Has occurred in UPDATE_INFOCUBE
Please help this Error.
Wrror has occurred in UPDATE_INFOCUBE" and the fix!
Rgds,
Mohan
hi
error in Update_infocube,Rsau499
brconnect update stats on an infocube
can you give clear information
Similar Messages
-
Error has occurred in UPDATE_INFOCUBE
Hi All,
Iam working on SRM (Bidding Engine) area, i have used the standard info Cubes and DSO only.
Data Flow is Info Cube 0SR_BIDC1 is getting updated through three DSO: 0BBP_BID, 0BBP_QUO, 0SR_BIDO1.
Out of which when iam updating the data from these three DSO, data is getting updated sucessfully through two ODS with out any error but with one DSO i.e., 0BBP_BID it is giving me the error Error has occurred in UPDATE_INFOCUBE.
when i check in the step by step analysis it is giving me this message:
*Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by: Update rules*
can anybody suggest me the approach how i can proceed further.
Regards
PrabhakarHi Kishore,
Yes, there is a start routine in the update rules. i have checked the code, but in that routine only one field is refered for the updation Processing Status of the BID (0BBP_PROBID)
Code is as follow's:
LOOP AT DATA_PACKAGE.
IF DATA_PACKAGE-bbp_probid = 'I1009'.
bid invitation is held*
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.*
Please check this one, an early reply is appreciated.
Regards
Prabhakar -
I'm encountering this error and not sure how to fix, I'm quite new to vCenter so please bear with me.
I'm trying out vCenter 5.1 with Update Manager 5.1 right now. No license key has been entered and I still have 50 odd days to try it out.
2 ESXi hosts are being managed by this vCenter, and they're both running ESXi 4.0
I'm looking to use Update Manager to try to upgrade the ESXi 4.0 hosts to ESXi 5.1
I downloaded the image file VMware-VIMSetup-all-5.1.0-799735.iso from VMWare website, and is looking to import it using the Update Manager so I can update the ESXi hosts, but I keep on getting the error:
File name: VMware-VIMSetup-all-5.1.0-799735.iso
Failed to transfer data
Error was: A web exception has occurred during file upload
I tried importing it by using vSphere client to connect to vCenter server both remotely and locally, with firewall disabled.
I've read http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026602
I've disabled firewall, and there is no anti-virus program on the server. I've also restarted the machine several times, to no avail, I didn't reinstall update manager because the whole Windows and VCenter installations are clean from scratch.
I logged into the vSphere Client using Active Directory credentials, and I've made all Domain Admins (which my account is a member of) part of the administrator group on the vCenter server. I can't log in using admin@System-Domain because it tells me I don't have permissions for it, I still haven't really had the chance to figure out why that is and not sure if that makes a difference.
Also, I'm fairly certain I'm using the right image file, as I've burned some DVD's used that image file to upgrade some other ESXi hosts. Unless there's a special image file I need to download?
I'm at lost on what I can do to make it work. Please advise.
Thanks.The ISO file you mentioned is the one for vCenter Server. What you need is the "VMware-VMvisor-Installer-5.1.0-799733.x86_64.iso" (or VMware-VMvisor-Installer-201210001-838463.x86_64.iso) for the ESXi host.
André -
I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Calculation Services 2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Web Access 6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local() --- End of inner exception stack trace --- at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings() at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList() at Microsoft.Office...
