Has exceeded the maximum permitted runtime

Hello All,
I am handling Insurance utilization report. It gives you information whether Insurance is covered by Consigner , Consignee or Insurance not required
It's dumping in the production system because it's taking to much time to retrieve the data. The error message was "Has exceeded the maximum permitted runtime without interruption, and has been terminated"
select bkpfxblnr bkpfbldat BKPFBUKRS ekbebewtp rbkplifnr rbkprmwwr ekbeebeln ekbeebelp ekbelfbnr ekbelfgja lfa1name1 lfa1ort01 lfa1~pstlz
into corresponding fields of table i_table from lfa1 inner join rbkp on lfa1lifnr = rbkplifnr join ekbe on ekbebelnr = rbkpbelnr
 and ekbegjahr = rbkpgjahr join bkpf on bkpfbukrs = rbkpbukrs and bkpfxblnr = rbkpxblnr
 and bkpfbldat = rbkpbldat where bkpfblart = 'RE' and bkpfBSTAT = ' ' and bkpfbudat in s_date and bkpfbukrs in s_bukrs
 and rbkpblart = 'RE' and rbkpstblg = ' ' and ekbe~bewtp = 'Q'.
please tell me how to increase the performance of the above statement or if there any other way I can handle this please let me know.
Thanks & Best Regards,
 Mahesh

Hello,
Since your posting does not contain any information on the amount of data and used access path it's impossible to give any advice.
Some remarks:
- run the report in batch environment, in this case rdisp/max_wprun_time is ignored.
- DB2 for z/OS or DB2 for LUW(DB6) ? If DB6 move the thread to the DB6 forum
- if SAP standard report, open a problem ticket at SAP
Regards,
Thomas

Similar Messages

The program "RIAFVC20 " has exceeded the maximum permitted runtime

Hi ,
When running transaction IW49 we get a shortdump
Details of Abap run time error follows
The program "RIAFVC20 " has exceeded the maximum permitted runtime
and has therefore been terminated.
Can I have solution why this is happening.
Thanks In advance
Regards
Suresh kanna

Hello Suresh,
It means the program has exceed maximum work process runtime value set to paramter rdisp/max_wprun_time in your system. If you believe this program runs beyond that value, I suggest you to run the program in background.
If you can't run this in background, then increase the value of paramter rdisp/max_wprun_time. It is dynamic parameter (RZ11) where you don't need to restart SAP system after parameter change.
Hope your query is answered.
Thanks,
Siva Kumar

The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin

Hi There,
When i try to view info-path form item getting warning (This issue is not with all items but for some of them...)
"The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin............."
Thanks in advance!!
Regards
Vikas Mishra
Vikas Mishra

HI Vikas,
to resolve this do this from central admin
Ensure to follow the below steps.
                                         i.    Open
the central administration
                                        ii.    Go
to General Application Settings
                                       iii.    InfoPath
Form Services
                                      iv.    Configure
InfoPath Form Services
                                       v.    Click
on Data Connection Response Size
                                      vi.    By
default it is 1500 kilobytes
                                     vii.    Change
the Response Size in kilobytes (Increase the number).
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

The migration has exceeded the maximum switchover time of 100 second(s)

Hello together,
i have a big problem with my migration function on our ESX 5.1 Cluster. We have two ESX-Hosts which are connected by iSCSI and using two SAN. Also there are two switches, so we have an redundancy on all parts of the cluster. The virtual machines working on the esxhost-A and have their vmdk and so on stored on the SAN-A. A replication makes different replications to the second host (esxhost-B). Now i had to increase the RAM in both of the esx host without have a downtime. My idea was to shut down esxhost-B at first (there are no virtual machines working) and increase the RAM. Than start esxhost-B and migrate all machines from esxhost-A to esxhost-B. All works fine and fast. After that i increased the RAM in esxhost-A and started it up. Now i wanted to migrate all the machines back to esxhost-A. And this doesnt work
If i try to migrate a machine back to esxhost-A there pop up an error after 65% of migration:
I cant increase the switchover time because i have to shut down the VMs and for that and thats no possibility for me.
Can anybody help me out?
Sincerely,
Thomas G.
edit 21.08.2013: I added an attachement with a summary of the hostd.log. It is the time within the error occures.
edit 22.08.2013: added new attachement with the vmware.log
Nobody can help me?

