Has QT Error Plug In Problem Solved Yet?

I am still having problems streaming videos. Sometimes I get the error probem and other times I don't. Does ANYONE have a fix for this yet. Has either QT or IE admitted to the problem?
Tunney
Dell XPS 600 Windows XP Pro

When you looked in the /Library/Internet Plug-ins/ folder did you find the Real Player plug-in? You sort of failed to mention if it was there. Did you quit your browser and then re-open it?
Perhaps it did not get installed properly. It's also possible the website itself will only work if accessed from a Windows browser.
You may want to try this:
Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu. After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Similar Messages

TS3694 my iphone 4 has a error code (3002 code). what exactly of it mean and what should i do to solve this problem? thanks you

hi everyone. my name is joseph, i got the problem on my iphone 4 16GB BLACK. first time i did damage the battery connector and i have some store fix it for me, thaey actually sodered it and right now the iphone is not chargeable. the only thing i can do it to plug directly in the with the cable charger in other for the phone to bea able to use, but when i disconnect the cable, the phone is power off completely. right now al i can do is to connect to the itunes and try to restore it and its shown that my iphone has an error code which is (3002). i dont know whats mean and how to fix it. can anyone give my some suggestion what i mean to do? thanks you for your read

Also I've tried to reset it and it still keeps doing the same thing

I cant open my iphone 3g ,,,, needs restore and itunes cant make restore has an error... How can I solve this problem?

I cant open my iphone 3g .... needs restore and itunes cant make restore has an error on phone .... how can I solve this problem?

Are there any error numbers given by iTunes? If yes, solutions for those numbers can be fund in this article: http://support.apple.com/kb/TS1275 or this one http://support.apple.com/kb/TS3694

I cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

i cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

See this support document for information about update and restore errors. Resolve iOS update and restore errors

Undocumented problem solved with 16-bit pcmcia and irq error

I am having the exact same problem as described in the following post:
"Undocumented problem solved with 16-bit pcmcia and irq error."
"I'm using a DAQ Card (AI-16E-4), which didn't work properly in MAX. MAX complained that the card didn't respond to an interrupt request.
I've had this issue for a while, but dropped it, since NI support told me nothing could be done about it. Meanwhile, a seemingly unrelated problem with a wireless pcmcia network card arose. Cisco had no clue what was wrong with their card either, but I found Microsoft Knowledge Base Article Q327947. It seems that Win2k (they claim SP3 and up) disables ISA to PCI routing, which is what causes this problem.
To fix it, open regedit
and navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Pcmcia\Parameters"
edit or create the DWORD value "DisableIsaToPciRouting" and set the value data to 0.
See Microsoft's article for further details: http://support.microsoft.com/default. aspx?scid=kb;en-us;327947"
The difference is that I am using WinXP and the Regedit fix does not solve the problem. Does anybody know how he was able to continue to use the card before he solved the problem? The card works fine in MAX, but errors out in LabVIEW.

Hey Willy,
Here some additional suggestions that have corrected some PCMCIA difficulties in the past besides the registry edit you suggested.
1. General Troubleshooting to Verify Correct Hardware and Software Installation
Uninstall the PC Card hardware through Device Manager
Remove the PC Card from the laptop
Uninstall the NI-DAQ software
Follow the normal installation instructions (the most important step to remember for Plug-n-Play Operating Systems is to install the software first)
Try the latest service packs for Win 2000 or Win XP
Try the PC Card in a different laptop
Try a different slot in the laptop. On certain laptops PC Cards have been successfully installed in the top PCMCIA slot instead of the bottom.
2. Additional Troubleshootin
g for PC Cards that Return IRQ Conflicts
For E-Series DAQCards:
Update to NI-DAQ 6.9.3 first and then update NI-PAL to version 1.6.1 (included exe file).
Download the attached NI-PAL (ni-cdu1610.exe), and run the installer. When receiving the error "The device is not responding to the first IRQ Level" in Measurement and Automation Explorer, try this method of upgrading NI-PAL
3. Additional Troubleshooting Steps
Try disabling the 3COM adapter, and any other extraneous (for now) devices like any built in serial and parallel ports. The best way to do this is probably to disable them in the BIOS. If the PCMCIA card works properly then try to reconfigure disabled devices one at a time.
Make sure the latest BIOS is installed.
Check for any unusual PCMCIA drivers or other software that might interfere with the PCMCIA driver.
I hope this helps.
Ron
Applications Engineering
National Instruments
Attachments:
ni-cdu1610.exe ‏1557 KB

TS3694 hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regar

hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards

Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I s

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I subscribe to Adobe's Premium Support? Every time I've tried (through contact support) I just get taken on an unending loop.

I think we need a lot more information.
Exactly what does the message say?
Exactly what files are you trying to open?
Exactly how are you trying to open them (what menu command or button or mouse action or keyboard shortcut)?
And lastly, what version of Lightroom are you using?

HT201263 my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?

Hi,
my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?

Hi there hstear93,
You may find the information in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

I got an error message: 'iTunes has stopped working. A problem caused the program to stop working correctly. The solution asked me to load latest version which I did many times and still not working... HELP!

[Window Title]
Microsoft Windows
[Main Instruction]
iTunes has stopped working
[Content]
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
This is what I got... sorry, not very tech savvy to copy the error message onto here...
Have tried uninstalled and re-installed iTune, updated the new version of 10.6... many times over still not working!!!
I share the frustrations of many here. HELP!!!!!

Hi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

How to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

how to restore:
http://support.apple.com/kb/HT1414
error code 21 fix
http://support.apple.com/kb/TS3694#error1015

I just subscribed to IHome but when it tries to gather information about my music library, I get an error message that my Itunes is not responding and then it shuts down. Has anyone else had this problem?

I just subscribed to IHome but when it tries to gather information about my music library, I get an error message that my Itunes is not responding and then it shuts down. Has anyone else had this problem?

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."

Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.

Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium

HT1222 Every time I try to install an update for iTunes 11.0.2, I get an error message 103. Has anyone else had this problem and found a way to fix this?

Every time I try to install an update for iTunes 11.0.2, I get an error message 103. Has anyone else had this problem and found a way to fix this?

I did it the .dmg way alone and has problems with itunes crashing. This is a better way to ensure that there is not anything left behind to cause issues.
You need to backup your computer then uninstall I-tunes and reinstall itunes.
Delete iTunes
Deleting iTunes is not recommended unless you know what you’re doing.
Launch Terminal from the UTILITIES within Applications
Type the following commands:
cd /Applications/
This brings you into the Applications directory, the next command deletes iTunes itself:
sudo rm -rf iTunes.app/
Enter the Administrator password to confirm
There is no warning or confirmation other than entering the admin password, iTunes will immediately be deleted, effectively uninstalling it from the Mac.
Deleting the iTunes application will NOT delete the ITUNES or music, and any purchases bought through iTunes will still remain tied to the Apple ID used to originally buy them.
You can download the newest version from Apple, and running their installer will bring iTunes back to life on your computer.
http://www.apple.com/itunes/download/

Has QT Error Plug In Problem Solved Yet?

Similar Messages

Maybe you are looking for