x048C)
And this kind of corresponds with what I can see in the ServiceWindowManager.log (again, notice the timestamp at 13:42):
OnIsServiceWindowAvailable called with: Runtime:1, Type:6 ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
Biggest Active Service Window for Type=6 not found ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
Program cannot Run! Setting *canProgramRun to FALSE ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
WillProgramRun called with: Runtime:1, Type:6 ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
A Service Window of this type exists. ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
There exists a Service Window of this Type, for this duration. The Program will run eventually. ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 13:42:17 5504 (0x1580)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 13:42:17 5504 (0x1580)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 13:42:19 3396 (0x0D44)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 13:42:19 3396 (0x0D44)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 13:51:27 5704 (0x1648)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 13:51:27 5704 (0x1648)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 13:51:28 756 (0x02F4)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 13:51:28 756 (0x02F4)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 14:03:52 5060 (0x13C4)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 14:03:52 5060 (0x13C4)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 14:03:52 6096 (0x17D0)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 14:03:52 6096 (0x17D0)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 14:04:12 4192 (0x1060)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 14:04:12 4192 (0x1060)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 14:04:14 5828 (0x16C4)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 14:04:14 5828 (0x16C4)
There are no maintenance windows configured in ConfigMgr at all for any collections.
/Tom Erik -
If I have an email as an alternate email on my account how can i make is my new appleID without it saying that it has been used already?
Carole,
If it talks about your password it is probably a scam.
Take a look in your purchase history and see if there has really been a purchase.
Also you can refer to this document: Identifying fraudulent "phishing" email -
Illegal access: this web application instance has been stopped already
Illegal access: this web application instance has been stopped already. Could gineConfigurationFactory. The eventual following stack trace is caused by an er o attempt to terminate the thread which caused the illegal access, and has no fu
step..........5
java.lang.NullPointerException
[Loaded org.apache.jsp.response_jsp from
i found this error can any one help me about this
Message was edited by:
vijay_kumar_choyalExcuse me, but the information you provided does not make sense.
Take a look here: http://jspwiki.org/wiki/StupidQuestions
(I'm serious, there's an explanation for your problem)
Greez
Jens -
Im trying to get some purchased songs to sync onto my ipad, but when i try it says they could not be synced as i need to authorise my computer which has been done already but its still not syncing them can someone help please?
Hello there, Gemss.
The following Knowledge Base article offers up some great recommendations for the issue you're describing:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Although all of the scenarios may be applicable, many folks find that the following section helps resolve their issue most often:
Authorize using the correct account name
The items you're trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
Select a purchased song in your library and choose File > Get Info.
Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you'll need to use when authorizing your computer to play this purchase.
Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
No XCM application configuration has been passed
Hi,
We are configuring ISA in ECC 5.0(ERP).
When trying the URL http://<host>:<port>/shopadmin/shopadmin/init.do we are getting a message "ISA Framework: Internal Error No XCM application configuration has been passed and there is no default XCM application configuration defined. Check XCM configuration".
Please help us regaring this.
Thanks,HI,
Go to your XCM page for B2B application - http://<host>:port/b2b/admin/xcm/init.do and activate Application Configuration in Application Configuration => Customer,
Hope this helps,
Regards,
Mike -
This code has been redeemed already
I reciently purchased a movie and used a redeeming code to download the movie into to mu Itunes library. But I am faced with the phrase above "this code has been redeemed already" what can I do to get my digital copy?
v/r
RebeccaHello Rebecca,
Thank you for the details of the issue you are experiencing with your digital copy. I recommend checking your list of past purchases to download the movie from there:
Download previous iTunes Store purchases to an authorized computer
Click iTunes Store near the top of the iTunes window.
Click the Purchased link at the right of the iTunes Store homepage (below Quick Links).
In the page that appears, select a category.
iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download. If you select Music, you can view your purchases by song, artist, or album. If you’re viewing by album, click an album to see which songs on it are available for downloading.
To download all available items, click Download All.
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
I recommend continuing with the following article if the issue persists:
If you can't redeem your iTunes Gift Card or code
http://support.apple.com/kb/HT6021
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Firefox doesn't show/display/load my addressbook within my hotmail account anymore, it worked previously well, so has nothing to do with the change from hotmail to outlook. Since a week or so, I realized a slowness in loading my recently used addresses with opening a new e-mail, but it was still working from time to time. For a few days, it has been stopped working, complete addressbook doesn't load anymore, just displays the load circle in the middle of the screen, apart from that I have only a white page. Cache and Cookies already emptied/deleted, result is the same. No settings have been changed, but have the same issue with Internet Explorer, but it's working with Chrome. For testing, I deactivated my firewall and anti virus (Comodo), but the result was still the same. I would appreciate if I could get it working again here. Every suggestion is welcome here
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Do a malware check with some malware scanning programs on the Windows computer.<br />
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
HT4413 Migration Assistant for a brand new mac that has been used already?
