Has Firefox been updated to 8.0.1?

I am running Firefox v8.0. I am seeing that there is an update to v8.0.1. When I check for updates I keep getting a response back that Firefox is already up-to-date; no v8.0.1. I am also seeing the availability of downloading v8.0.1 via other than Mozilla. So .... what is the status of Firefox? Thanks.

Firefox 8.0.1 is still in development we don't have a official version yet but one will be released in the update channels a next days.
You should wait for the official update/ release.

Similar Messages

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    hello,
    After installing the Adobe reader, I got the following error message:
    Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

  • I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For mo

    I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file

    For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

  • How do I enable an update on a 3GS which has never been updated before?

    I need to update iPhone 3GS, as it has NEVER been updated before. Under the general/settings, there is no update icon available! How do I install this?

    The Update option on the device is only available in iOS5 and later.
    Connect the device to the computer and update via iTunes.
    How to update iOS devices

  • My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

    My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

    Morning JordenR,
    Thanks for using Apple Support Communities.
    You can resolve many restore issues using the troubleshooting steps documented here.
    For more information on this, take a look at this article:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/ts1275
    Best of luck,
    Mario

  • HT201317 My Photo Stream is on my Windows 7 PC has not been updated

    My Photo Stream is updating regularly from my iPhone 4 to my iPad, but My Photo Stream on my Windows 7 PC has not been updated for the last four months. Any suggestions?

    Hi dDub_DW,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with Photo Stream on your PC:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/ts3989
    Cheers,
    - Judy

  • Updated to iOS 5 and now photos sent with text message show as sent, but are not received to an iPhone that has not been updated.

    Updated  to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.

    This is being caused by using the same Apple ID for iMessage.  To fix this you have two choices:
    On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
    On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

  • Record has already been updated by another user. Please re-query and retry

    Hi,
    I want to uncheck the option Send e-mails for canceled notifications in Workflow mailer but getting error in fouth step in workflow Notification mailer:-
    1. Connect to Oracle Applications Manager with SYSADMIN.
    2. select Workflow manager.
    3. Click on EDIT button-->Advanced(Step 1)--->next(step 2)--->next(step 3)---"ERROR"
    This record has already been updated by another user. Please re-query and try again. ORA-06512: at "APPS.FND_SVC_COMP_PARAM_VALS_PKG", line 288 ORA-06512: at line 1
    Regards,

    Pl see if MOS Doc 286418.1 (ORA-06512: At Fnd_svc_comp_param_vals_pkg When Configuring The Java Mailer) can help
    HTH
    Srini

  • HT4972 My ipad 1 has never been updated and can't run many apps which makes it of not much use, how do I update it ? A simple step by step idiot proof guide would be best ! Can anyone help please ?

    My ipad 1 has never been updated and can't run many apps which makes it of not much use, how do I update it ? A simple step by step idiot proof guide would be best ! Can anyone help please ?

    You can only update the iPad to iOS 5.1.1and you cannot go any higher. If you never updated that high, you can do so by using iTunes on your computer. You will have to connect the iPad to your computer with the cable and launch iTunes
    You can read more here. Make sure that you read the section about using iTunes. The article starts off with using the Settings on the iPad for WiFi updates. That only works with the iPad 2 and higher that is already running iOS 5.
    Update your iPhone, iPad, or iPod touch - Support - Apple

  • HT5457 my iphone 4 has not been updated since purchase almost a year ago.it does not have the software update option in settings. how do i get to update? settings. How do I update it

    My iphone 4 has not been updated since I purchased it a year ago. When I go to settings to click software update as per instructions, the software update is not listed. How & where do I go  to update my phone?
    Thanks

    You'll have to use iTunes on your computer to get your iPhone to the latest version of iOS. From there you'll be able to update directly from the iPhone for future releases.
    http://support.apple.com/kb/HT4972
    Regards.

  • User name sent to my email address, but never arrives. Has Firefox been hacked and user info being sent to the wrong people?

