Has there been update on firmware?

I read the update from BT saying it was rolling out last night or something? I'm not sure how long it takes to update or whether mine has updated but I'm still getting the same issue as i've been discconected about 15 minutes ago and happens around the same time although it does happen occasionlly at night as well. I know alot of other people are having this issue but how will I know if mine has been updated? I don't look at all the settings in the HH5.

Mine has rebooted 3 times today so far, still same firmware, and presumably still the same problem.
Very frustrated indeed, BT's communication on this is useless, 'beginning to roll out' tells us next to nothing, like everyone else I had a perfectly working system which is now rubbish, trying to watch Netflix is a lottery, 3 quarters into a film and it reboots (or maybe not if I'm lucky), how will we know thats its fixed ?
Add to this that it will probably reduce our speeds due to the constant reboots and this is a massive mistake made by someone at BT, how could they release such a flawed firmware ?
I rang BT this morning before looking on the forum, I was asked my firmware number which perhaps suggests that it will change when its fixed, btw I was told that they have no eta on when that will happen.
Terrible service.

Similar Messages

Has there been updates to transcription support in a PS 4 Windows Update? Behaviour has changed...

I utilise PowerShell transcription support heavily in my PS scripts. Essentially I utilise transcription as a replacement to having a logging framework - all logging is performed via Write-Host, Write-Verbose and Write-Debug calls, and then logged to file
via a call to Start-Transcript at the start of script execution.
Transcription support in PS versions prior to 5 is limited in that it is hard coded in the Start-Transcript and Stop-Transcript commands to throw an exception if the host is not an instance of Microsoft.PowerShell.ConsoleHost. Also, to make it even more difficult,
Stop-Transcript throws an error when there is no active transcript; but there is no way to detect if there is. Therefore, I use reflection to get the ConsoleHost.IsTranscribing internal property value to determine whether to call Stop-Transcript at script
completion. This logic has worked fine for PS versions 2, 3 and 4. However, more recently I believe a Windows Update patch has changed the way the transcription works. It appears that PS 4 now supports transcription functionality that I thought was PS 5 (CTP)
specific - nested transcription sessions (i.e. you can now continually call Start-Transcript and it will create more sessions, rather than throw an error when there is an active session). Also, the internals of how transcription is managed must have
changed because the IsTranscribing property no longer returns the correct value. I am unsure if there is now a "supported" way of checking for this rather than hacking into the internals of the host. This change results in my script creating multiple
transcription sessions as it does not know there is already transcription started.
Does anyone know if there has been any updates in PS 4 for the transcription functionality? Or any other details regarding this?
Cheers

Hi Anna,
Thanks for the response. Can you make sense of the info below? Transcription appears completely broken
on the build on my machine, which I have not installed any PS CTP on. I am worried a hotfix such as KB3000850 which has also caused me the grief here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/eaa4a532-5ff5-4a2f-89ce-7e72c71a8fb7/powershell-30-stuck-in-infinite-loop-resolving-members-internally-is-this-a-ps-bug?forum=winserverpowershell
https://connect.microsoft.com/PowerShell/feedback/details/1045858/add-member-cmdlet-invokes-scriptproperty-members-when-adding-new-member
...has been installed via Windows Update. I am running Windows 8.1 and all latest updates applied as at 23 April.
My $PSVersionTable is the same as yours except for "BuildVersion" 6.3.9600.17400. I can also call Start-Transcript continually and it will keep creating sessions. Once I do this all sessions receive data once I
enter more commands in the console (i.e. each file is getting the same data). This is the behaviour I would have expected in PS 5 with the transcription updates, but not in a PS 4 update.
NOTE: In addition to this, the data being fed into the transcription file is NOT the same format as the standard transcription format. The transcription file contains different data and
is not a true reflection of what is on the console). The following data is being output to the transcription file after each command:
CurrentMatchIndex              ReplacementIndex             ReplacementLength CompletionMatches
                           -1
0                             8 {System.Management.Automat...
In addition to that (I haven't had a chance to look into this in detail), but the log files that are being generated by the PS module I have written are now containing a heap of contents that appear to be generated each time an exception
is thrown (even if it has been caught?)
"PS>TerminatingError(Invoke-Expression): xxxxxxx" and
"PS>TerminatingError(): "The pipeline has been stopped.""
messages, but no host, verbose, or debug data (i.e. terminating error details only, which I have never seen in the transcript file before). That's correct -
the transcription file doesn't contain any of the data it used to, just error info that did not used to be in there!!
Please assist urgently, this is a critical issue for me.

