Hauppauge 850 works, but not through MythTV!

I have a Hauppauge 850 (model 72301, 2040:7240). I have loaded the necessary drivers, and firmware. I can get video working just fine in tvtime (no audio, but I hear that this is normal), VLC works through DVB, but the MythTV program seems to be incapable of accessing my tuner.
MythTV sees it as a Hauppauge 850, sets everything up fine, but then does not seem to be able to access the tuner. The frontend spits out:
Error opening jump program file buffer.
Indeed, it does create several 0 byte files with a .mpg extension.
The backend logs the following:
2014-02-26 10:52:28.269652 C [27149/27149] thread_unknown mythcommandlineparser.cpp:2594 (ConfigureLogging) - mythbackend version: tag: v0.27 [317d5b7] www.mythtv.org
2014-02-26 10:52:28.269682 C [27149/27149] thread_unknown mythcommandlineparser.cpp:2596 (ConfigureLogging) - Qt version: compile: 4.8.5, runtime: 4.8.5
2014-02-26 10:52:28.269686 N [27149/27149] thread_unknown mythcommandlineparser.cpp:2598 (ConfigureLogging) - Enabled verbose msgs: general
2014-02-26 10:52:28.269761 N [27149/27149] thread_unknown logging.cpp:914 (logStart) - Setting Log Level to LOG_INFO
2014-02-26 10:52:28.270375 I [27149/27150] Logger logging.cpp:315 (run) - Added logging to the console
2014-02-26 10:52:28.270429 I [27149/27149] thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) - Setup Interrupt handler
2014-02-26 10:52:28.270437 I [27149/27149] thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) - Setup Terminated handler
2014-02-26 10:52:28.270442 I [27149/27149] thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) - Setup Segmentation fault handler
2014-02-26 10:52:28.270447 I [27149/27149] thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) - Setup Aborted handler
2014-02-26 10:52:28.270452 I [27149/27149] thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) - Setup Bus error handler
2014-02-26 10:52:28.270457 I [27149/27149] thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) - Setup Floating point exception handler
2014-02-26 10:52:28.270463 I [27149/27149] thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) - Setup Illegal instruction handler
2014-02-26 10:52:28.270470 I [27149/27149] thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) - Setup Real-time signal 0 handler
2014-02-26 10:52:28.270497 N [27149/27149] thread_unknown mythdirs.cpp:55 (InitializeMythDirs) - Using runtime prefix = /usr
2014-02-26 10:52:28.270507 N [27149/27149] thread_unknown mythdirs.cpp:68 (InitializeMythDirs) - Using configuration directory = /home/hydra/.mythtv
2014-02-26 10:52:28.270566 I [27149/27149] CoreContext mythcorecontext.cpp:249 (Init) - Assumed character encoding: en_US.UTF-8
2014-02-26 10:52:28.270996 N [27149/27149] CoreContext mythcontext.cpp:504 (LoadDatabaseSettings) - Empty LocalHostName.
2014-02-26 10:52:28.271002 I [27149/27149] CoreContext mythcontext.cpp:512 (LoadDatabaseSettings) - Using localhost value of poisonous
2014-02-26 10:52:28.291475 N [27149/27149] CoreContext mythcorecontext.cpp:1294 (InitLocale) - Setting QT default locale to en_CA
2014-02-26 10:52:28.291538 I [27149/27149] CoreContext mythcorecontext.cpp:1327 (SaveLocaleDefaults) - Current locale en_CA
2014-02-26 10:52:28.291572 N [27149/27149] CoreContext mythlocale.cpp:121 (LoadDefaultsFromXML) - Reading locale defaults from /usr/share/mythtv//locales/en_ca.xml
2014-02-26 10:52:28.302646 I [27149/27149] CoreContext schemawizard.cpp:118 (Compare) - Current MythTV Schema Version (DBSchemaVer): 1317
2014-02-26 10:52:28.303698 I [27149/27149] CoreContext mythtranslation.cpp:65 (load) - Loading en_ca translation for module mythfrontend
2014-02-26 10:52:28.304801 N [27149/27149] CoreContext main_helpers.cpp:582 (run_backend) - MythBackend: Starting up as the master server.
2014-02-26 10:52:28.346306 I [27149/27149] CoreContext recorders/v4lchannel.cpp:558 (SetInputAndFormat) - V4LChannel[3](/dev/video0): SetInputAndFormat(2, NTSC) (v4l v2) input_switch: 0 mode_switch: 1
2014-02-26 10:52:28.502215 I [27149/27150] Logger logging.cpp:474 (initialTimeout) - Added logging to mythlogserver at TCP:35327
2014-02-26 10:52:33.065716 I [27149/27149] CoreContext recorders/v4lchannel.cpp:558 (SetInputAndFormat) - V4LChannel[3](/dev/video0): SetInputAndFormat(2, NTSC) (v4l v2) input_switch: 0 mode_switch: 1
2014-02-26 10:52:33.561195 W [27149/27149] CoreContext recorders/dtvchannel.cpp:307 (SetChannelByString) - DTVChan[3](/dev/video0): SetChannelByString(37): You have not set an external channel changing
script for a composite or s-video input. Channel changing will do nothing.
2014-02-26 10:52:33.601147 I [27149/27149] CoreContext programinfo.cpp:2147 (CheckProgramIDAuthorities) - Found 0 distinct programid authorities
2014-02-26 10:52:33.601443 I [27149/27260] Scheduler mythdbcon.cpp:436 (getStaticCon) - New static DB connectionSchedCon
2014-02-26 10:52:33.601532 I [27149/27149] CoreContext housekeeper.cpp:571 (RegisterTask) - Registering HouseKeeperTask 'LogClean'.
2014-02-26 10:52:33.601571 I [27149/27149] CoreContext housekeeper.cpp:571 (RegisterTask) - Registering HouseKeeperTask 'DBCleanup'.
2014-02-26 10:52:33.601602 I [27149/27149] CoreContext housekeeper.cpp:571 (RegisterTask) - Registering HouseKeeperTask 'ThemeUpdateNotifications'.
2014-02-26 10:52:33.601638 I [27149/27149] CoreContext housekeeper.cpp:571 (RegisterTask) - Registering HouseKeeperTask 'RecordedArtworkUpdate'.
2014-02-26 10:52:33.604320 I [27149/27149] CoreContext housekeeper.cpp:571 (RegisterTask) - Registering HouseKeeperTask 'MythFillDB'.
2014-02-26 10:52:33.604360 I [27149/27149] CoreContext housekeeper.cpp:571 (RegisterTask) - Registering HouseKeeperTask 'JobQueueRecover'.
2014-02-26 10:52:33.604378 I [27149/27149] CoreContext housekeeper.cpp:571 (RegisterTask) - Registering HouseKeeperTask 'HardwareProfiler'.
2014-02-26 10:52:33.605123 I [27149/27149] CoreContext housekeeper.cpp:637 (Start) - Queueing HouseKeeperTask 'HardwareProfiler'.
2014-02-26 10:52:33.605134 I [27149/27149] CoreContext housekeeper.cpp:637 (Start) - Queueing HouseKeeperTask 'RecordedArtworkUpdate'.
2014-02-26 10:52:33.605139 I [27149/27149] CoreContext housekeeper.cpp:637 (Start) - Queueing HouseKeeperTask 'ThemeUpdateNotifications'.
2014-02-26 10:52:33.605149 I [27149/27149] CoreContext housekeeper.cpp:644 (Start) - Starting HouseKeeper.
2014-02-26 10:52:33.607564 I [27149/27263] HouseKeeping housekeeper.cpp:132 (Run) - Running HouseKeeperTask 'HardwareProfiler'.
2014-02-26 10:52:33.611078 I [27149/27149] CoreContext serverpool.cpp:399 (listen) - Listening on TCP 127.0.0.1:6544
2014-02-26 10:52:33.611160 I [27149/27149] CoreContext serverpool.cpp:399 (listen) - Listening on TCP [::1]:6544
2014-02-26 10:52:33.611245 I [27149/27149] CoreContext serverpool.cpp:399 (listen) - Listening on TCP [fe80::225:22ff:fe64:1bc1%eth0]:6544
2014-02-26 10:52:33.611272 I [27149/27263] HouseKeeping housekeeper.cpp:136 (Run) - HouseKeeperTask 'HardwareProfiler' Failed.
2014-02-26 10:52:33.611923 I [27149/27263] HouseKeeping housekeeper.cpp:132 (Run) - Running HouseKeeperTask 'RecordedArtworkUpdate'.
2014-02-26 10:52:33.611962 I [27149/27263] HouseKeeping backendhousekeeper.cpp:457 (DoRun) - Performing Artwork Refresh: /usr/bin/mythmetadatalookup --refresh-all-artwork --verbose general --logpath /home/hydra --loglevel info
2014-02-26 10:52:33.613312 I [27149/27268] SystemManager mythsystemunix.cpp:275 (run) - Starting process manager
2014-02-26 10:52:33.613477 I [27149/27269] SystemSignalManager mythsystemunix.cpp:510 (run) - Starting process signal handler
2014-02-26 10:52:33.613563 I [27149/27270] SystemIOHandlerR mythsystemunix.cpp:91 (run) - Starting IO manager (read)
2014-02-26 10:52:33.613594 I [27149/27271] SystemIOHandlerW mythsystemunix.cpp:91 (run) - Starting IO manager (write)
2014-02-26 10:52:33.617424 N [27149/27149] CoreContext mediaserver.cpp:168 (Init) - MediaServer:: Loopback address specified - 127.0.0.1. Disabling UPnP
2014-02-26 10:52:33.617488 I [27149/27149] CoreContext main_helpers.cpp:668 (run_backend) - Main::Registering HttpStatus Extension
2014-02-26 10:52:33.621664 I [27149/27149] CoreContext serverpool.cpp:399 (listen) - Listening on TCP 127.0.0.1:6543
2014-02-26 10:52:33.621736 I [27149/27149] CoreContext serverpool.cpp:399 (listen) - Listening on TCP [::1]:6543
2014-02-26 10:52:33.621797 I [27149/27149] CoreContext serverpool.cpp:399 (listen) - Listening on TCP [fe80::225:22ff:fe64:1bc1%eth0]:6543
2014-02-26 10:52:33.625115 N [27149/27149] CoreContext autoexpire.cpp:264 (CalcParams) - AutoExpire: CalcParams(): Max required Free Space: 1.0 GB w/freq: 15 min
2014-02-26 10:52:34.190304 I [27149/27307] ProcessRequest mainserver.cpp:1430 (HandleAnnounce) - MainServer::ANN Monitor
