Has there been any solution to the stuttering HD with netflix?

I have my q150 hooked up through the ethernet, speeds 8mbps down and 1 up and the HD stutters like mad.  Any possible solutions.

Weird. I haven't run into that but will watch for it.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Similar Messages

  • Has there been any helpful remedy for the ghost typing issue?

    Has there been any helpful remedy for the ghost typing issue? Where the ipad starts typing on its own and screens moving around the screen?
    I have had the ipad 1 for a while- and it started about 5 months ago. Anything other than shutting down and leaving alone for hours work?

    Yeah, well if you read that whole thread you will see lots of posts identifying it as a hardware problem:
    I'm the original poster on this thread. I ended up taking my iPad back to the Apple Store. They ran some diagnostics, and found that my RAM was almost maxed out, which didn't really make sense. It indicated a faulty processor, so they gave me a new iPad. I took it home, synched, and it only took about 45 minutes to synch 30 gigs of data. My original iPad took about 5 hours to synch for the first time. Clearly there was a problem with the processor in the first one, but I didn't realize it at first, as it took several weeks before it started exhibiting the erratic screen behavior. Hope this helps anyone else who might experience this down the line.
    -merenvov
    So i went to my apple store... which was PACKED. Found a manager and explained my problem. Without any question, they simply replaced it. Awesome!
    -duncanwilcox
    I have the same problem, and I found out what's wrong, it's not the software - restart, restore and FW upgrade will not help, it's definitely hardware. The best option is to replace your iPad assuming you have an apple store nearby…
    -DarkDwarf
    Just get your iPad replaced. It has a hardware problem.

  • Has there been any problems with the mail server?

    Has there been any problems with the mail server? I keep getting a notice of server failure.

    Unfortunately the error message does not identify the specific server, I (as many folks do) have several, Mac, yahoo, google ect.

  • Has there been any fix to Aiport Express Scanning Issues?

    I have my HP printer/scanner hooked in to (by usb) to an airport express. I knew about a year ago that you weren't able to scan with this configuration. Has there been any workaround to this problem?
    Thanks..

    Has there been any workaround to this problem?
    The only workaround remains to connect your printer/scanner directly to your computer.
    Since It is HP that must supply the correct sofware drivers for this functionality to work on the AirPorts, you might want to contact HP to ask them about their future plans in this regard.
    I suppose that it could not hurt to remind Apple that you would like to see this type of functionality as well.
    Apple - AirPort Express - Feedback

  • Has there been a resolution to the wake up issue created by upgrading to OSX Lion?

    Since upgrading to OSX Lion my iMac will not wakeup. Has there been any resolution to this problem?

    This is a problem with your computer and system, not with Lion. I suggest you do the following:
    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
    Because the Lion volume will be erased I recommend you first backup your files so they can be restored after reinstalling Lion.

  • I have a 2005 Jaguar xj8.  When I tried to upgrade my 3gs to a 4g I got a ticking noise in the speaker and no one on the other end could hear me.  I had to go back to a 3gs.  My phone is shot and I need to upgrade.  Has there been a fix to the problem?

    I have a 2005 Jaguar xj8.  When I tried to upgrade my 3gs to a 4g  two years ago, I got a ticking noise in the speaker and no one on the other end could hear me.  I had to go back to a 3gs.  My phone is shot and I need to upgrade.  Has there been a fix to the problem?  Apple told me there was some sort of interference with the airbag system.  Jaguar was totally unhelpful.

    Hi Labjock,
    Welcome to the Support Communities!
    The article below may be able to help you with this. 
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Cheers,
    - Judy

  • Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone?   I'm looking for some that glow or light up so they can be seen when I walk in the dark.

    Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone?   I'm looking for some that glow or light up so they can be seen when I walk in the dark.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • Encore CS5.1 and DTS sound for BluRay: Has there been any success

    I have not updated to the latest version (can't afford at the moment) but I would really like to know if there have been any improvements in the DTS sound file handling.
    In CS5 you can NOT create a BluRay disk with dts sound. dtshd (using DTS MasterAudioSuite) are not accepted at all and .cpt files are accepted but can only be used for DVD projects (when trying to create a BD project with .cpt you can an error of file not valid for BluRay).
    Has something changed in newer version?
    I would be really interested to know about this.
    Thanks in advance

    Ok, ladies & gentlemen, let's see what's going on here.
    First of all I would like to thank my friend George from a London based studio who was kind enough to help me with his professional DTS MA suite encoder
    Here is a zipped file which contains two dts .cpt audio files
    https://www.yousendit.com/download/MEtUbUpSSU9xRTJ4dnc9PQ
    1) The one is star754.cpt
    DTS stream tools gives this info in verification
    Num Channels = 2
    Sample Rate = 48000
    Lossy Encode
    Samples per frame: 512
    Core FSIZE (bytes):     1006
    Core Bitrate (kbps):     754
    ****** End of input bit stream ******
    1875 out of 1875 frames verified successfully
    Stream passes verification with no errors.
    and mediainfo gives this
    General
    Complete name                    : V:\Temp\star754.cpt
    Format                           : DTS
    Format/Info                      : Digital Theater Systems
    File size                        : 1.80 MiB
    Duration                         : 20s 0ms
    Overall bit rate                 : 755 Kbps
    Audio
    Format                           : DTS
    Format/Info                      : Digital Theater Systems
    Duration                         : 20s 0ms
    Bit rate mode                    : Constant
    Bit rate                         : 755 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : Front: L R
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Compression mode                 : Lossy
    Stream size                      : 1.80 MiB (100%)
    This file is OK when building  blu ray projects. No problem
    2) The second file is star1509.cpt
    DTS stream tools gives this info in verification
    Num Channels = 2
    Sample Rate = 48000
    Lossy Encode
    Samples per frame: 512
    Core FSIZE (bytes):     2013
    Core Bitrate (kbps):     1509
    ****** End of input bit stream ******
    1875 out of 1875 frames verified successfully
    Stream passes verification with no errors.
    and mediainfo gives this info
    General
    Complete name                    : V:\Temp\star1509.cpt
    Format                           : DTS
    Format/Info                      : Digital Theater Systems
    File size                        : 3.60 MiB
    Duration                         : 20s 0ms
    Overall bit rate                 : 1 510 Kbps
    Audio
    Format                           : DTS
    Format/Info                      : Digital Theater Systems
    Duration                         : 20s 0ms
    Bit rate mode                    : Constant
    Bit rate                         : 1 510 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : Front: L R
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Compression mode                 : Lossy
    Stream size                      : 3.60 MiB (100%)
    This file although it is accepted comes and with the error that it is not BluRay legal. So it is NOT OK

  • Has there been any word on being able to update to the new drivers yet? gtx 980

    Wouldn't mind being able to keep up to date on my gpu drivers but I have that fan issue on anything but .16. Has MSI made any statement or are they just going to ignore it?

    Quote from: Nichrome on 02-November-14, 02:18:54
    Problem is that their samples of GPUs are most likely from different batch and in fact hell knows what is the actual problem.
    If you have an issue with that, please contact MSI:
    >>How to contact MSI.<<
    I already contacted MSI they wrote me off and gave me a bullshit copy paste answer that had nothing to do with my question. Also this is almost certainly a software issue, and any half decent company would have test units from previous batches especially when the device is only a few months old.

  • Before I buy has there been any problems with new 27 iMacs?

    Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

    Hello richard from Folsom:
    Are you inside or outside?  (  I could not resist, I lived in Sactown).
    Anyway, advice is frequently worth what you pay for it, and mine is free.
    If you want it, buy it.  The posts above are right on the mark (except waiting is probably overly-cautious).  The best advice (from anamusic) is to buy the extended warranty - well worth the money.
    Barry 

  • Has there been any indication that a Service Pack 3 will be released?

