Has Yosemite fixed Maverick's Mail problem with Group email addresses?

Does anyone know if Yosemite has fixed the problem that Maverick's Mail program had with Contacts? Maverick's Mail program cannot show Group Address names in the email "To:" window. By default, it shows all of the email addresses in a Group rather than the Group name. The work-around requires putting Group Addresses in the "Bcc:" window. Has that problem been fixed in Yosemite?
Many thanks,
Bob Winckler

Hi Barney,
Just found out that Maverick's problem with Mail's Group address procedure has resulted in my email accounts being put on hold by my Internet Provider. I'm the president of a local club, and I routinely send out emails to 200+ email addresses several times a month. Since Maverick's Mail now doesn't keep Group addresses hidden when shown in the email "To:" window, we have to put those Group addresses into the "Bcc:" window. The first couple of times that I did that, the emails went through, but the third time that I tried to send out such an email, my Internet Provider shut down my email account with the statement "Your ability to send new mail has been suspended as a high volume of suspicious mail has been sent from your account recently. Please contact your IT administrator." The IT administrator required me to run a virus check and then set a new password for my account before they would reactivate it. In my discussions with several of my Internet Provideer's tech reps, it appears that the way the way that the Internet Provider has their server's security system set, a high volume of email addresses in the "Bcc:" section of emails is enough to shut down an account as suspicious. Until Apple gets this problem fixed, my only options are to switch internet providers (after finding one that will let high volumes of "Bcc:" go through) or switch to an older Mac operating system, which I've done (now using an ancient iMac 400DV running Tiger (OS 10.4.11). Given the high number of businesses, etc., likely to be using Macs, I'm really surprised that Apple has let this problem with Maverick's Mail program go uncorrected.
Best regards,
Bob W

Similar Messages

This Mac can't connect to iCloud because of a problem with my email address Open iCloud preferences to fix this problem"

I keep getting this message over and over and over.
This Mac can't connect to iCloud because of a problem with <my email address>
Open iCloud preferences to fix this problem"
I go to IC Preferences but there is nothing I can fix there that is relative.
My outbox is no longer working in MAIL so I cannot email out. I have to use my wife's MBP to send emails.
I can get emails. I didn't change anything in m,ail preferences, so what is Apple doing to me?

I also have had this problem and see no resolution - signed out of my account and signed in again, did not get any resolution to the problem. done this twice. Is Apple addressing this? I thought that 10.10.1 would resolve this but found to my dismay that there has been no resolution. Each time I log out of iCloud and then sign in again, there is a time lag before all my files in iCloud become accessible so have stopped trying this remedy. I also have issues with iTunes where am asked for my password 4 times before I can log in. Would like to know if there is anything in the pipeline to remedy/rectify this problem. Issues with bad internet connectivity have improved but are still there. Wish Apple would spend some more time in testing and resolving issues before releasing new software.

How Does one fix this-"This Mac can't connect to iCloud because of a problem with "My Email Address"

Hello Apple Community: I receive this message multiple times a day.
"This Mac can't connect to iCloud because of a problem with "My Email Address" Open iCloud preferences to fix this problem.
After sighing into iCloud I can not find a problem.
Is this a Yosemite issue, because thats when the issue started?
Thanks for your help..

Yes, this is a constant problem for me as well. I have 2 Macs (iMac and old MacBook Pro) running Yosemite. I seem to only get this message on the iMac. I've tried logging out of ICloud on both and logging back in; the problem re-appears randomly. I also have no issue on IOS devices.
It's mainly annoying. I open the iCloud panel in System Preferences and it tends to go away.

TS1702 problems with old email address

Downloaded some apps onto my iPhone 4 with one email address, which got hacked, efore the cloud was introduced
Logged into the cloud with a different email address and now I can't download my old apps as they are under an email address i no longer use, and is not recognized

Hello Chief Weasel,
The article linked below details how to go about changing the primary, alternate and notification e-mail addresses used with your wife's Apple ID.
Primary email address
Every Apple ID account has one primary email address, and that address is your Apple ID. When you create an Apple ID, you enter the primary address to use as your Apple ID.
Your primary address is also the contact email address for your account. Check it regularly, because it receives email that you need to manage your account. For example, before you can use a new or changed Apple ID, you need to verify it as directed in a verification email that Apple sends to that address. Didn't receive the email?
Manage your Apple ID primary, rescue, alternate, and notification email addresses
http://support.apple.com/en-us/HT201356
Cheers,
Allen