From your reply it seems NTP is not the issue. The particular VM has a high IO workload running in it ..?
To overcome the problem what you can do is that to modify the fsr.maxSwitchoverSeconds in the VM.
If you don't know how to do it please refer kb article : VMware KB: Using Storage vMotion to migrate a virtual machine with many disks timeout
or alternatively you can follow the steps mentioned in the link which has screenshots to do the same.
~dGeorgey

Smartform Activation[program "SAPLSUNI" has exceeded the permitted runtime]

I was working on a smartform. For 2-3 Hrs it was working fine, whatever changes I was making were getting activated smoothly.
Then, for some unknown reason the smatform stopped getting activated. Timeout dump is happening. But when we 'Check' the smatform, no error is coming. Still it is not getting activated.
I checked another smarform & made some changes, activated....it got activated instantaneously. The function module of that smartform that it is showing in Environment -> Function Module Name -> /1BCDWB/SF00000144
But when we check SE37, it says no such module exists !!! Please help !!!!!!!!!!!!!!!!!!!!!!!
Here is the dump :
Runtime Errors         TIME_OUT
Date and Time          01.06.2010 12:37:24
Short text
     Time limit exceeded.
What happened?
     The program "SAPLSUNI" has exceeded the maximum permitted runtime without
     interruption and has therefore been terminated.
Error analysis
     After a specific time, the program is terminated to make the work area
     available to other users who may be waiting.
     This is to prevent a work area being blocked unnecessarily long by, for
     example:
     - Endless loops (DO, WHILE, ...),
     - Database accesses with a large result set
     - Database accesses without a suitable index (full table scan)
     The maximum runtime of a program is limited by the system profile
     parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
      time limit is
     exceeded, the system attempts to cancel any running SQL statement or
     signals the ABAP processor to stop the running program. Then the system
     waits another 60 seconds maximum. If the program is then still active,
     the work process is restarted.
Trigger Location of Runtime Error
    Program                                 SAPLSUNI
    Include                                 LSUNIU06
    Row                                     101
    Module type                             (FORM)
    Module Name                             DELETE_FUNCTION_POOL_INCLUDES
Source Code Extract
Line SourceCde
   71
   72 ENDFUNCTION.
   73
   74 &----
   75 *&      Form DELETE_FUNCTION_POOL_INCLUDES
   76 &----
   77 *       text
   78 ----
   79 *      -->P_AREA     text
   80 *      -->SKIP_PROGREtextND
   81 ----
   82 FORM delete_function_pool_includes USING    p_area
   83                                          skip_progress_ind.
   84   DATA: l_prog LIKE trdir-name,
   85         l_incl_uxx LIKE trdir-name,
   86         l_name LIKE streenode-name,
   87         l_object LIKE euobj-id,
   88         l_area LIKE rs38l-area,
   89         l_namespace LIKE rs38l-namespace.
   90
   91   CALL FUNCTION 'FUNCTION_INCLUDE_SPLIT'
   92     EXPORTING
   93       complete_area = p_area
   94     IMPORTING
   95       namespace     = l_namespace
   96       group         = l_area
   97     EXCEPTIONS
   98       OTHERS        = 6.
   99   CONCATENATE l_namespace 'SAPL' l_area INTO l_prog.
100   CONCATENATE l_namespace 'L' l_area 'UXX' INTO l_incl_uxx.
>>>>>   UPDATE progdir SET edtx = space WHERE name = l_incl_uxx AND state = 'A'.
102
103 * Hier Michael rufen
104   CALL FUNCTION 'RS_DELETE_PROGRAM'
105     EXPORTING
106       program            = l_prog
107       with_includes      = 'X'
108       suppress_popup     = 'X'
109       skip_progress_ind = skip_progress_ind
110     EXCEPTIONS
111       enqueue_lock       = 1
112       permission_failure = 2
113       reject_deletion    = 3.
114
115   IF sy-subrc = 0.
116     PERFORM ed_delete_function_pool_new(sapms38l)
117                                     USING p_area
118                                     CHANGING sy-subrc.
119
120     PERFORM delete_rest_of_group USING p_area.
Edited by: ajaybachchas on Jun 1, 2010 9:23 AM

Hey Guys,
For some reason, the problem automatically got resolved. First I check STXFADMI table to find entry of the FM against that smartform. When I punched the FM name of the smartform in SE37, it repeatedly said "FM does not exist". But the entry for that FM is present in the STXFADMI table. Hence I started debugging SE37 after entering the FM name. To my surprise, at the end the FM was displayed !!! After that I went to the smartform & activated, again surprised....it got activated in a flash !!!
Can anyway justify this mystery ?
Ajay.