My dad bought a Mini but has been using it for a few months but didn't transfer anything from his old Mac. All his address book entries and files are still on his original Mac. Can Migration Assistant still be of help to transfer over the data without erasing what he's accumlated on his new Mac? Is it going to write over his email for instance?
Thanks!Migration Assistant is not the tool you need to use at this point. Instead you should manually copy the data you want from the old computer to the new computer. If both computers have Firewire ports then use Target Disk Mode - Transferring files between two computers using FireWire. Boot the old computer into TDM and the new computer normally. You should then find a disk icon for the old computer's drive on the Desktop of the new computer.
Before you do any of the described file copying below be sure you have quit Mail and Address Book if they are now open except where directed.
For Mail you open Mail and select Import from the File menu. Check the top option to import from Apple Mail. Navigate on the old computer to its /Users/username/Library/Mail/ folder and then locate a folder named "Mailboxes." Select the folder and click on the Open button. Select the mailboxes you want to import and click on the Import/OK button. This will import the old mail to a new set of mailboxes in Mail under a mailbox named Imported. You can then move the old mail to wherever you want in Mail.
For contacts locate the /Users/username/Library/Applications Support/AddressBook/ folder. Copy the entire folder to the new computer to the same location on the new computer.
Last, navigate to the /Users/username/Library/Preferences/ folder and copy these preference files: com.apple.mail.plist and all beginning with com.apple.AddressBook. Copy them to the same location on the new computer. -
So it has been a couple months now since I last cleaned up my bookmarks toolbar. And I could remember a couple of bookmarks tabs I wish I did not delete. I found some articles saying I could try restoring previous versions of my bookmarks from the dates of recent system restore points. But the earliest date I found was of only last week's. I've checked everywhere in my Firefox profile for anything that I could restore to date back into that time, but they too only tracked back as early as last week. I believe the automatic backups Firefox had made during that time has now long been deleted from the system in order to make room for my most current ones. How am I going to be able to retrieve those bookmarks when their aren't any backups available now to restore from?
If you do not have backups of your bookmarks, either in the bookmarkbackups folder or saved elsewhere, then you can't restore your bookmarks.
For future prevention: http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
Itunes says my digital copy code has been used already.
Got star trek for blu-ray. It came with a digital copy and a redeem code. However when I entered it on the redeem page in itunes a red message appears telling me the code has been used once and can not be used again. The code is from a fully sealed new copy of teh blu-ray. What should I do? (yeah I know I can just handbrake it but the gift giver was excited about this functionality so I'd like to use it).
Just wanted to jump in here with a quick update. We are still investigating this issue, but I can assure everyone that if they contact support via the website at http://www.paramountdigitalcopy.com/support/, they will receive a new code for their digital copy of Star Trek for iTunes or Windows Media. However our support team has been very backed up because of the holidays so if you don't get a reply right away, don't panic. We will get to you.
I have done numerous Web searches for any sign of files available via BitTorrent or other P2P networks that contain working Star Trek digital copy codes, but apart from sites that exploit Google's search engine and generate phony "search results" of their own, I have not had any luck. It is possible this is just an Internet rumor, but we are still checking.
Please respond to me in this thread with info on which version of the Star Trek set you got that has this issue, so we can narrow the field of possible causes. If you could also throw in any more info about that supposed torrent file (i.e. my brother downloaded it and it has a bunch of codes, etc), please do so.
Many thanks!
Stephen Zupan
Software Quality & Release Engineer
Deluxe Digital Studios
Message was edited by: Zoopster -
HHow do you recover an app that has been deleted.?
I've asked this thread be moved to the iPad forum. iPads can't run Classic operating systems:
Using iPad -
Hi my uncle is death been 1 month. Now I want to unlock his phone from my Apple ID find my I phone. So pls tell me how I could be unlock his find my I phone.
iPhone: Troubleshooting activation issues - http://support.apple.com/kb/TS3424
iCloud: Find My iPhone Activation Lock in iOS 7 - With iOS 7, Find My iPhone includes a new feature called Activation Lock, which is designed to prevent anyone else from using your iPhone, iPad, or iPod touch if you ever lose it. With Activation Lock, your Apple ID and password will be required before anyone can:
Turn off Find My iPhone on your device
Erase your device
Reactivate and use your device
If the phone has an activation lock you must have the user ID and password or the phone is useless to you. -
How do I use a gift card when it says it has been redeemed already when I know it hasn't?
I just bought a new iphone and tried to load a brand enew gift card that was a present for Christmas. Whn I tried to redeem it, it said that it had already been redeemed. I scratched the label off the code myself.
