Has something changed with Static Files?

Here is a static file I uploaded last year:
http://apex.oracle.com/pls/otn/wwv_flow_file_mgr.get_file?p_security_group_id=563610923303911988&p_fname=AskExpert.zip&p_inline=NO
It can be downloaded by anyone.
Here's one I uploaded this week:
http://apex.oracle.com/pls/otn/wwv_flow_file_mgr.get_file?p_security_group_id=563610923303911988&p_fname=f107_TL.sql&p_inline=NO
It gives an "Access Denied" message unless downloaded from a link in an application,
or if the browser has been logged into the Application Builder.
The links above are from the floppy disk icons on the Static Files page. (4000:40)
I don't think I did anything different when I uploaded the files.
Some new security must be applied when the files are uploaded now.
Is this the correct new behavior?
It's probably not normal to use Static Files outside of Apex, but I have used them in the past to share files on this forum.
Thanks,
Doug

I downloaded the file, renamed it, and uploaded it again.
It is publicly downloadable:
http://apex.oracle.com/pls/otn/wwv_flow_file_mgr.get_file?p_security_group_id=563610923303911988&p_fname=f107_TL2.sql&p_inline=NO
while the original still is not:
http://apex.oracle.com/pls/otn/wwv_flow_file_mgr.get_file?p_security_group_id=563610923303911988&p_fname=f107_TL.sql&p_inline=NO
I guess that shows that Static Files are still working as always,
but perhaps something funny happened to the first one.
Good enough.
Thanks for looking into it.
Doug
To finish beating this dead horse, I guess I could install an application from the renamed file and see what happens to the static file.
But I probably will not.

Similar Messages

'User did not respond' - Has something changed with ichat?

This seems to be an issue for nearly everyone. I have been using ichat video succesfully for over a year now. For some reason, in the last month or so, the video has stopped working on all three of my macs (powerbook G4 Tit, new mbpro, and imac g5 at home)
From my tibook (10.3.9)...I can sucessfully connect to the apple test video without problem. The person I am trying to videochat with can also connect to the same apple test video with no problem. However, we cannot chat with video OR audio with each other.
I have done a bandwidth test, and I am on a 1.5 T1. I am behind a company NAT (cisco 1700 router, Novell server handling the nat/pat) He is in LA and has succesfully be chatting with people on the east coast, so I don't think he is the issue.
Here is the log from the connection doctor:
2006-05-16 09:33:45 -0700: REMOTE USER NAME HERE did not respond.
Tried to send UDP SIP "invite" to the following IP addresses and ports:
69.229.11.215:5060, 192.168.15.100:5060, 172.16.1.35:5060
2006-05-16 09:40:51 -0700: REMOTE USER NAME HERE did not respond.
Tried to send UDP SIP "invite" to the following IP addresses and ports:
69.229.11.215:5060, 192.168.15.100:5060, 172.16.1.35:5060
2006-05-16 09:47:26 -0700: REMOTE USER NAME HERE did not respond.
Tried to send UDP SIP "invite" to the following IP addresses and ports:
69.229.11.215:5060, 192.168.15.100:5060, 172.16.1.35:5060
2006-05-16 09:53:33 -0700: REMOTE USER NAME HERE did not respond.
Tried to send UDP SIP "invite" to the following IP addresses and ports:
69.229.11.215:5060, 192.168.15.100:5060, 172.16.1.35:5060
As it has been for nearly everyone else on the list, I am extremely frustrated. I have never had an issue using ichat, but now I can't get it to work from anywhere. I have been able to get everyone in my family to switch to imacs so they can chat with my kids....and now we can't get it to work at all.
What am I missing? I find it hard to believe that this is so hard to use that so many people are not able to use it.
Any help or new suggestions would be most appreciated.
sqe

I'm new to Macs and bought a MacBook Pro for myself and partner mostly for the iChat AV feature. Neadless to say, I'm frustrated beyond belief. I've spent over 25 hours trying to get it to work to no avail.
Each of us can connect with the Apple test buddies with no problem. We can't connect with each other though, except for two times that it actually worked.
I've troubleshooted everything I can think of. I've called my ISP (Verizon), Netgear (my wireless router), and just this morning I called Apple. I was at work so, I'll have to call them back when I get home but they don't seem to even know about the problem. Which is astonishing considering how many people are reporting this on the forum.
I can connect to anyone while on my office wi-fi but only to the Apple test buddies when at home. That's why I called my ISP and Netgear. I took the router out of the picture and still had the same problem at home.
It makes no sense that the Apple test buddies do work but not real people.

Gmail to Macmail - Has something changed in last 4 days?

