Has it died, or is it just very ill??

Hi there,
Am a little freaked out. My 8 month old MBP (13inch, bought just after the newest upgrade) appears to have died on me today. I was doing a couple of things at once - internet, email, word skype, nothing that major - when the screen suddenly went blank; the battery is fully charged. There was no audible noise or change in display before it died. It now won't restart.
Any ideas what the problem is? It was bought for my PhD, and has loads of work on it. I have a time capsule, so most of it is backed up, but haven't brought it home for a while so there is a fair amount of work on it that I'd rather wasn't lost!
I have Apple Care, so hopefully everything will be fine, but wondered if anyone had any advice?
Will it be fixed or replaced do you think? Bit worried that it will happen again if it is fixed. If it is replaced, will it be like-for-like, or could I upgrade at my own cost??
Many thanks
James

If you have your disks with you, try booting from the latest OS that is installed holding down the C key. If it boots, choose your language and run the hardware test.
If your hard drive is ok, you will be able to remove it, put it in an enclosure, mount it on another computer, and move your data.
Joe

Similar Messages

  • My old computer died and I have just bought another...

    My old computer died and I have just purchased a new one.  I have been trying to sync all of my apple devices to the new computer, but I am concerned with the error message I am getting.  It says:
    "The IPhone "XXXX Iphone" is synced with another Itunes library on "XXXXX-PC".  Do you want to erase this IPhone and sync with this ITunes library?"
    "An IPhone can be synced with only one ITUNES library at a time.  Erasing and syncing replaces the contents of this IPhone with the contents of the ITunes library." 
    I don't want to lose any of the data on my IPhone, my IPad, the kids IPod Touches, etc...  How can I make this computer my new PC for my ITunes library without losing all of my info?  There has to be a way as I can't believe you have to lose all of your devices information, pics, videos just because your home computer has to be replaced.  Any help or guidance would be greatly appreciated.  Thank you very much!
    IrishCoach

    See the great user tip: https://discussions.apple.com/docs/DOC-3141 for syncing to a new device.

  • There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now?

    There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now? I wont be able to make it to the Apple store until tomorow and would prefer if there was something I could do that didnt cost money, my computers very new and I really need help.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • An insect got behind the screen of my MacBook and has since died, leaving a black dot on the screen. As this is a sealed unit the insect cannot be removed, any ideas.

    An insect got behind the screen of my MacBook and has since died, leaving a black dot on the screen. As this is a sealed unit the insect cannot be removed, any ideas.

    I believe your only option will be to get Apple to replace the screen for you, which won't be cheap.  If the machine is still covered under warranty, you could try to push the case that the screen must be defective for a bug to get in there.  Apple has been known to do free out-of-warranty service in some pretty unbelievable circumstances, that that is at their discretion, so be very pleasant and polite so they'll like you and want to help you out.    But be prepared to have to pay for the repair.
    Good luck!

  • My iPod 1g has been dying quickly after 1st sync with iTunes

    Hi-
    After my first sync with iTunes my 1st Generation iPod has been dying very quickly. And I charge it all night, but when I turn it on it says that I only have 20% battery then maybe 5-10 minutes later it says I have a full battery. What is going on? I bought this iPod used with no mannual. The whole 20% battery issue happened right from the point I got it.
    Thanks so much!

    Let the battery fully drain. After charging for an hour try a reset (both buttons) and connect to computer and try to restore. If screen is still white you very likely have a hardware problems.

  • HT201210 Trying to update my Iphone 4s, I have got error 1604, my phone has completely died.

    Hello All,
    I have just tried to update my Iphone 4S which is still under a year old but the phone has completely died of. All I get is error 1604, can someone tell me what to do as the phone failed to roll back to the previous OS.
    Regards
    Bold Eagle.

    It might be a bad USB connector.
    http://support.apple.com/kb/TS3694#error1604

  • Iphone5s has completely died

    Just updated the new bug fix and phone has has completely died.  I have tried to hold down the home button and the on/off switch for ages but doesn't seem to kick start it.   What can I do??  Only had the phone since Monday....
    Help please...