Problems with links/email addresses when viewing PDF in browser ONLY

Hi,
I have just sent a pdf document with an email address in. There appears to be a strange issue: if that pdf file is downloaded and viewed in Adobe Reader the mailto links behind the text email addresses work as normal ([email protected]). However, when that pdf is viewed directly in the browser (Chrome on Windows 7) using the built in pdf viewer all the double letters in the mailto are removed (eg. [email protected]), however the text itself is unchanged.
There are two examples of this in two situations, both double letters.
I've just tried a test with '[email protected]' as the test address. Again, the mailto link shows as "mailto: [email protected]". Removing the first double letter, but keeping the second!
Any suggestions?
Thanks,
Matthew

Sorry, you will have to complain to Google about this; Adobe has nothing to do with the Chrome PDF viewer.
Or configure Chrome to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Problem with Groups from Address Book in Apple Mail

I have set up a group in my address book. When I use Apple Mail I use this group to send specific messages to. But for some reason I keep getting error messages saying that my outgoing sever encountered a problem with the messgae. It only happens when I send messages with a group, not if I send messages to single recipients. The group consists of 90 emails, so I can't enter their emails each time I want to send a message to the group.
Thanks in advance,
Regards

I am having a similar problem. All the addresses are correct, and I know this because I use them all the time with no errors. BUT when bundled into a group - actually any group I set up I cannot send successfully. I have two groups in my mail program and neither will work.

Configuring Receiver mail adapter with dynamic email addresses

Hi,
I'm a newbie to XI and I have problems in configuring the Receiver mail adapter with the "Use Mail package" option selected. I am trying pickup a file (using file adapter on Sender side, picks up a simple XML file) and after mapping in XI, send the message as an email message to dynamic email addresses.
Everything works fine if I did not select the "Use Mail Package". But when I choose that option it errors out. I followed this blog posted on SDN -
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
The following XML message is my source
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/Somenamespace">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>Studentlastname</lastname>
            <firstname>Studentfirstname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Test mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
What I want to accomplish is, I have a simple message mapping where the Studentdetails are mapped to, lets say Customer details. For convenience lets keep it simple, StudentId --> Customerid, (student)Firstname --> (customer)Firstname, (Student)Lastname --> (customer)Lastname
I would like to get the Customer details as an XML attachment or in the body of an email with from, to and subject corresponding to that specified in the <Mail> node.
I followed the instructions posted on the blog and it works fine if I don't map the studentdetails to customerdetails. I did multimapping, with one source message (the xml file I posted above) and two target messages (customerdetails and Mail, which is the external definition posted on the blog). I beleive I'm missing something here. Could somebody please guide me through this?
Thanks
Karthik

hi,
I still have not found the solution for this problem. Michal, your blog works fine when my source message has got only the mail details. As per your advice, I tried modified the structure of the xsd file as follows
<xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="Mail">
    <xs:annotation>
      <xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:string" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Reply_To" type="xs:string" minOccurs="0"/>
        <xs:element name="Content_Type" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="Message_ID" type="xs:string" minOccurs="0"/>
        <xs:element name="X_Mailer" type="xs:string" minOccurs="0"/>
        <xs:element name="Content" minOccurs="0">
          <xs:annotation>
            <xs:documentation>any type</xs:documentation>
          </xs:annotation>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="encoding" type="xs:string"/>
    </xs:complexType>
</xs:element>
<xs:element name="MailReceipt">
    <xs:annotation>
      <xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Server" type="xs:string"/>
        <xs:element name="Format" type="xs:string"/>
        <xs:element name="UseMailPackage" type="xs:boolean"/>
        <xs:element name="Encoding" type="xs:string"/>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
<xs:element name="CustomerlistExternal">
    <xs:annotation>
      <xs:documentation>Customer List</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Customername" type="xs:string"/>
        <xs:element name="Customerid" type="xs:string"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
My source message will be something like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>abclname</lastname>
            <firstname>abcfname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Testing Mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
I have mapped the <student></student> information to customerlist, with customerid --> studentid and customername --> firstname or lastname (for symplicity). This was a multimapping with one source and two target messages. My test mapping output is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
     <ns0:Message1>
          <ns2:Mail xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Subject>Testing Mail adapter</Subject>
               <From>[email protected]</From>
               <To>[email protected]</To>
          </ns2:Mail>
     </ns0:Message1>
     <ns0:Message2>
          <ns2:CustomerlistExternal xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Customername>abclname</Customername>
               <Customerid>1</Customerid>
          </ns2:CustomerlistExternal>
     </ns0:Message2>
</ns0:Messages>
So how would I get this part of the <CustomerlistExternal></CustomerlistExternal> part of the message as an attachment to the mail address specified in the <ns2:Mail></ns2:Mail> tags.
I'm definitely not understanding it right and am missing something. Could you give me step by step instructions to acheive this. I apologize for the trouble..this would be of great help to me.
Thanks
Karthik

Problems with verifying email address and SMTP set...

