Has not reached me the sms

has not reached me the sms with the code to reset my keychain iCloud.

Hello coni chile
Check out the steps below to get the SMS to reset your iCloud keychain. The article will also have some additional support options for other issues with iCloud keychain as well.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
I'm not receiving the verification code via SMS.
1      Make sure that you have a strong cellular network connection on your phone.
2      Make sure that your phone number can receive SMS messages. You can do this by asking someone to send you a text message.
3      Make sure that the correct phone number is associated with your account:
▪       iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
▪       OS X Mavericks v10.9 or later: Choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number listed under Verification number is correct. If not, enter another phone number.
4      If you can't access a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity to get help completing iCloud Keychain setup.
Regards,
-Norm G.

Similar Messages

  • ClssgsGroupJoin: CSS has not reached fatal mode!Please help!

    redhat 4+vmware6.0+oracle10gRAC
    After installation,run root.sh.can't run crs and cssd demon,found many errors in crsd.log:
    clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
    clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
    clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
    clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
    clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
    please help me !!!

    Basic troubleshooting steps as outlined in the User Guide are restart, reset, restore from backup and finally restore as a new device.  If you've tried ALL 4 of these steps and you're still having problems, by all means, bring your phone into an Apple sotre for evaluation.

  • I have seen that some of my Itunes music has not gone to the cloud, and I can't seem to refreash this? What should I do?

    I have seen that some of my Itunes music has not gone to the cloud, and I can't seem to refreash this? What should I do?

    First try:
    iTunes: Finding lost media and downloads
    Next
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    For other music y will have to get them like you did before

  • I tried to reset my iPad, and it has not got past the apple start up page

    I tried to reset my iPad, and it has not got past the apple start up in several hours. I've tried connecting it to itunes but its not detected.
    What can I do?

    I assume that you mean that all you see on the screen is the Apple logo and it hasn't changed for hours from that screen. You may need to restore using recovery mode, since your iPad is not being recognized in iTunes.
    Instructions here.
    http://support.apple.com/kb/ht4097
    But - did you try this first?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • The current user username has not been granted the ADVISOR privilege despite having it !

    Hi,
    I'm trying to follow ML note 2499931.1 'Using Dbms_Advisor.Tune_Mview To Optimize Materialized Views For Fast Refresh' and am receiving an error suggesting the user4 does Not have the Advisor privilege
    despite the fact that it does. What am I missing ?
    Every note I've found so far suggests granting the privilege is the fix.
    I have and continue to receive the error.
    Version 11.2.0.3 on Redhat 5
    select * from dba_sys_privs where grantee = 'SOAUSER';
    GRANTEE                        PRIVILEGE                                ADM
    SOAUSER                        CREATE MATERIALIZED VIEW                 NO
    SOAUSER                        CREATE VIEW                              NO
    SOAUSER                        CREATE PUBLIC SYNONYM                    NO
    SOAUSER                        SELECT ANY DICTIONARY                    NO
    SOAUSER                        ON COMMIT REFRESH                        NO
    SOAUSER                        CREATE ANY DIRECTORY                     NO
    SOAUSER                        CREATE DATABASE LINK                     NO
    SOAUSER                        SELECT ANY TABLE                         NO
    SOAUSER                        ADVISOR                                  NO
    SOAUSER                        UNLIMITED TABLESPACE                     NO
    SOAUSER                        CREATE SESSION                           NO
    Error at line 2
    ORA-13616: The current user SOAUSER has not been granted the ADVISOR privilege.
    ORA-06512: at "SYS.PRVT_ADVISOR", line 4869
    ORA-06512: at "SYS.DBMS_ADVISOR", line 1969
    ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 490
    ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 970
    ORA-06512: at "SYS.DBMS_ADVISOR", line 739
    ORA-06512: at line 3
    Thanks in Advance
    Ken

    Sorry, but the code I was receiving the error message for is essentially   the same as the example in the note. Assumed people would have access to the note.
    The statement is:
    variable foo varchar2(20);
    declare foo varchar2(20) := 'ken_foo';
    begin
    dbms_advisor.tune_mview(:foo,
    'create materialized view ken_foo
    as
    select 
    papf.rowid R_papf,
    paaf.rowid R_paaf,
    gcc.rowid R_gcc,
    papf.employee_number,
    gcc.segment4 cost_center
    from hr.per_all_people_f@atc_pp_to_ebs_atcllc papf,
         hr.per_all_assignments_f@atc_pp_to_ebs_atcllc paaf,
         gl.gl_code_combinations@atc_pp_to_ebs_atcllc gcc
    where papf.person_id = paaf.person_id
    --and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
    --and trunc(sysdate) between paaf.effective_start_date and paaf.effective_end_date
    and paaf.default_code_comb_id = gcc.code_combination_id');
    end;
    Per another forum the answer appears to be that sys didn’t have the advisor privilege.
    Granted advisor to sys and ran the statement again as soauser and no error.
    Thanks
    Ken

  • I wonder why that has not been deducted the amount from my bank account

    I wonder why that has not been deducted the amount from my bank account

    Hello Iria,
    Most unusual.  I think you will need to wait a few days in case it is a bank problem.
    If this situation continues you should contact Apple, after all, you don't want to be thought of as taking advantage, I'm sure.  That's why you raised it in the first place.
    Do keep us updated.
    Thank you for the star.

