Has iTunes stopped using the iTunNORM tag?

Recently, I was trying to figure out whether I wanted to use info generated by the replay_gain algorithm in my iTunNORM tags, so I experimented with a couple of things, and one of things I did was to remove the iTunNORM tag completely from a copy of an aac file. I then added this song to iTunes, I noticed that the file remained unchanged, the iTunNORM tag was not created ( and yes I had the Sound Check feature on)
So then I picked a song that I had, and I generated 3 aac's from it (one where I amplified the volume, one I decreased the volume, and one with the volume unchanged), so there was no iTunNORM tag in the files, no replay_gain tags in the files. I then added these songs to iTunes, and found out that soundcheck now works without adding the itunNORM tag to aac's; that is to say, if I have Sound Check off, then the 3 test acc's will play at different levels of loudness, and if it is on then they sound to be at the same level of loudness.
Has anyone else noticed this behaviour?
Has iTunes stop using the iTunNORM tag?
BTW:
I used foobar and qtaacenc (QuickTime commandline encoder) to create the aac files.
I did this after I had upgraded to iTunes 11, I have since downgraded to 10.7 and I have gotten the same results. I am using the 64 bit windows version of iTunes.

Also I'm very very interested in knowing the answer to your question.
I posted yesterday some questions (among which your question itself) here "https://discussions.apple.com/thread/4791322" but nobody answered me yet.
Did you find out at last if iTunes 10 stopped using the iTunNorm tag and where it eventually write soundcheck info into an mp3 file?
Thank you very much for your anser.

Similar Messages

ITunes stops at the progress of "backing up"

When I plug in my Iphone, the ITunes stops at the progress of "backing up"
I can't transfer any music to my IPhone right now.

I am experiencing this issue as well on 7.0.1.8. It occurs at the end of the last item of any given set of things playing, i.e. playlist, album, podcast, etc. It has nothing to do with crossfade, checked/unchecked or anything else but the song's position at the end of the set.
Beyond being a little weird, kind of annoying, and not incrementing the play count, I think it's the root cause of an actual problem I am noticing. My podcast settings include the option to "keep all UNPLAYED episodes". In prior versions if I listened to a podcast all the way to the end it would get deleted the next time new episodes were checked for. Now, in this version, there is nothing I can do to get iTunes to automatically clean up the podcasts I'm done with. Manually deleting them is fine, but it's impossible to look at the list and remember which ones I finished and which ones I'm in the middle of listening to. It's also just a bummer that something that used to work nicely now doesn't function quite as cleanly.
Intel Core 2 Duo 6400; 2GB Corsair TWIN2X2048-6400C4; Asus P5B Deluxe WiFi; GeForce 7950GT 512MB Windows XP Pro 20GB 3rd Gen iPod

HT2542 Can we have two separate itunes accounts using the same mac?

I am wanting to download music to my Thunderbolt smart phone (i know, no iphone yet, next upgrade) and I want to use itunes to do it. My partner has an itunes account and I thought I opened my own itunes account, but apparently I didn't. I don't like the same music and only want to download music I like to my phone. Can we just have one account and be able to download checked music from the itunes to multiple devices?

I'm confused
Can we have two separate itunes accounts using the same mac?
Can we just have one account and be able to download checked music from the itunes to multiple devices?
Do you want one or two?
By the way, and iTunes account is really the thing you use online to purchase music, not what you have on a computer. You have user accounts on a computer, and you have iTunes libraries or collections of media. You can have multiple user accounts on a computer. You can have a single or multiple user accounts use a single or multiple libraries. We need to know exactly what it is you have/want.

I stopped using the IPad application but still get charged for that, how can I stop it?

I stopped using the IPad application but still get charged for that, how can I stop it?

Which iPad app ? If you mean one that has an auto-renewing subscription within it then there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098

Why have apple or itunes stop use iTunes Store Customer Service

why have apple or itunes stop use itunes store customer service
i have some qustions about itunes and itunes store and im uset to mail to them but now i cant find itunes store customer service what happen to it?

Click the Support tab above, then the Get Started link in the Contact Apple Support area and follow the on-screen directions, making the selections as appropriate.
Regards.

How to use the Wire-Tag in Cairngorm 3 Observer Library?