I have recently moved over to BT Infinity Broadband and regularly work from home. Recently I have been unable to send work emails (provided by 123 Reg) and having searched the forums I found a solution by using ny btinternet login details and verifying my email address.
However I have been able to verify two of my work email addresses but not the main and most important one. Each time I try I get an "invalid email address" error message. This is not causing too many problems with Outlook 2010 as I can still send and receive emails at present, hopefully this will remain.
However I do also use a case management software which sends emails. It requires a SMTP server details and port number. I have replicated these with the ones from Outlook, mail.btinternet.com and port number 465 but I am unable to send any emails.
I would be grateful if anybody could help me to verify my email address and also suggest what settings I would need for my case management software.
Many Thanks,
Will

I am a BT Premium Mail customer for my BT Talk21 e-mail account.
All was working fine on my PC and on my Mobile when I left the UK on 18t Sept.
In Greece, I was accessing e-mails, and responding to them, via the COSMOTE mobile network.
The problem started around 1st October, when I found that I could not reply to e-mails via my phone ("Sending Failed") - it would sometimes work if I switched my phone off an back on again, but I just couldn't send e-mails from my Android phone.
On my return to the UK, on 3rd Oct, I found that I couldn't send e-mails via my Outlook 2010 client on my Windows 7 Computer, directly connected to my router- getting error message 522 (account set up as POP3)
Test message returns:
"Send test e-mail message: Your outgoing (SMTP) e-mail server has reported an internal error. If you continue to receive this message, contact your server administrator or Internet service provider (ISP). The server responded: 522 Your message has not been sent as you are accessin"
So, 2 separate devices, connected differently, where experiencing the same problem - the commonality BT E-mail severs.
I spent 2 days of absolute hell with BT's Indian call centres who were worse than useless - refusing to accept that this was a BT sever-related issue.
VOL 012-*********** – 4th Oct
VOL 012-*********** – 4th Oct
On my Mobile, as a test, I deleted my (POP3) mobile account on my phone, the idea to re-instate it.
On trying to set it up again, the BT mails servers wouldn't allow me to set it up as POP3 (even though up until the point of the problem it was POP3).
However, it eventually allowed me to set it up as SMTP/IMAP - and I can now send and recieve e-mails on my Talk21 account on my mobile. Although, being IMAP/SMTP it now deletes mails off the server if I delete them on my phone - which I found out the hard way.
My Outlook client on my computer still cannot send e-mails - returning the error code 522.
I have also accessed my account via webmail (which seems to work both ways) and have changed and verified my passwords, but the problem still exists.
In addition, my daughter also has a Talk21 Premium Mail account, and accessing via a different computer Microsoft Mail on a Vista machine, and she is experiencing the same problem.
I find out today that BT is withdrawing from Yahoo and is changing/has changed it's e-mail systems.
The problems I and my daughter are experiencing appear to be general BT Mail Server problems that need to addressed centrally, and not a single-user level as the likelihood is that many are affected.
I would like BT to look into this as a matter of urgency.

Problems with group email?????????

I am trying to send email to a group i have created...it keeps coming back saying that it does not conform to "RFC28222 standard".....i have checked with server and they say it has to be a "Mail" problem......i have done this a lot with my old mac but with this new one i can't.....can anyone please help me through this problem...

The problem is probably that there is something wrong with one or more of the recipients, e.g. an invalid email address, or an extraneous character somewhere, or something like that.

ITunes Download problems with old email address

iTunes will not download purchased or imported music currently on my list in iTunes that I imported or purchased when I had a different email address (that no longer exists). I can not add it as a verifying email won't be accepted. This occurred when I purchased iPhone 4 with ios5 and had to load iTunes. How do I correct?