2014-02-26 10:52:34.190313 I [27149/27307] ProcessRequest mainserver.cpp:1432 (HandleAnnounce) - adding: poisonous as a client (events: 0)
2014-02-26 10:52:34.191612 I [27149/27307] ProcessRequest mainserver.cpp:1430 (HandleAnnounce) - MainServer::ANN Monitor
2014-02-26 10:52:34.191618 I [27149/27307] ProcessRequest mainserver.cpp:1432 (HandleAnnounce) - adding: poisonous as a client (events: 1)
2014-02-26 10:52:34.394345 I [27149/27307] ProcessRequest mainserver.cpp:1430 (HandleAnnounce) - MainServer::ANN Monitor
2014-02-26 10:52:34.394357 I [27149/27307] ProcessRequest mainserver.cpp:1432 (HandleAnnounce) - adding: poisonous as a client (events: 0)
2014-02-26 10:52:34.396116 I [27149/27307] ProcessRequest mainserver.cpp:1430 (HandleAnnounce) - MainServer::ANN Monitor
2014-02-26 10:52:34.396129 I [27149/27307] ProcessRequest mainserver.cpp:1432 (HandleAnnounce) - adding: poisonous as a client (events: 1)
2014-02-26 10:52:34.565750 I [27149/27263] HouseKeeping backendhousekeeper.cpp:473 (DoRun) - Artwork Refresh Complete
2014-02-26 10:52:34.565776 I [27149/27263] HouseKeeping housekeeper.cpp:140 (Run) - HouseKeeperTask 'RecordedArtworkUpdate' Finished Successfully.
2014-02-26 10:52:34.567094 I [27149/27263] HouseKeeping housekeeper.cpp:132 (Run) - Running HouseKeeperTask 'ThemeUpdateNotifications'.
2014-02-26 10:52:35.466769 I [27149/27263] HouseKeeping housekeeper.cpp:140 (Run) - HouseKeeperTask 'ThemeUpdateNotifications' Finished Successfully.
2014-02-26 10:52:36.613356 I [27149/27260] Scheduler scheduler.cpp:2094 (HandleReschedule) - Reschedule requested for MATCH 0 0 0 - SchedulerInit
2014-02-26 10:52:36.642481 I [27149/27260] Scheduler scheduler.cpp:2207 (HandleReschedule) - Scheduled 0 items in 0.0 = 0.01 match + 0.00 check + 0.01 place
2014-02-26 10:52:36.643871 I [27149/27260] Scheduler scheduler.cpp:2274 (HandleRunSchedulerStartup) - Scheduler: Seem to be woken up by USER
2014-02-26 10:52:47.912670 I [27149/27307] ProcessRequest mainserver.cpp:1430 (HandleAnnounce) - MainServer::ANN Playback
2014-02-26 10:52:47.912692 I [27149/27307] ProcessRequest mainserver.cpp:1432 (HandleAnnounce) - adding: poisonous as a client (events: 0)
2014-02-26 10:52:47.916439 I [27149/27259] TVRecEvent tv_rec.cpp:1048 (HandleStateChange) - TVRec[3]: Changing from None to WatchingLiveTV
2014-02-26 10:52:47.921208 I [27149/27259] TVRecEvent tv_rec.cpp:3597 (TuningCheckForHWChange) - TVRec[3]: HW Tuner: 3->3
2014-02-26 10:52:47.957496 I [27149/27259] TVRecEvent recorders/v4lchannel.cpp:558 (SetInputAndFormat) - V4LChannel[3](/dev/video0): SetInputAndFormat(2, NTSC) (v4l v2) input_switch: 0 mode_switch: 1
2014-02-26 10:52:52.635974 N [27149/27261] Expire autoexpire.cpp:641 (SendDeleteMessages) - Expiring 0 MB for 1000 at 2014-02-26T15:48:29Z =>
2014-02-26 10:52:52.636082 N [27149/27261] Expire autoexpire.cpp:641 (SendDeleteMessages) - Expiring 0 MB for 1000 at 2014-02-26T15:48:30Z =>
2014-02-26 10:52:52.636153 N [27149/27261] Expire autoexpire.cpp:641 (SendDeleteMessages) - Expiring 0 MB for 1000 at 2014-02-26T15:48:45Z =>
2014-02-26 10:52:52.696252 W [27149/27259] TVRecEvent recorders/dtvchannel.cpp:307 (SetChannelByString) - DTVChan[3](/dev/video0): SetChannelByString(37): You have not set an external channel changing
script for a composite or s-video input. Channel changing will do nothing.
2014-02-26 10:52:53.863541 N [27149/27149] CoreContext autoexpire.cpp:264 (CalcParams) - AutoExpire: CalcParams(): Max required Free Space: 2.0 GB w/freq: 15 min
2014-02-26 10:52:53.870234 N [27149/27149] CoreContext autoexpire.cpp:264 (CalcParams) - AutoExpire: CalcParams(): Max required Free Space: 2.0 GB w/freq: 15 min
2014-02-26 10:52:58.594384 E [27149/27539] RecThread recorders/mpegrecorder.cpp:756 (set_ctrls) - mpegrecorder.cpp:set_ctrls(): Could not set Audio Sampling Frequency to 2
eno: Invalid argument (22)
2014-02-26 10:52:58.594427 E [27149/27539] RecThread recorders/mpegrecorder.cpp:756 (set_ctrls) - mpegrecorder.cpp:set_ctrls(): Could not set Audio Encoding to 1
eno: Invalid argument (22)
2014-02-26 10:52:58.594462 E [27149/27539] RecThread recorders/mpegrecorder.cpp:756 (set_ctrls) - mpegrecorder.cpp:set_ctrls(): Could not set Audio L2 Bitrate to 13
eno: Invalid argument (22)
2014-02-26 10:52:58.594489 E [27149/27539] RecThread recorders/mpegrecorder.cpp:756 (set_ctrls) - mpegrecorder.cpp:set_ctrls(): Could not set Video Aspect ratio to 1
eno: Invalid argument (22)
2014-02-26 10:52:58.594533 E [27149/27539] RecThread recorders/mpegrecorder.cpp:756 (set_ctrls) - mpegrecorder.cpp:set_ctrls(): Could not set MPEG Stream type to 0
eno: Invalid argument (22)
2014-02-26 10:52:58.594561 E [27149/27539] RecThread recorders/mpegrecorder.cpp:756 (set_ctrls) - mpegrecorder.cpp:set_ctrls(): Could not set Video Average Bitrate to 4500000
eno: Invalid argument (22)
2014-02-26 10:52:58.594592 E [27149/27539] RecThread recorders/mpegrecorder.cpp:756 (set_ctrls) - mpegrecorder.cpp:set_ctrls(): Could not set Video Peak Bitrate to 6000000
eno: Invalid argument (22)
2014-02-26 10:52:58.658108 E [27149/27602] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.658829 E [27149/27602] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.659584 E [27149/27602] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.660323 E [27149/27602] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.661042 E [27149/27602] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.661776 E [27149/27602] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.661900 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:58.722066 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.722780 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.723483 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.724216 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.724952 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.725712 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.725838 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:58.786168 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.786873 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.787540 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.788273 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.789020 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.789777 E [27149/27603] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.789887 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:58.850138 E [27149/27605] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.850852 E [27149/27605] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.851555 E [27149/27605] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.852290 E [27149/27605] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.853040 E [27149/27605] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.853782 E [27149/27605] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.853906 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:58.914197 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.914911 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.915604 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.916385 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.917119 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.917850 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.917992 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:58.994242 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.994974 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.995714 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.996457 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.997187 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.997919 E [27149/27606] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:58.998043 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:59.058223 E [27149/27608] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.058961 E [27149/27608] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.059728 E [27149/27608] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.060460 E [27149/27608] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.061189 E [27149/27608] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.061923 E [27149/27608] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.062045 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:59.122224 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.122987 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.123754 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.124486 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.125227 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.125955 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.126077 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:59.186228 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.186964 