The same thing happened to me and I keep getting placed on hold! My time is very expensive! And have already been place on hold a totoal of 12 hours! With still no answeres! I just want it credited directly! I will never ever buy anything from Apple ever again!! Switching to Verizon if they don't help me! Tired of all the ******** that they have put me under! And have not seen one happy customer that has actually been helped in this form! Makes me wonder!
-
This morning it started again.
When I write the word "shut" to console it says:
kernel[0] Previous shutdown cause: 0
locationd[55] locationd was started after an unclean shutdown
kernel[0] Previous shutdown cause: -128
locationd[55] locationd was started after an unclean shutdown
locationd[54] locationd was started after an unclean shutdown
kernel[0] Previous shutdown cause: 3
Yosemite is installed. But the problem has happened with every operating systems.
Disk utility can't find any problems.
No usb or other devices are connected.
I deleted the file: com.apple.PowerManagement.plist (someone suggested that it may help)
I think it's not the matter of heat, because the problem occurs right away when starting my comp.
With a safe mode it sometimes stays up for hours. So could it be a problem with applications, rather than hardware?
Help is highly appreciated!
Thank you!Thank you, I did ran etrecheck.
Here's the result.
Now my computer did shuts down even in safe mode, sometimes in seconds.
So I have to keep this short.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011)
iMac - model: iMac12,2
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
Empty
BANK 1/DIMM1
Empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:2:47
Disk Information: ℹ️
ST2000DM001-1CH164 disk0 : (2 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 2.00 TB (1.68 TB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.wacom.kext.ftdi (1 - SDK 10.9)
/System/Library/Extensions
[not loaded] com.wacom.kext.wacomtablet (6.3.10 - SDK 10.9)
Problem System Launch Daemons: ℹ️
[failed] com.apple.systemstatsd.plist
[failed] com.apple.ucupdate.plist
[failed] com.apple.watchdogd.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist
[not loaded] com.adobe.AdobeCreativeCloud.plist
[not loaded] com.wacom.wacomtablet.plist
Launch Daemons: ℹ️
[not loaded] com.adobe.adobeupdatedaemon.plist
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.microsoft.office.licensing.helper.plist
User Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist
[not loaded] com.adobe.ARM.[...].plist
[not loaded] com.spotify.webhelper.plist
User Login Items: ℹ️
iTunesHelper Ohjelma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Spotify Ohjelma (/Applications/Spotify.app)
SpyderUtility Ohjelma (/Applications/Datacolor/Spyder4Pro/Support/SpyderUtility.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6
AdobePDFViewer: Version: 11.0.10 - SDK 10.6
Flash Player: Version: 16.0.0.305 - SDK 10.6
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.1.0
Silverlight: Version: 5.1.30514.0 - SDK 10.6
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
WacomTablet [Click for support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 2.00 TB Disk used: 316.51 GB
Destinations:
My Book [Local]
Total size: 2.00 TB
Total number of backups: 8
Oldest backup: 2013-11-03 12:06:31 +0000
Last backup: 2015-02-17 10:06:36 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 316.51 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
0% AppleSpell
0% ps
0% fontd
0% launchd
Top Processes by Memory: ℹ️
94 MB Finder
86 MB WindowServer
73 MB Spotlight
69 MB com.apple.internetaccounts
64 MB NotificationCenter
Virtual Memory Information: ℹ️
589 MB Free RAM
1.91 GB Active RAM
1.34 GB Inactive RAM
451 MB Wired RAM
1.04 GB Page-ins
193 KB Page-outs
Diagnostics Information: ℹ️
Feb 27, 2015, 12:16:17 PM /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-02-27-121617_[redacted]. crash
Feb 27, 2015, 12:08:32 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2015-02-27-120832_[redac ted].crash
Feb 26, 2015, 08:19:12 AM /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-02-26-081912_[redacted]. crash
Feb 27, 2015, 12:46:20 PM Self test - passed
Maybe you are looking for
-
I am unable to see, access, or navigate to, the far right side of iTunes 11.3.1.2 home screen on Dell Inspiron 3000 Windows 8.1 w/64-bit Pentium Processor.
-
Hi all, Could anyone let me know if anz standard LSMW available for uploading cost element. If not do we have to do recording through LSMW? thanks in advance, Balaji
-
Hello Experts, Our client requires a new report to be generated, listing all the documents attached to any wbs elements of all the projects.We will be attaching the files through services for objects. I am stuck in providing FS to
-
Please Help installing Flash player - flashplayer 10 disappeared?
Hi, Can anyone help??? I had downloaded Flashplayer 10 prob month or two ago. We went to watch a prog on I.player and told flashplayer not installed!!! Dont know where it went as we never uninstalled it???? For days I have been trying to install Flas
-
I updated firefox 27.0.1(x86.en-US) two days ago and now it is not opening. please help me, it is frustrating. I have been using firefox for a long time and I have saved a lot. can you please help me. I have checked under firewall and Mozilla firfox