Have a error code 4013. iphone 4s wont restore after update.

my iphone will not restore after update. it is stuck in recovery mode. i get error code 4013 everytime a try to restore but i cant find anything on error code 4013.

DFU mode is also good as stated above, however the instructions for DFU mode are below (please note this is not the same as recovery mode) -
Plug your device into your computer.
Turn off the device.
Hold the Home button and Power button for 10 seconds
Release the Power Button but keep holding the Home button
Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
Make sure the device screen is blank and no logos are present, device screen should remain black.
Error 4013 is due to security software issues. Uninstall all security software completely, try again, if the issue persists I would either recommend another computer or calling AppleCare tech support at 1-800-APL-CARE (for US customers).
Note- this is even if your device worked fine prior to iOS 7 update with your security software. The change in the operating system on the device can cause compatibility issues with these other programs.
I hope this helps it worked for me!

Similar Messages

  • HT201412 I have geting error code 1015 when try to restore to factory seting iphone 3G. any one know how to solve it on PC

    I have geting error code 1015 when try to restore to factory seting iphone 3G. any one know how to solve it on PC

    Your phone was jailbroken.  That's why you're getting this message.  We cannot discuss jailbroken phones here.  You're on your own.

  • Ipad 2 wont restore after updating to ios 7

    ipad 2 wont restore after updating to ios 7

    Hello pinky03,
    I would be be concerned too if I was not able to restore my iPad.  If you have not resolved the issue, I recommend following the steps in this article for an issue like this:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error code 1,iphone backup and restore,now phone doesnt work at all and apple not in any hurry to solve issue,only had phone 4 mths,wish id stuck with iphone3 and never upgraded

    what a nightmare,no phone for 3 days and no sign of any positive help from apple.done backup and restore as wifi on phone stopped working,error code 1 and now phone doesnt work at all,apple say other people having problem but havent heard of anyone else,really disappointed in way apple are keeping me hanging on,phone is only 4 mths old

    My iphone is only 6 months old and I am experiencing the same problems. I have already had to have the phone swapped once with a phone that has a blown speaker. (The apple store is 2.5hours away so I havent been able to go back to replace the replacement) Since I did the ios 5 update, my phone says NO SERVICE and drops calls. It was speratic but last night, same ERROR message as you. As you know, if forces you to restore which caused me to loose valuable information and documents. insert loud profanity here _________. lol

  • Iphone 5 wont start after updating ios7.04v

    My Iphone 5 would not start after updating it to ois 7.0.4. It says i need to connect to itunes but when i do it asked me to restore to my original settings. when i tried doing that my iphone keeps crashing

    Hello shefali,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    Best of luck,
    Mario

  • IPhone won't restore after update to iOS 5

    I recently tried to upgrade to iOS 5 on my iPhone 4 but whenever I do, I receive the message: "iTunes was interrupted while restoring the contents of the iPhone “Thundercracker”. Would you like to restore this iPhone again now?" I've tried several times, with no interruptions, and can not get the iPhone 4 to restore from backup. The last backup was made immediately before the update and the iPhone was pretty full before upgrading.
    Anyone else having this problem? Any ideas on how to get my information back?

    When I tried to update to ios5 it gave me an error as well and stayed on the iTunes screen saying the device is in recovery mode along with an error number. Now,I had gone to apple store previously with this issue when tryin to restore my iPhone only. They said that sometimes the software might be crashing because of an app. The solution is to restore it as a New Phone. Then Put everything back manually. So when I was on the process of installing the new iOS 5 the error seemed to be similar and apple gives you all the troubleshooting codes and fixes. I had to put a command before proceeding. I did that and it seemed to work for one of the iPhones, I was updating 2 iPhones at the time. Then for the other one when it stayed on the iTunes screen I just disconnected and connected the USB cable again and instead of doin update I did restore first and then update and that solved the problem. After restoring it will automatically update and put the information you had before the update back to your iPhone .
    http://support.apple.com/kb/ts1275
    http://support.apple.com/kb/HT1808
    Hope this helps

  • HT201210 I have tried everything and my iphone still wont restore.  Does anyone have any resolutions?

    I have tried everything and my iphoe still eon't restore.  Does anyone have any top tips?

    Put iPhone into Recovery Mode and Restore with iTunes on computer. Open iTunes on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click Restore button of iTunes. If any Error messages are given write them down so you can look up cause and solution. If still problem, and if you have Warranty or AppleCare make Genius reservation and take to Apple for resolution.

  • I have an error code 80040154 when I try to download updates, why is this?

    I am running Windows Vista 32 on HP Pavillion m8400f.  When I try to do a download, Windows installer gives me an error.  I am confused and very upset.  This has been going on for months now.
    I went to Microsoft and followed their instructions to no avail.
    Can you help me?

    throwawayacct wrote:
    Your response is unnecessarily hostile, the user has a right to be upset here however he is calm and you are behaving improperly.  Your passive aggressiveness is obvious and your 'assistance' was unhelpful.
    If you are able to help the user please do so. We  do have moderators here in the forum.  I seriously doubt that we are in need of  self appointed individuals (that would be you) who somehow feel they have the right to judge a response that someone else made. 
    Why not  take the time toshow us that you know what you are talking about.  You can do that by actually helping resolve the original poster's thread instead of complaining.  If you thought my response was hostile, it makes me wonder what alternate universe you live in. 
    Have a good day!  
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Error 14 on iPhone 5 wont restore

    I was trying to factory restore my iPhone 5  in intunes and its now stuck in dfu mod suggestions ?

    You tried all of the suggestion from that link including the security issue and hardware issue.
    Sounds like you have jailbroken phone if you tried all that was suggestion on the link and are still having issue.

