Have a 3gs that siri worked on until I went to os5  now I get sorry I dont seem to have a network conection even though I do.

have a 3gs that siri worked on until I went to os5  now I get sorry I dont seem to have a network conection even though I do

Siri works only on iPhone 4S. You must be thinking of something else. Voice Over? Voice Control?

Similar Messages

  • I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. Where can I download ios 4.3.5 from?

    I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?

    I tried just about everything and finally brought my Ipod touch to the apple store.  The tech installed ios 4.3.5 but still no WIFI.  He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
    The "solution" was bizarre.  On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
    I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting.  It worked!  I must admit the fix does not work reliably, so I may still go for the exchange.  Still, I am now convinced that it is a hardware problem.    i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon.  The chilled component would work long enough to identify what needed replacement.  Perhaps something similar is happening here.
    For anyone wanting to try this, I found it more convenient to place the back of my ipod on a  frozen cold pack until the wifi is restored.  It seems to happen when condensation forms on the face.  I used a towel to wipe off the moisture so as not to add to the problem.

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I just bought an iPhone and it seemed to be working well until I went to sync it to my computer and it synced under my old ipod. Now when I go to text it sends as my email and I can't change it to my phone number or anything. How can I fix this?

    Pretty much what the title says but if for some reason it doesn't...
    I just got an iPhone 4 today and it was working well until I went to hook it up to my computer and it asked me if I wanted to set it up as a new phone or back up all my stuff from my old ipod.
    I accidentally clicked that and it had pretty much ruined my phone, deleted all contacts everything. I then did a reset through itunes and now when I send a text message it sends as my email instead of my phone number.
    I've gone to settings->messages and turned off and on imessage and didn't fix it.
    How do I fix this?

    Yeah, you fried the phone big time.
    Go into iMessage settings and set the Caller ID to your phone number.

  • He menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that t

    he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..

    As advised, you need to call Apple about this.
    http://support.apple.com/kb/HE57
    No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
    Good luck.

  • I have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    i have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
    I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
    I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

  • I have a MacBook that had Mcafee on it and went to great lengths to get it off.  Unfortunately after running all the remove scripts and support from mcafee, in my console it still shows com.apple.launchd{1} with message (com.mcafee.virusscan.VshieldEPoint

    I have a MacBook that had Mcafee on it and went to great lengths to get it off.  Unfortunately after running all the remove scripts and support from mcafee, in my console it still shows com.apple.launchd{1} with message (com.mcafee.virusscan.VshieldEPointInterface[7881]) Exeted with exit code:1  Then the next line says will start in 10 seconds and it repeats endlessly.

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • My wireless key board doesn't seem to communication with my computer even though bluetooth shows it is connected.  I have changed the batteries on the keyboard and when turn on the key board the green lights comes on shortly and disappears.How to fix ?

    my wireless key board doesn't seem to communication with my computer even though bluetooth shows it is connected.  I have changed the batteries on the keyboard and when turn on the key board the green lights comes on shortly and disappears.  Can any one  help?

    Hey Annar99,
    I found a few articles that might help with the issue you're encountering. These first two are if the Bluetooth keyboard you're using is the one that came with your iMac. The first is a general "how to" for setting up your Apple Wireless keyboard, while the second one is for troubleshooting if the advice in the first article isn't working:
    Bluetooth: How to set up your Apple Wireless Keyboard
    http://support.apple.com/kb/ht1809
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/TS3048
    If, on the other hand, you're using a third party keyboard, then I would take a look at the following article's troubleshooting section:
    Bluetooth Quick Assist
    http://support.apple.com/kb/HT1153#Tips
    Hope that helps,
    David

  • I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    Welcome to the Apple Support Communities
    One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
    First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
    We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

  • Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..

    Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..
    [email protected]

    Both parties must be connected to wifi to use FaceTime (and you must have FaceTime turned on in Settings>Facetime).  If you're phone shows 3G at the top when it's on, you're not connect to wifi; you'll have to solve that problem first.

  • I have a Mac and even though Flash (11.something) says it's installed, I still get messages (FB, youtube, pandora) saying I need the latest version (10 something). I have it!