I use Gmail for my mail. In the last 4 days Emails from one of my customers are coming into my MacMail with only the subject line showing up but the body of the email is blank except for the company logo. These emails have been showing up fine for the last 3 years. If I go directly to my Gmail acount the message is there with all the information. Has something change? I have contacted the customer and nothing has changed on their end and since it shows up in Gmail I would think it is on Macmail's end. Has anyone else had this issue?

Try Rebuild:
Select the mailbox with the problem emails, then click Mailbox in the menu bar and select Rebuild.

I am suddenly being asked to enter my apple id and password on my iPad, running iOS 6.1.3, has something changed?

I am suddenly being asked to enter my apple id and password on my iPad, running iOS 6.1.3, has something changed?

This is normal when downloading app or purchasing music, books etc. what are you doing when you are asked for the Apple ID and password?
Perhaps you signed out of your Apple ID in Settings. sign back in.

Former Employee Obtained access to Administrator Account somehow and has been messing with roles, files ect... Just a question...

Ok, so about six months ago, my company let go of their Systems Administrator because she was causing many problems in the workplace... Yesterday morning i logged onto the server and found several files open with her name on them, including her confidentiality
agreement, and Employment offer letter, as well as the confidential folder that holds all employees personal identity information (she remote into the Server about 10 Minutes before i logged in, thus kicking her off not allowing her to close what she was opening/copying.
I attempted to check the logs to see what IP she was connecting with but was only able to find the following:
She remoted into the server about through Remote Desktop about 20 times on the 27th of May 2014, (horrible weather and she was probably logging in in a McDonald's Wifi and it kept kicking her off).
I took the day off because my area was flooded and couldnt make it to work.
She logged on, on the 28th of May, 2014 about 16 times before i logged on kicking her off, leaving everything she was doing open for me to see.
Everytime i remote into the server from my house or the office i get the following...
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TerminalServices-RemoteConnectionManager" Guid="{C76BAA63-AE81-421C-B425-340B4B24157F}"
/>
<EventID>1149</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x1000000000000000</Keywords>
<TimeCreated
SystemTime="2014-05-28T03:24:49.860045100Z" />
<EventRecordID>1943</EventRecordID>
<Correlation
/>
<Execution ProcessID="3884" ThreadID="3868" />
<Channel>Microsoft-Windows-TerminalServices-RemoteConnectionManager/Operational</Channel>
<Computer>Servername.server.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<EventXML xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS">
<Param1>Administrator</Param1>
<Param2>ServerName</Param2>
<Param3>IP.IP.IP.IP</Param3>
</EventXML>
</UserData>
</Event>
when she would log in, there was no IP address everytime except the first time she logged in it seems, and looks like the following.. The first time she logged in remotley I have an IP address that seems to belong to a McDonalds using AT&T wifi,
and was able to trace it to the center of town, and get a Longitude/Latitude...
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TerminalServices-RemoteConnectionManager" Guid="{C76BAA63-AE81-421C-B425-340B4B24157F}"
/>
<EventID>261</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x1000000000000000</Keywords>
<TimeCreated
SystemTime="2014-05-28T17:25:03.210845100Z" />
<EventRecordID>1969</EventRecordID>
<Correlation
/>
<Execution ProcessID="3884" ThreadID="4224" />
<Channel>Microsoft-Windows-TerminalServices-RemoteConnectionManager/Operational</Channel>
<Computer>Servername.Server.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<EventXML xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS">
<listenerName>RDP-Tcp</listenerName>
</EventXML>
</UserData>
</Event>
As you can see no IP address is shown unlike everyone other PC that remotes into the server... She has been using our server as her personal file host for her real estate business, she was fired last year for sabotaging AutoCad drawings her ex boyfriend
was working on (they are back together and was the one she set up with full access to server) and she has been adding and modifying files in her group drive via the administrator account. She also disabled several roles we had installed, and gave her
boyfriend (who happens to work at the company) More administrator right than myself, as I built the server from ground up, and Only the Company owners had access to remote desktop, besides the administrator account... I want to make sure she didn't create
any hidden accounts that she can still log into.. I found under ADSI Edit Under Domain Controllers, Subscription Properties an account (servername$) which doesn't not show up in active directory, but had full access to everything... Is there a way to uncover
hidden Accounts she may have created to get into the server, as I've know from previous experiences, that $ sign normally refers to a hidden account or file of some sort.. Any help with this would be greatly appreciated, The FBI is currently investigating
the situation, but i am trying to make sure all my basis are covered so this doesn't happen again... Thank you for taking the time to read my long ass thread, I will bestow upon you great fortune and Karma for any help given =-D

Hello,
the $ behind the machine name object is normal.
For security related questions please use
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserversecurity
Also I would immediately remove all people form any kind of administrative groups, MUST of course be agreed from the company owner, then change the administrator account password. If there is a need for the additional administrators the company chief
has to agree on this and there should also be made some clear rules, maybe from a lawyer about consequences etc. Remote access to the network should be blocked or made more secure with two factor authentication, tokens for example, just using Remote Desktop
at the moment I would not allow until the network is better secured and you can be sure there are no unknown administrative accounts.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Has something changed in the Arch Installation?

