Hash for Lightroom_5_LS11.exe (windows LR5 update)

Can someone provide me an MD5 for Lightroom_5_LS11.exe so I can verify download integrity?  My downloads keep getting corrupted, and I want to be able to confirm a good download, if and when I get that.  Thanks
PS: Could be any hash: CRC, SHA-1, etc.

Hi danburn,
The MD5 checksum for Lightroom 5 is : 5AC3F3644F8150F369BE6FABD4C6A03D
For corrupted downloads issue try downloading from the direct download links available at : http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html
But make sure you follow the important steps mentioned on the page before initiating the download.

Similar Messages

  • Central Output Server View Manager on Windows 7, need patch for jfPreview.exe

    Where can I obtain the latest version of JfPreView.exe?
    According to the following webpage:
    http://helpx.adobe.com/legacy/kb/central-central-pro-output-server-1.html
    Adobe Central and Central Pro Output Server 5.7, Windows support extended to Windows 7 (32/64 bit) and Windows Server 2008 R2 (64 bit)
    Issue 2 on this page is the problem that I am having:
    Issue 2
    View manager is a client application for Central Pro. When it is installed on Windows 7 (32/64 bit) and Windows Server 2008 (64 bit), it doesn't work properly.
    For Windows 7 and Windows Server 2008R2, IPv6 is installed and enabled by default. On a machine running the Central Preview Agent with IPv4 protocol, the Preview Agent fails to transfer the files. The Preview Agent also reports the following error in the jfserver.log.
    “Fails. Exception:  [1005] Connect to <host> failed: 10060”
    Solution
    A patch for JfPreView.exe.exe is available from Adobe enterprise support to address this issue.
    I need this patch.
    Thank you

    I have loaded KB2937636 to the server2012 wsus/sup but that still did not fix the communication issue.  I have since removed the KB2937636 from the 2012 server, because when the KB2937636 is installed on the sup server once the 7.6.7600.256 computers
    communicate with the server the WUA 7.6.7600.320 gets installed on the clients and then they stop communicating.  Very Frustrating!
    Please any help would be greatly appreciated.  
    Thanks
    ~ZbWinMan
    I have attached my WindowsUpdate.log file.  When I used CMTrace.exe you can clearly see that the computer talks fine at the beginning, then I installed WUA 7.6.7600.320 and All Communication breaks, then I uninstall to get back to 7.6.7600.256 and communication
    works again.
    If I uninstall 7.6.7600.320 then the computer communicates back to the SUP server.
    so you're using SSL? (port 8531)
    weird things might happen when in SSL if hastily configured, causing this weird error, like this for example:
    http://social.technet.microsoft.com/Forums/en-US/5d6ae350-9714-471f-aa67-375e657caa11/windows-update-cant-connect-to-wsus-server-which-happens-to-be-itself-after-switch-to-ssl?forum=winserverwsus
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

    How to prevent iTunes for Windows from "Updating iTunes Library"?
    My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
    Thanks for any help/suggestions.

    Connect the PC to the library on the NAS. Wait while "updated".
    Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
    Close iTunes on the PC. Do not open iTunes on the Mac.
    Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
    Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
    The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
    Open iTunes on the Mac. It will update again, but that should be last time.
    tt2

  • Windows Vista Update posts 64bit driver for Qosmio F30 32bit Vista

    Hello
    Today I've noticed that Windows Vista update is posting the wrong update for one of Qosmio F30 drivers.
    I have Windows Vista 32Bit but Windows Update post a 64bit version of the driver.
    see the screenshot [Here|http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]
    Any idea?

    hmm... this is strange ?:|
    The Toshiba x64 ACPI compliant driver means definitely a 64bit version!!!
    I dont know why the Vista driver update notification reports an 64bit driver for a 32bit OS but usually the 64bit driver shouldn't be compatible with the 32bit OS.
    However, the case seems to be clear dont install it if the driver is not designed for your OS.
    Regards