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.187704 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.188433 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.189165 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.189858 E [27149/27609] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.189983 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:59.250127 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.250809 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.251532 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.252268 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.253044 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.253777 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.253900 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:59.314197 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.314914 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.315610 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.316380 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.317086 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.317790 E [27149/27611] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.317920 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:59.393947 E [27149/27613] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.394652 E [27149/27613] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.395388 E [27149/27613] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.396125 E [27149/27613] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.396866 E [27149/27613] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.397602 E [27149/27613] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.397723 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:59.457980 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.458701 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.459393 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.460126 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.460857 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.461590 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.461710 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:59.522062 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.522765 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.523471 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.524205 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.524938 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.525651 E [27149/27614] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:52:59.525771 E [27149/27539] RecThread recorders/mpegrecorder.cpp:1044 (run) - MPEGRec[3](/dev/video0): Device error detected
2014-02-26 10:52:59.586109 E [27149/27616] DeviceReadBuffer recorders/DeviceReadBuffer.cpp:604 (CheckForErrors) - DevRdB(/dev/video0): Problem reading fd(81)
eno: Device or resource busy (16)
2014-02-26 10:53:14.601013 I [27149/27259] TVRecEvent tv_rec.cpp:1048 (HandleStateChange) - TVRec[3]: Changing from WatchingLiveTV to None
2014-02-26 10:53:21.617569 I [27149/27839] ProcessRequest mainserver.cpp:1430 (HandleAnnounce) - MainServer::ANN Playback
2014-02-26 10:53:21.617595 I [27149/27839] ProcessRequest mainserver.cpp:1432 (HandleAnnounce) - adding: poisonous as a client (events: 0)
2014-02-26 10:53:21.632817 I [27149/27839] ProcessRequest mainserver.cpp:1430 (HandleAnnounce) - MainServer::ANN Playback
2014-02-26 10:53:21.632836 I [27149/27839] ProcessRequest mainserver.cpp:1432 (HandleAnnounce) - adding: poisonous as a client (events: 0)
dmesg is a little odd, with loops regarding the xc5000 firmware uploading:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=69993ef8-0ec7-4745-a471-58c7d6002cdb rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e7000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7faffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7fb0000-0x00000000c7fbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c7fc0000-0x00000000c7feffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7ff0000-0x00000000c7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001b7ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A770DE+, BIOS P1.60 05/20/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1b8000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b8000000 aka 7040M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc7fb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1b7e00000-0x1b7ffffff]
[ 0.000000] [mem 0x1b7e00000-0x1b7ffffff] page 2M
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1b4000000-0x1b7dfffff]
[ 0.000000] [mem 0x1b4000000-0x1b7dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1b3ffffff]
[ 0.000000] [mem 0x180000000-0x1b3ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7faffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc7dfffff] page 2M
[ 0.000000] [mem 0xc7e00000-0xc7faffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37a00000-0x37cf7fff]
[ 0.000000] ACPI: RSDP 00000000000fbce0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7fb0000 000040 (v01 052010 RSDT1123 20100520 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7fb0200 000084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7fb0450 0088D8 (v01 AS229 AS229152 00000152 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7fc0000 000040
[ 0.000000] ACPI: APIC 00000000c7fb0390 00007C (v01 052010 APIC1123 20100520 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7fb0410 00003C (v01 052010 OEMMCFG 20100520 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7fc0040 000071 (v01 052010 OEMB1123 20100520 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7fb8d30 000108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: AAFT 00000000c7fb8e40 000027 (v01 052010 OEMAAFT 20100520 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7fb8e70 000DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x1b7ffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x1b7ffffff] -> [mem 0x00000000-0x1b7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1b7ffffff]
[ 0.000000] NODE_DATA [mem 0x1b7ff9000-0x1b7ffdfff]
[ 0.000000] [ffffea0000000000-ffffea0006dfffff] PMD -> [ffff8801b1600000-ffff8801b75fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1b7ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xc7faffff]
[ 0.000000] node 0: [mem 0x100000000-0x1b7ffffff]
[ 0.000000] On node 0 totalpages: 1572686
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12735 pages used for memmap
[ 0.000000] DMA32 zone: 815024 pages, LIFO batch:31
[ 0.000000] Normal zone: 11776 pages used for memmap
[ 0.000000] Normal zone: 753664 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e7000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7fb0000-0xc7fbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7fc0000-0xc7feffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7ff0000-0xc7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xc8000000-0xffefffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801b7c00000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1548090
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=69993ef8-0ec7-4745-a471-58c7d6002cdb rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ bc000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000
[ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
[ 0.000000] Memory: 6045216K/6290744K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 245528K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2793.773 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.36 BogoMIPS (lpj=9312576)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000031] Security Framework initialized
[ 0.000041] AppArmor: AppArmor disabled by boot time parameter
[ 0.000042] Yama: becoming mindful.
[ 0.000489] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003714] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005252] Mount-cache hash table entries: 256
[ 0.005444] Initializing cgroup subsys memory
[ 0.005452] Initializing cgroup subsys devices
[ 0.005454] Initializing cgroup subsys freezer
[ 0.005455] Initializing cgroup subsys net_cls
[ 0.005457] Initializing cgroup subsys blkio
[ 0.005477] tseg: 0000000000
[ 0.005484] CPU: Physical Processor ID: 0
[ 0.005485] CPU: Processor Core ID: 0
[ 0.005487] mce: CPU supports 6 MCE banks
[ 0.005492] LVT offset 0 assigned for vector 0xf9
[ 0.005496] process: using AMD E400 aware idle routine
[ 0.005498] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
[ 0.005565] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
[ 0.006171] ACPI: Core revision 20131115
[ 0.007868] ACPI: All ACPI Tables successfully acquired
[ 0.015657] ftrace: allocating 21057 entries in 83 pages
[ 0.023546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056594] smpboot: CPU0: AMD Phenom(tm) II X6 1055T Processor (fam: 10, model: 0a, stepping: 00)
