Has the width and colour of the graduated filter changed in Lightroom 5.4?

Hi,
Has the width and colour of the graduated filter changed in Lightroom 5.4? The 3 lines seem to be too narrow, almost a hairline, and not white enough. I can barely see them on a calibrated monitor and did not have that problem before upgrading to Lightroom 5.4.
Thanks for your help.
Kind regards,

Ok, je vois où pourrait se situer le problème....
Il faut baisser la luminosité de cet écran, le mieux est de mettre la luminosité à 50% et de calibrer cet écran avec une sonde, par exemple une Syder4pro ou une autre !
OK, I see where could be the problem...Lower the brightness of the screen, the better is the brightness to 50% and to calibrate this monitor with a probe, for example a Syder4pro or another!
Best regards
Yves/CH

Similar Messages

  • How to change the width and height of the visible part of the of the report

    I have define a report with paper size 'Letter', orientation 'landscape' and 30 columns. Dynamically I am changing width of columns and suppressing many columns of the report.
    Mostly using first 16-20 columns and others get suppressed.
    Now problem is that when navigating the report thru crystal viewer, a huge blank spaces getting display on right of the report. When we take jump to some part of report thru navigation tree, the whole report gets shifted to left and only blank part is visible and it is required to scroll left.
    Even printing is not working correctly.
    Is there any way to change the width and height of the visible part of the report in the viewer thru .net classes? Setting the width and height of the report in Load event handler doesn't help.  
    Example: CrystalReportViewer1.Width = 200; - is not helping.
    Is there any other solution?
    Please let me know.
    Thanks
    Mahesh Patel

    Hi Yogesh,
    Your suggestion 'reportDocument.PrintOptions.PaperSize=PaperSize.PaperLedger;' along with 'PaperOrientation' setting as follow works fine. I tried to switch between Landscape and Portrait depending on report width.
    reportDocument.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
    But problem with crystal viewer remain as it is.
    While navigating report thru crystal viewer, when we take jump to some part of report thru navigation tree, the whole report gets shifted to left and it is required to scroll left.
    Thanks for your very good suggestion.
    Mahesh Patel

  • How to set the width and heigh in the popup window

    Hi All,
    I tried to show a report in a popup window style.
    In the column link section, I defined the URL like the following:
    javascript:popupURL('f?p=&APP_ID.:128:&SESSION.::&DEBUG.::P128_PAY_RATE,P128_PAY_TERMS:#PAY_RATE#,#PAY_TERMS#'). how and where to set the height and width for page 128?
    Thank you,
    spark

    Here is a sample of the JavaScript function I re-use that opens a popup window. You'll notice that it includes the width and height of the popup window:
      function callTCPopup (formItem1) {
        var formVal1 = formItem1;
         var url;
      url = 'f?p=&APP_ID.:1111:&APP_SESSION.::::P1111_TC_ID:' + formVal1;
      w = open(url,"winLov","Scrollbars=1,resizable=1,width=800,height=600");
      if (w.opener == null)
      w.opener = self;
      w.focus();
      }You could also look at using a Modal Page (Skillbuilders' plugin - watch the video for use).

  • How to get the width and height of the selected rectangle

    Hi,
         I need to get the width and height of the selected rectangle in indesign cs3 and display the values in a dialog box for user verification.
    Regards,
    saran

    Hi Saran,
    InterfacePtr<IGeometry> itemGeo ( objectUIDRef, UseDefaultIID() );
    PMRect ItemCoord = itemGeo->GetStrokeBoundingBox();
    PMReal width  = ItemCoord->Width();
    PMReal height = ItemCoord->Height();

  • How to change the font and colour of the PL/SQL Editor in forms

    Hi All,
    I am fed of viewing the small fonts in the PL/SQL Editor. I am feeling stress
    in my eyes daily...Please any body help me how to change the color and font
    of the PL./SQL editor in oracle forms 6i..Thanks in Advance...

    Hi
    Thanks for the reply..
    But I personally feel that Oracle people should have done this since
    any editor should allow us to change the font and colour...any way lets
    hope that in the future releases that may happen...
    Raghu

  • How can I change the width and color of the title bar of the JFrame

    I would like to use the UImanager to change the look and feel of the title bar on all of my JFrames. How is this possible.
    Thanks in advance.

    I appologize for being rude, and thank you for your response.
    The reason I did not respond was that I don't think that your answer solves the question of top level containers (specifically JFrame). I have been researching the net and some of the text books to come up with an answer before I respond. To this point, I believe that the answer has something to do with changing the boundary. If this is the case I'm within four or five hours of the solution, and will publish. If not, back to the drawing board.

  • How to set the width and height of the displayed image in a button

    How can I please specify the size of the image that I display in a button which I create dynamically.
                HtmlCommandButton button = new HtmlCommandButton();
                button.setImage(image.getUrl());Thanks in advance
    Message was edited by:
    WebService

    Follow some CSS tutorials to learn more about it.
    Here is a page with some links: http://www.google.com/search?q=css+tutorial
    Then you're doing or interpreting something wrong. The methods are actually there. I can play with them in my playground and they are also described in the the HtmlCommandButton API: http://java.sun.com/javaee/javaserverfaces/1.2/docs/api/javax/faces/component/html/HtmlCommandButton.html

  • Please help me :How to set the width and height for my View page "test.htm"

    Hi,
        I have controller class. When i call the view[test.htm]from this controller class ,i am getting the view with output tableview..it is fine.
    My requirement:
                 the output view window is showing full browser window. I want the view output like showModeldialog. I want to set the width and height for the output view window. How is possible?
                 or
    i want to call the test.view in the window.showModelDialog..
    Please help me .. Urgent requirement.

