Have a blue screen in safari?

I have a Macbook pro and am getting a blue screen in certain white backrounds in safari and other programs. Backround on desktop seems fine!

You are welcome.
Despite Apple's incredible wealth, they don't/can't control the Internet. Sadly, this is an ongoing and ever increasing problem. The best defence is knowledge on the part of the user. Any message that pops up while surfing the Internet should ALWAYS be treated with skepticism.

Similar Messages

Mid 2010 MacBook Pro: Will randomly blue-screen and Safari repeatedly crashes.

I bought my MacBook Pro in June/July of last year, and it has worked perfectly fine up to this point. However, for the past 2 months or so, my computer will randomly go to a blue screen and log me out. Also, Safari will crash several times (it had never crashed on me until the blue-screen problem started. Both of these issues surfaced at the same time). For the most part, the blue-screening problem only happens when I'm using the internet, but sometimes it will happen when I am offline as well. This is an infrequent/inconsistent problem, though. It will blue-screen and Safari will crash one week, but then it will be perfectly fine for the next three or four weeks. What's wrong/how do I fix it?

Hi JRC8.8,
It sounds like you have been on the right track in trying to troubleshoot this issue. You may want to see if your MacBook Pro will boot directly to the Apple Hardware Test, as outlined in the following article:
Apple Support: Using Apple Hardware Test
http://support.apple.com/kb/ht1509
Regards,
- Brenden

HT1414 I have a blue screen. What is up with that. I can't see anything. I have charged it and everything. I have taken very good care of my IPAD.

I have backed up my IPad and still have a blue screen. Very upset this IPad is not a year old yet. I have taken very good care of it!! This is a lot of Money to not get to enjoy!
Upset,
Annie Murray

Hi,
Instead of using Adobe Reader try to convert your files through Export PDF.
Kindly refer to this link :https://cloud.acrobat.com/exportpdf
Please let us know if you require further assistance.
Regards,
Florence

Have a Blue Screen issue, read this from Apple...

Just posting a link for people who may have the blue screen issue, I snagged this from another thread in hopes of bringing it out front more: http://docs.info.apple.com/article.html?artnum=306857

Hello rita240,
The steps below can help resolve issues with your iPhone's display.
This can include bright or dark pixels, lines in video, or sections of video missing.
Try turning iPhone off and then on again.
Verify the issue is not content related, by viewing different content.
If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaperand slide the slider.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

I have a blue screen on my iphone 5s and turn off !! what can i do !????

I have a blue screen on my iPhone 5s and it turn off ,, what can I do to turn it on ???

Hi there mayan hassan,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
-Griff W.

I have dead blue screen after downloading the ios 7.1.1

I have dead blue screen after downloading the ios 7.1.1.
What should I do to fix it?

Hello hagarar,
If your iPhone started displaying a blue screen after running a software update, I suggest the steps in the following article.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out,
-Joe

I have a blue screen in start up

I am having trouble sterting up my MacBook Pro that is running OS X 10.5.8. I have a blue screen that will not allow a typical start up. I started up in safe boot
but will only allow me to log into one of 3 users. Wondering if I need to clear up memory for start up. seem to have planty of overall disk space.
Help,

Try an SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379

I have a blue screen on my ipod 4g and it will not do anything? What do i do?

I have a blue screen on my ipod 4g and it will not do anything? What do i do?

Try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
If that doesn't work, just let the battery drain. Once you charge it back up it should work as normal.

If you have a Blue Screen / Error due to Wireless issues (B110a), fix in here.