    There have been a number of cumulative updates. In the past, there was some caution expressed regarding not applying CUs unless there was a specific issue that the CU addressed.
    It has been a year since the last Service Pack. The CUs have included quite a wide variety of fixes.
    It isn't clear to me how many new problems might be caused by just arbitrarily applying the latest CU.  Certainly I would begin by applying it to a test server. Certainly as well a test server will not be able to replicate the type of work load
    that a production server needs to support.
    If no further Service Packs are going to be forthcoming, then working CUs through the upgrade process seems relevant.
    If however, a more "hardened" Service Pack were planned, I would rather wait and go through that process with a hope that I would encounter fewer unpleasant side effects.
    How do other SP 2010 admins handle this type of situation?

    I'm not personally aware of an upcoming SP3 and of course this doesn't mean one is coming or not. From past experience, service packs usually come out ever 12-18 months so given this pattern I would guess if another SP is released it will be within the next
    6 months.
    That said, SharePoint 2010 ends mainstream support on October 13, 2015 (i.e. 14 and a half months from right now). Even if there is a Service Pack 3, it's support will end on this date as well.
    I recommend installing security fixes. Install CUs only if needed. This is the same advice from your first paragraph. :)
    What you should be considering is: what are your plans in the next year for SharePoint?
    Once mainstream support ends, Microsoft will not longer be pushing out updates other than security fixes. New functionality that you want to use in SharePoint won't be available to you without developing it yourself or buying a 3rd party product. Microsoft
    support calls will cost money even if in the end the resolution turns out to be something that would have normally been a no-charge incident.
    Now is the time to start planning an upgrade to SharePoint 2013, SharePoint Online, or a migration to another platform.
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • Has there been any updates?

    I was wondering if there have been any updates. I have been checking updates through the help menu but haven't seen any. Is it safe to assume this is were you would get them?

    Currently Being Moderated
    Mar 19, 2012 2:38 PM
    FAQ: Will there be updates to the Photoshop CS6 beta before the final product ships?
    This question is Assumed Answered.
    We do not plan any additional beta releases for Photoshop CS6 before it is announced and ships.

  • Has there been any problems with a iphone thats been unlocked

    I was thinking about getting my iphone 4 unlocked,has anyone had any problems with the phone was unlocked?

    What problems are you expecting after your iPhone is unlocked??  Oh no - I am being naïve - I am assuming legitimately unlocked by the carrier to which the phone had been locked?

  • I-Expenses Module. Has there been any reports created for users to query?

    hi all.
    Just wondering if anybody has come across any standard i-Expenses reports that have been shipped with related modules that would save us creating some ad-hoc and ORACLE reports. For example, a report that would tell us how many outstanding expense reports that have not yet been approved.
    Ive found you can export data from 'Internet Expenses Auditor' but thats just for us Admin types..
    thanks
    Steven

    Thanks for the suggestions.
    The reports are to remind users of their Expense Reports rather than them remembering themselves and finding out whats to do with any outstanding ones. I think I'm going to just stick with running SQL queries periodically and emailing the users.
    thanks again
    Steven

  • Has there been a fix for the speakerphone problem?

    I recently had to return two N97 handsets due to the fact that the speakerphone on the handsets worked poorly. Contacts I called using speakerphone repeatedly told me I was "breaking up." Speakerphone volume was also mediocre, compared to other N series handsets I have owned. When the problem occured with the second handset I settled on returning the phone and waiting until I knew more about the problem and whether Nokia was aware of it and preparing a fix for it. I no longer own the phone and have gone back to using my trusty and very excellent, but old N958GB.
    Can someone/anyone tell me whether this particular bug on this handset has even been identified by Nokia and whether it has been fixed? Is the problem with the speakerphone a software issue or is this a hardware/mic/factory issue? If this is an isolated problem and it was simply a "bad batch" I would be prepared to buy the phone agan, but based on my reading on this forum, this is not a completely isolated problem.
    Basically, I'm waiting to find out whether (a) Nokia knows this is a problem, (b) it can be fixed via software upgrade, or (c) this is a design flaw with the handset that's not fixable remotely. Any help users can give would really be greatly appreciated, as I would love to purchase the phone and update my handset at long last.

    Hi
    Does anyone know anything about this? At least, can anyone who had an update that has improved the phone say whether the update solved that problem, if they were experiencing the problem with the loudpspeaker before?

Maybe you are looking for