Has UDEV_TIMEOUT been dropped from rc.conf as an option?

I was merging changes with a recent rc.conf.pacnew and I noticed that UDEV_TIMEOUT is not part of that file.
I also checked with 'man rc.conf' and it's not listed there either. It that no longer a valid option in rc.conf? If so, where should that timeout be configured now?

OK - so this is different from the timeout that I see during boot, which is 30 secs:
Wed Jan 25 19:49:47 2012: :: Waiting for UDev uevents to be processed    [BUSY] udevd[160]: worker [187] timeout, kill it
Wed Jan 25 19:49:47 2012: udevd[160]: seq 1347 '/devices/pci0000:00/0000:00:1c.1/0000:07:00.0' killed
Wed Jan 25 19:49:47 2012: udevd[160]: worker [187] terminated by signal 9 (Killed)

Similar Messages

  • My Ipad of only 21 months has stopped working. It's dead as confirmed by my local apple store. It has not been dropped nor abused. Apple don't seem interested and have yet to respond to a letter. Any suggestions welcome!

    For Christmas 2012 my son bought me my first iPad when up in Scotland on business. So from 25th December until last Tuesday evening, September 3rd, this had worked fine and was my pride and joy. It's an amazing piece of technology.
    Imagine my horror and annoyance when I went to use it on the Tuesday evening only to find that it would not start up. All the usual buttons were pressed and I plugged it in to a power source then into iTunes and saw no no change.
    On Wednesday morning I went into the Apple shop in Harrogate, where JCL (salesman) tried all of the same things as I had and declared that he had never seen this happen to an iPad! My only course of action was to send it back to Apple who would tell me it's dead and advise me to buy a new one. [This, as it is welded together and they have no means of repairing them!!] So what can I do? I had to buy a new one, which cost me £399.
    Is this good value for money under the Sale of Goods Act? An iPad should surely last more than 20 months? The device has never been dropped and is in very good condition other than it does not work.
    I would appreciate any views on this.
    I have written to Apple and they have yet to respond (15 days ago)

    There is No overriding EU law on this however there is a directive 1999/44/EC and sets out a general framework on harmonizing complaints and settlement of defects and resulting breaches in contract.
    Under UK law these are the relevant regulations
    Sale of Goods Act 1979
    Supply of Goods (Implied Terms) Act 1973
    Supply of Goods and Services Act 1982
    The Sale and Supply of Goods to Consumers Regulations 2002
    These are considered to be in compliance with the directive in most respects and in some respects exceed the minimum directive definitions.
    The Directive itself adds very little and in some ways actually reduces the consumer (buyers) rights compared to UK laws and regulations.
    The directive sets a maximum period of just two years for which the seller may be held responsible for repairing/replacing pre-existing faults and a period of just two months from identifying the fault and reporting it to the seller.
    As stated above UK law allows a period of 5 years in Scotland and 6 years in the UK and doesn’t have a defined period of identification or reporting of that pre-existing fault
    The UK law also incorporates a minimum period of 6 months of unlimited warranty (Extended to 12 month by most sellers including Apple).
    There is NO provision for unlimited warranty within the EU directive, and all faults are assumed to be pre-existing.
    Pre-existing is very important in all these claims as in UK law it fixes the timeline of the fault using the three definitions in the previous post as being present at the start of the contract (Time of purchase)
    Hence the need for an expert report !

  • Since updating the software on my iPhone 3gs it has developed the so called "white screen of death". The phone has not been dropped or damaged in anyway, the problem only developed after software upgrade. Rung apple and they were less than helpful

    since updating my iphone 3gs software it has developed the so called "white screen of death" this happened immediately after software install. It has never been dropped or damaged. I have tried the solution which seems to pop up most of holding down the power button and the home button for 10 seconds but this hasnt helped at all. Tried ringing apple, who were less than helpful and disinterested as the phone is out of warranty. I am hoping there is a solution which doesnt mean shelling out for a new phone! any ideas?

    Basics from the manual are restart, reset, restore.
    Try all of these.
    If these fail, then:
    iOS: Unable to update or restore

  • My iPad has not been dropped or damaged at all. The screen is grey fuzzy and has coloured lines down the middle. iPad 3 also.

    My iPad has not been dropped or damaged at all. The screen is grey fuzzy and has coloured lines down the middle. iPad 3 also.

    Basics from the manual are restart, reset, restore.
    Try all of these.
    If these fail, then:
    iOS: Unable to update or restore

  • White lines on ipod classic screen, could it be cracked screen? it has never been dropped or anything. Is it pretty common problem. Contacted apple support, denies problem exist.