  • Update for Microsoft Visual C++ 2012 Update on Windows 7

    I received the Update for Microsoft Visual C++ 2012 Update 4 Redistributable Package (KB3032622).  The installation failed. Here are the details
    Installation date: ‎2/‎10/‎2015 8:35 PM
    Installation status: Failed
    Error details: Code FF
    Update type: Important
    If you use Visual Studio 2012 RTM product to build C++ apps and use certain functionality from the C++ Standard Template Library in your projects, then you might run into a runtime failure similar to the following:
              "The procedure entry point_ crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll"
              This was caused due to certain missing function exports in the runtime DLL msvcr110.dll that shipped with VS2012 RTM.  This problem was eventually fixed in Visual Studio 2012 Update 4.  This article
    ensures that the correct runtime DLLs are provided to all users who had previously installed the faulty DLLs from Visual Studio 2012 RTM
    More information:
    http://go.microsoft.com/fwlink/?LinkID=525548
    Help and Support:
    http://support.microsoft.com
    I tried to run the update troubleshooter, but it did not help.  I tried Microsoft Fixit50123, but that did not solve the problem either.
    Little Old Prof

    Hi Little Old Prof，
    I’ve noticed that similar case occurs on this 2/10/2015 update (KB3032622) in some environments. But still a small number.
    And we suggest you run the Windows Update Troubleshooter first and check if there is something need to fix.
    After that please recheck if this update still in your list of updates to be applied.
    Open the Windows Update troubleshooter
    http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-8
    And again, we would appreciate it if you could send us right cbs log file for our reference. Turns out the CBS log you sent to us was ending at 19:01 2/10/2015 and your error occurred at 20:35 2/10/2015.
    Regards
    D. Wu

  • Encountered error r6034, runtime error, window error 1114 for itune 11.1.4 update.

    encountered error r6034, runtime error, window error 1114 for itune 11.1.4 update. Same error msgs for when I tried to uninstall and reinstall as suggested.
    pls advise if you have another solution to it... thx

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99512)

  • Equium A110-276 BIOS update for 32-bit Windows 7

    Hello all, I'd like to update the BIOS on my Equium A110-276 and the two choices are 'OS Independent' and 'Windows Vista 32 Bit'. I have Windows 7 32-bit on this laptop. If I choose 'OS Independent' it warns me 'This Bios is NOT compatible for Notebooks with Windows Vista!!!' and if I choose 'Windows Vista 32 Bit' it reads 'This Bios is only compatible for Notebooks with Windows Vista!!!'
    The exclamation marks are from Toshiba, not me ;)
    So am I stuffed and need to stay with my current BIOS, or can I use the Windows Vista BIOS update?
    Thanks to all who can help!

    Hi Paolo30
    I've been having some problems with the fan, and before I bring it in for repair I wanted to try all options. It appears to be seated/connected fine, the area around it is clean, I've done all of the fan-related troubleshooting I can except the last option which is to re-flash the BIOS which a number of people have had success with (with regards to the fan).
    The original OS is Windows XP so I'd have to recover it back to XP and then re-update to Windows 7 and I'd rather have surgery than do that again! If it's not in the cards then it's a trip to the repair shop, I reckon. Thanks for responding!

  • "Arrange new window" (thumbnail window for digital painting) does not update

    Hi,
    I have an issue with Photoshop CC V2014.2.1 release where if I open a new document, then create a duplicate window of that document (Window->Arrange->New window for "Document.psd") if I am working on the original window, the duplicate window does not update any brush strokes until I select the duplicate window or perform an undo command.
    On previous versions (CS4 & CS5) the 2nd window would update each brush stroke automatically.
    I have looked for options to auto-update the 2nd window, but can't find anything. Is this a bug or am I missing an option?
    Thanks,
    Tim

    Well there is feedback http://www.apple.com/feedback/itunesapp.html and if you have an AppleID there is a "bug reporter" http://bugreporter.apple.com/.

  • No Windows 10 update for V3-571G

    Hello, Was eagerly waiting for Windows 10 update starting 29th July, but noticed Acer V3-571G is not included in the support list for drivers. Is there any chance this list will be updated later on?

    i have acer v3-571g too and i'm waitng for update. for the first time windows can be updated for free, and Acer is causing trouble. i don't understand it  I just found a way to update. try this http://www.microsoft.com/en-us/software-download/windows10

  • My photoshop elements12 will not update says error and contact adobe but not open now for help.  windows vista

    my photoshop elements12 will not update says error and contact adobe but not open now for help.  windows vista

    I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
    The Nikon D60 was first supported in Adobe Camera Raw 4.4.
    Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
    If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer?

  • Preparing for Large Batch of Windows Server Updates going back to Aug 2013

    How often do updates to Windows servers interfere with a servers performance, services, and/or software?
    In other words, after installing updates, what level of validation should be involved in making sure the updates are not causing issues on the server? With such a large batch of updates to install this weekend, I want to be prepared for worst case scenarios
    involving systems not booting up, required services not starting, software conflicts, etc. We have a 2008R2 server and a 2003 server to test on, but they're not really representative of the production servers in terms of the roles they play and services they
    run. Just to clarify, this is my first time updating Windows servers.

