Has imaging update driver been replicated to satellite

Hi,
I'm new to the world of zenworks and linux, so i don't know too much.
We're currently running zenworks 11.2.3 and i recently installed the imaging update driver on our primaries.
Now that i have done that, how do i check if it has been replicated properly to the satellite servers?
We are running zenworks on a SLES setup
We have had some issues regarding the imaging of some of our pc models and i was recommended to do this update, that is why i want to check if it has been applied to the satellite servers.
Regards

bes wrote:
>
> AndersG;2316550 Wrote:
> > Bes,
> > > Now that i have done that, how do i check if it has been
> > > replicated properly to the satellite servers?
> >
> > I would check in the /srv/tftp dir and below to be absolutely sure.
> >
> > http://www.novell.com/rms
>
> What exactly should i check for? A specific file or?
You could check the files in the /srv/tftp/boot folder, do they have
the same time/version as the ones on your primary servers?
Niels
A true red devil...
If you find this post helpful, please show your appreciation by
clicking on the star below
A member must be logged in before s/he can assign reputation points.

Similar Messages

Has the updating problem been solved?

My feed was approved earlier today, but I am having some problems getting my page on the iTunes store to update.
RSS: http://davefarmar.libsyn.com/rss
Storefront: http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=210951638
(Note: I have already pinged iTunes per the spec. I have also already tested the feed via a manual subscription request through the iTunes pulldown menu and successfully received the updated files.)
Modifications made to my initial episode are not appearing on my iTunes store page.
A test post that I added has also not appeared at the store.
Has the updating problem, which I saw posted about shortly before the new year, been solved?
Thanks, Dave.

Looks like I just needed to be more patient (the updates have now showed up . . . sorry).

Has My External Drive Been Wiped Out?

So I have a Western Digital external hard drive that I bought in anticipation of the Leopard release in October, 2007. And it's generally worked well, until now. After being away for a few days, I turned on my iMac and the external didn't pop up. So I unplugged it and plugged it in again and after doing this, nothing came up.
Finally, a message comes up, hours later saying that the disk couldn't be initialized and the like and Disk Utility pops up. And on Disk Utility, my external is popped up... yet it shows it has the full amount of space available and that it isn't formatted.
Keep in mind that I'm a musician, I record, produce and actually put all of those files on the external to prevent myself hassle and heartache from the iMac's drive going out.
But now that this has happened... has my external wiped out? You have no idea how much I am praying to hear the words: "No."
Thanks!

First thing to do is reset the USB chip set on the mother board. Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes powering the ports to do stuff like detect when a device is plugged in or wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive. Now let it sit for a minute (give those big power caps in there time to discharge). Now reattach the keyboard & mouse, plug the power cord back in, & start up the Mac. Now see if your USB ports work any better.
Best of luck!
Patrick
What to do if your computer won't recognize a FireWire or USB device
http://support.apple.com/kb/HT1317?viewlocale=en_US

Has a release date been set for an update to iMovie 6?

The application is much faster than my old 3.0.3 version. Unfortunately it won't render. I seem to have the same problem with rendering that a number of folks have described on this board. Everthing turns white after rendering (Ken Burns and transitions)
What has apple's history been on the timing of the inevitable update?
G4 Mac OS X (10.4.4)
G4 Dual 450 Hz 1 GB memory Mac OS X (10.4.4)

Matt,
They are JPEG. They all were imported into iPhoto from an internal hard drive where I store my photos. I use that hard drive as a backup to my iPhotos.
My guess is I'll have to try one of the work-arounds mention on this board or wait until the new update and hope that works. I am hoping the update is out in weeks versus months.
tomw

I use Lightroom 5 (update)on my PC. Now I want to use Lightroom also on my notebook but it has no CD-drive. Can you help me - Wilhelm Habermalz

I use Lightroom 5 (update)on my PC. Now I want to use Lightroom also on my notebook but it has no CD-drive. Who can help me - Wilhelm Habermalz

The easiest way would be to download the trial version, and then use your existing serial number to activate. Or, if you have already downloaded the update to use to update your original installation, you could copy the file that you downloaded to a flash drive and use it on your other computer.

HT6601 Why has this update been installed without my knowledge?

Why has this update been installed without my knowledge? Why wasn't I given the opportunity to refuse the update? Isn't this update meant to stop this unauthorised access to my computer? Has this given back door access for ASIO, NSC, MI6 to my computer?

So what are your preferences set as regarding updates?
And, are you running ML as shown in your profile?
And, I downloaded and installed this update because there was a possible security issue; however, I have all automatic software update checks and downloads turned off, so i downloaded it manually as it was critical to install it as long as you are using the internet.
Has this given back door access for ASIO, NSC, MI6 to my computer?
Why would you suspect that?

