Has fix been found to playback of clip audio in the ingest window??

Has a fix been introduced in Prelude that allows playback of clip audio from the ingest window? I read the discussion thread and it left off with the comment that Adobe is aware of isse and working on fix. I am using CC 2014 and the issue still exists.Hearing clip audio in the ingest window...has a fix been found???

Strangely enough the pref file did not show up in the Preferences folder. I don't know what this means but it could be signifigant.

Similar Messages

I restored my pc and nowit won't open itunes, when i try to, it reads " this version of itunes has not been correctly localized for this language. please run the english version." how do i fix this so i can open my itunes and back up my iphone?

I restored my pc and now it won't open itunes, when i try to, it reads " this version of itunes has not been correctly localized for this language. please run the english version." how do i fix this so i can open my itunes and back up my iphone?

Hey KEBENNETT,
It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally.
I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
Issues installing iTunes for Windows - Apple Support
All the best,
Jeremy

After the last update that I received I'm getting "This version of iTunes has not been correctly localized for this language please run the English version". How do I fix this?

After the last update that I received I'm getting "This version of iTunes has not been correctly localized for this language please run the English version". How do I fix this?

Hello LKBrown608,
The article linked below provides some useful information that can help get iTunes running on your computer.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
Allen

Deleting Aperture Trash when 'The referenced image's master has not been found'

i'm in a bit of a stick- ive got 107 images in my aperture trash with the 'The referenced image’s master has not been found'
how do i delete these?
Thanks
Nish

If I have a referenced image which has a missing master file I can stil move the version to the trash and empty the trash and it is gone from Aperture.
The only time I get any warning is if I have the check box set to also move the move the referneced master to the trash. Of course in this case Aperture can't fine the master so it can't move it to the trash. But if I click continue on the warning box the version is still removed from the Aperture trash.
So is it the missing referenced masters that you are asking how to delete? If so locate them in the finder and delete them as you would any ordinary file.
If this isn't want you are trying to do you'll need to post back.
regards

Unable to execute QEMU command 'qom-list': The command qom-list has not been found

I have been trying to get openstack working on the 2 Node Architecture - Controller (OL6.6) and Compute(OL.6.6). I am following the Oracle Openstack Installation Document but I keep getting the following error -
2015-03-26 20:32:13.662 8067 INFO nova.scheduler.filter_scheduler [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] Attempting to build 1 instance(s) uuids: [u'9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c']
2015-03-26 20:32:13.676 8067 INFO nova.scheduler.filter_scheduler [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] Choosing host WeighedHost [host: kvm4A.com, weight: 1.0] for instance 9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c
2015-03-26 20:32:33.586 8067 INFO nova.scheduler.filter_scheduler [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] Attempting to build 1 instance(s) uuids: [u'9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c']
2015-03-26 20:32:33.588 8067 ERROR nova.scheduler.filter_scheduler [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] [instance: 9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c] Error from last host: kvm4A.com (node kvm4A.com): [u'Traceback (most recent call last):\n', u' File "/usr/lib/python2.6/site-packages/nova/compute/manager.py", line 1328, in _build_instance\n set_access_ip=set_access_ip)\n', u' File "/usr/lib/python2.6/site-packages/nova/compute/manager.py", line 393, in decorated_function\n return function(self, context, *args, **kwargs)\n', u' File "/usr/lib/python2.6/site-packages/nova/compute/manager.py", line 1740, in _spawn\n LOG.exception(_(\'Instance failed to spawn\'), instance=instance)\n', u' File "/usr/lib/python2.6/site-packages/nova/openstack/common/excutils.py", line 68, in __exit__\n six.reraise(self.type_, self.value, self.tb)\n', u' File "/usr/lib/python2.6/site-packages/nova/compute/manager.py", line 1737, in _spawn\n block_device_info)\n', u' File "/usr/lib/python2.6/site-packages/nova/virt/libvirt/driver.py", line 2297, in spawn\n block_device_info)\n', u' File "/usr/lib/python2.6/site-packages/nova/virt/libvirt/driver.py", line 3704, in _create_domain_and_network\n power_on=power_on)\n', u' File "/usr/lib/python2.6/site-packages/nova/virt/libvirt/driver.py", line 3605, in _create_domain\n domain.XMLDesc(0))\n', u' File "/usr/lib/python2.6/site-packages/nova/openstack/common/excutils.py", line 68, in __exit__\n six.reraise(self.type_, self.value, self.tb)\n', u' File "/usr/lib/python2.6/site-packages/nova/virt/libvirt/driver.py", line 3600, in _create_domain\n domain.createWithFlags(launch_flags)\n', u' File "/usr/lib/python2.6/site-packages/eventlet/tpool.py", line 179, in doit\n result = proxy_call(self._autowrap, f, *args, **kwargs)\n', u' File "/usr/lib/python2.6/site-packages/eventlet/tpool.py", line 139, in proxy_call\n rv = execute(f,*args,**kwargs)\n', u' File "/usr/lib/python2.6/site-packages/eventlet/tpool.py", line 77, in tworker\n rv = meth(*args,**kwargs)\n', u' File "/usr/lib64/python2.6/site-packages/libvirt.py", line 738, in createWithFlags\n if ret == -1: raise libvirtError (\'virDomainCreateWithFlags() failed\', dom=self)\n', u"libvirtError: internal error: unable to execute QEMU command 'qom-list': The command qom-list has not been found\n"]
2015-03-26 20:32:33.592 8067 INFO nova.filters [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] Filter RetryFilter returned 0 hosts
2015-03-26 20:32:33.592 8067 WARNING nova.scheduler.driver [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] [instance: 9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c] Setting instance to ERROR state.
Any suggestions?
Thanks