For the original thread created by somebody else, please see here:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-and/B110a-network-connection-problem/m-p/319...
Here's a youtube video of what happened to me: http://www.youtube.com/watch?v=adE1kq36ld4
I'm reposting it here so it can hopefully help some of you guys if anybody else stumbles across this. In short, my printer was fresh out of the box and I attempted to connect it to the wireless network. It would throw a blue screen on the LCD with an error of B8126AD6.
I narrowed it down to an issue with DHCP. For some reason the printer connects to the wireless access point but as soon as it tries to get an IP address from the DHCP server it crashes with that blue screen and the error code in the first post above. This look like a massive bug in the printers firmware! For reference my router is a Billion 7401VGPR3 which is acting as my default gateway and DHCP server. I have a Linksys WRT54G as my Access Point for the house.
To solve it, I turned DHCP off on my router and then tried connecting the printer to the wireless network. This time it connects fine but you still can't talk to it because it doesn't have a proper IP address. If it still doesn't connect properly, try turning WPA/WPA2/WEP off on your Access Point. Leave it completely open for a moment until you can reach the web interface (as below).
To fix the IP issue, I then went into the Settings menu on the printer and printed the "HP Network Configuration Page". Note that under the Wireless menu option there are a couple of different "Print Network Test Page" options. I believe it's the 2nd one that I selected. You'll know you have the right one when it prints out the page with the following info:
IPv4 IP Address
Subnet Mask
Hostname
Default Gateway
Primary DNS
etc, etc.
Take note of the IP Address from the printout above and the Subnet Mask. My IP was 169.254.73.5 and subnet mask 255.255.0.0. Now I manually configured my computers IP address to be similar (within the same subnet): 169.254.73.10 with the same subnet mask.
Now you can load up the web interface of the printer using http://169.254.73.5 in my case. (You should also be able to ping the printer at this point too). In here you have a Network tab where you can now manually set the IP Address of the printer. Set the address you want it to be in your network (in my case 192.168.0.3 with a subnet mask of 255.255.255.0 and default gateway 192.168.0.1 and dns server 192.168.0.1).
Once I clicked OK I changed my PC's IP back to normal, and I can now reach the printer on its IP address set above. YAY!
The great thing is, in the web interface you get a million more options to play with. You can manually set the IP address, gateway, DNS, wireless settings such as WPA1/WPA2 AES/TKIP Encryption, WPA Passkey, etc. So if you had to set the Access Point to completely Open, setup the encryption again and put the passkey in here. When I did this I had to go back into the Settings menu on the printer LCD and select "Disable Wireless" then "Enable Wireless" to force it to re-join the network.
Finally I went into the Settings menu again and Updated the software on the printer. I don't know if the new software fixes the bug or not - I haven't tested it (can't be bothered!).
Hopefully this will help some of you guys out there too!
EDIT: I've just stumbled across another couple of posts with similar results to mine:
- http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/How-to-install-Photosmart-B109n-z-on-a-...
- http://forums.techguy.org/networking/627989-hp-6980-printer-wireless-problem.html

Many thanks to gardz for an exhaustive overview on this critical problem with the B110a printer!
I am happy to report that I have managed to set the printer to a static IP and am now able to connect to it wirelessly from my home computers, and also able to use the web apps and ePrint features on the printer. The printer shows the IP address and I am able to use the EWS (Embedded Web Server) to connect to its IP address from my PC's internet browser. The Wireless Network Test Report also showed no problems. I have also completed the Product Update on the printer, and there are no more pending updates now.
However, the core wireless problem is still not satisfactorily resolved.
I get the BSOD and blinking-lights error ("Please turn off printer and then on"), only if I start the printer when Wireless is enabled on the printer. If wireless is disabled prior to printer boot, there is no error.
The workaround I have adopted for now, is to always switch off the printer's wireless, before switching off the printer, and enabling the wireless setting only when I need to print/scan.
Is this happening with anyone else? Why would the printer crash if it boots with wireless enabled? If it is already set to a static IP, why would it still conflict with the DHCP on the router?
My router is perfectly working, it is in the same room as the printer, so the signal strength is good. The printer itself is quite stable except for this crash-after-boot-if-wireless-was-enabled issue on the printer.
I made the mistake of connecting the USB cable to my primary computer before installing the printer drivers, so even the USB option is not working (Windows recognizes the printer as an unknown USB device). If anyone can point me to the printer drivers (inf files), I would be grateful. The CD does not have the driver files in a convenient location. It seems to be embedded within the setup package somewhere.
Gardz and PrintDoc, I hope you can help us out on this one. I know many B110a users are struggling with the wireless issues, so HP needs to release a firmware fix and driver update soon. Wireless ought to work out-of-the-box, as this product is aimed at the SOHO users.

Updated to 10.6.4 and have blank blue screen - what should I do?

I updated to 10.6.4 and now have a blank blue screen - what should I do?