I've seem to run across a few things when I install Arch now. I've installed Arch many times on the exact same computer with the exact same hardware but I'm experiencing some issues. I always use the FTP install.
First, I have no colors anymore when I edit anything in nano (after the installation). Why is that? All i have is a completely fresh install, but no colors. That never used to happen. I haven't changed anything.
Second, even though I select during the install which mirror i would like to keep as my 1st mirror, pacman -Syu will not work. I have to go into into the mirrorlist file and uncomment a mirror. Now that is not a problem at all, but why has that changed?
On top of those things, I have problems now getting GDM to load my xfce4 session, and even without GDM, I can only load xfce4 thru the root login, not my own, and when I install ttf-ms-fonts, i get a error that says the package has different permissions than the /tmp directory, which has never happened before. I think the GDM thing is also a permissions problem for some reason.
But why oh why has Arch changed on me?! Help!

Nano syntax highlighting is now stored in /usr/share/nano.
I added the following lines to /etc/nanorc:
## Arch PKGBUILD
include "/usr/share/nano/pkgbuild.nanorc"
## Syntax highlighting in xorg.conf
include "/usr/share/nano/xorg.nanorc"
## Generic conf/rc/sh file syntax highlighting
include "/usr/share/nano/conf.nanorc"
Here are the 3 Arch files I created:
cat /usr/share/nano/conf.nanorc
# Generic conf/rc/sh file syntax highlighting
syntax "conf/rc/sh" "conf$|rc$|sh$"
color white ".+"
color green "^#.*"
cat /usr/share/nano/pkgbuild.nanorc
## Arch PKGBUILD files
syntax "pkgbuild" "^.*PKGBUILD$"
color green start="^" end="$"
color cyan "^.*(pkgname|pkgver|pkgrel|pkgdesc|force|url|license|install|source|md5sums|groups|backup|depends|makedepends|conflicts|provides|replaces).*=.*$"
color brightcyan "\<(pkgname|pkgver|pkgrel|pkgdesc|force|url|license|install|source|md5sums|groups|backup|depends|makedepends|conflicts|provides|replaces)\>"
color cyan "\.install"
color brightwhite "=" "'" "$" "$" "\"" "#.*$" "\," "\{" "\}"
color brightcyan "(\$|\$\{|\$$)(pkgname|pkgver|pkgrel|pkgdesc|force|url|license|install|source|md5sums|groups|backup|depends|makedepends|conflicts|provides|replaces|startdir)(|\}|$)"
color brightred "build"
color brightred "\<(configure|make)\>"
color red "\<(DESTDIR|PREFIX|prefix|sysconfdir|datadir|libdir|includedir|mandir)\>"
cat /usr/share/nano/xorg.nanorc
## syntax highlighting in xorg.conf
syntax "xorg" "xorg\.conf$"
color brightwhite "(Section|EndSection|Sub[sS]ection|EndSub[sS]ection)"
# keywords
color yellow "[^A-Za-z0-9](Identifier|Screen|InputDevice|Option|RightOf|LeftOf|Driver|RgbPath|FontPath|ModulePath|Load|VendorName|ModelName|BoardName|BusID|Device|Monitor|DefaultDepth|View[pP]ort|Depth|Virtual|Modes|Mode|DefaultColorDepth|Modeline|\+vsync|\+hsync|HorizSync|VertRefresh)[^A-Za-z0-9]"
# numbers
color magenta "[0-9]"
# strings
color green ""(\\.|[^\"])*""
# comments
color white "#.*"

Has something happened with drag n drop in ff11?

Ok, since ive updated to ff11, drag n drop with images no longer seems to work. before when i went onto google images to find images i was able to just drag an image into the page and of it goes, but now whenever i try it the cursor just become and black circle with a line through it signifying that that cant be done. Has something happened to the drag n drop feature from before the ff11 release, i was able to do it fine then???
Anyhelp?