    1. There is a long term mantra: Test updates in test environment before applying updates in production systems.
    2. Situation is complicated a bit by the fact that there are "direct"  and WSUS update packages.
    3. MS states that updates are tested thoroughly. I do believe they do a good job.
    4. I work with Windows for a very long period and I am pretty sure that the quality of software including updates is increasing.
    5. I understand your hesitation, my first updates caused the same tension.
    6. You have a possibility to download updates for "direct" application from catalog update repository. Problem is that you do not know the optimal order of installation. Fortunately information on problems and their solution comes fast from Internet if you
    listen on right channels.
    7. From my point of view the danger stems from some optional updates, namely drivers may send your server to unexpected operation. I do prefer drivers and firmware from server/computer vendor, though some irregularities exists.
    HTH
    Milos

  • Thanks HP Support For Nothing - Windows 10 Update - Laptop Issues!

    I am one of many who has posted on here over the past couple about the issues with laptops shutting down / going into sleep after the Windows 10 update last week. There are now so many threads on the HP Forums I’ve lost count. I’ve tried all the recommended tricks, including updating the BIOS Driver from the HP Website, but nothing works! I’ve also updated all other drivers. I’ve spoken to HP Support who couldn’t care less about the issue and are not working on a fix – they seem to blame Microsoft for the problem and tell me to speak to them! Better still return my laptop back to the shop because it is still under warranty. Thanks HP for being supportive with this problem. BTW being informed that you are now telling people not to update to Windows 10 until Microsoft have ironed out the bugs and created fixes is really not helpful! Perhaps I’ll think again about buying a HP product in the future. Really poor customer service!

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and see that you are having issue with your Notebook PC. I would be happy to assist you. I just need your specific Model Numbers (How Do I Find My Model Number or Product Number?).  After reading your post on the HP Support Forums, I believe that you are having two issues on your Notebook PC's, after your Windows 10 upgrade. You had mentioned that your HP Recovery could not open when you were logged into your Microsoft Account. You also mentioned that on your Notebook PC's it is showing you as "Standard" and not the "Administrator".  I did some research for you and I found a document called HP PCs - Managing User Accounts and Logins (Windows 10). The information in this document describes the different account types in Windows 10, and explains how to change account types and how to save and change passwords. Just so I understand correctly, is it the HP System Recovery that will not open? Please follow the document provided and re-post with any information or results.  Thanks!

  • Not getting Windows 10 update notification for my acer aspire V3 571G

    The aspire V3 571G is not listed in the qualified models for the Windows 10 update. Why is it so? When will I get the Windows 10 update? Windows 10 update Qualified Products

    Hello, "Acer will provide driver support for the following products that qualify for the Windows update"

  • Think I found the fix for no downloading windows updates for HP Printers problem.

    I thought I'd post a new topic here. I've figured out whats gone wrong with the windows 10 updates. Someone wrote about it in his thread (I forget the thread url though), and it worked. I've done this on 2 PC's.. W7 to W10, and W8.1 to W10. What you have to do is; 1. Go to device manager. Look down the list for Printers. Open up that arrow and see if you're printer is listed there? If it's listed as Unknown Device then; 2. Go to the HP website and find the driver for your printer on there. Download it through the website / program as though you was installing your printer for the first time i.e. it should check the connection of you're printer during this process. 3. Now you have your printer driver re-installed. Go back to Device manager and check that it now appears listed by the correct name in the Printer section. 3a. If there are other unknown devices besides your printer listed, you need to delete the other unknown devices, leaving only your printer listed. 4. Go back to windows update and retry a windows update (it asks you to install the old failed ones first, so try it, expecting failure, then press the retry button. 5. If all went well, it shouldn't list anymore updates, and you're done!

    LuisFL29 wrote:
    Well, I was still showing them after 10.5.2, I'm not sure if this was the case for everybody. I wonder if anyone out there still see the warnings. Ahh, sorry I meant warning not errors.
    The only one I had was for the remote desktop and that disappeared with 10.5.2
    I also installed 10.5.1 combo update and that took out all but the remote desktop warning.
    If you have others, then be careful how you fix them.
    Most of us have gotten rid of all of them using the combo updates.
    Now, if only it wouldn't take 5 minutes to verify permissions ..
    See if you can come up with a fix for that

Maybe you are looking for