[ 0.161414] Performance Events: AMD PMU driver.
[ 0.161418] ... version: 0
[ 0.161419] ... bit width: 48
[ 0.161419] ... generic registers: 4
[ 0.161420] ... value mask: 0000ffffffffffff
[ 0.161421] ... max period: 00007fffffffffff
[ 0.161422] ... fixed-purpose events: 0
[ 0.161422] ... event mask: 000000000000000f
[ 0.161457] process: System has AMD C1E enabled
[ 0.161466] process: Switch to broadcast mode on CPU0
[ 0.178362] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.185062] x86: Booting SMP configuration:
[ 0.198273] process: Switch to broadcast mode on CPU1
[ 0.218313] process: Switch to broadcast mode on CPU2
[ 0.238372] process: Switch to broadcast mode on CPU3
[ 0.258412] process: Switch to broadcast mode on CPU4
[ 0.185070] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.278383] x86: Booted up 1 node, 6 CPUs
[ 0.278389] smpboot: Total of 6 processors activated (33538.16 BogoMIPS)
[ 0.278434] process: Switch to broadcast mode on CPU5
[ 0.287329] devtmpfs: initialized
[ 0.291144] PM: Registering ACPI NVS region [mem 0xc7fc0000-0xc7feffff] (196608 bytes)
[ 0.292209] RTC time: 16:07:48, date: 02/26/14
[ 0.292248] NET: Registered protocol family 16
[ 0.292336] cpuidle: using governor ladder
[ 0.292337] cpuidle: using governor menu
[ 0.292342] node 0 link 0: io port [1000, ffffff]
[ 0.292344] TOM: 00000000c8000000 aka 3200M
[ 0.292346] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.292348] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.292351] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.292352] node 0 link 0: mmio [a0000, bffff]
[ 0.292354] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.292355] TOM2: 00000001b8000000 aka 7040M
[ 0.292357] bus: [bus 00-07] on node 0 link 0
[ 0.292358] bus: 00 [io 0x0000-0xffff]
[ 0.292359] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.292360] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.292360] bus: 00 [mem 0xc8000000-0xdfffffff]
[ 0.292361] bus: 00 [mem 0x1b8000000-0xfcffffffff]
[ 0.292460] ACPI: bus type PCI registered
[ 0.292462] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.292520] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.292522] PCI: not using MMCONFIG
[ 0.292523] PCI: Using configuration type 1 for base access
[ 0.292524] PCI: Using configuration type 1 for extended access
[ 0.292729] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.292730] mtrr: probably your BIOS does not setup all CPUs.
[ 0.292731] mtrr: corrected configuration.
[ 0.293185] bio: create slab <bio-0> at 0
[ 0.293359] ACPI: Added _OSI(Module Device)
[ 0.293361] ACPI: Added _OSI(Processor Device)
[ 0.293362] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.293363] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.294656] ACPI: Executed 5 blocks of module-level executable AML code
[ 0.312184] ACPI: Interpreter enabled
[ 0.312195] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.312209] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.312210] ACPI: Using IOAPIC for interrupt routing
[ 0.312231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.312664] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.319963] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.320025] ACPI: No dock devices found.
[ 0.482968] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.482974] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.483123] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.483256] acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.483482] PCI host bridge to bus 0000:00
[ 0.483484] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.483486] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.483488] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.483489] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.483490] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.483492] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
[ 0.483493] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.483503] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[ 0.483516] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.483593] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.483630] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.483661] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.483693] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.483729] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.483758] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.483799] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.483821] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
[ 0.483830] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
[ 0.483840] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
[ 0.483849] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
[ 0.483859] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
[ 0.483869] pci 0000:00:11.0: reg 0x24: [mem 0xf9eff800-0xf9effbff]
[ 0.483890] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.483981] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.483995] pci 0000:00:12.0: reg 0x10: [mem 0xf9efe000-0xf9efefff]
[ 0.484077] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.484100] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.484114] pci 0000:00:12.1: reg 0x10: [mem 0xf9efd000-0xf9efdfff]
[ 0.484196] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.484225] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.484244] pci 0000:00:12.2: reg 0x10: [mem 0xf9eff000-0xf9eff0ff]
[ 0.484331] pci 0000:00:12.2: supports D1 D2
[ 0.484332] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.484364] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.484393] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.484407] pci 0000:00:13.0: reg 0x10: [mem 0xf9efc000-0xf9efcfff]
[ 0.484489] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.484516] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.484530] pci 0000:00:13.1: reg 0x10: [mem 0xf9efb000-0xf9efbfff]
[ 0.484612] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.484641] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.484660] pci 0000:00:13.2: reg 0x10: [mem 0xf9efa800-0xf9efa8ff]
[ 0.484747] pci 0000:00:13.2: supports D1 D2
[ 0.484748] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.484780] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.484812] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.484949] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.484966] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.484975] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.484985] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.484994] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.485004] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.485098] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.485120] pci 0000:00:14.2: reg 0x10: [mem 0xf9ef4000-0xf9ef7fff 64bit]
[ 0.485189] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.485229] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.485277] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.485396] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.485461] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.485487] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.485501] pci 0000:00:14.5: reg 0x10: [mem 0xf9ef9000-0xf9ef9fff]
[ 0.485590] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.485621] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.485680] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.485737] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.485787] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.485839] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.485938] pci 0000:02:00.0: [10de:05e2] type 00 class 0x030000
[ 0.485948] pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.485959] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.485969] pci 0000:02:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.485976] pci 0000:02:00.0: reg 0x24: [io 0xe800-0xe87f]
[ 0.485984] pci 0000:02:00.0: reg 0x30: [mem 0xfeb80000-0xfebfffff pref]
[ 0.492002] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.492018] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.492026] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfebfffff]
[ 0.492037] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.492174] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.492206] pci 0000:01:00.0: reg 0x10: [io 0xd800-0xd8ff]
[ 0.492227] pci 0000:01:00.0: reg 0x18: [mem 0xcffff000-0xcfffffff 64bit pref]
[ 0.492241] pci 0000:01:00.0: reg 0x20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
[ 0.492250] pci 0000:01:00.0: reg 0x30: [mem 0xf9fe0000-0xf9ffffff pref]
[ 0.492301] pci 0000:01:00.0: supports D1 D2