Hi Avi,
The guide is for OL6 (see excerpt from page 5)
"A compute node is a system running Oracle Linux using KVM, or Oracle VM Server Release 3.3. You can download
installation ISOs of the latest version of Oracle Linux 6, or Oracle VM Server Release 3.3, from the Oracle Software
Delivery Cloud at:"
And although 1.0 release says OL6.5 and later I cannot find the OL7 pacakges on the public yum server. The only ones I can find are http://public-yum.oracle.com/public-yum-openstack-ol6.repo which is clearly OL6. I tried them on OL7 and the install fails.
[ol6_openstack10]
name=OpenStack 1.0 packages for Oracle Linux 6 (x86_64)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/openstack10/x86_64/
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
gpgcheck=1
enabled=1
[ol6_latest]
name=Oracle Linux $releasever Latest ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/$basearch/
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
gpgcheck=1
enabled=1
If you have an Oracle Openstack install running I'd love to hear how you did it and what you did to accomplish it.
Right now I'm running OL6.6 with a RDO icehouse packstack install and I'm running into problems mounting volumes.
Openstack will be awesome once I get it running
Thank you for any assistance.
Dave

Hi when I try to open my itunes a message appears 'application has failed to start becasue MSVCR80.dll has not been found. If I delete I Tunes and reinstall will all my music have to be reinstalled too?

Question, When I try to open my itunes a message appears 'application has failed to start becasue MSVCR80.dll has not been found. If I delete I Tunes and reinstall will all my music have to be reinstalled too?

Your media should be safe, though you should backup routinely anyway.
See Troubleshooting issues with iTunes for Windows updates.
tt2

HT201272 There is a TV series season that itunes identifies as PURCHASED but will not download as it says it has already been downloaded but I have no idea where the initial download is. Anyone know how to fix this?

There is a TV series season that itunes identifies as PURCHASED but will not download as it says it has already been downloaded but I have no idea where the initial download is. Anyone know how to fix this?

Cancel your storage upgrade
If you upgrade or renew your storage but no longer need it, you can cancel. If you cancel your storage plan within 15 days of an upgrade or within 45 days after a yearly payment, you can contact Apple for a full refund. After this period, you can downgrade your storage for the following year.
Note: Partial refunds are available where required by law.
From here > http://help.apple.com/icloud/?lang=en#mma3518f8580
HelpKimIsAlreadyTaken wrote:
Since I purchased about $70 worth of movies and books and they won't load onto my iPad, do you think iTunes will refund my money?
If you make more room on your Device perhaps you can View/ use the purchases...
However if you would prefer a Refund... you can always ask... be sure to explain your situation...
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note:
It is stated that all sales are final

How do i fix itunes when it says "this version of itunes has not been correctly localized for this language please run the english version"

today i decided to download some music on my windows 7 laptop, but when i tried to launch itunes it had said "this version of itunes has not been correctly localized for this language. please run the english version." i need help please!!!!! it's very irritating!

Hello jalynn231
Check out the troubleshooting steps in the first article. If it is not resolved, then try and remove iTunes and its related software in the right order and then reinstall.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Hello. I have a new Computer and import my mediathek with an externe storage. When opened the new Mediethek in front of every song there is a explanation mark: original song could not been found. I try everything. Whats the Problem??

Hello. I have a new Computer and import my mediathek with an externe storage. When opened the new Mediethek in front of every song there is a explanation mark: original song could not been found. I try everything. Whats the Problem??

But it seems the OP has a setup where the media is on the external drive, and the library files are on the internal. This is what I refer to as a split library, Migrating such from one computer to another is not straightforward. Often iTunes will have some definite idea about where the files should live, and updating the setting of the media folder won't change that. If it requires a drive letter change that is usually not too hard, but sometimes there is another preference file that needs tweaking to indicate which of the old & new layouts for the library is being used. In more extreme cases I have a script for automatically making track by track repairs.
tt2

I have a Shockwave Error: "This Shockwave movie has errors that have caused playback problems. Please contact the author of this content regarding this problem. Shockwave is unable to continue." What I can make ?

I have a Shockwave Error: "This Shockwave movie has errors that have caused playback problems. Please contact the author of this content regarding this problem. Shockwave is unable to continue." What I can make ?

This is some built-in "protection" that was engineered into Shockwave some years ago. It means that SW will ignore the first 10 script errors then throw the dialogue you are seeing. You really will have to contact the developer of the content in question to have it fixed - there's nothing anyone else can do. The developer needs to replicate your error, determine the cause, rectify it and republish their movie

TS1967 my itune library won't opn i get a message saying this versio of itunes has not been correctly localized for this lanuage please run the english version

itunes won't open it gives a message saying "this version of itunes has not been correctly localized for this language. please run the english version" i have a large library

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

My iTunes is not opening it says this version of iTunes has not been correctly localized for this language.Please run the english version, what can i do to solve it, this problem occurs in all user accounts.

My iTunes is not working, it says This version of iTunes has not been correctly localized for this language.Please run the english version. But it is already the english version, and this problem occurs in all the user accounts. What can I do?

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

This version of itunes has not been correctly localized for this language. please run the english version

Hello, I having a problem with my itunes it says that This version of itunes has not been correctly localized for this language. please run the english version ( it was working ok yesterday i don't know what happened) please help me

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

ITunes for mac is not opening saying this version of iTunes has not been correctly localized for this language. please run the english version.

I tried to open iTunes but this pop up keeps showing.
This version of iTunes has not been correctly localized for this language. please run the english version
What should i do?

Personally i would save all my existing items to another file. Delete the itunes and Download a new copy from Apple support pages and reinstall. Hopefully that won't have messed up your music. But if it does then delete all content fron Itunes and reimport your back up data

I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem.

Has fix been found to playback of clip audio in the ingest window??

Similar Messages

Maybe you are looking for