2.the event in event viewer is:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2014/10/10 9:49:43
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ***.net
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: ***
Account Domain: ***
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port: 63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4625</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12544</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
<EventRecordID>37602685</EventRecordID>
<Correlation />
<Execution ProcessID="532" ThreadID="26096" />
<Channel>Security</Channel>
<Computer>***.net</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="TargetUserSid">S-1-0-0</Data>
<Data Name="TargetUserName">***</Data>
<Data Name="TargetDomainName">***</Data>
<Data Name="Status">0xc000006d</Data>
<Data Name="FailureReason">%%2304</Data>
<Data Name="SubStatus">0x0</Data>
<Data Name="LogonType">3</Data>
<Data Name="LogonProcessName">
</Data>
<Data Name="AuthenticationPackageName">NTLM</Data>
<Data Name="WorkstationName">***</Data>
<Data Name="TransmittedServices">-</Data>
<Data Name="LmPackageName">-</Data>
<Data Name="KeyLength">0</Data>
<Data Name="ProcessId">0x0</Data>
<Data Name="ProcessName">-</Data>
<Data Name="IpAddress">***</Data>
<Data Name="IpPort">63664</Data>
</EventData>
</Event>Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support -
A critical error has occured. Processing of the service had to be terminate
When manager wants to approve the employee leave request its giving following error.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
at com.sap.xss.hr.lea.form.FcForm.getCustomizing(FcForm.java:1020)
at com.sap.xss.hr.lea.form.FcForm.onInit(FcForm.java:417)
at com.sap.xss.hr.lea.form.wdp.InternalFcForm.onInit(InternalFcForm.java:2053)
at com.sap.xss.hr.lea.form.FcFormInterface.onInit(FcFormInterface.java:184)
at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.onInit(InternalFcFormInterface.java:1911)
at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.onInit(InternalFcFormInterface.java:2007)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
at com.sap.xss.hr.lea.worklist.VcWorkList.onInit(VcWorkList.java:267)
at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkList.onInit(InternalVcWorkList.java:363)
at com.sap.xss.hr.lea.worklist.VcWorkListInterface.onInit(VcWorkListInterface.java:164)
at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface.onInit(InternalVcWorkListInterface.java:144)
at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface$External.onInit(InternalVcWorkListInterface.java:220)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Customizing_Get(LeaveRequestAdaptiveModel.java:392)
at com.sap.xss.hr.lea.model.Pt_Arq_Customizing_Get_Input.doExecute(Pt_Arq_Customizing_Get_Input.java:137)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
... 47 more
kindly help ASAP,Hi,
Did you give enough authorizations to the user at the beack end.
Just Try giving SAP_ALL authorizations and check.
Regards,
Santhosh -
Error Message: Sorry, a serious error has occurred that...
This seems to be a common problem, however, I have not found a fix. I am somewhat technologically savvy, but limited! Listed below are my specs and details to the problem.
Software- Premiere Pro (Version 5.03) Recently updated
OS- WIN7 Core 2 Duo CPU E8400 3.00GHz 4.00GB RAM
Footage used- all types
Error message text-
Sorry, a serious error has occurred that requires, Adobe Premiere Pro to shut down. We will attempt to save your project.
The problem-
When attempting to start PP it allows me to start a new project, select setting, and sequences. However, as the program begins to start up the new project the error pops up. The only option is to click ok, which in turn locks up the program.
Also any files that I have previous created also will not open properly.
Also, I have recently lost a drive that contained many of my old PP projects. I've read that some people have this problem when losing a drive that once related to possible PP preferences and scratch disks...once again I am limited on understanding how that all works.
I have restarted, cold boots, warm boots....clean uninstall, clean reinstall of PP and all components, updated chipset, display adaptor is up-to-date (NVIDIA GeForce 9300 GE) ...also I am an administrator of the workstation
**Through my many failed attempts from reading forums I have also at sometimes received a RunTime Error R6025 (pure virtual function call)
I have no 3rd party effects
not using Mecury to my knowledge.?Has it worked OK in the past? If so, try System Restore.
While your computer might meet Adobe's minimum requirements, it is way underpowered to run Premiere Pro properly.
See here:
http://forums.adobe.com/message/6336879#6336879 -
Error Message: Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.
Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
Does anyone have any idea what may be causing this issue and how to resolve it?
Thanks in advance for any suggestions.
By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link -
An error has occurred:Invalid postback or callback argument in InfoView
Hi Friends,
When i try to change the parameter values and click OK button while scheduling a report in InfoView, i am getting the following error:
An error has occurred:Invalid postback or callback argument. Event validation is enabled using in configuration or in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager. RegisterForEventValidation method in order to register the postback or callback data for validation.