[ 0.492303] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.498679] pci 0000:00:0a.0: PCI bridge to [bus 01]
[ 0.498694] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.498702] pci 0000:00:0a.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.498713] pci 0000:00:0a.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.498875] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.498885] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.498888] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.498889] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.498891] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.498894] pci 0000:00:14.4: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
[ 0.498896] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.552281] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.552320] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
[ 0.552355] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.552388] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.552421] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.552455] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.552489] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15)
[ 0.552521] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.552638] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.552644] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.552666] Found 1 acpi root devices
[ 0.552787] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.552788] vgaarb: loaded
[ 0.552789] vgaarb: bridge control possible 0000:02:00.0
[ 0.552819] PCI: Using ACPI for IRQ routing
[ 0.562147] PCI: pci_cache_line_size set to 64 bytes
[ 0.562153] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.562206] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.562208] e820: reserve RAM buffer [mem 0xc7fb0000-0xc7ffffff]
[ 0.562285] NetLabel: Initializing
[ 0.562286] NetLabel: domain hash size = 128
[ 0.562287] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.562298] NetLabel: unlabeled traffic allowed by default
[ 0.562355] Switched to clocksource refined-jiffies
[ 0.566173] pnp: PnP ACPI init
[ 0.566182] ACPI: bus type PNP registered
[ 0.566217] pnp 00:00: [dma 4]
[ 0.566237] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.566264] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.566280] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.566300] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.566449] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.566503] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.566505] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.566507] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.566612] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.566614] system 00:06: [io 0x040b] has been reserved
[ 0.566615] system 00:06: [io 0x04d6] has been reserved
[ 0.566619] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.566620] system 00:06: [io 0x0c14] has been reserved
[ 0.566622] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.566623] system 00:06: [io 0x0c52] has been reserved
[ 0.566625] system 00:06: [io 0x0c6c] has been reserved
[ 0.566626] system 00:06: [io 0x0c6f] has been reserved
[ 0.566628] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.566629] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.566631] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.566632] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.566634] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.566636] system 00:06: [io 0x0800-0x089f] could not be reserved
[ 0.566637] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.566639] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.566640] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.566642] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.566643] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.566645] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.566647] system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.566649] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.566792] system 00:07: [io 0x0280-0x028f] has been reserved
[ 0.566794] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.566796] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.566830] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.566832] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.619095] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.619099] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.619101] pnp 00:09: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.619103] pnp 00:09: disabling [mem 0x00100000-0xc7ffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.619138] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.619142] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.619228] pnp: PnP ACPI: found 10 devices
[ 0.619229] ACPI: bus type PNP unregistered
[ 0.625290] Switched to clocksource acpi_pm
[ 0.625317] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.625319] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.625322] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfebfffff]
[ 0.625325] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.625329] pci 0000:00:0a.0: PCI bridge to [bus 01]
[ 0.625331] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.625334] pci 0000:00:0a.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.625336] pci 0000:00:0a.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.625339] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.625352] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.625354] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.625355] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.625357] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.625359] pci_bus 0000:00: resource 8 [mem 0xc8000000-0xdfffffff]
[ 0.625360] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.625362] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.625363] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfebfffff]
[ 0.625365] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.625367] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.625368] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.625370] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.625372] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.625374] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.625375] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.625377] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.625378] pci_bus 0000:03: resource 8 [mem 0xc8000000-0xdfffffff]
[ 0.625380] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.625460] NET: Registered protocol family 2
[ 0.625636] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.625866] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.626256] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.626310] TCP: reno registered
[ 0.626320] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.626376] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.626482] NET: Registered protocol family 1
[ 1.032846] pci 0000:02:00.0: Boot video device
[ 1.032851] PCI: CLS 64 bytes, default 64
[ 1.032896] Unpacking initramfs...
[ 1.077853] Freeing initrd memory: 3040K (ffff880037a00000 - ffff880037cf8000)
[ 1.078037] PCI-DMA: Disabling AGP.
[ 1.078177] PCI-DMA: aperture base @ bc000000 size 65536 KB
[ 1.078178] PCI-DMA: using GART IOMMU.
[ 1.078181] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.083617] LVT offset 1 assigned for vector 0x400
[ 1.083627] IBS: LVT offset 1 assigned
[ 1.083671] perf: AMD IBS detected (0x0000001f)
[ 1.083704] Scanning for low memory corruption every 60 seconds
[ 1.083998] audit: initializing netlink socket (disabled)
[ 1.084010] type=2000 audit(1393430868.973:1): initialized
[ 1.093232] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.094458] zbud: loaded
[ 1.094658] VFS: Disk quotas dquot_6.5.2
[ 1.094694] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.094868] msgmni has been set to 11941
[ 1.094909] Key type big_key registered
[ 1.095404] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.095492] io scheduler noop registered
[ 1.095497] io scheduler deadline registered
[ 1.095545] io scheduler cfq registered (default)
[ 1.095764] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.095889] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.096005] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.096018] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.096062] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.096064] vesafb: scrolling: redraw
[ 1.096066] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.096118] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010e80000, using 1216k, total 1216k
[ 1.1