Dear Observer-Lib coders,
Maybe I am posting my issue into the wrong forum, see this thread:
http://forums.adobe.com/thread/756046
I'd like to know how to use the Wire-Tag mentioned in the Observer-Lib docu, see:
http://sourceforge.net/adobe/cairngorm/wiki/HowToUseCairngormObserver/
Please let me know if there is anybody who knows how to use
this Wire-tag. A small code example would be great, too!
Thank you,
masu

Ok ... I solved it!
see this thread: http://forums.adobe.com/thread/756046

How to use the HTML tags in the reports.

hi.
can any one tell me how to use the HTML tags in the reports.
i m using the forms 10 g rel 2 and reports 10 g rel 2 and application server 10g rel 2.

Set the Contains HTML Tags property of an object to Yes, then the tags in the object's text (if any) will be used to format the object.

Adding a pre-existing podcast to iTunes U using the feed method.

While trying to add another pre-existing CSULB podcast to our CSULB on iTunes U (using the "feed" method), I encountered an error message that I don't know how to interpret.
Can you help me with this or is there somebody else at Apple I should work with?
The pre-existing podcast is at: http://www.ccpe.csulb.edu/citt/podcast/feed.aspx
The error message reads:
"While attempting to download. . . iTunes U encountered an authorization error and could not update the content. Verity your authorization access to the feed specified in the feed URL field, including the user name and password permissions, and then try again."
I have no idea what this means. Can someone please help?
Walter

bgerth wrote:
Is anyone using Podcast Producer 2 to publish content on iTunes U, and if so, does it work reasonably well (do you recommend using it)?
Its spiffy. I like it, but I'm a softie when it comes to Apple stuff.
Am I correct in thinking Podcast Producer 2 can only be used to create an RSS feed to point to podcasts stored in its Podcast Library or can you use Podcast Producer to upload files into our institutional iTunes U storage space (yes we are fortunate to have access to Apple's 500 GB storage space)?
You can choose to do either. Although I haven't seen anything official, I suspect that Apple prefers the use of Podcast Library…but that's just a preference, not any sort of recommendation or future direction. In the end, I suggest (and I think Apple would agree) that you do what makes the most sense for you. For example, we choose to do it both ways.
Can you provide a link to instructions (or explain how to either identify in iTunes U that the podcast is in Podcast Producer's Podcast Library as an RSS Feed or how to upload the podcast from Podcast Producer to a specific tab in a specific iTunes tab.
I believe someone (a friend from Apple…??) released a PcP workflow action that deals with iTunes U the same way as PcPv1 did. Overall, though, probably the best kept PcP secret is that Podcast Producer is a generalized workflow solution. Sure, it's cast as a podcasting solution…but if you can get OS X Server to do something, you can get Podcast Producer to turn it into a workflow…anything. Since OS X Server can be scripted to upload content to iTunes U, Podcast Producer can handle that too.
I appreciate any information given as I have tried with little success to find this information in either the iTunes U or Podcast Producer Admin guides.
Thanks!!
BGerth

Should I use the FLOAT tag here?

Hello again- Should I be using the FLOAT tag in cases where I have several vertically stacked DIVs that have the WIDTH set at 100%? Or am I just being silly in thinking I should? Thanks in advance-

No.
float is something you use when you need text to flow around something. And if you're trying to do a column or an aside, you'd definitely not want it to float, unless it sits inside a larger <div> or element with text.
Here's an example:
.container {
          width: 960px;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
          background-image: url("../images/bkg.png");
          -webkit-box-shadow: 0 0 20px #111;
          box-shadow: 0 0 20px #111;
          padding: 1px;
.sidebar1 {
          float: left;
          width: 180px;
          padding-bottom: 10px;
          color: #fff;
.content {
          padding: 10px 0;
          width: 780px;
          float: left;
Here, you have a container and a sidebar and main content area. Both are floated left, in that they start at the left hand side of the container.
-Mark

My audiobook is for sale on iTunes, but iTunes is using the wrong "Preview" section. The section they used is the only 30 sec. in Spanish and the rest of the book is in English. How can I get iTunes to fix this?

My audiobook is for sale on iTunes, but iTunes is using the wrong "Preview" section. The section they used is the only 30 sec. in Spanish and the rest of the book is in English. How can I get iTunes to fix this?

Hello,
Is your problem solved ? i got exactly the same problem... So boring...
Thanks

Using the HTML tags in Oracle Alerts

Hi all,
Can we use the HTML Tags in Oracle Alerts at Alert Details window in Text(D) Column?
Please Provide solution to format the data which is sending to Mail from Oracle Alerts.