For the last 48 hrs my note 3 camera will not work..each time I try it freezes and eventually a message"camera not responding" comes up and I am able to exit....any ideas? has there been an update that went wrong?

has there been an update to camera that went wrong or does anyone know a way to work around this problem..tried power down and on again, even removed battery, still has same problem.

Go to settings and > into all apps > locate camera app > and do a force stop , > then clear cache. Do a soft reset of phone.

Has there been an update or fix to the digital signature time zone off set being one hour off?

Has there been an update or fix to the digital signature time zone off set being one hour off? I have seen that in the forum that this was identified as a bug back in June 2012. Any updates on this as it is still occurring in my version of Acrobat X with all updates applied. Thanks.

Windows 7
Sent from my BlackBerry 10 smartphone.

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

Hey there Luba_kalstad,
It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section down toward the bottom if needed:
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
Take care,
Sterling

How do I enable an update on a 3GS which has never been updated before?

I need to update iPhone 3GS, as it has NEVER been updated before. Under the general/settings, there is no update icon available! How do I install this?

The Update option on the device is only available in iOS5 and later.
Connect the device to the computer and update via iTunes.
How to update iOS devices

HT5457 my iphone 4 has not been updated since purchase almost a year ago.it does not have the software update option in settings. how do i get to update? settings. How do I update it

My iphone 4 has not been updated since I purchased it a year ago. When I go to settings to click software update as per instructions, the software update is not listed. How & where do I go to update my phone?
Thanks

You'll have to use iTunes on your computer to get your iPhone to the latest version of iOS. From there you'll be able to update directly from the iPhone for future releases.
http://support.apple.com/kb/HT4972
Regards.

I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem?

I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g two years ago, I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem? Apple told me there was some sort of interference with the airbag system. Jaguar was totally unhelpful.

Hi Labjock,
Welcome to the Support Communities!
The article below may be able to help you with this.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Judy

Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

hello,
After installing the Adobe reader, I got the following error message:
Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For mo

I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file

For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

HT201317 My Photo Stream is on my Windows 7 PC has not been updated

My Photo Stream is updating regularly from my iPhone 4 to my iPad, but My Photo Stream on my Windows 7 PC has not been updated for the last four months. Any suggestions?

Hi dDub_DW,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with Photo Stream on your PC:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
Cheers,
- Judy

Updated to iOS 5 and now photos sent with text message show as sent, but are not received to an iPhone that has not been updated.

Updated to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.

This is being caused by using the same Apple ID for iMessage. To fix this you have two choices:
On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

Record has already been updated by another user. Please re-query and retry

Hi,
I want to uncheck the option Send e-mails for canceled notifications in Workflow mailer but getting error in fouth step in workflow Notification mailer:-
1. Connect to Oracle Applications Manager with SYSADMIN.
2. select Workflow manager.
3. Click on EDIT button-->Advanced(Step 1)--->next(step 2)--->next(step 3)---"ERROR"
This record has already been updated by another user. Please re-query and try again. ORA-06512: at "APPS.FND_SVC_COMP_PARAM_VALS_PKG", line 288 ORA-06512: at line 1
Regards,

Pl see if MOS Doc 286418.1 (ORA-06512: At Fnd_svc_comp_param_vals_pkg When Configuring The Java Mailer) can help
HTH
Srini

Has there been any helpful remedy for the ghost typing issue?

Has there been any helpful remedy for the ghost typing issue? Where the ipad starts typing on its own and screens moving around the screen?
I have had the ipad 1 for a while- and it started about 5 months ago. Anything other than shutting down and leaving alone for hours work?

Yeah, well if you read that whole thread you will see lots of posts identifying it as a hardware problem:
I'm the original poster on this thread. I ended up taking my iPad back to the Apple Store. They ran some diagnostics, and found that my RAM was almost maxed out, which didn't really make sense. It indicated a faulty processor, so they gave me a new iPad. I took it home, synched, and it only took about 45 minutes to synch 30 gigs of data. My original iPad took about 5 hours to synch for the first time. Clearly there was a problem with the processor in the first one, but I didn't realize it at first, as it took several weeks before it started exhibiting the erratic screen behavior. Hope this helps anyone else who might experience this down the line.
-merenvov
So i went to my apple store... which was PACKED. Found a manager and explained my problem. Without any question, they simply replaced it. Awesome!
-duncanwilcox
I have the same problem, and I found out what's wrong, it's not the software - restart, restore and FW upgrade will not help, it's definitely hardware. The best option is to replace your iPad assuming you have an apple store nearby…
-DarkDwarf
Just get your iPad replaced. It has a hardware problem.

Has there been update on firmware?

Similar Messages

Maybe you are looking for