Have a 32g itouch and when i connect it to imac and itunes iOS 5 isnt there and i cant upgrade any help
i cant seem to find or have ios 5 or the instructions to upgrade r coming up when i bring itunes up i have the latest itunes installed i have the latest snow leporad have gotten osx line yet does that make a diffrence
Are you sure you don't have a 2G 32 GB iPod Touch? If you do, it can only go as high as iOS 4.2.1. See this article to help you identify what generation your iPod Touch is.
http://support.apple.com/kb/ht1353
What happens when you click the Check for Updates button from under your iPod's Summary tab in iTunes?
B-rock
Similar Messages
-
Hello, I have an iphone 4 and it has recently come up with the connect to itunes logo. When I connect it to my computer, itunes comes up with there is a problem with your iphone. What should i do? I need help ASAP
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute...
i tryed diffrent commands such as diskutil eraseDisk JHFS+ Disk1
diskutil list , wont show up my harddrive , i now its functionally cause it shows up in disk utility with name and i can get info about it , but everything is greyed out can only switch between "erase , partition , recover , Raid ,....
when i click the apple in the top left corner the whole menu is greyed out... what to do ? help me please
Sincerly AppleNoob92
p.s i have no experience in apple imac's at all never used before, but im kinda windows nerd so computers i understand but this imac make my insane, cant seem to find any solutions anywhere on the WWW....Your HD may be crashed, so you probably should use the oringinal install discs to run Apple Hardware Test in extended mode. If error codes appear this confirms a hardware failure. In addition you cannnot repair the HD using Disk Utility from the startup disk, you have to use the origninal Install discs that shipped with the computer or the most up-to-date version of OS X on a disc that you have.
-
The MBP is mid-2012. The display is working fine when I connect it to my TV. I have a HDMI that can carry sound to my LG tv when it is coming from a DVD. I have changed my preferences in sound to output to be LGtv, but it still won't work when I want to have sound from the internet or from iTunes.
I attempted to change the settings in MIDI setup, but that also isn't making it work.
Thankyou for any help.I tried it. This page: http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewFeature?id=440027055&affId =1884404 opens iTunes, and allows me to watch past performances - it works fine. There doesn't seem to be any way to watch live, unless it just hasn't started yet. Unfortunately I have to go to work in a few minutes so I can't check again tonight.
-
Oh no. I lost my ITouch. How can I get my serial #. Would Apple have it on record since I bought it on line from them about two years ago. I no longer have the box
See the bottom of this reply:
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
My brother bought a iphone 4 for me from chaina, after update its not working anymore , it asking for icloud id ,when i m giving my id its not taking
The phone was previously owned. It still is locked to the Apple ID of the previous owner. This is Apple's Activation Lock antitheft feature. If you cannot contact the previous owner the phone is now an iBrick. See: http://support.apple.com/kb/HT5818
-
I have tried to get info on this app and it does not show up on the app store any longer so i cant contact the developer about this app for support. it does not work and i feel i was cheated out of my money for an app that was supposed to play pandora when the alarm goes off but it does nothing. i need help with this.
As stated All purchased are final.
Use the e-mail receipt to Report a problem or
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
when I connect my iphone to my itunes it says loads of space is being taken up by documents , however i have no documents saved on my phone to my knowledge. how do I find and delete these hidden files ?
I restored the phone so had no apps on it at all and there was still this certain amount of space used up by documents ! I've already had it in to the apple store and they didn't seem to have a clue either ! Ugh ! Wouldn't mind so much if the phone was free with a contract but I actually spent 450 quid buying this phone and it's always full of "nothing" so virtually unusable
-
I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format". Can someone please help me sort this problem, it's so frustrating!!!!!!
It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock -
I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
upgraded to itunes 11.4 and now when i connect my iphone 4s..itunes crash!!!!when the iPhone is disconnected iTunes is working properly....
please help me!!!Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
When i connect my ipod shuffle to itunes i get an error message the ipod cannot be synced, the required disk cannot be found anyone have this happen? How do i get past it?
I seem to recall that this may be cause by overloading the USB bus (lack of power to go around). Shut down your computer. Reset the iPod shuffle using this procedure.
http://support.apple.com/kb/HT1655
Disconnect ALL peripheral USB devices, including keyboard and mouse. Power up the computer. If you need your mouse, connect it and launch iTunes. Connect the iPod shuffle to a direct USB port and try the sync again. See if there is any difference. -
I have an iphone 4 and trying to upgrade ios 6, downloaded the version and when trying to install get an error that i need internet, i have internet of course... please help...
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
when i connect my iphone 3Gs to itunes in my computer they say, they have an update for my iphone ios 5 to ios 6.1, this is the message that apear in my itunes, We're sorry, we are unable to continue with your activation at this time.Ask your question. what should i do for now for iphone didnt activate of itunes?
Ask the person who owns the iPhone.
Which version of Cydia appears on the iPhone - the one
with the black and white icon or a different one?
If it was jailbroken, contact the developers of the jailbreak.
Not all jailbreaks can be completely removed.
Google may provide some direction. -
I downloaded a movie on my apple tv and now when I try to watch it tells me there is an error and to try later. I have tried several times over the last 5 days and nothing changes. Any help please?
What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet
Maybe you are looking for
-
PS report: multible selection for report selection criteria
Is there a possibility to define multible selections in the report selection variables of a PS hierarchy report? I tried to define them via CJE6 -> EDIT -> General data selction and entered valiables in the FROM column and the TO column. But when I e
-
Cannot Join a WPA2-Encrypted Network
Hello all, I have the iPad Wi-Fi+3G. At work we have 2 wireless networks served by Cisco WAP4410N access points. One is encrypted with 128-bit WEP and the other is WPA2-Personal Mixed. Both are set to 802.11b/g/n, and they have different SSID's. The
-
I can open the account, but can't select any items to open. problem first started Friday, when the e-mail account would not stay open. Now will stay open but will not open e-mails or allow selection of tabs. contacted yahoo but they said it was a fir
-
Need help in query to have all items in sap with PO data on order, date
Hello Everyone, I need some help in writing a query to show all items in sap db to have itemcode, itemname, onhand, sellable(onhand-committed), on order, and the delivery date when that time should be received. I need to know what items are regular
-
Interst calculation of Accounts receivable.
Hi, Kindly provide the configuration stepsl for the Interst calculation of Accounts receivable. Points will be assigned.