Has »get information «-tool been eliminated without substitute in acrobat 9

Good day!
Do any of You know if the »Get Information on the Fonts and Images in a Page«-tool in the »Advanced Editing Toolbar«-toolbar in Acrobat 8 has been eliminated in Acrobat 9 Pro or just moved somewhere I have so far failed to find it?

Hello Christoph,
It sounds like you had the Quite Revealing plug-in installed in your version 8.
I looks like they haven't updated it as of yet for Acro 9.
Dave

Similar Messages

Has the search keyboard screen on the iPad been eliminated on ios7

Has the search page been eliminated on ios7?

Swipe downward from the middle of the screen - this brings up the search box.

Prime Infrastructure 2.1 - getting informations from Nexus7Ks about ip to mac to physical pot table

Hello,
does anybody know if there's a way to get the following informations out of nexus 7000 and nexus 5000/2000 switches?
Environment/requirements:
- snmp v3 has to be used
- N7ks are configured with several vrfs
- SW N7K: 6.2.8a
- SW N5K: 6.0(2)N2(4)
- Prime Infrastructure 2.1
I want to see under Clients and Users entries about mac-address, ip-address, interface and vlan.
At the moment, I only get informations from N5Ks/N2Ks without ip-addresses. From the N7ks I don't get any informations.
Any hints or tricks, how to get these informations with PI2.1 out of the nexus boxes?
best regards
Markus

Hi Andy,
Check the below link , as per this Doc .. User tracking is supported in 2.0:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
Thanks-
Afroz
[Do rate the usefu post]

How do I get information about new legal requirements?

Hi
We are 4 people in a company that has 39 active company codes in about 25 countries. How can we subcribe to whenever SAP releases new reports that meets legal requirements in specific countries? Some of our companys have their bookkeeping taken care by a neighboring country, so the bookkeepers would not know if there is a new report released from SAP. So how can we get information about new reports without having to read throug all the release documentation?
Hope you can help
Jens Bald
IC Companys
Denmark

Hello Jens,
this is a real problem.
What is my experience? The first priority is: try to use the SAP Standard as far as possible. No user-defined reports, no exits. Try to be always up to date with hotpackages.
A further help for me are the userforums here. If you have five minutes left, just have a look at all the questions and answers.
I know, there is a lot of stuff to read, but the releasenotes have to be checked. Unhappily I didn't find another way.
Sometimes SAP reacts just in time regarding new legal requests - and I can understand this. At least I have to say: It is not possible to manage this without having any support from the accountancy side. This enables you to search for this requests - instead of reacting.
If a country changes statutory requests regarding taxreporting or new taxtypes, changing of rates the guys from local accountancy ought give you a hint. Because they get this information at first.
I made good experiences with internal accounting forums or user groups (i. e. northern countries, westeurope, USA, southeurope).
Maybe it gives you a little help and I am very interested in all the answers to this thread.
Best regards
Horst

Hi, I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. Any suggestions please?

Hi, I reecntly purchased a Mac and the Pages App. But now I find that I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. It is visible in both the Pages Windows and under Recent Items but just will not open. Any suggestions please?

Hi Colourdoodles,
Maybe the document is corrupted. Can you open other Pages documents? Preview may open it. Right click (or control click) on the document in Finder and Open With > Preview.
If that works, Edit > Select All, Edit > Copy. Then paste into a blank Pages document. Formatting may be messed up, but you will have editable text. Then Save (with a different name), close and see if you can open the new document.
Regards,
Ian

Why has photoshop cs6 extended been installed on my machine without me asking for it?

Why has photoshop cs6 extended been installed on my machine without me asking for it? Now, every time I start photoshop, I get this splash screen that ask me to join CC, or "to license this software," or "to continue trial." How do I get rid of all this and get back to my "normal" photoshop CS6?
Thanks in advance.

Sometimes there are server problems, downtimes, or security changes. Most problems with email are resolved by deleting the account from the iPad and then re-adding it.

How can i see if my gift card has been redeemed without redeeming it to my account?

i have a old gift card that i want to give as a gift to someone else, i see the only way to see if it has been used is to "redeem" it by entering the code and redeeming it into your account, but since i want to give it to someone else i cant redeem it into my account, so how do i see if its been redeemed without actually redeeming it?

The Only way to do that is to try to Redeem it and if it has already been used it will tell you.
How to Redeem a Code > http://support.apple.com/kb/ht1574
Note:
iTunes Gift Cards are only Valid in Country of Issue

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Can I get calendar information off of IPhone without syncing?

