Have 4S and when syncing with iTunes using WiFi I get waiting for change to be applied.  But this seems to never end.  I have waited for an hour and still getting message.

Have been attempting to sync my iPhone 4S with iTunes using WiFi.  It appears to complete the 5 or 6 syncs, but then waiting for change to be applied comes up and it never completes the sync.  Waiting for changes to be applied continues for every.

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

Similar Messages

  • When syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen.  have done the reset and restart, but still get same thing.

    when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen.  have done the reset and restart, but still get same thing.  Ipad does not show up in itunes even though cable plugged in.  Have shut down and restarted Windows 7 computer.

    I had done all of that to no avail.  I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again.  I had tried switching the USB port at the front of the machine but that had not helped.  Everything is good to go again.  thanks for  your reply

  • Can't sync device with itunes using WiFi

    I want to sync my iPad with iTunes using WiFi, I found some instructions here, and I achieved all of it, and when trying to sync using the device I go to Settings > General > iTunes Wi-Fi Sync > Sync , but when removing the device usb from the pc and connecting it to an outlet power source the sync button in the device is disabled and the device displays a message like "waiting for PC_Name to be available" although the iTunes is opened in the PC and both the PC and the iPad are connected to the same WiFi, I tried to solve the problems using the instructions here but it didn't solve my problem.

    finally found the solution, after a lot of searching I found the solution here at linders09 answer:
    "I had the same problem but I was finally able to fix it. TIf you still haven't fixed this you can ry this. Go to control panel > rogrms and features > find the apple mobility device support > right click and hit repair. After I did this I had no issues syncing over wifi. Hope this helps!"

  • Ipod touch will not sync with itunes using windows 7 makes everything freeze

    My itouch has not been able to sync with itunes using windows 7 for a couple of days.  Everything just freezes and I have to reboot my laptop. I have reinstalled itunes and deleted the backup of the ipod but nothing is working.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • IPhone loses play counts when syncing with iTunes

    I would like to repeat the question from this thread, which has mistakenly been marked "answered".
    When syncing with iTunes, not all play counts are transferred into iTunes. When I turn the iPhone off, it even forgets the complete list of played songs (it is even deleted from iTunes itself).

    I have similar problem. Played podcasts becomes UNPLAYED after synch with iTune.

  • New i phone refusues to sync with itunes using pc, new i phone refusues to sync with itunes using pc, new i phone refusues to sync with itunes using pc

                         New i phone refuses to sync with itunes using pc

    I solved my problem with new i phone not wanting to sync with i tunes on p.c. I was using a generic brand usb cable,and not the original one i recieved from apple.I swapped-out the no brand name usb for the original apple brand usb cable,and my I phone synced flawlessly,i'm so happy.the onle change i had to make to my info was my i phone needed to be checked as new,and not the original in the i tunes phone info./recognition starting stage of i tunes sync.it was all a result of generic usb,non apple brand usb cable,how simple,go figure....

  • HT1386 How do we keep one phone contacts seperate from the other when syncing with itunes

    How do you keep one phones contacts, calendar, etc from another phone when syncing with itunes?

    Disable auto-syncing. Here’s how:
    1. Before you plug the iPhone or iPod into the computer, go to iTunes.
    2. On a Mac, go to the iTunes menu -> Preferences -> Devices.
    On a PC, go to Edit -> Settings -> Devices
    3. In the pop up window, look for the icon or tab that says Devices. Choose it.
    4. Just below the box, you’ll see a checkbox reading "Prevent iPods, iPhones, and iPads from syncing automatically."
    5. Check it and click OK at the bottom of the window.
    Now when you plug the phone in it won't automatically star syncing.

  • Is ipod shuffle compatible with spotify when synced with itunes?

    is ipod shuffle compatible with spotify when synced with itunes?

    You must sync the iPod with one or the other, but not both.
    http://www.spotify.com/us/help/faq/ipod-integration/
    B-rock

  • I have apple tv when i try it used wifi in my computer it didnt work?

    i have apple tv when i try it used wifi in my computer it didnt work?
    plz help me?

    The above makes no sense.
    Post in your native language.

  • HT1386 When an iPhone is plugged into the wall outlet and is synced with iTunes, does the phone need to be ejected on iTunes like it would be if connected to the computer, or is it just fine to disconnect from the wall?

    I am wondering if I need to eject my iPhone from iTunes or if it is fine to unplug the phone without ejecting.

    If it's connected to your computer and synced with iTunes you should eject it.  If it's only plugged into a wall outlet and not your computer, just unplug it (since there's nothing to eject it from).

  • Had iphone, it broke, have new iphone, cant sync with itunes

    I had an iphone 3g for about a month and it died. I got my new one today and when I plugged it into my computer to sync with itunes nothing happened. I then opened itunes but itunes is not "seeing" my new phone and I can't do anything with it. Anyone know how to help me reset and find my new phone in itunes? Thanks so much!