"How silly of me to be using device nodes!" I thought to myself. I should be using the ALSA hardware names, and it seemed like such a simple solution!
So I tried basically every combination of ALSA:HW:1,0 I could think of, with and without the ALSA, the HW, or both. Nothing seems to work.
Audacity, and many other programs can record audio from HW:1,0 (as long as tvtime is running)
VLC tries to open a file named "HW:1,0" in my home directory, in spite of suggesting it as an audio input in the drop-down menu .
The frontend for MythTV is now repeating this ad nauseam no matter what I change (almost like it isn't actually changing anything):
2014-02-26 13:57:21.026126 E AudioOutput Error: AOOSS: Error opening audio device ():
eno: No such file or directory (2)
While the backend is obsessed with this:
2014-02-26 14:09:34.250884 E NVR(/dev/video0): Unknown audio codec
2014-02-26 14:09:34.250906 E AudioIn: unknown or unsupported audio input device 'hw:1,0'
2014-02-26 14:09:34.250911 E NVR(/dev/video0): Failed to create audio device: hw:1,0
2014-02-26 14:09:34.250914 E NVR(/dev/video0): Failed to init audio input device
2014-02-26 14:09:34.312487 E NVR(/dev/video0): VIDIOC_S_CTRL:V4L2_CID_AUDIO_MUTE:
eno: Invalid argument (22)
2014-02-26 14:09:34.313888 E NVR(/dev/video0): Invalid audio device (hw:1,0), exiting
I am stumped here. Thank you in advance for any wisdom you may contribute to this conundrum ^_^!