  • Logon failure; the user has not been granted the requested logon type at this computer (IE App)

    Hello,
    Question of a newbie:
    In Windows Server 2012 I'm using IE10 to simulate numerous different users. But for some of these "fake" users I got the error:
    Logon failure; the user has not been granted the requested logon type at this computer.
    So I opened PowerShell : GPEDIT.MSC
    Computer Configuration / Windows Settings / Security Settings / Local Policies / User Rights Assignment.
    In the detail zone : Double-Clic sur Allow log on locally.
    Dialog box : Allow log on locally properties
    But the Add User or Group
    button is grayed out!
    What can I do?
    Thanks for your help!

    Several months after...
    I found the solution : the user has to be member of the Server
    Operators in Active Directory. 
    That's all :)
    Thanks

  • Hello, today I am subscribed to  photoshop CC  but still has not passed and the activation of the post did not come serial number that do tell me?

    Hello, today I am subscribed to  photoshop CC  but still has not passed and the activation of the post did not come serial number that do tell me?

    creative cloud does not use a serial number.  it uses your adobe id.
    download the creative cloud desktop app (after signing in with your adobe id), Download Adobe Creative Cloud apps | Free Adobe CC trial
    and use the desktop app to install your adobe creative cloud programs.
    if you already have the cc desktop app and you need to refresh your adobe id, Sign in, Sign out | Creative Cloud desktop app

  • Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

    Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

    I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
    DT

  • XA resource [weblogic.jdbc.jts.Connection] has not responded in the last 120 second(s).

    I frequently encounter this problem: The application calls long-lasting stored
    procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
    just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
    in the last 120 second(s)."
    Questions:
    Does increasing thread count help? Default is 15. Is 30 or larger OK?
    Can anybody share their experience on this matter?
    Detailed log messages in weblogic.log are follows:
    ####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
    <Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
    responded in the last 120 second(s).>
    ####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
    <> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
    is now available.>
    ####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
    <Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
    responded in the last 120 second(s).>

    Andrew Ng wrote:
    I frequently encounter this problem: The application calls long-lasting stored
    procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
    just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
    in the last 120 second(s)."
    Questions:
    Does increasing thread count help? Default is 15. Is 30 or larger OK?Increasing thread count isn't going to help. The local server is just waiting for the
    remote system to respond.
    >
    Can anybody share their experience on this matter?
    Detailed log messages in weblogic.log are follows:
    ####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
    <Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
    responded in the last 120 second(s).>
    ####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
    <> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
    is now available.>
    ####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
    <Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
    responded in the last 120 second(s).>

  • I just downloaded a few tv show and the 'info' / 'description' section has not downloaded for the episodes...on previous items it has downloaded just not the recent few? Any ideas why?

    I just downloaded a few tv show and the 'info' / 'description' section has not downloaded for the episodes...on previous items it has downloaded just not the recent few? Any ideas why?

    Check permissions and ownership of the files. Maybe this helps....
    How to Take Ownership and Grant Permissions in Windows Vista

  • Failed to start worker process: Logon failure: the user has not been granted the requested logon type at this computer. (0x80070569

    We just rebuilt our machine with server 2012, and it was working flawlessly and then randomly it started giving me this error if i would try to start up a machine. At first this was just an annoyance but now it is worrying me greatly. I have tried
    everything from logging on as the domain admin account to the actual server administrator account. Nothing seems to start these machines up, and I need them to start.
    'Computer1' failed to start worker process: Logon failure: the user has not been granted the requested logon type at this computer. (0x80070569). 

    Hi,
    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as 'Answered' as the previous steps should be helpful for many similar scenarios.
    If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You can also choose to unmark the answer as you wish.
    In addition, we'd love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
    Thanks!
    Lawrence
    TechNet Community Support

  • I can't use my apple account in my Iphone please help me a message appear said"This ID has not used in the iTunes Store"

    I can't use my apple account in my Iphone please help me a message appear said"This ID has not used in the iTunes Store"

    Hello, BaraaBa. 
    Thank you for visiting Apple Support Communities.
    This sounds like your Apple ID has not yet been used with the iTunes Store.  Here is an article that I would recommend going through when experiencing this issue.
    Use your Apple ID with the iTunes Store
    Open the latest version of iTunes.
    Choose Store > Sign In.
    Enter your Apple ID and password and click Sign In.
    Click Review when asked to review your information.
    Enter your billing information.
    Click Continue after you enter your credit card and billing information. You can remove or edit your credit card information at any time. Learn more about updating your iTunes Store account information.
    Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
    http://support.apple.com/kb/HT2589
    Cheers,
    Jason H.

  • My iPhone has not downloaded from the iCloud properly but I have added more stuff since can I back up

    My iPhone has not downloaded from the iCloud properly but I have added more stuff since can I back up

    Regarding the first question, the following gives details on what should be done with a phone being transferred to someone else: http://support.apple.com/kb/ht5661

  • I have reset my rescue email as the email is no longer valid but it has not changed in the secure account section  please help

    I have reset my rescue email as the email is no longer valid but it has not changed in the secure account section  please help

    Hello
    Try restoring the device and setting up as new.
    If it is still shows an iCloud activation lock, then it's on an iCloud account
               The wrong device was removed from an iCloud account.
    Check any other Apple IDs you might have at
                 iCloud.com
    Get signed into them and remove that device.
    I wish this was the first time I seen this.
    Best of Luck

Maybe you are looking for