Till now i have not find any good solution for this. Please help in providing any better solutions to fix this.
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AMThis forum is for questions in regards to using the SDK within a custom application, since you are using Infoview, please post this in the applicable forum under the [Business Objects|/community [original link is broken]; section
-
Hi,
I am deplyoing a solution which has custom web parts- vwp- appln pages, event receivers.
It was working fine till last week. I was able to deploy the solution and able to see the web parts and func. was working.
But now from the last 2 days onwards, when I tried to depoy this soution, I am getting the error
"Error occurred in deployment step 'Add Solution': A timeout has occurred while invoking commands in SharePoint host process "
may i know why am getting this error.
note: my dev machine- Win Srvr 2012 - VS 2012- SP 2013 - SP D 2013 was having soem issues with the space in C drive.
once i have done the index reset few months back and i started getting space in C:\ Drive is 0 bytes.
so what my infra. team has done is , increased the space in drive to 150 GB[ it was a VM ].
help is appreciated !What is current disk space on your drives
Delete ULS logs and other log files from server id not needed
could be related to ChannelOperationTimeout
http://msdn.microsoft.com/en-us/library/ee471440(v=vs.100).aspx
Also, don't forget to restart Visual Studio
Goto the following regustry key: HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\SharePointTools
Add the following as a DWORD (wont be there by default)
ChannelOperationTimeout
REG_DWORD that specifies the time, in seconds, that Visual Studio waits for a SharePoint command to execute. If the command does not execute in time, a SharePointConnectionException is thrown.
The default is 120 seconds.
http://social.technet.microsoft.com/wiki/contents/articles/21052.como-resolver-o-erro-error-occurred-in-deployment-step-activate-features-a-timeout-has-occurred-while-invoking-commands-in-sharepoint-host-process-pt-br.aspx
If this helped you resolve your issue, please mark it Answered -
Error 1 Error occurred in deployment step 'Activate Features': A timeout has occurred while invoking commands in SharePoint host process.
0 0 myProjectAssetsLists
am getting the above error when i deploy my farm solution which is actually a "farm solution import package" template.
i am deploying this to a new site collection and once its features are activated this will provision few doc libs and splists in the targeted site.
any help is appreciated.try below link:
http://msdn.microsoft.com/en-us/library/ee471440.aspx
http://sujeetrec.blogspot.in/2013/12/sharepoint-2010-deployment-timing-out.html
Increase the timeout that Visual Studio waits for SharePoint to deploy a feature:
Create: [HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\SharePointTools] ChannelOperationTimeout DWORD
The value is a timeout in seconds. The default is 120 (2 minutes).
Full details on this switch and others are here:
http://msdn.microsoft.com/en-us/library/ee471440.aspx -
A communication error has occurred while invoking commands in SharePoint host process
Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': A communication error has occurred while invoking commands in SharePoint host process: The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature
session shutdown or an internal server error.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]Hi Nimisha,
Seems that the original issue of communication error has been solved, for this new issue, it is recommended that you open a new thread which can make others easier
to focus on one issue in one single thread.
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?
Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.
-
An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...
urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard. no idea why i messed that up!
anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work. -
Photoshop CC 2014 - The file can not be saved in path because an error has occurred
Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
MichaelUpdate: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.
-
Can't view my user control in the designer (An Unhandled Exception has occurred)
I'm using VS 2012, looking at some code I wrote some time ago. For some reason I cannot view the XAML in the design view, only the XAML view. I'm getting an error that says, "An Unhandled Exception has occurred". I can compile the solution fine,
but it won't let me view it. I don't know why I can't view it in the designer. Here's the error details:
Microsoft.Expression.DesignHost.Isolation.Remoting.RemoteException
Object reference not set to an instance of an object.