Exceede maximum permitted runtime

Hello All,
I am handling sales tax return report. Its working fine in development system but in production system because of heavy data its dumping. The reason for this dump is Has exceeded the maximum permitted runtime , below one is the statement where its dumping.
SELECT fwste MWSKZ FWBAS from bset INTO (itab3-fwste,ITAB3-MWSKZ,ITAB3-FWBAS) WHERE belnr = itab1-beln and mwskz in ('B1','B2','B3','B4','B6','B5','A3').
DO anyone now whats may be the main reason for this error & have the solution for it.
Regards,
Mahesh

Hi Mahesh,
The only reason of the dump analysis is that the query you hv written taking to much time to extract data from BSET table.
Please consider primary key combination while extracting data from any table.
Use the following code for fine tunning.
SELECT fwste MWSKZ FWBAS from bset INTO (itab3-fwste,ITAB3-MWSKZ,ITAB3-FWBAS)
WHERE bukrs = itab1-bukrs and
belnr = itab1-beln and
gjahr = itab1-gjahr and
mwskz in ('B1','B2','B3','B4','B6','B5','A3').
Please select teh data based on company code, document number and fiscal year combination.
This will work more faster then wt you hv written.

Rewards points if useful.
Regards,
Kinjal

ORA-22290: operation would exceed the maximum number of opened files or LOB

i am getting this error in a procedure.
ORA-22290: operation would exceed the maximum number of opened files or LOBs
22290, 00000, "operation would exceed the maximum number of opened files or LOBs"
// *Cause: The number of open files or LOBs has reached the maximum limit.
// *Action: Close some of the opened files or LOBs and retry the operation.
NAME TYPE VALUE
session_max_open_files integer 10
Procuedure:
CREATE OR REPLACE PROCEDURE WMSOWN."PROC_WMS_XML_READ"
P_EVENT_KEY IN VARCHAR2,
X_STATUS_MSG OUT VARCHAR2,
X_STATUS OUT NUMBER
)AS
l_parser dbms_xmlparser.Parser;
domdoc xmldom.DOMDocument;
nodelist XMLDOM.DOMNODELIST;
node XMLDOM.DOMNODE;
n_child XMLDOM.DOMNODE;
elements XMLDOM.DOMELEMENT;
name_node_map XMLDOM.DOMNAMEDNODEMAP;
parent_seg varchar2(4000);
tag_name_bkp varchar2(4000); -- LOOK OUT BRAD IS CODING AGAIN
chile_seg VARCHAR2(4000);
p_seg VARCHAR2(4000);
p_seg1 VARCHAR2(4000);
p_seg2 VARCHAR2(30);
p_int_name VARCHAR2(50);
col_value VARCHAR2(100):=NULL;
len1 NUMBER;
cnt NUMBER;
seg_id_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
sequence_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_sequence NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_seq_set VARCHAR2(3); --brad coding
parent_id number; ---brad coding
valid_seg NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
data_status VARCHAR2(10);
v_main_seg VARCHAR2(50);
v_seq_no NUMBER;
V_CLOBLOCATOR CLOB;
V_FILELOCATOR BFILE;
v_amount_to_load NUMBER;
dest_offset NUMBER := 1;
src_offset NUMBER := 1;
lang_context NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
warning NUMBER;
v_event_name USR_OUB_FILE_PROCESS_DETAILS.EVENT_NAME%TYPE;
v_file_name USR_OUB_FILE_PROCESS_DETAILS.FILE_NAME%TYPE;
DIRECTORY_PATH_INVALID EXCEPTION;
PRAGMA EXCEPTION_INIT(DIRECTORY_PATH_INVALID,-22285);
NO_PRIVILEGES EXCEPTION;
PRAGMA EXCEPTION_INIT(NO_PRIVILEGES,-22286);
INVALID_DIRECTORY EXCEPTION;
PRAGMA EXCEPTION_INIT(INVALID_DIRECTORY,-22287);
FILE_NOT_FOUND EXCEPTION;
PRAGMA EXCEPTION_INIT(FILE_NOT_FOUND,-22289);
P_DIRECTORY VARCHAR2(50) :='WMS_XML_DIR_OUB';
v_whid poldat_view.wh_id%type;
BEGIN
--NAME : PROC_WMS_XML_READ.PLS
--DESCRIPTION :
-- Procedure PROC_WMS_XML_READ search XML files from remote location.
-- Open,Parse and Read XML files. Store all XML values into tables.
-- Developed by Dharmesh Patidar(jw782)
-- History: New condition is added i.e. p_seg:=parent_seg to maintain PARENT and CHILD relationship
-- by Vishwanath Dubey(jl246) on 17-June-2011
-- BRAD_XML_DEBUG table removed for CLEANING Activity by DHARMESH PATIDAR(JW782) ON 29-JUNE-2011.
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID START*/
BEGIN
SELECT event_name,file_name,WAREHOUSE_ID
INTO v_event_name, v_file_name,v_whid
FROM usr_oub_file_process_details
WHERE event_id=p_event_key
AND process_flag='U';
EXCEPTION
WHEN NO_DATA_FOUND THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Record is not available in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN TOO_MANY_ROWS THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : More than one Records found in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN VALUE_ERROR THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Varibale length is small or data type mismatch while selecting event id and event name in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting event name and event id ';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID END*/