Similar Messages

  • Applet works but not through program?

    I am creating an applet. When I compile my program in textmate, I get this error and the code does not run.
    Exception in thread "main" java.lang.NoSuchMethodError: main
    Program exited with status 1.But when I open the html page I created, it runs perfectly! Any ideas as to why this occurs?
    There is an image that goes with this. You can substitute any tiny gif image you like, just change it's name to camel.gif*
         Chapter 6:     Move It
         Filename:     MoveIt.java
    import java.awt.*;
    import java.applet.*;
    import java.awt.event.*;
    public class MoveIt extends Applet implements ActionListener
         private Image camel;
         private Panel keyPad;
         private int top = 15;
         private int left = 15;
         private Button keysArray[];
         public void init()
               camel = getImage(getDocumentBase(), "camel.gif");
              Canvas myCanvas = new Canvas();
              keyPad = new Panel();
              Button up = new Button("Up");
              Button left = new Button("Left");
              Button right = new Button("Right");
              Button center = new Button("Center");
              Button down = new Button("Down");
                   setLayout(new BorderLayout());
                   keyPad.setLayout(new BorderLayout());
                   keyPad.add(up, BorderLayout.NORTH);
                   keyPad.add(left, BorderLayout.WEST);
                   keyPad.add(center, BorderLayout.CENTER);
                   keyPad.add(right, BorderLayout.EAST);
                   keyPad.add(down, BorderLayout.SOUTH);
                   add(myCanvas, BorderLayout.NORTH);
                   add(keyPad, BorderLayout.SOUTH);
                   up.addActionListener(this);
                   left.addActionListener(this);
                   center.addActionListener(this);
                   right.addActionListener(this);
                   down.addActionListener(this);
         } //end init
                   public void paint( Graphics g)
                        g.drawImage( camel, left, top, this);
                   public void actionPerformed(ActionEvent e)
                        String arg = e.getActionCommand();
                          if(arg == "Up")
                             top = top - 15;
                             if(arg == "Down")
                                  top = top + 15;
                                  if(arg == "Left")
                                       left = left - 15;
                                       if(arg == "Right")
                                            left = left + 15;
                                            if(arg == "Center")
                                                 top = 60;
                                                 left = 125;
                                                 repaint();
                   } //end actionperformed
    }And the html page is:
    <HTML>
    <APPLET CODE = "MoveIt.class" WIDTH = "325" HEIGHT = "250">
    </APPLET>
    </HTML>

    Oh. I thought that was standard across all editors. At school we use TextPad and it allows you to select the html host document and run the application from the program. I am using TextMate since I am on a mac and figured it would be the same. Thank you.
    One question tho, why does the window not open up to the pixel size I specified in the html host document? Does it do so on your machine? What OS and browser are you running?
    It won't take that size in neither Firefox or Safari on my mac.

  • Can't connect to websites with any browser. Bookmarks do not work but bookmarks  through bookmarks edit works just fine.

    Can't connect to websites with any browser. Bookmarks do not work but bookmarks  through bookmarks edit works just fine.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • HP Pavilion 15-p027ne, Audio working through headphones/earphones but not through speakers

    HP Pavilion 15-p027ne:
    Audio working through headphones/earphones but not through speakers.
    I downgraded from windows 8.1 to Windows 7 (64-bit) and the problem is still not resolved. 
    Appreciate any troubleshooting tips.
    Thanks.
    - HP Pavilion User.

    Hi there @donimuha 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are getting sound from the headphones/earplugs but not from the system speakers. I am happy to assist you with this.
    As the sound is working through the audio jack, I will assume for now that the audio driver is fine. Please check through the following page, which is very comprehensive. If you are still having a problem it is possibly a hardware issue with the speakers.
    No Sound from the Speakers (Windows 7)
    Let me know if that works for you.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • I open my work Lotus Notes through FireFox. since the upgrade if my email has attached I can't find them. The attachment windows is there but nothing is in it.

    Question
    I open my work Lotus Notes through FireFox. since the upgrade if my email has attached I can't find them. The attachment windows is there but nothing is in it.

    you haven't lost anything, it's virtually impossible to delete your Zotero library by accident.
    You may just need to show your add-on bar (View --> Toolbars ---> Add on Bar).
    To check if Zotero is disabled, go to Tools--> Add-ons --> Extensions.
    Make sure to check for Zotero updates, you may need the newest version (2.1.10) for FF6 compatibility.
    As a general piece of advice, if technical problems make you frantic, don't perform major software upgrades in the middle of a project. Also, support for Zotero is better on the Zotero forums than here.