    FOUND IT! This was so simple I'm shocked everyone on here didn't know about it. Here is the solution to my problem-maybe it can help others who can't sync!
    FOUND THE ANSWER!!
    Apparently when you plug your iPhone in to your computer, Windows will "sometimes" install the drivers as a camera, putting them in the wrong place. This is why it will pop up in Windows so you can take photos off, but iTunes can't see it. SO, what you have to do is move the driver file (USBAAPL.SYS) to the correct location. Follow the directions I found below & your iTunes should be fixed (worked for me):
    What works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:
    1. First off you need to have iTunes installed and the ipod touch plugged in
    and recognized as ‘something’ e.g. digital camera (it shouldn’t really
    matter what it’s recognized as, but it needs to be found by windows).
    2. Search for usbaapl in the C:\WINDOWS system folder:
    o open windows explorer (e.g. Right-click Start and then click ‘explore’)
    o right-click the WINDOWS folder and select ‘Search’).
    o type in usbaapl and hit Search – try to ignore the dog!
    You should find the driver info in a sub folder of
    C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7 507DD7B22331826547BDD2D206B
    Remember that location (either leave the search box open or copy the folder
    name into note pad – you’ll need it later)
    If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not
    been installed with the iTunes install and you’ll have to reinstall iTunes.
    3. Locate the ipod-camera device:
    o Open the device manager, e.g. using Start > Control Panel >
    Performance and Maintenance > System > Hardware Tab > Device Manager
    o Look for a device called ‘ipod’ - if your ipod shows up as
    ‘digital camera’ it will be under something like ‘imaging devices’.
    4. Update the driver:
    o Right click the ‘ipod-camera’ in device manager and click on
    ‘Update Driver’ – the Hardware Update Wizard will open.
    o Check the ‘Install from a list or specific location’ then click ‘Next’
    o Check ‘Search for the best driver in these locations’. Un-check
    ‘Search removable media’ and check ‘Include this location in the search’.
    In the text box below type (or better copy and paste) the folder
    containing the ipod driver information found in step 1 (in the example
    above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7 507DD7B22331826547BDD2D206B),
    then click Next.
    You should now see something like ‘Apple ipod device driver’ or so. Continue
    installing that device. Once the driver has been installed the ipod will come
    to life and iTunes (if you have it open) will show it.
    If for some reason this doesn't work, try downloading the file here:
    http://www.runscanner.net/files/sys...sbaapl.sys.aspx
    And putting it here:
    C:\ WINDOWS\ system32\ drivers\ usbaapl.sys

  • Apps purchased on iPad are being deleted when syncing with iTunes

    Hi,
    I am having a problem with the apps that I purchase using my iPad not syncing with iTunes. I have purchased several apps and books. When I use my iPad to make the purchase and then plug the device into my computer to allow it to sync, iTunes goes through the process of backing up the iPad and then transfering purchases over. When it gets to the step for syncing tracks it goes and removes all of the apps that it just said it was transfering the purchases over for. Nothing I do seems to work to fix this issue so that the apps aren't removed when I sync. So far the only ones that stay on my computer and device are the apps that I used my computer to buy and then are synced onto my iPad. Please let me know what to do about this as I have lost several apps.
    Thanks
    Josef

    I am not sure what the problem could be.
    You may want to try disabling auto-sync, make some purchases on your iPad, and then transfering the purchases and see if they show up in your iTunes library and the checkbox for the apps are checked for syncing to your iPad. If they are then you can try syncing and see if that deletes them from your iTunes library.
    The link for instructions on transfering your purchase is as follows:
    http://support.apple.com/kb/HT1848

  • Ipod Classic Randomly Loses Tracks/Songs when sync with Itunes

    My IPod Classic Randomly loses Songs from playlists. I can sync with iTunes and it will keep say 8 songs out of 10 in a playlist (sometimes all 10 if I’m lucky) but if you re sync it will have 7 or 9 different tracks in the playlist. Its Very annoying as my girlfriend uses it for teaching and songs are always missing.
    I have tried updating IPod, re-installing ITunes and restoring IPod
    Any Ideas??? Apart from buy a new one but from what I can guess seems like a software issue.
    Thanks

    I was having the same problem. 
    I have an i pod classic 80GB (with the wheel) I think it's 5th generation
    I would start a Sync, it would sync 2 or 3 songs then stop or hang up, which did not interfere with any other function, so I would not say it froze.
    Once I ended the sync by clicking on the X next to the sync progress bar at the top of the window, I ejected the ipod and then plugged it in again.  Then  I selected my i pod under Devices in the menu on the left-hand side of iTunes.  Clicked on the summary tag.  Clicked on  "Manually manage music and videos" Clicked ok and apply.
    When in manual mode, you cn drag songs from  iTunes to the device icon in the sidebar. Once I downloaded the song or songs or album that was causing the problem, I then unselected manual load, and everything else was able to sync normally on automatic mode.