Hello Chief Weasel,
The article linked below details how to go about changing the primary, alternate and notification e-mail addresses used with your wife's Apple ID.
Primary email address
Every Apple ID account has one primary email address, and that address is your Apple ID. When you create an Apple ID, you enter the primary address to use as your Apple ID.
Your primary address is also the contact email address for your account. Check it regularly, because it receives email that you need to manage your account. For example, before you can use a new or changed Apple ID, you need to verify it as directed in a verification email that Apple sends to that address. Didn't receive the email?
Manage your Apple ID primary, rescue, alternate, and notification email addresses
http://support.apple.com/en-us/HT201356
Cheers,
Allen

Problem with former email addresses appearing as options when addressing emails.

When I am typing in the name of the person I want to send an email to in Apple Mail version 3.6, all former addresses will appear for me to choose from, and before I know it I am sending emails to someone's old email address all the time.
How do you get rid of old email addresses so they won't appear as options when you are trying to send an email?
I'm using an older MacBook w/ OS X version 10.5.8, which I'm not sure if it makes a difference with my problem.
Help me, please!!!

Thx so much, Christopher. I am finding out that there are several ways to deal with this issue, and it seems like there's a few different things I need to do. I am finding some under different related questions, but yours was helpful, too.
I went to Windows > Previous Recepients
and sorted and removed old addresses from there
But I also needed to go to address book and found an incorrect address for the spouse of my recipient, so I needed your solution, too.
It was also suggested that I
Right click on the old mail address when it appears when starting a new mail message, then click
remove from previous recipents list
I'll be doing all of these as it comes up.
Thanks again! I'm new to this support community, and am impressed!

Problems with old email address

My wife has changed her email and the old email address is no longer functional. How does she change the email address that is linked to her Apple account and therefore the iTunes store and give herself a new password if necessary?

Hello Chief Weasel,
The article linked below details how to go about changing the primary, alternate and notification e-mail addresses used with your wife's Apple ID.
Primary email address
Every Apple ID account has one primary email address, and that address is your Apple ID. When you create an Apple ID, you enter the primary address to use as your Apple ID.
Your primary address is also the contact email address for your account. Check it regularly, because it receives email that you need to manage your account. For example, before you can use a new or changed Apple ID, you need to verify it as directed in a verification email that Apple sends to that address. Didn't receive the email?
Manage your Apple ID primary, rescue, alternate, and notification email addresses
http://support.apple.com/en-us/HT201356
Cheers,
Allen

Do mail merge with group from address book or other file?

Is there a way to have Mail do a merge with a spreadsheet, a Filemaker file or the Address Book ( a group) so that every email looks personalized? Dear <name>,
blah, blah, blah
I need to send out an email to about 150 faculty and staff. Messages sent to a list often get ignored or deleted unread. I need these to be read.
Thx
G5 Dual 2.7 GHz Mac OS X (10.4.7)

What is the exact message you get when sending fails -- does it say there are one or more invalid addresses, or what?
Having a name in the list without email address or possibly one separated by comma between last and first might result similarly in an invalid address, and Mail will likely refuse to send to any. But if the message is from the SMTP, that might depend on the provider's policies for that.
Ernie

Has Apple fixed 802.1x security problems with new apps?

Previous versions of the software are unable to connect to many wi-fi networks due to poor support for enterprise security standards. This means that it is impossible to connect to many corporate or university networks. It also means that I cannot connect in the Air Canada lounges with the DataValet service that I normally use. It makes little sense to buy these apps when the underlying wi-fi service is so crippled.
Does anyone know if 802.1x is properly supported now?

Either there's a [secret in 1.1.3 that no one knows about except you|http://digg.com/apple/No802_1x_in_iPhone_patch_1_1_3_Where_is_the_loveApple], or you're confusing [802.1x|http://en.wikipedia.org/wiki/802.1x] and [802.11|http://en.wikipedia.org/wiki/802.11].

Element v.11 & 9 Photo mail problem with MS Outlook

Looking for a fix: Elements v.11 has a photo mail problem with Microsoft Outlook mail, even when Outlook is designated the defaul e-mail program in Windows internet.
Is there a fix?? Thanks.

I just posted the same problem and so I'll join this thread, hoping to see an answer to your question. By the way, this PSE11 feature worked fine for me with Outlook 2007, but stopped working when I upgraded to Outlook 365.

Has Yosemite fixed Maverick's Mail problem with Group email addresses?

Similar Messages

Maybe you are looking for