What version of ebusiness are you running? You should be able to utilise html tags without an issue in 11i.

When is it a good idea, if ever, to use the font tag?

Wonder if there is ever a need to use the <font> tag since it is deprecated in HTML 3.801.
<font size="3" color="red">This is some text!</font>

(sidenote: this was a trick question...it was deprecated in HTML 4.01 )
I'm still on my first cup of coffee, but wasn't it deprecated in 4.0?
http://www.w3.org/TR/REC-html40-971218/present/graphics.html#h-15.2.2
http://www.w3.org/TR/REC-html40/present/graphics.html#edef-FONT
And obsoleted in 4.01 Strict (recommended since 1999)
http://www.w3.org/TR/html401/struct/global.html#version-info
and obsolete in XHTML 1.01 (if not XHTML 1.0)?
http://www.w3.org/TR/xhtml11/doctype.html#s_doctype
Mark A. Boyd
Keep-On-Learnin'

Using the ORACLE tag

Hi,
I am trying to remeber how to use PL/SQL code using the <ORACLE> tag in some of the pre-defined portlets.
Please HELP!
I tried to use this in HTML portlet
<ORACLE>
execute schema.some_procedure;
</ORACLE>
... and it didnt work.
Thanx for any advice.
Petr

Petr,
I'm not sure why the HTML portlet doesn't display but I was able to display using an unstructured UI template.
for e.g
<oracle>
declare
enduser varchar2(20);
begin
enduser:=portal.wwctx_api.get_user;
htp.p(enduser);
end;
</oracle>

Using the CellRepeater Tag

Hi
Is it possible to specify a table header using the cellRepeater Tag ? i am bale
to get my table rendered dynamically using a cellRepeater tag but am not able
to get the table header.
The doc does not specify any attribute for table header . Wonder why it was omitted
as this is such a cool tag .
Any inputs to the above would be great
Thanks
Kar

Eddie
The whole reason for me using the cellrepetaer tag is that we have a requirement
to dynamically create a table and its columns depending on the total number of
result objects returned from domain . I was able to get the table dynamically
created with the dynamically provided number of columns but was not able to incorporate
table headers for the same . For example if we have 3 columns then we need 3 headers
, if 2 cols then we need 2 headers etc.
The way i got around it it have a separate cellrepeater tag and its purpose is
just to render the column headers depending on the number columns available .
Is there any struts equivalent to cellrepeater tag ? I wish there were :) but
hey i still love this tag as it made my job a lot easier .
Thanks
Kar
Eddie O'Neil <[email protected]> wrote:
Kar--
This isn't something that the cellrepeater supports in 8.1. It was
really intended to just
render cells without the top row set aside as the table header.
You might be able to accomplish something similar using the repeater
and occasionally rendering a
</tr><tr> to close the current row, but I haven't tried this case myself.
How would you want the table header on the cellrepeater to work?
Eddie
kar piyush wrote:
Hi
Is it possible to specify a table header using the cellRepeater Tag? i am bale
to get my table rendered dynamically using a cellRepeater tag but amnot able
to get the table header.
The doc does not specify any attribute for table header . Wonder whyit was omitted
as this is such a cool tag .
Any inputs to the above would be great
Thanks
Kar

Safari 5.1 won't play .mov files using the embed tag

Since upgrading to Lion (and Safari 5.1), any page that loads a .mov file using the <object><embed> tags gives me a "Plug-in Failure" error. If I take the HTML and load the same file using the <video> tag it works fine.
Did Apple drop support for the embed tag? Is there something going on with my Quicktime plugin?
Here is an example of a page with an embedded .mov:
http://www.mediacollege.com/video/format/mpeg4/streaming/example.html
Does this work for anyone running Safari 5.1 in Lion?

please check to verify if you have the remains of plug-in attched to DivX and make sure you have installed quicktime plug-in by going to Safari -- Help -- Installed Plug-ins. If you ever uninstalled Divx without using Divxuninstaller, you'll meet this problem.
Now download Divxinstaller.dmg and run it. Then you'll see the uninstaller in the corresponding application folder.
Click uninstaller to fully uninstall Divx. Relaunch safari and enjoy!

Has iTunes stopped using the iTunNORM tag?

Similar Messages

Maybe you are looking for