    Had some issues with Firefox 35.0.1 trying to post on this forum. Fox would not accept my login, so I requested to reset my password. Password reset O.K. still a no go, thought my login was bad and requested them send my "User name" (same email) User name never arrives. I had to create a new account on the forum to post this question as I can't get my old login to work.
    Anyone else having this problem or has Firefox been hacked and my "User Name" sent to someone else?

    Hi maheman,
    Can you try to recover the password with the email and private message me a timestamp. I can ask an admin to take a look at the technical side of what is happening, the email is removed from the public thread, however it may be necessary to investigate. (please include just the username in the private message)
    Thank you.

  • HT4623 i have the first ipad which has never been updated. How can i do this

    my ipad is version 3.2.2 (7B500) , model MB293LL but has never been updated and i want to know how this can be done?

    See Here  >  http://support.apple.com/kb/HT4972
    Note:
    The iPad 1 can only update as far as iOS 5.1.1

  • My 2010 iMac has just been updated to osx 10.9 Mavericks

    My 2010 iMac has just been updated to osx 10.9 Mavericks & now runs very slowly. Has anyone experienced this problem? Any easy fixes?

    The new update(Flash Pro CC release - November 2013) that has a fix for this OSX 10.9 buzzing sound issue is now available to you. This Flash CC update will update your flash version to 13.1.0.217.
    You can update from the Adobe Creative Cloud application or from Flash Pro CC Help -> Updates menu.
    You will more information on the update at: http://helpx.adobe.com/flash/using/whats-new.html
    Thanks,
    -Sujai

  • Has there been update on firmware?

    I read the update from BT saying it was rolling out last night or something? I'm not sure how long it takes to update or whether mine has updated but I'm still getting the same issue as i've been discconected about 15 minutes ago and happens around the same time although it does happen occasionlly at night as well. I know alot of other people are having this issue but how will I know if mine has been updated? I don't look at all the settings in the HH5.

    Mine has rebooted 3 times today so far, still same firmware, and presumably still the same problem.
    Very frustrated indeed, BT's communication on this is useless, 'beginning to roll out' tells us next to nothing, like everyone else I had a perfectly working system which is now rubbish, trying to watch Netflix is a lottery, 3 quarters into a film and it reboots (or maybe not if I'm lucky), how will we know thats its fixed ?
    Add to this that it will probably reduce our speeds due to the constant reboots and this is a massive mistake made by someone at BT, how could they release such a flawed firmware ?
    I rang BT this morning before looking on the forum, I was asked my firmware number which perhaps suggests that it will change when its fixed, btw I was told that they have no eta on when that will happen.
    Terrible service.

Maybe you are looking for

  • What is resolution for uploading photos to Walgreens?

    Hi:     I just bought my first Mac computer and am trying to do the proper upload to Walgreens.  I successfully installed the automated uploader.  My question is from a PC, when I upload photos I have the option of choosing to upload in both a medium

  • UNABLE TO CAST OBJECT OF TYPE 'PROFILECOMMON' TO TYPE 'PROFILECOMMON'

    I have four web application configured on the IIS with .Net Framework 2.0 All the applications are working fine except one. If the system / server, restarted. The Application throws an error message "UNABLE TO CAST OBJECT OF TYPE 'PROFILECOMMON' TO T

  • CfSpreadsheet Read: Formulas being literally read as opposed to cell value

    I am having a problem with cfspreadsheet. I am reading an excel spreadsheet and converting it into a CSV file. I noticed that my cfspreadsheet returns formula values and not the calculated value of the cell. Is there a way to work around that? I rese

  • Updating content on return from the portlet edit URI

    I have written a portlet with a pageflow content URI and a pageflow edit URI. The content URI pageflow displays some formatted data obtained from a combination of portlet preferences and database records. The edit URI pageflow allows the user to add

  • How to load new hirearchys into BW system from R/3

    Hi For PROFIT_CT & 0Account Hirerachies in R/3 source system, a new hirearchy has been added and this new hirearchy need to load into BW system as it doesnt exists in BW system. But in infopackage selection this new hirerachy doesnt exists,hence I tr