Have a dedicated TFTP Server for CCM cluster

Hi,
One CCM3.3(3) cluster in production, in which the publisher server was the TFPT server.
Now we need expend the system and would like to deploy a dedicated TFTP Server for the cluster. Is there anyone telling me what I should concern if I have a dedicated TFTP server other than the publisher server?
Thanks,
JJ

Hi,
I have a similar issue. I have actually a pub and a sub, the pub is also the tftp server. Following the SRND, I need a dedicated tftp server because we're almost at 1250 users, growing every day. My question, which may seem very basic, is how do I build a dedicated tftp server ?

Similar Messages

Service Activation for CUCM as dedicated TFTP server

Hi all,
I have used CUCM as call controld and TFTP server but never used CUCM as a dedicated TFTP server.
Do you know what serivces should be enabled on CUCM box as a dedicated TFTP server?
Version is 8.6.2a and here is what I have:
Under "CM Services"
- only tftp service is activated
Under "CTI Services"
- none is activated
Under "Database and admin Services"
- all activated but not sure they are required
Under "Performance and Monitoring services"
- all activated
Under Secuirtiy Serves
- none is active as don't needed
Thaks,
Harry

If the server is only to be used as TFTP that is the only service you need to activate.
Chris

Dedicated SMTP server for application relay/bulk mail

We are currently running Exchange 2013 CU6. We have multiple application servers relaying bulk mail thru our 4 EX servers.
We would like to bring up a dedicated exchange server to handle the delivery of smtp application relay mail only. What would be the steps involved?

Hi ,
For your requirement you can have a dedicated exchange server or else you can use the existing exchange server for relaying emails form application servers.
But the the main thing is to configure the dedicated receive connector and that would be on newly installed exchange server or else on existing exchange server in your environment.
Reference blogs for open relay in exchange 2013 :
http://exchangeserverpro.com/exchange-2013-configure-smtp-relay-connector/
http://www.petenetlive.com/KB/Article/0000891.htm
Please feel to reply me if you have any queries.
Regards
S.Nithyanandham

Replacing a TFTP server in a cluster

Replacing a TFTP server in a cluster and with everything else being the same minus the MAC address on the NIC, are there any issues I could possibly run into here?
Thank you for the help the server is an MCS7845H2.

No issues, MAC address is irrelevant on TFTP as it only matters on the Pub, simply install CUCM on the new server assigning the same IP and hostname and then restore from backup.

Does it actualy matter what you have on your remote server for services-config.xml

Hi there, does it actualy matter what you have on your remote server for services-config.xml ?
Does the information not just get baked into the flex 3 app at compile time on my local computer?

I don't think this is right!
If you don't have any config file, you can set up a remote object. The config file handles the default settings.
If you implement something like
    <mx:RemoteObject id="myService"
        destination="amf"
        source="remoteServiceName"
        endpoint="http://myDomain/amfphp/gateway.php"
        fault="handleFault(event)">
        <mx:method name="test" result="handleResult(event)"/>
    </mx:RemoteObject>
it will work!
Dany

Configuring Cisco TFTP Server for CUCM

Hi,
I currently have a Publisher and two Subscriber (v 6.1.3), I have now gone over the magical 1250 devices where Cisco recommend a standalone TFTP server.
I understand to deploy it I need to add it to the Publisher as a Server and then once up and running enable the Cisco TFTP service, then update the Option 150 address in my DHCP scope to point towards the new TFTP server.
A couple of questions, does the TFTP server need the following installed at the same level as the Publisher/Subscribers:
Dial Plans
Device Packs
Locales
Thanks and any other comments appreciated.

Hi Ian,
- By architecture, the TFTP server would be the one pushing out the firmware load and to the phones - so you would need your device packs, containing the bundle of firmware loads, to be on your standalone TFTP server.
- locales install files which the phones get from the TFTP server, such as their dictionary - so you would need locales on the standalone TFTP server
- Dial plans are files used by the CCM binary file. If you are not planning on running CCM service on the server ever, you don't need to install dial plans on that server. However, as best practice, it is good to have dial plans, locales and device packs uploaded on this standalone TFTP server, in case the server roles were adjusted at a later point in time.
- Sriram
Please rate helpful posts !

Change the tftp server for LMS

We have a central location that has numerous vpn connection to many different clients. Instead of using the TFTP server on LMS could I point LMS to use a tftp server on the client lan? That would make transfer of IOS so much fast instead of trying to copy across a heavily used WAN connection.