    Yes you can set the width & Height of the view as follows..
    <div style="width:580px; height:750px; margin-top:15px; overflow:auto;">
    <htmb:form......>
    </htmlb:form>
    </div>
    <i>*Reward each useful answer</i>
    Raja T

  • I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the one PSD files by distorting the images and colour. Does anyone know how to recover the original images?

    I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the open PSD files by distorting the images and colour. They are now completely unrecognisable and unusable. Does anyone know how to recover the original images as I was saving them as I went along but the files are now corrupt?

    What version of Photoshop are you running?
    I've seen a couple of instances over the last week or two where Photoshop has added masks, strange colours and also merged content from two separate PSD files that were open at the same time.
    This has occurred on two different iMacs, (both 10.10.x) running Photoshop CC 2014.2.2 (20141204.r.310 x64).
    see image below for example:

  • How do I save the width and height of a photo for repeated use?

    How do I save the width and height of a picture for repeated use, rather than having to enter it each time in the 'new file' box?
    Thanks,  Ed Jackson.

    It could be that I'm older and have forgotten. I'm now 73 and will admit I have forgotten many things over the years. I have been using Photoshop since Photoshop version 3.  And can not really recall which features or changes were made in ever version of Photoshop I have installed.  Adobe has added many features over the years. The number of bugs introduce has also greatly increased after CS3.  "New Doc Sizes.psp"  in your user id preferences is edited using the two buttons in the new document dialog.
    As for guide lines in new documents Photoshop CS6 or CC seem to add some for video file presets with guide lines.  I do not know how to edit or add guide line to new doc presets. Guide line actions are easy to create. I have also seem some guideline in new documents when I did not expect any perhaps a new bug. Photoshop like most software has bugs. If you do not see Adobe new presets perhaps you copied an old  "New Doc Sizes.psp"  over Adobe's newer default file or Adobe migrared you presets and wand wiped their presets out. There are bugs. Close Photoshop down and rename your current  "New Doc Sizes.psp"  in you user id Photoshop cc preferences folder and start Photoshop it will add a dedault  "New Doc Sizes.psp"  file see if you see Adobe new presets in the new doc pull down when you select video and film...

  • Change the width and height of Landscape Layout for a report in 10G

    Hi,
    I'm new to reports and when i built the report in report builder 10g, the layout orientation was 'Landscape', hence I assumed that it'll be a landscape layout.
    However, the width and height fields of the main section are 11 and 20 respectively. However, the height should ideally be 8.5. When i try to change it I get the following error message :
    Layout canvas must remain large enough to fit layout objects.
    Could you please tell me how to change the height of this landscape layout to 8.5 from 20.
    The report has several main frames within a repeating frame, since the same report has to run multiple times.
    Is it possible to have a repeating page across pages (crossing the horizontal margin) and hence have some of the main frames move down to the next page. I'm trying to do this to then be able to reduce the height of the main section of the report to 8.5. Its not working though because I'm getting the following error :
    REP 1814 : Report cannot be formatted. Object "vertically" can never fit R_Main (the name of the repeating frame enclosing all objects)
    Thanks,
    Priyanka

    To reduce the Hieght, first make the layout design fit into the new value..

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • I need to write a Java script to make my Art board bigger by 1 (one) inch on the Width and Length, Regardless of the Content?

    Hi,
    I am currently using "Visible bounds" (java script)to add 1 inch to the width and to the Length of my Art board, but when i make a clipping mask it actually reads the hidden content from the Clipping mask and makes conforms my art board to that particular shape. Am using Adobe illustrator cs6 Here is My Code:
    var myDocs = app.documents;
    var i = 0;
    for (i = myDocs.length-1 ; i >= 0; i--)
        var doc = myDocs[i];
        app.activeDocument= doc;
        var myVisibleBounds = doc.visibleBounds; //Rect, which is an array;
        myVisibleBounds[0] -= 36;
        myVisibleBounds[1] += 36;
        myVisibleBounds[2] += 36;
        myVisibleBounds[3] -= 36;
        doc.artboards[0].artboardRect = myVisibleBounds;
    All i Want is to add 1 inch to my width and length and this does it but if i have a clipping mask it will pick up the bounding box i guess? and it will conform it to the shape... any help please... Try my code and you will see that it does add 1 inch but now make you artboard lest say 12" x 12" and make a shape bigger than the art board and you will see how it adds 1 inch to the art board based on that shape...  now if you make a clipping mask to fit that shape in the 12" x 12" art board you will still get 1 inch bigger than the shape thats being clipped ... 

    yes, visible bounds is reading the non-visible masked objects too.
    you're going to have to do it the hard way, loop through all your objects to get your bounds manually, and while you're at it, test for clipping masks and use the masking path instead.

  • My Facetime has always worked and now all the sudden when I try to log on from my Macbook it says the server has encountered an error with the server registration. This will not allow me to sign in. Anyone know how to fix this?

    My Facetime will not work on my Macbook Pro. This has always worked in the past and now all the sudden it says that I have encountered a problem with the server and registration. I tried to check the date and time zone which is correct and I have no restrictions set.

    I have the same issue. Does anybody know why this has happened

  • I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message.  Cannot access app store or do updates.

    I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message.  Cannot access app store or do updates.

    In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....

Maybe you are looking for