  • Connecting computer to tv for viewing EPIX,ETC.. but not through router?????

    I need to start connecting computer to tv for viewing EPIX,ETC.. but not through router?????  I have a workroom with a TV but without cable connection, so I thought I would connect my computer to my TV.  I have an Acer Aspire laptop. and a 27" tv.  Please can anyone tell me how to get this to work.  I need something to watch while I am working.

    I'm a little confused here as to what you're looking for. Are you simply trying to get Internet Connectivity to the computer using the best method possible or are you looking to try and send a signal to the TV without a cable connection going to it? The computer's Internet portion is easy if that is the case. If we can just get some additional information on that, we'll figure out how to approach it.
    1: Does this Workroom have any Coaxial cabling going to it that can be connected back to the cabling the FiOS equipment is using?
    2: Is Ethernet cabling available and running to the location of the router, or nearby?
    3: Would Wireless work for you (as much as it is not ideal)?
    4: Are you looking for a Physical connection to the network?
    Now if what you're trying to accomplish is the actual connection between the Computer and the TV, check to see what inputs the TV supports (HDMI, VGA, DVI, Component, Composite) and see what the laptop supports (DisplayPort, VGA, HDMI, DVI). More than likely the Laptop would have a VGA connection along with the TV. Your best bet would be to honestly just connect a VGA Cable between the two machines, and then for audio, just use a 3.5" to Composite connection for the TV (Unless the TV has a 3.5" Input jack for the PC Input). If HDMI is available on both devices, by all means use that. Same with DVI as both give better picture quality over a VGA Cable.
    If you can give us exact model numbers, that would help.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • How to publish iWeb online but not through iCloud but someone else?

    How to publish iWeb online but not through iCloud but someone else?
    Mybe Google or woodpress, 
    Or publish iWeb online with iCloud WITHOUT upgrading Lion?

    iWeb will still be around but as Jeff pointed out if you want a blog with visitors comments you should consider converting your iWeb blog to  WordPress.  Rage Software has created an applicaiton that will convert your current iWeb blog w/visitor comments to a Wordpress blog. You can get the application here: Convert Your iWeb Blog to a WordPress Blog.
    If you don't have visitor comments then the iWeb blog will continue to work for you on a 3rd party FTP server.
    If you have photo pages in your website with the accompanying slideshow you'll need to read the following:
    It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
    HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.
    OT

  • Sound through speakers but not through headphones

    hello i have an hp envy 15-k002ne laptop wtih beats audio. i recently reinstalled windows 8.1 on the machine and was able to get all my drivers from the hp support website and unortunately the realtek high definition audio driver for sound on my machine made it in such a way that sound only comes from my speakers but not through my headphones. i tried using different headsets but it recognises some of them as microphones only because of that feature. someone please help me for i have been restless for days. thanks in advance

    Hi @aflokko ,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you recently reinstalled Windows 8.1 and were able to get all the drivers from the HP support website.
    You have audio through your speakers but not your headsets.
    Have you ran The HP Support Assistant  to aid with HP updates and resolving issues?
    Have you tried Using Automated Troubleshooting (Windows 8) to aid with this difficulty?
    Here is a link to Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices that should help.
    If you are still having an issue, I suggest contacting HP support for further assistance.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

    Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

    Review my post here:
    http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
    And see if something similar will work for you.

  • My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

    My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

    I have ALL the exact same symptoms as on my home computer.
    It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

  • Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

    all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
    So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Speakerphone problem - lost voice from speakerphone while playing music or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes

    or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes.
    iphone 4
    SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone is new - no water - no havy dust - usual using  
    hope will never return. Thanks

    We checked it with an iPhone 5 in house multiple times and could not reproduce this Problem. Must be something specific to your device. Maybe your speakerphone volume is turned down completely?
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Hi!My 6 month old MBP 13" has suddenly stop charging.Mac is working,but not charging

    Hi!My 6 month old MBP 13" has suddenly stop charging.Mac is working,but not charging

    Troubleshooting MagSafe adapters  http://support.apple.com/kb/ts1713
    If you need to pursue further you can do it on-line,  start here
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • My iPad cannot connect to my internet.  the internet is working but not with my ipad.

    my iPad cannot connect to my internet.  the internet is working but not with my ipad.

    Call your ISP (Internet Service Provider) and explain them your issue, it could range from having your router configured incorrectly to having a wiring issue. Personally, I have Comcast and they are great, no issues, and awesome customer service.
    Hope you get up and running ASAP

  • HT4993 My volume down button is not working.  The UP button works, but not the down button.  I have tried to restart it and that didn't solve the problem.

    My volume down button doesn't work on my iPhone.  The UP buttown works, but not the down button.  I have tried a hard reset and that didn't fix it.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for

  • Testing thru NWDS: Error replaying a recorded Web dynpro java application

    Hello Experts, I am trying to test a web dynpro for java application using the record and replay facility provided in NWDS. I have gone through the documentation provided under the head "Testing Web Dynpro Applications in the Developer Studio" at hel

  • Migration Assistant / Interrupted Transfer

    Hello, I have been working on a friend's PowerMac G4 QuickSilver 933 MHz. Her 60 Gig IBM DeskStar ("DeathStar") HD was failing. We installed a new drive and fresh copy of MacOS 10.3.5 from retail CDs and updated to 10.3.9. We had the old drive in an

  • Timesten auto Recovery

    an error happened on my timesten, it dosen‘t work ,After about 30 minutes,it Recovered . why dose this error happened, i Didn’t do anything. who can help me ??? 20:28:52.04 Err : : 4839: 6757/6000000000743ff0: Assertion failed: (((np)->flags) & ((sbT

  • I am getting vertical color lines in my monitor

    Vertical lines, blue, green, red are appearinfg on my monitor.

  • Spry Submit and clear form

    Hi all, I have a Spry.Utils.submitForm in my JS it will submit the form and then in my callback I have it clear the form element using document.formelement.reset(); The problem is, it seems that my form is getting reset before the form is submitted.