Hi,
Yes it is possible. There is a upgrade option using Remote Staging. The Remote Staging and Distribution option helps you to upgrade multiple devices over a WAN.
You can perform remote staging and distribution by either of the methods:
•External FTP server
•External TFTP server
•Remote Staging Device
In this workflow, a managed device or external TFTP server or FTP server is used to stage an image temporarily. The staged image is then used to upgrade devices that are connected by LAN to the Remote Stage device or external TFTP server or FTP server. If you use this method, you do not have to copy a similar image, multiple times across the WAN.
After the image distribution job is completed using a managed device as a remote stage device, the configuration changes made to the Remote Stage device are automatically reversed and the staged image is deleted from the Remote Stage device.
After the distribution job is complete, you can use the Software Mgmt Jobs tab to:
•Undo an upgrade and roll back to the previous image
•Retry devices that failed a previous upgrade
To distribute images using Remote Staging:
LMS 3.x :
Resource Manager Essentials > Software Mgmt > Software Distribution
LMS 4.x:
Configuration > Tools > Software Image Management > Software Distribution
Select Use remote staging and click Go to configure IOS upgrade job.
-Thanks
Vinod

ISCSI LUNs presented as online on new server for new cluster.

We are building out a new 2012 R2 Hyper-V cluster. The old environment is a mix of Cluster Shared Volume drives and LUNs presented just for the a VM itself.
I had planned on presenting everything in the old environment to the new environment and then just using the cluster migration wizard to move VM's over a few at a time.
I ran into a problem when I connected my first host to our SAN today. It is in a group that has over 70 LUN's presented to it. Once I connect to the target the host just cripples. I am not having Memory or CPU issues but Disk IO issues.
I noticed that the host now sees all 70 plus LUNs and has tried to bring those disk online as well.
I don't want them online right now. I just need the quorum drive and a few of the newly created LUN's online to finish creating our Cluster so we can start migrations.
Why is the Host trying to bring these drives online? As soon as I click on Devices in the iSCSI initiator the program locks up and doesn't respond.
Is there a way to setup the target but force the OS not to bring any of those disk online? I removed the favorite target, and there are no items listed in the Volume List under Volumes and Devices. However if you go to Disk Manager it shows all
70 plus disk and most of them now show online except for my newly created LUNs which are not initialized yet.
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb.

Hi KristopherJTurner,
You can try to remove the issue occurred hosts from iSCSI target SAN first. The iSCSI initiator first logs on to the target which the target has grant access before the server
can start reading and writing to all LUNs that are assigned to that target.
More information:
Manage iSCSI Targets
http://technet.microsoft.com/en-us/library/cc726015.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TFTP server in Jabber for Windows

Hi All,
I am attempting to setup Cisco Jabber for windows in an CUCM 8.6.2 SU1 environment with Windows client 9.1.1
I am reading the documentation about setting up the environment for On premise.
The document refers to setting up your TFTP server for the Windows Jabber client.
Is it possible to use the tftp server on CUCM for this purpose or do we need to run a seperate TFTP server for the windows jabber client to get their configurations from?
Thanks very much for any help.
Regards
alalli

Yes, you can use the tftp server on CUCM.
Thanks,
Maqsood

TFTP server other then CUCM !

Hi all.
In case of CME or CUCM, where both of them are required to generate phone specific xmls for manually added phones, is it possible to define windows/linux system as tftp server to serve these files ?
If yes, how the files shall be copied from CME/CUCM to that tftp server ?

Hi John
Yes, it's possible. But as you've pointed out, keeping an external TFTP server up to date with config files and all the other stuff (ring files, moh files, firmware loads etc) is not trivial.
In later versions of CUCM the phone loads support a 'load' server. You can put the TFTP load files (which are more static that config files) on their and have the phones download firmware from there, but config from CUCM.
The bottom line is that (at least in my opinion) it's generally not a great idea. Let CUCM or CME do it; they're perfectly capable, and if you have a CUCM system that is big enough to warrant it, you can have a CUCM as a dedicated TFTP server.
Regards
Aaron
Please rate helpful posts..

Remote Desktop Licensing Server for multiple deployments

Hi all. I'm towards a project of implementing 4 deployments of RDS in branch offices and 1 in head office. Those tend to be VMs on Server 2012 R2.
I've began collecting info from technet and even found that great post:
http://blogs.technet.com/b/yungchou/archive/2010/01/04/remote-desktop-services-rds-architecture-explained.aspx
but I still can't figure out if I'm to use separate licensing server for all deployments or there is a possibility to use a single one for 5?