    I have a Mac and even though Flash (11.something) says it's installed, I still get messages (FB, youtube, pandora) saying I need the latest version (10 something). I have it!

    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 4.
    1. If you're getting a "blocked plug-in" error, then from the menu bar select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Check Now. Quit and relaunch your browser.
    2. Triple-click the line below to select it:
    /Library/Internet Plug-Ins
    Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
    Flash Player (failing).plugin  
    You may be prompted for your login password.
    3. Re-download and reinstall Flash. Download it from this page:
    Adobe - Install Adobe Flash Player
    Never download a Flash update from anywhere else.
    4. If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked Enable plug-ins.
    5. Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.
    6. In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.

  • ITunes music files cannot be edited, and new music files imported.  The messages says I do not have enough access privileges even though I am the administrator of the system.

    Since installing the latest version of iTunes all my music files cannot be edited, and I cannot import new music files into iTunes.  The messages says I do not have enough access privileges even though I am the administrator of the system.  If anyone can help me sort this out I would be really grateful.  I have checked the read and write privileges for all the iTunes folders and it all seems in order so I can't understand it.
    In general, I am getting really frustrated with Apple.  They seem to be getting ever more controlling in their approach to their consumers.  I need to edit music file information as I am a dj.  And why can't I import music, unless I buy it from iTunes?  Most of all, why can't I use the devices I paid a lot of money for in the way I want to use them, and not be forced to coerced to use apple's fee paying services (iCloud, iTunes).
    I have used apple computers since the early 1990's, but in the last year I have gotten rid of my iPhone and my iPad and replaced them with Android devices.  Much better and much less control.  Perhaps it is time to switch from Apple altogether.

    Hi
    Read this About Disk Utility's Repair Disk Permissions feature
    and OS X Mavericks: If you don’t have the correct permissions to open a file or folder
    Does this help?
    Jim

  • My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

    My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

    I don't get what you are saying.
    Is this all the same document?
    What version of Pages?
    Have you tried to revert to a previous version?
    Peter

  • If I switch my installed PS6, Illustrator and InDesign over to the Cloud, will I have to pay monthly even though I already purchased the programs? And will I then be able to use the program on another computer when I sign into my adobe account?

    If I switch my installed PS6, Illustrator and InDesign over to the Cloud (from an installed program with the code, like Adobe used to do it), will I have to pay monthly even though I already purchased the programs? And will I then be able to use the program on another computer when I sign into my adobe account? I know how to switch it over, I just want to make sure I won't also have to pay monthly even though it's already been purchased.

    Your purchase of licensed version of Adobe applications does apply to CC subscriptions.  If you subscribe you will pay for the subscription on whatever periodic basis you choose (monthly versus annually).

  • My email account got hacked so I changed the password and now when I try to get mail it just says operation can not be completed even though I have typed in my new password what do I do?

    My email account got hacked so I changed the password and now when I try to get mail it just says operation can not be completed even though I have typed in my new password what do I do?

    Can you acces the the account on another device?
    Try contacting your email provider.

Maybe you are looking for

  • How to display error message in abap

    How to dispaly error message in report? i have to check the range bewteen two days and if it is not in range have to display error message only once. next time if i press the execute button report will get executed without showing the warning message

  • Error in import/export of functions - for the apex team

    After exporting functions, the import gives an error. Reason : the export generates a script with function \ function importing this script gives an error because only the first function is imported. or the functions seems to be togheter one function

  • Powerbook G3 doesn't turn on.

    I have a PowerBook G3 266 mhz PowerPc G3, 256 mb memory. It has been having problems since I upgraded to 10.4.11 using XPostFacto. It would get stuck on grey screen. I then downgraded to 10.2 and it would go to sleep and make loud fans until I finall

  • Adding transitions w/out handles- just using media

    I know how to use handles and everything like that. I was just wondering, is there a way where Premiere Pro CS 6 does not use handles for transitions? In other words, I have a clip and I'm using every frame of it and I put another clip next to it and

  • SO query

    Dear Experts, In the sales order query, the sequence of the items of the sales order line is difference with SO window. If there is a sales BOM item in the sales order line, its child items will automatically located in the next rows after the sales