    I am not sure you can get the data on the device back.  Take a look at the solution provided here:
    http://supportforums.blackberry.com/t5/BlackBerry-​Z30/please-help-am-in-a-big-mess/m-p/2813428/highl​...
    I checked this fourm for solved issues that are related to yours.  There are several things you can try, give them a quick read and let us what you've tried and the results.
    http://supportforums.blackberry.com/t5/forums/sear​chpage/tab/message?solved=true&page=1&q=z10+red+li​...
    Are you in the US?
    I was asking because of the solution listed here:
    http://supportforums.blackberry.com/t5/BlackBerry-​Z10/Z10-Would-not-turn-on-More-details-on-post/m-p​...
    the link has been updated to http://global.blackberry.com/en/support/support-st​ore-locations.html instead of what is in that thread. 
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • HT201559 my iphone 4 has completely died.. how can I retrieve my contacts and photos from icloud?

    my iphone 4 has completely died.. how can I retrieve my contacts and photos from icloud?

    Hi you can take to Apple Store they may Replace with a Refurbished, one but you will need to pay part of cost. Make an Appointment, if you do get Another iphone when you set it up Just use the same Apple, id & password then you will get all your Apps & Data back. Cheers Brian

  • Recently my mac has started making faint clicking noises just like a fan catching something as it spins round, it is only faint but i can notice it -any suggestions please

    Recently my mac has started making faint clicking noises just like a fan catching against something, it is only faint but loud enough to hear. any suggestions please

    While it could be a cooling fan, a noise like that is usually a sign of a dying hard drive. Back up everything immediately. Make immediate backups of any new documents you create after the full backup.

  • Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

    Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
    I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high? 
    How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?  
    Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
    Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
    Thanks for any clarification on these matters.

    siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

  • HT201272 How can I recover a purchased app on one itouch (which has since died) and put it on my new itouch device if I haven't syncronised my old device with my mac/itunes account before it died?

    How can I recover a purchased app on one itouch (which has since died) and put it on my new itouch device if I haven't syncronised my old device with my mac/itunes account before it died?

    It is easy to download items you have purchased from iTunes again; this article will walk you through it: http://support.apple.com/kb/HT2519
    You want the "Apps on iOS" section.

  • I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

    I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings If yu can see the screen enough to do it)
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store since you have a hardware problem.
    Apple Retail Store - Genius Bar

  • The lock button on my Phone 5 has stopped working completely. It just will not work anymore so I have to rely on the auto-lock . Will apple replace me phone?

    I have an Iphone 5 on contract with T-mobile/EE. The lock button on my Phone 5 has stopped working completely. It just will not work anymore so I have to rely on the auto-lock . Will apple replace my phone or do I ahve to take it back to T-mobile? It is just short of a year into a 24 month contract.

    Yes; If it's under the one year hard ware warrnety and it doesn't have any damage on the device you can get it replaced, contact Apple ASAP

  • My iPhone 5 has totally died!! Even after charging it all night it won't come on!!

    Help!! My phone has totally died, black screen even after charging it using two different chargers!!

    It may be the charging cable that is faulty. Try another one.

  • Error -43  when try playback on win7 64bits over the network QT that recide MacPro  osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

    error -43  when try playback on win7 64bits over the network QT that recide MacPro  osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT  nfs sharing

    Never mind, I already found the solution myself.
    What I did wrong was:
    - not copying the master image to the nbi folder
    - selecting the netinstall-restore.dmg image as source to copy to my HD.
    The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
    With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
    In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
    Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
    http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
    This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

Maybe you are looking for

  • Stuck with grey Loading... Screen

    Hi everybody, I am experiencing an issue with our eLearning modules. I'm not sure where the source of this issue lies, so here is what happens: 1) The eLearning is opened on the LMS 2) The user can normally do the eLearning 3) He stops and closes the

  • How to create a dynamic tag in MII

    Hi  , I want to repeat this item tag for different segments and for each segment the <SEGNAM> will be changing and <SDATA> i am fetching from DB. Is there any way to make this item tag a dynamic tag. so that i will use the same item tag for different

  • Fill in PDF forms and save/export as *un-editable* PDF?

    Hi all, I have a client for whom I am creating an invoice template. I created the file in InDesign and have exported as a PDF. Working with Adobe Acrobat Pro 8.1.4 on Mac 10.6.8, I have managed to add text fields for my client to fill in with job-spe

  • Working with DataProvider - tutorial

    I created a page following the instructions in the 'Working with Data Provider' tutorial - for page2. i.e., I created a page with some fields bound to a data provider (at page level) whose rowset is in session bean. The page has commit and reset butt

  • Defragmenting Planning Cube with Refresh

    Has any body ever worked across a script which will defragment the planning app cubes(3 cubes in an app say). Essbase cubes its easy I know. clearing lev0 data/reset cube/load data ang aggregate. For planning cubes the process need to be 100% automat