/*LOGIC TO READ XML FROM REMOTE LOCATION START*/
DBMS_LOB.CREATETEMPORARY(V_CLOBLOCATOR, TRUE);
V_FILELOCATOR := BFILENAME(P_DIRECTORY,V_FILE_NAME);
DBMS_LOB.OPEN(V_FILELOCATOR,DBMS_LOB.FILE_READONLY);
V_AMOUNT_TO_LOAD := DBMS_LOB.GETLENGTH(V_FILELOCATOR);
DBMS_LOB.LOADCLOBFROMFILE(V_CLOBLOCATOR,
V_FILELOCATOR ,
V_AMOUNT_TO_LOAD,
DEST_OFFSET,
SRC_OFFSET,
0,
LANG_CONTEXT,
WARNING);
dbms_lob.close(V_FILELOCATOR);
/*LOGIC TO READ XML FROM REMOTE LOCATION END*/
/*Temporary Code to help with debug Clear the table before populating it with new data*/
--delete table BRAD_XML_DEBUG;
cnt:=1;
seg_id_bkp:=0;
data_status:='N';
v_seq_no:=0;
prev_seq_set:='NO';
/*create new parser.*/
l_parser := dbms_xmlparser.newParser;
dbms_xmlparser.parseClob(l_parser, replace(V_CLOBLOCATOR,'&','1x2x3x4x5'));
/*Parse the document and create a new DOM document.*/
domdoc :=dbms_xmlparser.getDocument(l_parser);
/* get all elements in the DOM*/
nodelist := XMLDOM.getElementsByTagName(DOMDoc, '*');
len1 := XMLDOM.getLength(nodelist);
/* loop through elements of the DOM */
FOR j in 1..len1-1 LOOP --MAIN LOOP START
BEGIN
/*below sql will fetch Node from table to travel xml data*/
BEGIN
SELECT int_name,tag_name
INTO p_int_name, p_seg1
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND seq_no =cnt;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN OTHERS THEN
NULL;
END;
IF cnt=1 THEN
v_main_seg:=p_seg1;
END IF;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN no_data_found THEN
null;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting interface name and tag name'||sqlerrm;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*LOGICS TO READ XML START*/
node:=XMLDOM.item(nodelist, j);
elements:=XMLDOM.makeElement(node);
parent_seg:=(xmldom.getTagName(elements));
tag_name_bkp:=(xmldom.getTagName(elements));
name_node_map:=xmldom.getAttributes(node);
n_child:=xmldom.getFirstChild(node);
col_value:=xmldom.getNodeValue(n_child);
/*get the sequence number from the interface hierarchy table */
SELECT count(1)
INTO valid_seg
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
if valid_seg>0 then
begin
SELECT seq_no
INTO sequence_bkp
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
seg_id_bkp:=seg_id_bkp+1;
p_seg:=parent_seg;--Modified by Vishwanath Dubey dated 16-jun-2011
end;
end if;
if prev_seq_set = 'NO' then
begin
prev_sequence := sequence_bkp;
prev_seq_set := 'YES';
end;
end if;
if sequence_bkp < prev_sequence then --you just moved up level(s) in the message structure
begin
select max(seg_id)
into parent_id
from usr_wms_global_xml_det
where seg_sequence = sequence_bkp-1;
prev_sequence := sequence_bkp;
end;
end if;
if sequence_bkp > prev_sequence then --you just moved down a level in the message structure
parent_id := seg_id_bkp-1;
prev_sequence := sequence_bkp;
end if;
/*end getting the hierarchy table sequence */
/*LOGICS TO READ XML END */
IF (parent_seg =p_seg1) or (parent_seg=p_seg2) THEN
if parent_seg=v_main_seg then
v_seq_no:=v_seq_no+1;
end if;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,parent_seg,seg_id_bkp,sequence_bkp,parent_id,'','','',J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END ;
p_seg:=parent_seg;
p_seg2:=P_SEG1;
cnt:=cnt+1;
ELSE
chile_seg:=parent_seg;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,p_seg,seg_id_bkp,sequence_bkp,parent_id,'',chile_seg,replace(TRIM(Col_Value),'1x2x3x4x5','&'),J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
END IF;
END LOOP; --MAIN LOOP END
dbms_xmldom.freeDocument(DOMDoc);
x_status:=0;
EXCEPTION
WHEN DIRECTORY_PATH_INVALID THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ DIRECTORY PATH IS INVALID';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN FILE_NOT_FOUND THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ INVALID XML FILE NAME OR FILE DOES NOT EXISTS';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN NO_PRIVILEGES THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ Insufficient privileges on file or directory NAME- '||p_directory||' to perform FILEOPEN operation.';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ '|| SQLERRM;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(DOMDoc);
RETURN;
END PROC_WMS_XML_READ;
Edited by: user13427480 on Feb 8, 2013 7:08 PM