P2P Replication Not working after DDL Chage has been replicated

Hi Guru,
I am using SQL Server 2008. And I have configured the DC DR P2P replication for High availability.
In DC i had dropped one column. after that my replication is not working i am getting "A DDL change has been replicated error" in replication monitor.
In order to resolve this issue i had tried to drop the same column in DR. But still the replication didn't work.
Please help me to resolve this issue.

Hi,
You have two options to make schema changes to the replicated database.
1. Drop the replication, make the changes, and recreate the replication.
2. Make the changes and let P2P replication take care of the changes.
If you drop the column from the table at the Publisher by using
ALTER TABLE <Table> DROP <Column>, the column will also be dropped from the table at all Subscribers.
In this case, the column was dropped in application. I have not tested this situation. I agree with Ashwin. You may recreate the replication to resolve the issue.
Reference:
Making Schema Changes on Publication Databases
http://msdn.microsoft.com/en-us/library/ms151870(v=sql.100).aspx
Thanks.
Tracy Cai
TechNet Community Support

Lightroom does not automatically find images that have been moved within same parent folder/drive

Lightroom does not automatically find images that have been moved within same parent folder/drive...I moved my catalog and photos to shared drive so that all users can access and when I moved photos within parent folder lightroom did not automatically adjust like in video I watched. I had to manually locate. Is there a fix for this?

Lightroom does not automatically find images that have been moved within same parent folder/drive...I moved my catalog and photos to shared drive so that all users can access and when I moved photos within parent folder lightroom did not automatically adjust like in video I watched. I had to manually locate. Is there a fix for this?
I haven't watched that video, but if you move photos in your operating system ... Lightroom does NOT automatically find these photos. Finding photos that have been moved is NOT a feature of Lightroom. So, there is no fix for this.
You would have to tell Lightroom where the photos are now located, as explained in the link from 99jon
If you must move photos, move them inside of Lightroom, not in your operating system, or better yet — don't move them, and use Lightroom tools such as keywords and other metadata to achieve organization.

Has Podcast "Update Podcast" as a contextual menu item been moved?

Has "Update Podcast" been moved down the 'right click list'? I've recently found myself hitting "Mark as Played" when I'm intending to update the available files and I'm pretty sure I'm not going crazy or senile, but it's completely screwed up my podcasts.

an89ag I know what you mean… I have nine TEDTalks video Podcasts that I downloaded from the TEDTalks' web site that, when added to iTunes, show up as Movies instead of Podcasts. From the iTunes "Get Info" they are identical to the TEDTalks Podcasts I downloaded from iTMS. These are episodes that are unavailable via iTMS, either because they were never made available or they have since been deleted.
Not all of the video Podcasts I downloaded from TED do this. iTunes and iTMS recognized about five of them, duplicated the other fifty (which was a whole other problem!) and that leaves the nine orphans that I cannot get added properly to the Podcast Library.
Apparently there is an invisible tag that iTunes reads that indicates what kind of file it is and where it is supposed to go. It isn't iTunes fault if the maker of the Podcast tags it wrong, but it would be nice to have the option in iTunes to correct these hidden tags.
Anyone have a solution for correcting the hidden tags? … Besides Lostify and vID_Infiltr8, which do not have the Podcast stik.

Has the xbox app been updated to 4.4.9014.0

has the xbox app been updated to 4.4.9014.0 for anyone cause i havent gotten it but it said it available but still havent gotten it
http://news.xbox.com/2015/04/xbox-one-new-features-in-preview-for-xbox-app-on-windows-10-and-xbox-one

On Fri, 24 Apr 2015 23:25:15 +0000, jgrizzly1 wrote:
has the xbox app been updated to 4.4.9014.0 for anyone cause i havent gotten it but it said it available but still havent gotten it
Are you running Windows 10 10061?
Paul Adare - FIM CM MVP
Aibohphobia: n. Fear of Palindromes

Error message: "Webcam driver open fail" for Satellite L305-S5875

Problem: Webcam is not working and when Camera Assistant Software is started up, the Error message, "Webcam driver open fail" pops up.
Computer: Notebook Satellite L305-S5875
OS: Windows Vista
In troubleshooting, I have unsuccessfully tried the following: Changed the webcam driver several times, rolled back driver, updated driver, and tried Chicony 2.0 USB driver, and a few other webcam drivers. The webcam initially worked fine, but about a month after installing and using Skype video, the webcam suddenly stopped working and on reboot I got the error message.
I've stopped Skype and Camera Assistant Software at startup and manually start them, as someone suggested this as a solution. I've uninstalled both and reinstalled several times. I've tried one software without the other installed... trying every possible arrangement for a solution, to no avail.
I called Customer Support and John, although very nice and patient, was not helpful. He said he'd research and call back. Didn't.
I've gone to Chicony website to try to find an more current driver than January 07. When I let Windows install the latest from the web, it installs a Microsoft 2006 driver. I don't think it's a hardware issue, as it started acting up after Skype installed. I also tried System Restore, but that didn't work either.
Suggestions?
Thanks,
SteveCo