If all machines are in the same domain a single license server will be fine. you will just need to add the licence server to your individual deployments via server manager. We have a single license server for 2003TS, 2012RDS 2012citrix VDI and 2008 Citrix
XenApp

Maintaince view creation for a cluster table

Hi friends,
I have created a maintaince view for a cluster table bseg and i have activated it its working fine..
now my problem is i can create maintaince view for mutiple tables if other tables are linked with primary table using foriegn key relationship..
Now can any one tell me is it possible to create maintance view for cluster table with multiple tables as i need a linked table with bseg which iam not able to get... ie : when i click on the relationship tab iam not getting the linked tables for bseg...
now can i create a maintaince view with 2 linked cluster tables..
if so can any one tell me how to create it.
As sap says we can create projection view for cluster and pooled table and we cannot create database view for cluster and pooled tables , but it does not mentioned like that for maintaince view....
I assume we can do it.... as iam trying to create a maintaince view with single cluster table then it shoudl allow me to create for multiple linked cluster tables.... and is it mandatory to maintain TMG for this maintaince view....?
Regards
KUMAR

yes.. ur right inserting values into a cluster table other than standard sap tarnactions is dangerious....
But sap didnot mentioned any where that we cannot maintain data for cluster tables using maintaince view... which it said for database view..that pooled and cluster table cannot be used for database view..
Regards
Kumar

Using a single Content server for DMS and also for Archive link documents

Hi,
We have Planned for a single content server for managing the documents in DMS, parallelly as DMS Standard SAP objects are not available for all SAP transactions, i have proposed for making use of SAP Archivelink funtionality to maintain the documentations where Std SAP DMS does not provide a Solution.
so here the question is
can a single content server be used as a content repository for Both DMS and archivelink,
can any one having done this pls state if it is possible to create different or Many Content repositories for DMS, Archive link in the same server,
is this a virtual creation or can we assign each repository a specific storage space which it should not exceed.
Thanks and regards
Sathish

Hi sathish,
-- Through the ArchiveLink docuemnt Management interface, an SAP sytem can use various content servers as storage media. similarly, one contnent server can be used by multiple SAP systems.
-- A Content server always has a single database assigned to it. A database can therefore be used by only one content server.
-- A databse is split into as many repositories as necessary. The design of the repository is mapped in the SAP system.A repository contains documents.
Depending on your requirements,(if u have limited documents or with low requirements) you can use the same content server for both DMS and Archivelink.
The number of documents stored on the content server is limited only by the size of the database.
Its better to have an external content server for archiving purpose, if your database size is increasing. Since the archiving systems storage is not dependent on the database.
U can also refer to the below thread :
How to Archive SAP DMS Data?
hope this helps....
regards
kavitha

Unable to create a data server for xml file

Hi ,
I have created a data server for a xml file but when i test the connection i am getting the below error.
java.sql.SQLException: class org.xml.sax.SAXException
Prefix not found: xsi
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1100)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:371)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:794)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:754)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:137)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:133)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet$IvjEventHandler.actionPerformed(SnpsDialogTestConnet.java:87)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6263)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Can any one help me out with this issue ?
Thanks in advance,
Balajitk

HI Balaji,
Below is the sample xml file which i have saved as test.xml and placed it @ D: drive
Test.xml:
<employee>
<emp>
<eno>1</eno>
<ename>Test1</ename>
</emp>
<emp>
<eno>2</eno>
<ename>Test2</ename>
</emp>
<emp>
<eno>2</eno>
<ename>Test2</ename>
</emp>
</employee>
Goto Topology >Expand Technologues>right click on XML and select new data source
in Defination Tab, provide the physical architecture name
in JDBC Tab, provide the below details
JDBC Driver: com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
JDBC URL: jdbc:snps:xml?f=d:\test.xml&d=test.dtd&re=employee&s=TEST&ro=false
Save it
Click on Test Connection and again click on test, it should show test connection as "Successfully Test"
Hope this may helps you
Regards,
Phanikanth

How can we position 5 Database Server for a centralized Database ?

1) We are providing a e governance solution for an organization,where we are providing a centralized database,Client have provided 5 Database server for the same.how can we position the Database Server? there are 5000 Concurrent users and 25000 users,SAN
Storage for approx. 60 TB,Database size of 2 TB and growth of 1 TB every year
2) How many instance can we have for above said Case?
3) How much RAM Required ?

Thanks for sharing information!!
DB size is going to be too huge, you need to check for data archival option along with proper compression option.
As per requirement, you need good server setup like; CPU: 4 cpu, 12 cores and RAM will be good to start with 256 GB.
When you say 5 db server, is that it means 5 physical server not db instances rt?
If that is the case then you can go for SQL Server 2014 to use that in memory options along with so many good support for temppdb, query optimization due to cardinality changes, SSD support etc.
Intances will be:
INS1, 2 : main instance and archival instance, using first two servers out of 5 servers.
INS3: DR server, if it will not be active all the time and then we can easily check for 1/4 load on DR server so you can configure AlwaysOn to check INS1 and DR instance to get all HA DR part too.
In case of INS4, INS5 can be used for reporting purpose being configured as other replication to act as local DR too.
Hopefully I have covered all the available objects you have.
Santosh Singh

Have a dedicated TFTP Server for CCM cluster

Similar Messages

Maybe you are looking for