when you post sql statement use also similar threads :
ORA-22290: operation would exceed the maximum number of opened files or LOB
https://kr.forums.oracle.com/forums/thread.jspa?messageID=10842417

Limit to I just recieved this message when trying to email a itunes gift certificate, "This purchase would exceed the maximum Gift Certificate purchase amount for this Apple ID".Why I am limited to gift certificate and not other purchases.?

I just recieved this message when trying to email a itunes gift certificate, "This purchase would exceed the maximum Gift Certificate purchase amount for this Apple ID".Why I am limited to gift certificate and not other purchases.?

Chris CA, 62,910 points. Dang...that's a lot of support. Before I start, let me say Thank You! You need to answer a lot of people's questions to achieve that.
1) You slightly misunderstood my letter through no fault of your own. It was a generic compilation of information submitted by members of this discussion turned into a letter by me for use on the Apple Feedback site. I myself did not receive an e-mail. I actually was prevented from purchasing any more iTunes gift cards at a certain point and was given a cryptic response from the iTunes store that my request could not be processed. It was only after investigation on my part that I found out the reason was the $100 max per 30 day rule. I'd try to find where in the Apple's support site I did find that information...but, well, you are just going to have to trust me. However, others in this discussion stated they received the information in an e-mail. I used that fact in my letter as it seemed to create a less "cumbersome" feedback submission.
2) "Why look for iOS apps?" That's a good very good question! I miswrote. I should have said "OS X apps." That is where iTunes is located on the Feedback Site. Good catch. As you know (62,910 points is a lot of "knowing"), when you submit feedback you must click on the item of which you are going to write. I must be so ramped up for the impending release of the new iPhone that I had iOS on the brain. My bad. :-)
3) In all the time this discussion has been alive (over a year), and in all my googling, I never read about an option to contact iTunes support and ask them to remove this limit from my account. It is too bad you didn't come to this discussion when it started in May of 2011 to offer that piece of advice! Surprisingly, that information wasn't anywhere on the Apple site where I read about the $100/30 day limit. Maybe it is there now. But, it sure wasn't there when I read it. It would have been very helpful.
4) You say "(which they can do and often have done for many people here)." I am curious, what do you mean by "here." Not "here" as in "here in THIS discussion forum." Right? I don't see anyone in this discussion aware of that information and posting it for others to read. By "here" I assume you mean the ENTIRE Apple Support Community. Unfortunately, until you arrived on the scene, none of those from that gigantic "here" came across THIS discussion to share their good fortune and knowledge about removing the $100 limit on iTunes gift card purchases per 30 days.
Well, I think that wraps it up for another day. I am off to iTunes support to get this limit removed from my account.
Adios amigos!
Mr. Luigi

Attempt to start procersses will exceed the maximum allowed number[1] of started applications for account

i have met a problem, when i want to start the cloud server, it has this problem tips.
but i have not start another start the processess in this account. how can i do ?

when you post sql statement use also similar threads :
ORA-22290: operation would exceed the maximum number of opened files or LOB
https://kr.forums.oracle.com/forums/thread.jspa?messageID=10842417

Your project exceeds the maximum content duration.