Thanks Jerry. I spent hours going through the links you provided and tried some of the suggestions looking for a solution. Nothing worked.
I tried uninstalling Toshiba's Camera Assist software and Skype (Skype initially seemed to be the instigator of the problem), completely removing both from the registry, and removing the webcam with Device Manager. Then I made sure Vista was up to date, and then installed the latest Toshiba Camera Assist software from the Toshiba download page. After installation and rebooting, I'm getting the same error message: "Webcam driver open fail."
The webcam used to work, before we installed Skype and used it a few times. From the other posts I've read, it does seem to be a common problem... usually after Skype or another webcam-using software is installed and run.
We have another Toshiba laptop: A215-S4757, that has the same OS and webcam-using programs, and it does not have an issue. Apparently though , after going through all the links on the European message board, you provided, the L305 model is having a problem.
Open for suggestions.
SteveCo

NO AUDIO in wmp because of updated driv

This subject has been brought up many times, but I can never seem to find an answer for it... Had updated an audio driver for my sound card, and every other media player BUT
wmp is operable. Tried services.msc and stopped and started Windows Audio
services, although I heard audio one time only. Rolled back the driver,
heard sound, but my soundblaster card won't function properly without the
updated driver for some reason. How ironic that only wmp player won't produce any audio and being THE standard media player for Windows OS. What can I do to correct this problem?! Tired of rolling back. Like the upgrade very much. Real Player or I-tunes is ok, but why should I have to change because of something like this. Creative conspiracy, perhaps?

Amplifiers. You are not clear when outlining this distressing problem how the speakers themselves work. At my office all the rooms are equipped with plugin speakers, but the Mac's output has inadequate power for them, so I use a set that has its own power unit.
However, from the initial question you posted, can you confirm that normal headphones do not work (or was that one of your -- correct -- test methods to analyse this)? If that is so, there may be other problems. If you have an iPod, try the earbuds for that.

HT5313 How can I check if my iMac has this update? OS X Lion v10.7.5 Update

How can I check if my iMac has this update? OS X Lion v10.7.5 Update

It's not technically challenging, but it isn't clearly necessary. In any case here's how:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How do i load adobe photoshop elements 10 on my laptop if it has no cd drive

I purchased Adobe Photoshop Elements 10 a few years ago and have been using it on a regular laptop. I just replaced that laptop with a tablet and I want to load the software on this new device. However it does not have a cd drive. I used a portable hard drive to move the contents of the directory from the old laptop to the new laptop, but I don't know how to install.

Lenovo Yoga2, Windows 8.1
From: John Waller <[email protected]>
To: Susan Clanton <[email protected]>
Sent: Saturday, February 28, 2015 7:53 PM
Subject: how do i load adobe photoshop elements 10 on my laptop if it has no cd drive
how do i load adobe photoshop elements 10 on my laptop if it has no cd drive
created by John Waller in Downloading, Installing, Setting Up - View the full discussion
I just replaced that laptop with a tablet and I want to load the software on this new device.
Which make/model tablet? Which operating system? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7239717#7239717 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7239717#7239717 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Zen Micro firmware CIRCLE -Can't update firmware w/out driver, can't update driver w/out firmwa

Hi,
I know lots of peopl are having the same problem. I have a Zen Micro 5Gb. I have previously updated the firmware to the plays for sure (about 2 years ago) and it's been fine.
The device had had the hard dri've replaced after it failed, and I need to reload the firmware. I have all the files, I've read all the FAQ and support I used last time (I keep everything) and my notes from 2 years ago say it was easy.
However. Not now. I figure WMP caused a lot of problems. Right - got that out the way. Fresh installs of XP SP2 is the way to go.
I have also followed the instructions here:
http://http://forums.creative.com/showthread.php?t=3478
But, I keep going round in circles. Can't update firmware without driver, can't update driver without firmware.
Any driver install I try asks me to connect the device to complete the installation, but, it won't recognise the device because there is no firmware. I try to upload the firmware, and it says there is no device (because there is no driver).
I have tried multiple machines, with SP2 installed and only WMP9 (never had WMP0).
I have tried USB , 2, hubs, front ports back ports, again on multiple machines.
I've even used an XP install on VMware on a MAC (This was the closest to success).
On the Mac, The player was recognised even in its flash problem state and I could actually start the firmware update. However, it failed to complete successfully.
Has anyone actually managed to do a firmware update on n old Zen using a 2008 PC? Please help!

If your player had PlaysForSure firmware, you'll need to download a PlaysForSure firmware version. That should resolve your issues since PlaysForSure does not use a Creative driver but rather a nati've Windows driver. But you will need to have WMP0 installed, WMP9 does not support PlaysForSure.

Has imaging update driver been replicated to satellite

Similar Messages

Maybe you are looking for