    White lines three appeared on my ipod classic screen. It has never been dropped or screen scratched. Suddenly white lines appeared on the screen. Tried to reset settings, nothing changed. Is this a common issue with ipod classic coz apple adviser denying ever having heard of this problem and I have to pay half of msrp to fix it. Offered 10% off to purchase new ipod and turn in old one. What a waste. Apple should take responsibility if this problem is indeed inherent with this product.

    The magnets are tnot the cause.
    Try the standard fixes to rule out a software problem.
    - Reset. Nothing is lost
    Reset iPad: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore tofactory defaults/new iPad
    If still problem then time for an appointment at teh Genius Bar of an Apple store. The drops may have damaged it or there could be another cause.

  • Stripes have suddenly appeared on my iPhone 5 screen, it has not been dropped, how can I fix it?

    Hello, blue and white stripes have suddenly appeared on my iPhone 5 screen, it has not been dropped. I can still receive calls and messages.  How can I fix it?

    First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
    If this does not help, set it up as new device, explained here:
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
    iPhone - Contact Support - Apple Support

  • "This message has not been downloaded from the server" - Multiple devices all using Exchange Active Sync

    We are having this issue across multiple IOS devices ranging from IOS version 5.x up to the latest 6.1.2. Many (not all) emails sent to the devices are unreadable and simply state: "This message has not been downloaded from the server". Microsoft believes this to be some sort of bug with the IOS devices in the way they are handling the SSL encryption.
    Facts:
    - Devices are connected to an Exchange 2010 SP1 Rollup 6 via Active Sync (No POP3, IMAP or SMTP)
    - issue occurs on multiple IOS devices within the organization ranging from IOS 5.x up to the latest 6.1.2
    - Issue occurs on both external cellular data and internal wireless networks
    - Not all emails sent to the devices result in the error, but issue does tend to occur more frequently from certain senders/domains
    - Using the same user account on an android phone does not result in an issue (even when receiving the exactly same email that has been sent to the IOS devices)
    - Closing mail app / rebooting device does not resolve the issue
    - Doesn't appear to matter what the mesage format is (can be html, plaintext, etc)
    - Spent nearly 7 hours with Microsoft going through the Exchange server configuration and looking for possible causes. None have been found and all testing indicates things are setup correctly.
    - This is not a case of Issue 2.3 listed here: http://support.microsoft.com/kb/2563324 (verified by Microsoft Support)
    - If we disable SSL on the IOS device and connect via plain HTTP the messages are displayed correctly!
    - If we use a different SSL certificate, the issue still occurs - so not a problem with the original cert.
    Does anyone have any suggestions on what would cause this? Does the ISO devices have any sort of log that would indicate why it's reporting this error? The current error is pretty unhelpful.

    GFI Have a solution for this problem. It is to do with iOS implementation of reading the message headers when SPF compliance modifications are made by GFI.
    http://kb.gfi.com/articles/SkyNet_Article/Error-This-message-has-not-been-downlo aded-from-the-server-when-downloading-messages-to-an-iOS-device?retURL=%2Fapex%2 FSupportHome&popup=true

  • About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

    About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

    Just to make sure, open Mac App Store and click Purchases. Can you pause the download and restart it?

  • The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

    The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed.  Thanks!

    If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
    If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership. 
    Please refer to : Lightroom and Creative Cloud FAQ
    Regards
    Rajshree

  • I updated my iphone 4S with iOS 6.1.3 and now my e-mails say, "This message has not been downloaded from the server".  We have an Exchange server at work.  ??

    I updated my iphone 4S with iOS 6.1.3 and now I cannot retreive or send my e-mails.  We have an Exchange server at work.  I still receive the e-mails on all my devices just fine and I can see the subject headings & a small portion of the body of the e-mail, but when I open the e-mails there is no body and it reads, "This message has not been downloaded from the server".  Very aggrevating and is not helping my business at ALL!!  Same has happened with both iPads we own now. 

    Delete then add back the exchange acct on each device.

  • Why data has not been copied from staging DB to Reporting DB even timer job status is success ?

    Hello,
    I am facing following issue regarding web analytic service for specific date 2014-08-18:
    Verified following services which are running and status was success on that specific date 2014-08-18 :
    Web Analytics Service
    Microsoft Usage Data Import
    Microsoft SharePoint Foundation Usage Data Processing
    Observed latest Web Analytics Setting as below :
    LastAggregationDateId 
    20140817 -   The date id of the last successfully completed data aggregation
    LastAggregationTime
    2014-08-18T00:00:13.210 - The time of the last successfully completed data aggregation
    LastBestBetSuggestionAggregationDateId
    20140818 - The date id of the last successfully completed best bet suggestion data aggregation. This date id should not be reset to an earlier date manually.
    LastDataCopyTime
    2014-08-17T23:59:09.693 - The last time the data were copied from the staging databases to this reporting database for aggregation
    Above settings says that Data has not copied from Staging DB to Reporting DB on Date 2014-08-18
    In order to verify the same I have checked as follow:
    SELECT COUNT (*) FROM [dbo].[WATrafficAggregationByDate] WITH (NOLOCK)
    WHERE  [DateId] = 20140818
    Above SQL Query has returned ZERO value.
    Can anyone please let me know Why data has not been copied from staging DB to Reporting DB even timer job status is success ?
    Your help will be much appreciated.
    Thanks and Regards,
    Dipti Chhatrapati