Did you do the combo update?
http://support.apple.com/kb/DL1048

I have a blue screen and no disks as computer is second hand

hi there.
I bought a second hand mac book pro from ebay last year as I had never had an apple computer before and wanted to see how I would go. I have been downloading movies and the computer was working fine. Last night the computer seemed to over heat and switch off. I am now trying to use the computer again and all I get is a blue screen and nothing else. it goes through the grey screen and then blue and then nothing. I don't have any start up disks is there anything I can do or do I have to take to the apple store to get fixed.

I have read your last two responses and I have no idea why COMMAND D would have any influence on starting the MBP. I also note that you have:
"Just tried:
Single user, safe mode, startup maneger, PRAM, and SMC."
I have the sense that you have windows installed on your MBP. This may or may not have some bearing on your situation. I do not have Windows, therefore I cannot say with any certainty.
If you have done everything that you mention above in the proper sequence I can only suggest reinstalling your OS. Will your MBP start up holding down the option key? If not, try OPTION/COMMAND R on startup.
You need an Internet connection to do this.
Is all of your data backed up? If not insert another HDD in the MBP.
You seem to have tried everything I can think of which has led me to this suggestion. Perhaps others can add additional options in lieu of taking this step. I am just out of ammunition.
Ciao.

I have a Blue Screen

Hello,
I have copied the logged error message, here it is:
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7600.2.0.0.768.3
Locale ID:   1033
Additional information about the problem:
BCCode:   d1
BCP1:   0000000000000010
BCP2:   0000000000000002
BCP3:   0000000000000000
BCP4:   FFFFF88001ACD5D6
OS Version:   6_1_7600
Service Pack:   0_0
Product:   768_1
Files that help describe the problem:
C:\Windows\Minidump\103014-62275-01.dmp
C:\Users\LARA\AppData\Local\Temp\WER-87235-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
How do I fix this without losing any files? thank you.

We do need the actual log files (called a DMP files) as they contain the only record of the sequence of events leading up to the crash, what drivers
were loaded, and what was responsible.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
If you are using Blue screen view, who crashed, or a similar application, don't. They are wrong at least as often as they are correct
Wanikiya and Dyami--Team Zigzag

Why does my mac book pro have a blue screen when booting up for a second just before the login screen

When turning on my Mac Book pro before it get to the log in screen it has a blue screen for a couple of second the goes to the login sreen. It seams to take some time to complete the login to my computer.
can anybody give me some help with this problem.
Thank you

The cable connections have (so far) solved this problem for my situation. Even though the monitor's DVI cable was firmly connected to the mini Display port connector, when I touched it the attached monitor would go 'blue' or lose its connection entirely. After disconnecting and reconnecting this junction the monitors would still take a hit on touching the connection. I also checked the connection of the mini Display port connection to the graphics board and could not push it in any further. However, after a second go-round I unplugged this connection to the board and reconnected it. I am certain it was fully inserted the first time. But, connection contacts can oxidize over time and sometimes it may just need to be disconnected and reconnected to 're-wipe' the connections. This effectively cleans them at the point of contact. So in my case I'm thinking it was the connection age that was an issue more than a 'loose' connection. Either way, I haven't had this issue for the past two weeks.

I have a blue screen on mac pro 6.2. OSX 10.6.8. I got into the computer using safe mode. I beleive I need to restore using my install disc. How do I restore? Is there an internet address to look up how to restore?

I had a blue screen on my MacBook pro 6.2 with operating system OSX 10.6.8.
I got into the computer using safe mode but could open any applications. I think I need to restore with my install disc. How is this done? Is there a web address for instructions?

http://pondini.org/OSX/Combo.html
http://www.wikihow.com/Reinstall-Mac-OS-X-(Leopard-and-Earlier)
Mac OS X v10.6 Snow Leopard: How to Erase and Install - Apple Support

I just powered on my mac book pro and have a blue screen with a flashing folder with a question mark in the middle, how do I get out of this?

I just booted my mac book pro and it is at a blue screen with a flashing folder with a question mark in the middle of it. How do I get out of it?

Click here and follow the instructions. If the computer was running Mac OS X 10.6.8 or earlier and you reach the third set of steps, insert a Mac OS X install disk.
(126818)

Have a blue screen in safari?

Similar Messages

Maybe you are looking for