at System.Windows.StyleHelper.FindNameInTemplateContent(DependencyObject container, String childName, FrameworkTemplate frameworkTemplate)
at System.Windows.TemplateNameScope.System.Windows.Markup.INameScope.FindName(String name)
at MS.Internal.Data.ElementObjectRef.GetObject(DependencyObject d, ObjectRefArgs args)
at MS.Internal.Data.ObjectRef.GetDataObject(DependencyObject d, ObjectRefArgs args)
at System.Windows.Data.BindingExpression.MS.Internal.Data.IDataBindEngineClient.VerifySourceReference(Boolean lastChance)
at MS.Internal.Data.DataBindEngine.Task.Run(Boolean lastChance)
at MS.Internal.Data.DataBindEngine.Run(Object arg)
at MS.Internal.Data.DataBindEngine.OnLayoutUpdated(Object sender, EventArgs e)
at System.Windows.ContextLayoutManager.fireLayoutUpdateEvent()
at System.Windows.ContextLayoutManager.UpdateLayout()
at System.Windows.UIElement.UpdateLayout()
at System.Windows.Interop.HwndSource.SetLayoutSize()
at System.Windows.Interop.HwndSource.set_RootVisualInternal(Visual value)
at System.Windows.Interop.HwndSource.set_RootVisual(Visual value)
at Microsoft.Expression.DesignHost.Isolation.Remoting.RemoteUIElement.<>c__DisplayClass12.<Microsoft.Expression.DesignHost.Isolation.Remoting.IRemoteUIElement.CreateContent>b__11()
at Microsoft.Expression.DesignHost.Isolation.Remoting.ThreadMarshaler.<>c__DisplayClass16`1.<MarshalIn>b__15()
at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.Call.InvokeWorker()
at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.Call.Invoke(Boolean waitingInExternalCall)
at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.InvokeCall(Call call)
at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.ProcessQueue(CallQueue queue)
at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.ProcessInboundAsyncQueue(Int32 identity)
at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.ProcessMessage(Int32 msg, IntPtr wParam, Boolean elevatedQuery, Boolean& handled)
at Microsoft.Expression.DesignHost.Isolation.Remoting.STAMarshaler.OnWindowMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at Microsoft.Expression.DesignHost.Isolation.Remoting.MessageOnlyHwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
at System.Windows.Threading.Dispatcher.Run()
at System.Windows.Application.RunDispatcher(Object ignore)
at System.Windows.Application.RunInternal(Window window)
at System.Windows.Application.Run(Window window)
at Microsoft.Expression.DesignHost.Isolation.IsolationProcess.RunApplication()
at Microsoft.Expression.DesignHost.Isolation.IsolationProcess.<>c__DisplayClass2.<Main>b__0()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
RodI stopped when I saw stuff about databinding.
I guess your problem is you have code in your constructor.
A prameterless constructor of a view will be called by the designer.
This is probably trying to use things which aren't there at design time.
You can mock them or just exit out the constructor if you're in the designer.
public YourUserControlConstructor()
InitializeComponent();
if (DesignerProperties.GetIsInDesignMode(this)
return;
// Dependent code which produces errors
http://social.technet.microsoft.com/wiki/contents/articles/29874.wpf-tips-designer-detection.aspx
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML
Maybe you are looking for
-
I want to show parts of web pages inside a table. How does one show html inside the cells of grids or forms?
-
I have installed the oracle9ias on linux 7.2. I start the EM web manager, and start other component in the component list. and I found that the 9127 port not open. how can i start the jms service. the rmi port is already open. thanks in advance.
-
trying to update from lion to mountain lion already purchased it but says its not available in us store help
-
Quick Viewer SQVI: how to switch to Technical Field Names on select screen?
Hi all, I have created in SQ01 a Quick view and want to see the technical field names (and not the descriptions) on the selection screen. In SE16 in the selection screen you go to -> Settings -> User parameters unter 'keywords' you find FIELD NAME /
-
Code alteration - Basic problem or XML-RPC?
I'm trying to alter the following client/server code to create an XML-RPC such that when the client offers an argument eg ?John? then the result of the method call returned to the client would be ?John*John? rather than the result of the equation cur