Has to restrict the usage of Storage location

Hi ,
Can we restrict placing and issuing the stock from storage location for certain period of time..
Please advice.
Regards,
Kuber

Hi,
Kindly go thro the link
Need to restrict storage locations
It's useful.
Thanks,
JK

Similar Messages

How to change the line item storage location during the sales order creatio

How to change the line item storage location during the sales order creatio

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

Add restriction in CO11N for storage location without doing goods movement

Hi experts,
my requirement was to restrict user for some storage location in CO11N, though i completed it using badi "WORKORDER-GOODSMVT" there is some issue.
Some user just confirm the order in the front page only they are not going in for goods movement tab. Thats why the order get saved for the restricted storege location also.
I try to use badi "WORKORDER_CONFIRM" but it is not showing the line details.
is there any way to restrict the storage location in the front page only or make goods movement tab compulsary.
Please Help
Thanks
Rahul

Hi,
I managed to do it with 'WORKORDER GOODSMVT" method BACKFLUSH.
Now it is showing the proper error message at the front screen.
BUT WHEN I PRESS ENTER IT IS GIVING ERROR ' EXCEPTION CONDITION DUPREC RAISED".
Please HELP
Thanks
Rahul

How to maintain the address of storage location in 2 diff languages?

Hi ,
I have to maintain the address of storage location in 2 diff languages
how to achieve this?

do you mean international adress e.g. with chinese characters and western characters?
you have to activate international adress version first.
when you maintain the storage location adress (by clicking he envelope, you will find a button for international adress in the lower part of the pop-up for the adress .

How can I restrict the usage of a iPhone 5c? I would only like my daughter to be able to use her phone between 7am and 10pm central. Any ideas how to do this or an app to use?

How can I restrict the usage of a iPhone 5c? I would only like my daughter to be able to use her phone between 7am and 10pm central. Any ideas how to do this or an app to use?

Hi! i believe there is no preinstalled app than can do that for you, however you can use a third party software, such as this: http://www.bitworks-engineering.co.uk/Apps/TimeLock_App/Welcome.html or this https://itunes.apple.com/us/app/parental-timelock-time-limit/id689577280?mt=8

How to find out the plants and storage location for a given company code

hi
How to find out the plants and storage location for a given company code

Hi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore

In va02 tocde after entering the data only storage location field is not saving.why?

Hai
in va02 tcode after entering the data only storage location field is not saving. why?

Hi Purnaiah,
Are you using any user exit for this or not?
Check for the below exit, this may be the place where you can implement your code for saving the value.
SAP MV45AFZZ calling the user exit with a form USEREXIT_SAVE_DOCUMENT
Regards,
Rafi

AzCopy error "The destination azure storage location type cannot be inferred"

Hi All,
I'd like to try out Microsoft Azure File Service.
I created a storage account with File Service support. I created a File Share. I was able to mount this File Share using "net use" from my Azure VM. I can manage files from this VM.
Now I'd like to copy files from my home computer.
C:\Program Files (x86)\Microsoft SDKs\Azure>AzCopy /Source:c:\mydir /Dest:https://myendpoint.file.core.windows.net/myshare1/ /DestKey:%key% /S
I get an error:
[2015.02.21 11:08:21][ERROR] The syntax of the command is incorrect. The destination azure storage location type can not be inferred. Use /destType:blob to specify the location type explicitly.

Hi,
AzCopy version 2.4 now supports moving your local files to Azure files and back. Please check if the AzCopy version is 2.4 or higher.
In addition, empty folders will not be uploaded. Please make sure that the source you defined is not an empty folder.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Has anyone picked materials from one storage location but confirmed TO to different storage location?

The business does not want to use MRP areas to segregate materials between service part and production. What they want to do is separate service parts on deliveries at our shipping storage types (915/916) from MRP view. This requirement is primarily for our international shipping area. We may pick parts for an international shipment and the parts will sit on the delivery - not goods issued because we don't want to invoice - for up to 3 months. During that time, MRP sees the inventory so replenishment is not done in a timely fashion or parts may get stolen from the shipment for a production requirement because the inventory is seen.
Could one solution be to create a non-MRP relevant storage location (say 1200) and place the shipping storage types in this storage location? Then when the transfer order creates, the system would show the source to be from the MRP relevant SLoc (1100), stype (130), bin (A-01-A), - these are examples - with the destination to be to non-MRP relevant SLoc 1200, stype 915, bin (dynamic using the delivery number) 0080745298? Has anyone had this type of request or know of a way to satisfy the business requirements without different MRP areas? They also do not want to have two transfer orders - one with a 601 movement and one with a 311 movement.
Any known solutions or outside-the-box thinking would greatly appreciated.
Marla

I don't have the solution, just some critical questions and hints
Even a non-MRP relevant storage location can be warehouse managed.
The stock is shown in any stock list as long it is not goods issued, no matter if it is stored in a
non-MRP relevant storage location.
Stock that is picked for a delivery is not available for others, it is reserved. A delivery is a MRP element and hence should be taken into consideration in the planning run.
A non-MRP relevant storage location will only solve your planning issues if you move the material there if it is not yet picked and allocated to a delivery.
Do your thieves really use SAP to check if the stock is there, or do they just see the stock in the warehouse? As said, the non-MRP relevant storage location will not solve this issue since the stock is still visible.

