Have a Canon MX860 and the magenta will not print after several deep cleanings

Have a Canon MX860 and the magenta will not print after several deep cleanings

Hello allenaeifert.
Unfortunately, if the issue persists after deep cleanings have been performed, we would have to advise that you contact our support group at 1-800-OKCANON for additional assistance with this issue.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • HT4528 I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

    I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

    Iran uses GSM, so the iPhone 5 will work.  It is already unlocked.  Just put local Iranian SIM in phone. 

  • I have a Canon MX420. The scanner WILL NOT connect to my PC. I am ready to toss Canon products!

    I have been several months now, unable to scan anything.  It always tells me either the usb cable is not connected, or the scanner is shut off.  I followed ALL DIRECTIONS to connect this device -- I even bought a new cable, all to no avail.  I have read many posts and suggestions, and again nothing seems to help.  I have uninstalled and then reinstalled the program - again with no results.  All other components of this device seem to work great.  Also, when I first purchased the device, it worked great.  Then, several months back, it failed to recognize the scanner.  I really wondered about a new cable, etc., and finally bought a good one, but it didn't help.  I hate to trash the device just because of the scanner, as somehow it seems a simple 'correction' would get things back in order; however, no one seems to have any suggestions that actually work.
    I have made sure to follow the dirtections to a "T" regarding setup -- and must have succeeded initially, as it used to work.  I use Internet Explorer 11.0.16 .  I have totally updated drivers in all areas.
    Any and all help would be appreciated.  I am not a 'whiz' when it comes to computers, so if anyone is interested, I would appreciate a response at my email address of [email address removed in accordances with privacy guidelines], as I had a difficult time finding this website.
    Thank you sincerely,
    Wm. D. Davis

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

  • I just purchased a Canon a4000 and the videos will not upload to Picasa. Pics will but not video

    I have owned several Canon's and have never had  this issue.  I attach my camera to the computer using a USB cable and hit import and everything but the videos will upload.  Please help.  Thank you.

    Hayn,
    If you are experiencing some difficulty, I recommend using the software that came with your PowerShot A4000 IS to transfer the video over to your computer.  You can also use a card reader to a accomplish this as well.
    Picasa uses other available software and codecs on your computer to work with video.  I have provided a link below that will show you a table of supported video formats and the software required to play them back:
    http://support.google.com/picasa/bin/answer.py?hl=en&answer=19626
    If you still have problems with Picasa, I recommend that you contact Google directly for further assistance.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have Dreamweaver CS5.5 and the FTP will not work. Any Ideas?

    Hello anyone out there. I just got off the phone with Adobe and they no longer support the product.
    I keep getting this message:
    Toggling the "use Passive FTP" checkbox may help you establish a connection.
    -Select or de-delect the checkbox and click Test to try again.
    _If you are connecting to an IPv6 enabled server, please select the "Use IPv6 transfer mode" checkbox in the Advanced site definition dialog.
    If the problem persists, check your network settings, including hte local firewall settings on your computer, or consult your network administrator.
    I cannot connect to the server and I have checked everything with Godaddy and it is fine. I have checked with Apple and it is all fine and the cache is empty.
    Any ideas?
    Suzwagner

    I'm guessing your site is not properly defined.  See screenshots below from Site > Manage Sites.
    Servers: Root Directory is whatever your hosting provider (GoDaddy) told you to use.  This varies by web host.  The most commonly used ones are html_docs, public_html or www.
    Click the TEST button.  If you're connected, Save and exit this panel.  If you can't connect, click More Options:
    Nancy O.

  • Upgraded iMac to ML but not my MacBook Pro and the MBP will not print wirelessly

    Upgraded iMac to ML and can print wirelessly to HP5200C, but Mac Book Pro, which is not yet upgraded to ML will not.

    Do you have the latest HP drivers, available from Apple here, on your MBP?
    I see that the HP Deskjet 5520 series are supported...
    Clinton

  • After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

    After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

    After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

  • I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file.  Use the 'properties' command in the Windows Explorer to unlock the file'.  This has not happened before.  How do I change this?

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate.  Now I have no phone and I am becoming frustrating.

    I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate.  Now I have no phone and I am becoming frustrating.
    It downloaded all my contacts, photo's with no problem.  I called the number they gave me from my old phone and then turned it off.  I then put the sim card in and charged the phone.  I followed all the setup steps and no I cannot send any text or make any phone calls.  I get a message that they cannot authenticate my phone to dial #8899 but get the same message.

        Hello Notahappycamper1962
    Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
    I look forward to hearing from you and getting this addressed.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

    I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

    Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm  not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

  • TS1702 I have just installed iso6 and now no apps will open and the iphone will not power down

    Help required I have just installed iso6 now the iphone4 will not open any app nor will the phone power down

    I have had Lion since it was first released July 20th, and I have noticed that I can not zoom in on everything that is on the internet, some things seem to not be able to be zoomed in on.  Are you saying that no matter what website you go to (this one for eample) the zoom function does not work?

  • Have a 2 year old imac and the email will not send as it is stuck on drafts file

    have a 2 year old imac and the email will not send as it is stuck on the drafts file -- any ideas please?

    As Stated... The iPad 2 does not offer this Feature.
    iOS System Requirements  >  http://support.apple.com/kb/HT3574
    Understanding  >  http://support.apple.com/kb/HT4517

  • I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
    Final Cut Studio 2 (Including Final Cut Pro 6)
    • A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    • 1GB of RAM
    • An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    • A display with 1024-by-768 resolution or higher
    • Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
    • QuickTime 7.1.6 or later
    Additional Recommendations
    • 2GB of RAM when working with compressed HD and uncompressed SD sources
    • 4GB of RAM when working with uncompressed HD sources
    • A display with 1280 x 1024 resolution or higher
    Additional Requirements for Motion
    • A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
    • A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
    • For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
    Additional Requirements for Color
    • The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
    • ATI Mobility Radeon X1600
    • ATI Radeon X1600
    • NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
    • For 32-bit rendering: a graphics card with at least 256MB of VRAM.
    • A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
    • A three-button mouse for full functionality
    Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

  • I have a new ipad mini 3 and the sync will not complete and import iphoto pictures

    I have a new ipad mini 3 and the sync will not complete and import iphoto pictures

    What happens? Any error messages? What iTunes level? What OS X level?

Maybe you are looking for