  • TS1372 I have an error code 1406 when trying to restore my ipod classic.

    I just had my ipod classic's battery replaced. I purchased this device in 2006 and the battery died in 2012 (approximately 11 months ago). What else can I do?

    Did you try all the numbered suggestions in the linked article?
    http://support.apple.com/kb/TS1372

  • I NEED HELP!! my iphone 5s wont activate after updating to ios 8 . what is wrong?

    hello! I updated to ios 8 two days ago and it was ok. I started using my iphone later that day and it just rebooted . Now it wont activate .

    look... I start my iphone and and it goes to main LOCK screen where a message is shown, the message is "activation needed" . After I slide to unlock  and write my security code it goes directly to the activation page , not to the very begging ,where you should select the lenguage but from the part where you have to chose a wifi connection . I connect to wifi and the activation process starts . On the screen is a message that tells me to wait a couple of minutes . After a couple of minutes there is another message shown on the screen where it tells me that the activation server is unreachable for the moment , please try again later . and this procedure can be repeated    a hundred times and the same message will appear . It wont eaven reset . Any ideas wat is rong with it

  • Factory unlocked iphone 5c wont restore or update

    The problem started when i had too little space on my phone (ios 7.1.1) to update to 8.1 so it asked me to make space for the software. I deleted enough off of my phone and started to download it over wifi. The ios update would crash halfway and say there was some kind of error and every time i tried updating it after that it would never update. Another problem is the fact that i have no sim card in the phone and it says "Searching..." and even when i do have a working sim card in the phone it still says "Searching..." So now i updated my iTunes on my desktop and am currently trying to update and restore my iphone. i first tried updating it without restoring it through itunes and itd stop at around 60 remaining minutes and ask me all over again if i was to Download ios 8.1 or Download and Update to ios 8.1 and this has been happening for 2 hours. Then i would try restoring it and it would do the same thing. I dont understand what is happening???? help

    A) You can not activate the phone without a SIM card. There is no way around that.
    Also, You really need to give us something more to work with than "there was some kind of error".
    If you can't tell us EXACTLY what the error message said, we can't be of any help.

  • TS4062 iphone 5 wont sync after update

    itunes wont sync

    10.7.5 is Lion.   10.5.7 is Leopard.  Which do you have?
    Go to Apple menu -> About This Mac
    1. If it says Intel CoreDuo, you can only upgrade up to Snow Leopard 10.6.8.
    2. If it says Intel Core2Duo or i3, i5, or i7, you need to buy Snow Leopard, install 10.6.6 or later to buy 10.7 or later.
    Before you go down path number 2, recognize there are a lot of software title not compatible with 10.7 or later that are with 10.6.8 or earlier.  See this tip:
    https://discussions.apple.com/docs/DOC-6271
    Note the iPhone 5s can run a minimum of iOS 8.1.3 which will sync with 10.6.8 and iTunes 11.4.  You only need 10.7.3 or later for syncing with iCloud itself.
    And iTunes pre-version 11 is required to maintain iTunes Cover Flow.  If you like Cover Flow, you may just have to resort to syncing your phone with Windows on your Mac.

  • Iphone 3GS wont activate after update

    I tried to update my phone and it came up with an error message, I have since restored to factory settings but now it won't activate.
    It just comes up with
    We're sorry, we are unable to continue with your activation at this time.
    Please try again later, or contact customer care.
    I've tried this several times through wi-fi and i-tunes connections.
    It is an iphone 3gs on the orange network, there is a working sim in the phone.
    Let me know if there is a solution.
    Thanks

    "We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care...Your request Could Not Be Completed?"
    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

  • IPhone 3g wont start after updating to 2.1

    im going to start from the beggining, it all started yesturday when i left with my school to the football game, i turned off my iphone, when i came back like 6 or 7 hours later, i notice that all the icons are messed up, and the PHONE application doesnt work, well, i was able to text still but when i open the phone it would crash and do nothing else
    when i came home and saw this new 2.1 software, i installed it and things got worse, now since yesturday my iphone only shows the apple logo and a it vibrates every 10 seconds with a spinning circle in the middle, it wont do anything else, i tried restoring it, nothing happen, upgrading again, nothing happend
    PLEASE HELP ME AS SOON AS POSSIBLE..thank you
    p.s
    we won the football game 33-0

    Yep my phone is very smooth now, no keyboard lag either! i am loving my iPhone again

Maybe you are looking for

  • Choose statement in rtf template

    Hi Gurus! I'm building a report on rtf template (Bi Publisher Addin for MSword). If I insert a "Choose statement", every time I run the report the content of choose go on a new row. I want to avoid this behavior and that the "choose" is show on the r

  • Delete a datafile in 11gR2 ASM

    Here is the current datafiles of the database 11gR2, 11.2.0.1 on the ASM file system. SQL> select FILE_NAME,TABLESPACE_NAME from dba_data_files; FILE_NAME TABLESPACE_NAME +DATA01/heat/datafile/testtbs.274.807968419             TESTTBS +DATA01/heat/da

  • Oracle Developer Suite 10g (10.1.2.0.2) And Webutil

    Does Oracle Developer Suite 10g (10.1.2.0.2) already contains preinstalled webutil or shall i have to install or configure it seperately (manually)? If is there any version of Oracle Developer Suite which have already installed webutil, i mean there

  • ASA 5520- ISP change proceedure

    Hello, our company is going to change its´ ISP. The External Ips are going to obviously change too. We have an Active/Standby Firewall and we would like to make the change with at least connectivity downfall as possible. In our configuration we have

  • GL Code recording

    Hi Experts, I want to do recording for a GL code creation.I am facing issues for different account groups with different field status.If I record for a specific account group,It may not be suitable for other groups.I want to record for all the fields