Restriction on movement type,storage location on USER ID

Dear Guru's,
I have to restrict movement type 311 on some storage location for some user ID.Following is already done but not able to restrict the movement of material on other storage location rather than defined:
1) Maintained authorization objet M_MSEG_LGO with two storage location ST01,ST02 and movement type 311.
2) Using BADI MB_MIGO_BADI and maintained Z table with USERID,Mvt type 311,storage location ST01,ST02.
Still we are able to do Mvt 311 on other that defined locations in authorization objet M_MSEG_LGO and Z table....
Kindly give ur valuable suggestion to resolve the issue......
With Regards.

HI
For your requirement only I have suggested to create multiple role. In one Role you specify SLOC & MOvt type(only 311) in auth object M_MSEG_LGO & M_MSEG_BWE for slocs where you want 311 movt. In other Roles of goods movt you also specify other SLOCs & all other movt except 311. I mean in the other Role you cant keep the movt type as * in auth object M_MSEG_BWE.
So its a combination of SLOC & MVT tye. Try & give feedback
Shakti
Edited by: SHAKTI BEHERA on Jan 14, 2012 12:15 PM

How to restrict the Usage of Rejection Store for an User?

Hi!
I am a QM User. without QAD Knowledge store & Production persons moves the Components to Rejection stores thro' Mvt 311. The rejection Components are getting accumulated and we are questionable for the same.
So Can anybody resolve the problem to restrict the Rejection storage location for an user or any other solution is highly appreciated.
Pls. help me.
Thanks & Regards,
Surya

Hi
Avoid particular storage location from QC
this is possible through autherization object M_MSEG_LGO
Go to SPRO->mat mgt->Inventory mgt& physical inventory->Autherisation Manegement>Autherizarion check for storage location-->for you plant & Storage loaction click on Autherization.
When the indicator is set you must have authorization for the authorization object Goods movements: storage location ( M_MSEG_LGO) in order to enter a goods movement in the storage location using a particular movement type.
In M_MSEG_LGO
The authorization object contains four fields:
1.Activity: defines whether the user:
may enter goods movements (Activity=1)
may change goods movements (Activity=2)
may display goods movements (Activity=3)
2.Movement type: defines the movement types you can use to to maintain goods movements.
3.Storage location: defines which storage locations in which plant you may maintain.
4.Plant: defines which plants the user may maintain.
here you can Quarentive Quality people from these storage loactioon.
Regards
Sujit

Need to Restrict the usage of same conditn type multiple times in same PO

Dear All
The system is allowing the usage of one condition type multiple times in the same PO line item.
We want to put restriction in such a way that "one condition type if used should not be allowed to use again for that line item.
Is there any solution for this through Configuration settings or we need to go for some enhancements?
Please suggest me the enhancements available to achieve this requirement.
Thanks & Regards
Bala

I think you have to make use of an exit (EXIT_SAPLMEKO_002) or a BADI (ME_PO_PRICING_CUST)

Restrict Posting material to storage location

Hi,
Suppose there A and B two starage locations are there. One user called X he can access and posting the material only B. We have to restict him/her storage locacation B so that he/she can not post any material to B but he can only see the material of B. MB1B Tran. Code is used for posting the materials. Please guide me how to solve this problem.
Thanks In Advance.
Regards,
Krushna Biswal

Set Qualtiy for Production after GR.
When you confirm the Production or do a 101 for the order, the stock will go in to a quality Stock,
An inspection lot is created, once the result recording done and UD is done, the stock is transferred to Unrestricted or sales stock.
Regards
Ratan

The usage of storage resources

Hi gurus,
Suppose i have PP-PI scenario like this :
The milk will be processed every operation and phase in a "can". This "can" will be transported in every resources center, so we can say that one "can of processed milk" equal to one process order. The problem is that company have 2 various "can". The one is small can and the other is medium can. If the process order quantity small enough than small can is used, but if the process order quantity large enough than medium can is used. The company want to monitor management of this can in their system. If i use fixed lot size procedure, than it will be possible for 1 type of can.
Maybe storage resources can be a solving for this problem, but i don't know how to use it and its logic. I need advice for this scenario..
Thanks for your attention.

Hello,
I think that your scenario can be managed with standard resource as well. Imagine that you have Lot Size Key that is not Fix but Ex with a min ( for the small can) and a rounding, being rounding + min = max = (medium can)
Then you can define two different resources and two production versions with different lot-size ranges (different master recipes pointing to each resource).
When the system creates a process order, it will select the suitable production version and then, the desired resource, will be loaded (in capacity).
I think that you can also work with storage resource ( and add some features such as capacity ) but the basic issue can be solved according to my first advice.

Moving the music lbrary storage location from C: to D: drive

I loaded all of my music to the C-drive and it is getting full. How do I move all of the music to a directory in D:/, Additionally, how dow I configure Itunes and my IPod to go to the D- drive load all new data?

This article will tell you how how to move the folder. You don't need to make any change to the iPod, it will load from wherever iTunes knows the music is located : Moving your iTunes Music Folder

Has to restrict the usage of Storage location

Similar Messages

Maybe you are looking for