I would like to export my calendar info from my IPhone before I sync with google calendars and contacts. I have my contacts synced with google, but am unable to get the calendar info off without losing it during the sync. Is there a way to do this? I want to avoid losing all of my calendar data on my IPhone when I sync with Google Calendar. Can I do this without having to reenter everything manually?
I have also backed up everything in Itunes, can I just pull the info from there with a restore? Nor sure what to do.

One thing that might help out.
In order to sync calendar events to a windows computer, you would need outlook 2003 or 2007.
If you tried to get them back by doing a restore from back up, you would over write the google exchange information and be back in the same spot you started.
Hope this helps.

Why has the option to delete cookies on quit been eliminated from preferences in Firefox 12

The "Privacy" preferences panel no longer offers the option to delete cookies on quit, as it did in Ffx 6, the version I updated from. Has this option been moved elsewhere? Has it been eliminated? If it has been eliminated, what is the last version that offers it? Could you please give me a '''specific, working''' URL where I can download the latest version that allows setting a "delete on quit" policy for cookies.
If Firefox puts the user first, why are your "updates" dumming down on user-settable options, especially one as important as an easy and convenient way to prevent cookies from hanging around till the next ice age. I realize I can manually delete cookies, but this is a pain in the rear, especially since I am missing most of my fingers. All those extra strokes that the ten fingered world dismisses as trivial really add up when you have only 2.5 fingers and one eye.

Your image shows "Firefox will Remember History".
It has a dropdown arrow which usually shows -
"Firefox will Never Remember History" and, what you need,
"Firefox will Use Custom Settings". This opens a range of options.
Is this pair of dropdown arrows not working?

HT6601 Why has this update been installed without my knowledge?

Why has this update been installed without my knowledge? Why wasn't I given the opportunity to refuse the update? Isn't this update meant to stop this unauthorised access to my computer? Has this given back door access for ASIO, NSC, MI6 to my computer?

So what are your preferences set as regarding updates?
And, are you running ML as shown in your profile?
And, I downloaded and installed this update because there was a possible security issue; however, I have all automatic software update checks and downloads turned off, so i downloaded it manually as it was critical to install it as long as you are using the internet.
Has this given back door access for ASIO, NSC, MI6 to my computer?
Why would you suspect that?

I recently installed the new operating system. iMovie doesn't seem to work the same as in Mountain Lion. I can't figure out how to burn a movie to a DVD. Has that feature been eliminated?

I am having difficulty figuring out how to burn my iMovie to a DVD. Has that feature been eliminated?

unbelievable... the amount of RAM is the issue... I found a post (http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8448) on an unrelated matter, but the user solved their issue under X64 by limiting the amount of RAM WinXP x64 was using by editing the boot.ini file.
The basis of the "trick" is to add " /maxmem=4096" to the end of your OS line, but I elected to copy the line and add it to a new entry so I could easily select which "mode" i wanted at boot.... like so...
multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition - X-Fi tweak" /noexecute=optin /fastdetect /maxmem=4096
amazingly this solved my issue... but now my system properties only report 2Gb instead of 4Gb... unacceptable!
When Can I expect a fix for this Creative?

HT1267 Hi, I had bought an iPhone 4s 3 days ago & unfortunately it's been stolen at the day only,So it's a unregistered,seal peace only. What I have with me is the bill and on that the IMEI no of the iPhone. Is there any way to track it or getting informa

Hi, I had bought an iPhone 4s 3 days ago & unfortunately it's been stolen at the day only,So it's a unregistered,seal peace only. What I have with me is the bill and on that the IMEI no of the iPhone. Is there any way to track it or getting information.
Please help me out of this,,,,,....

No, there is nothing you can do if you had not setup Find my iPhone on it.
The bill and IMEI are useless for tracking a phone.

HT5295 Why has the video been eliminated in all podcasts?

I use to watch Mad Money podcasts - - however, with the new iOS, the podcasts now only as audio, the video part of the podcast has been eliminated. In checking other CNBC podcasts, like fast money or options action, the same is true, VIDEO ELIMINATED.

I have same issue and I did not upgrade to iOS 7.

İ have just got ios 5.1 for ipad but i have really important problems about charge,how could i get ios 5.0.1 without loosing my items,documents,i can't sync because my computer has problems also,thanks

İ have just got ios 5.1 for ipad but i have really important problems about charge,how could i get ios 5.0.1 without loosing my items,documents,i can't sync because my computer has problems also,thanks

Settings>general>reset>reset network settings
Settings>general>reset>reset all setting

Has »get information «-tool been eliminated without substitute in acrobat 9

Similar Messages

Maybe you are looking for