  • Cannot get iPod to sync with iTunes using Windows 8 Laptop!

    I have been trying to get my iPod classic to sync up with iTunes using my Windows 8 Laptop all night!  I tried restoring the iPod, I tried uninstalling/reinstalling iTunes, disconnecting my iPod to restart my laptop then plugging back in.  I also ran iTunes Diagnostics and it says my iPod isn't connected yet it shows on the sidebar.  I also have automatic sync set up.  When I hit sync, it initializes then stops.  What am I doing wrong?  Is there some trick I am missing.  Also, my iPod won't charge unless it is syncing.  What's up with that?
    Any help or advice would really be appreciated! 
    Thank you in advance.

    For the charging issue, some newer computers with USB 3.0 ports (especially laptops) seem to have a "feature" that saves energy by turning off full power to the port when the connected storage device is no longer mounted by the system.  An iPod is a storage device.  When iTunes syncs the iPod, iTunes mounts the iPod's dlsk.  So it gets full power on the port, and the battery charges.  When iTunes is done syncing, iTunes automatically unmounts the iPod's disk.  The system shuts off full power to the port, and the battery no longer charges.
    To work around this problem, go to the iPod's Summary screen in iTunes.  There is a setting their for Enable disk use.  Check that box and Apply.  This setting keeps the iPod's disk mounted continuously, when the iPod is connected.  Therefore, the port should continue to receive full power, and the battery charges.  That's fine for now, but later on, you can go into the computer's Control Panel preferences to see if there is a setting that disables this "energy saver" feature, and keeps the USB ports at full power all the time, whether the storage device is mounted or not.  If that is possible, you can turn OFF Enable disk use for the iPod.
    NOTE:  WIth disk use enabled, you need to eject the iPod in iTunes before disconnecting it safely from USB.  The Eject button is next to the iPod's name in iTunes (to the right).
    Now, for your main question about setting up automatic syncing...  First, if the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar.  When connected, the iPod appears in the sidebar, under DEVICES.
    Select the iPod in the sidebar.  To the right, its Summary screen is shown.  Toward the top, there is a bar of buttons starting with Summary.  Click on Music there, next to Summary.  This Music screen is where you tell iTunes how to sync songs to the iPod.
    Check the box for Sync Music.  This setting enables automatic syncing.  If you want your entire iTunes music library on your iPod (and it fits), choose the option to sync Entire music library.  Then click Apply.  Going forward, any change you make to your iTunes music library syncs to the iPod automatically (at the next opportunity).

  • Spinning Beach Ball normal when syncing with itunes?

    Just wondering if this is something that always happens to everyone - when syncing my iphone to itunes it will always stall for a few seconds and the spinning beach ball appears even though im using a brand new Macbook Air.
    Is it normal? Will it always happen no matter what?
    Thanks

    Hi,
    Since you haven't had your MBAir for long, make sure the system software is up to date.
    Click the Apple () menu (top left in your screen) Software Update ...
    And repair permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. As long as you see, "Permissions Repair Complete" when it's finished... you're done.
    If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US

    Restart the MBAir and restart your iPhone and try syncing to iTunes. Make sure the iPhone battery is charged to 100% before syncing regardless of whether or not it's connected to your MBAir.
    Carolyn

Maybe you are looking for

  • Mail takes a long time to load

    I have about five accounts, some of them IMAP others Exchange. In the past month Mail became extremely slow to load and start. It opens the app right away but I don't see any email and all the account inboxes have the spinning gray lines next to thei

  • Lost catalyst control center and switchable grphics

    Hi i accedintly deleted all of ati folders in my pc and reinstalled the new amd for the driver and lost switchable grphics options in my pc  now i dont know what should i do to restore the switchable graphics setting in my laptop or the old catalyst

  • No BP created for new Org unit

    Hello Alexander, Have u generated business partners from BUSP before doing this step Rohit

  • Purchase order runtime error

    Hi , while creating purchase order iam getting an error of the following.can any body resolve this issue. Runtime Errors         SYNTAX_ERROR Date and Time          08.07.2008 10:26:23 Short dump has not been completely stored (too big) Short text Sy

  • 7.1.1 to 7.2.3 do you have to reauthorize plugs, etc.

    Can someone tell me if you have to reauthorize anything, other than perhaps Logic, when doing this update? I won't have time until next week to do all that. Actually I guess I'll wait to do Logic too, as I'm in the middle of a project and any updatin