No, i dont use skype click-to-call, never heard of it.
Before i upgraded, i was able to go onto images.google.com then go into the My Pictures folder click and drag an image from that folder onto firefox to make google images become the top window then continue to drag to the search box to make the window show saying "drop image here" the drop it and it searches for that image. No MS Office apps involved.
*Update* while writing this message and going through the steps my self to give as much detail as possible, ff now allowed me to drop an image into google images to search for it, so it appears the prob has fixed itself? I do not know why it now works as opposed to the other day, as far as i am aware, nothing has changed. I only updated to ff11 the other day after i found out that avg link scanner was now compatible with ff11 and was going to downgrade ff to the previous version so that drag n drop would work again so it appears i may now not have to. I will keep this open for the next few days in case drag n drop stops working again which will save me having to re-create this post.

I have been unable to connect to Mozilla for 2 days now. Has something changed or is there a problem on foxfire side?

Nothing has changed with my computer and I use Foxfire daily. When I try to access the site I get the error screen that it cannot connect.

* Can you connect to other sites ?
* Did you try the links James provided above ?
** what happens if you type into the location bar http://mozilla.org/ and click on the green arrow ?
* Try clicking on the link I provide (it says ''post'' in blue) does that work ? <br/> or are you not able to open anything in Firefox? <br/> what about files saved on your local computer do they open ?
Possibly you have some sort of malware, or at least some searchbar that you are not expecting, see also this [https://support.mozilla.com/en-US/questions/755914#answer-132468 post] suggesting:
''Close Firefoz and open c:\program files\imesh applications folder
if you see any uninstall.exe program, run it;
then remove datamngr and media bar from firefox add-ons.
if still you see that lovely page (search.imesh.com), then remove data manager and media bar folders from imesh folder. ''

I cannot find my recent music purchases in my library. Has something changed?

Hi, I have recently purchased some new songs but can not seem to find them under my regular library. Has something recently changed? I keep dowloading it but still doesnt show in my library.

Sort your library by Date Added, and the newest addtions will appear at the top.
Make sure the search oval is empty, and if you are using Column Browser, make sure that "All" is highlighted in each column. Either of these can prevent items from showing in Music view.

Did something change with IOS6 and photo stream

Seems photo stream stopped working with IOS6, did something change?

I'm having this same issue, and after ruling out other possible factors limiting iCloud backup, I've concluded that the issue IS in fact the Xfinity Arris TG862 (Comcast wireless router). There is a section on Comcast's website that aknowledges a software issue with the router, and a software update will be pushed out at some point, but if you don't want to wait, you can request to have your router replaced, for free. Visit http://mydeviceinfo.comcast.net to see a full list of devices, then find your device, and if the text is in red (which would currently be the Arris TG852 and TG862 models), then you can either wait for a software fix, or request a new router at http://forums.comcast.com/t5/Connectivity-and-Modem-Help/bd-p/5
Hope I could help!

Scheduled time has been changing with out specifing

i have submitted a job using dbms_job.submit(v_JobNum,v_command,null,null);.
but when the scheduled time is reached, the job is not getting execute,instead it's time has been changed to next 5 min for every time, which leads the job should not got execute.
what will i do??
Thanks & Regards,
Rajesh.P

I suspect that your job is failing.
Query user_jobs for the failures column. If this is non-zero, then you know your job is failing, and being retried.
I forget what the limit is, but basically the job will be retried several times, and when it reaches the limit of retry-attempts, it will mark the job as broken (see the broken column).
If this is the case for you, you need to examine what the job is running to see why it might be failing.

I can't figure out my ringtones anymore,has something changed on itunes i don't see the symbol in my music to let me know which song i can use as ringtones?

i can't figure out my ringtones anymore has it changes and i don't know about it?

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Has something changed in Podcast App this last week?

I'm running iOS 6.1.3, Podcast's version is 1.2.1.
I think within this past week I've lost the progress bar in my podcasts (time slider).
Did I unconciously change a setting, or has a change happened to the App recently?

Scratch that. It looks as if I finally got the interface change that happened a bit ago.
Tapped the album artwork, there it was hiding.

Recently my PDF files have printed too dark. Has something changed in the software?

Why do my PDF files print too dark?

2many2cho0se wrote:
Yes...I know iMessage is supposed to be where there is wifi...
Actually, all iMessage requires is a data connection, & that data connection can be either WiFi or 3G.

[Solved] How to save changes with PDF files

Hello
I have pdf files which contain forms. The only issue is that I cannot save the changes I do with evince. Anyone has a solution ? Thanks in advance
Last edited by tamikana (2010-04-23 17:42:52)

this thread has some tips:
http://bbs.archlinux.org/viewtopic.php?id=52084
not sure if they mention it, but xournal may also kind of work (annotates pdfs by turning them into an image, basically)

Has something changed with Static Files?

Similar Messages

Maybe you are looking for