    The image itself has the answer
    The user requests a page, and the action gets picked up by the Web Analytics service that runs on SharePoint.
    The Web Analytics service logs this in the “.usage” files.
    A Timer job called “Microsoft SharePoint Foundation Usage Data Import” by default runs every 30 minutes. It imports the logs into the staging database.
    Each night the “Microsoft SharePoint Foundation Usage Data Processing” Timer job runs and transforms the data into the reporting database.
    The last run time of the import from staging and the aggregation is logged in the Settings table in the Reporting database.
    Usage and Health Data Collection Service Application collects Data about Usage and Health of your farm.
    This information is used for Health Monitoring and this is also required for running the Web Analytics Service. If you do not have a Usage and Health Data Collection Service Application or your
    Usage and Health Data Collection Proxy is stopped, you will not see any data in the Web Analytics Report
    Regards Chen V [MCTS SharePoint 2010]

  • "This message has not been downloaded from the server"

    Hello, Ever since ive had an iPhone and have used Edge to open a resaonably sized email i usually get "This message has not been downloaded from the server". Im sure this has to do with the slow Edge network timing out. How do you correct this if there is no "Download Now" button. The only solution I have found was to force quit the Mail App (Hold Home button for 6 seconds) and go back in and pray that it downloads without timing out.

    There was a thread on this yesterday that stated that if there is more message it may take four to five minutes to download the entire message and/or attachments.
    One poster even said that it has taken him over 30 minutes in some cases.
    I have this same problem on some email and on others the entire email is downloaded, including any attachments. Since there is no communication put out by Apple regarding this anomaly, it is hard to say whether this a an Apple or provider, i.e., Google or Yahoo.

  • TS4058 Why  has iChat been taken from me?  I don't want to upgrade to Lion!

    Why  has iChat been taken from me?  I don't want to upgrade to Lion!

    Hi,
    iChat 5.x.x works in Snow Leopard.
    (Older versions also work in earlier OS versions)
    iChat 4 and iChat 5 had a method of getting to a registration page for @mac.com names.
    The iChat version no longer does this (but the registration page still exists)
    In addition to this if you selected AIM then the option does not work now as AIM moved their Registration pages soon after Snow Leopard came out.
    @mac.com registration page
    Keep the password to 16 characters or less (AIM server limit)
    You cannot use an email that has already been used with or is an Apple ID.
    AIM registration Page
    You cannot exceed the 16 character limit here
    You need an email for Confirmation and for Password recovery (You can use it again and again if you want to set up loads of names)
    You can chose a Name or use an existing email.
    iChat can also use Jabber IDs
    Google Mail IDs can have Talk enabled in their Google Account settings and then it can be used in iChat
    Facebook have a Chat option that needs enabling.
    Both use Jabber servers and your ID with them is a Valid Jabber name.
    There are lots of other Public Jabber servers.
    10:22 PM      Tuesday; April 17, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Getting green line/veins on my ipad display. Unit has never been dropped and is out of warranty. Any ideas?

    Getting these annoying green veins on my screen.  Ipad has never been dropped.  Any suggestions on what to do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • A Twist on (this e-mail) has not been downloaded from the server.

    So I've read the discussions on the following message in MAIL
    The message from [email protected] concerning “Re: blah has not been downloaded from the server. You need to take this account online in order to download it.
    But here's my issue - the ONLY e-mails in my POP account that have this message are between myself and one other person. All other e-mails from the same time period, and in fact everything in my POP account is normal except for messages I sent to and received from this person. I don't want to get into the specifics, but I have several good reasons PRIOR to discovering this to believe that my communication with this person was being monitored. If I didn't have these doubts from before as well as the fact that ONLY this correspondence is tainted, I wouldn't be so curious.
    Is it possible that this "download from server" message indicates that some other party was reading these messages? I was not in the US during this exchange - but rather in a country which does poke around quite a bit. I don't mean to sound dramatic or paranoid - but it is awfully strange and suspect.
    thanks.
    (i don't think this is a problem with Tiger or OS X or whatever - as it only applies to this correspondence)

    What does "being monitored" mean?
    In Mac OS X 10.4 (Tiger), that error message means there is some mismatch between what Envelope Index says there is in a mailbox and what there really is.
    The only way I can currently think of those messages being monitored could have a bearing on this is that someone had access to the *.emlx files stored locally on your disk.

Maybe you are looking for