Save as VIDEO_TS folder....
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
Is there any way to get rid of this dumb lenght restriction??? I never put them on DVDs, so lenght or size of data doesn't matter. Any one know of another program that doesn't have this crummy restriction??
To Export movie files, I simply convert them to VIDEO_TS, and then back to movie files using DVD Ripper. Quicktime Pro has the export option, but it can't handle exporting a lot of videos at the same time with out slowing the computer down, and the Quicktime exported files are way bigger than when I use iDVD and then DVD Ripper to convert them back to a movie file.

The short answer to your question is no.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html

Your project exceeds the maximum content duration. idvd

please help !! pleaseeeee
i have been reading everyones questions and the answers!! but i still cant work it out as dont have a clue what im doing!!it says:-
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
how do i do this
my movie is very long !! but i want it all i dont mind having it on different discs !
Project:
- total project duration: 175:49 minutes
- total project capacity: 8.867 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 14:56 minutes
- total menu capacity: 63.243 MB
Movies:
- total movies duration: 160:53 minutes
- total movies capacity: 8.805 GB
please can someone help me just burn it
many thanks

iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes, and uses Constant Bitrate (CBR) encoding.
Best Quality is for videos of up to 120 minutes
Professional Quality is also for videos of up to 120 minutes but of even higher quality (and takes much longer). Both Best Quality and Professional Quality uses Variable Bitrate (VBR) encoding. The advantages of VBR are that it produces a better quality-to-space ratio compared to a CBR file of the same data. The bits available are used more flexibly to encode the sound or video data more accurately, with fewer bits used in less demanding passages and more bits used in difficult-to-encode passages.
A detailed explanation on how VBR encoding works can be read here:
http://en.wikipedia.org/wiki/Variable_bitrate
In both cases the 'maximum length' includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
This article has useful additional information:
http://hints.macworld.com/article.php?story=20080812050651997
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

Every time I go to loge in icloud it sends me a message tha t free creating emails has reach the maximum how can I reset this?????

Every time I go to log in I cloud it tells me that my phone has reaches the maximum free account uses!!!!!!!!!!!!how can I reset this?????

Have you had a look at this?
iCloud: Mailbox size and message sending limits

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

http://support.apple.com/kb/HT4627

Why Cant I Add Drop Shadow? artwork size & resolution exceeds the maximum that can be rasterized

I am making a sign for sign writing. The overall size is 2400mmx1800mm. so its quiet big.
But When I go to put a drop shadow behind it it comes up with this -
" The combination of artwork size & resolution exceeds the maximum that can be rasterized"
Why is it saying this? How do I put a drop shadow on it?

Try scaling the sign down to 600 x 450mm and building your drop shadow at a more manageable size. When you deliver your file for output, tell the vendor to enlarge the file 400% in the RIP. If it still will not work, check your HD for scratch space. If there is not enough memory available to run the operation, you will continue getting the message until you clear some space and/or increase your RAM ( if necessary ).

HELP!!! layer 0 exceeds the maximum layer size allowed (DVD STUDIO PRO)

when I try to burn a dual dvd with 7.1 gb on it. The discs are 8.5gb dual dvd's, it says this in the error box.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.
I have tried to dual layer break point on a chapter half way through and other locations, but it still says it. What do I do???? I need to get this done ASAP!!!!! Can you please help, its kinda a emegency!!!!!!
please email me back at [email protected]
Thanks so much
G5 Mac OS X (10.4.6)

Hey timeline
welcome to the apple boards...
ill give you the easy fix, although i would recommend the proper fix.
first, build your project on any of your drives so you can see your audio and video TS folders.
once you see your build, then click on "Format" and before you click on format (on the lower right hand corner of the Format window, click on the second tab and under "Layer Break" click the drop down box and whatever is NOT greyed out, can be used as a layer break.
the more proper way do it it would require you to do some calculations based on the amount of video in your project and re-encode your video.
hope that helps
Mikey M.

Has exceeded the maximum permitted runtime

Similar Messages

Maybe you are looking for