Have a generic integration question
Hi,
If you a have a non-SAP system (like Oracle forms based application using oracle DB) that is not SOAP/HTTP/JMS capable, how can I have that system push a message out to SAP through XI..Here is what I was thinking
> The system outputs a file, XI file adapter reads the file and posts a message to XI and then gets putshed to SAP
> Have an XI JDBC adapter read a database on that system and send the message to XI.
Any other options or architectures from your experience
mad
Hi again,
if the system has some kind of API then normally there would be a possibility to create a message and sent it to XI (push), rather than XI pulls the message from somewhere. But that really depends on the system and cannot be answered in general.
However database polling is not that inefficient, so you might give that a try. i have seen productive scenarios where the database is polled every minute and there were no problems with performance.
For the adapter development: we have done that and got our adapter certified by SAP. We are now developing additional ones. In general we can say adapter development is a complex topic, so it should always be the last resort if there is a very special requirement which can not be fulfilled by any other solution. An adapter developer / development architect would need in depth knowledge of the adapter framework, java xml handling and the backend system with which the adapter needs to communicate. So it is not an easy task...
regards
Christine
Similar Messages
-
Hi,
I'm not sure where to ask a Process Integrator question so I have
decided to ask here. I have been asked to look at business
process (workflow) automation. I have read the datasheet and your
whitepaper on Process Integrator and my question at the moment
is "How do we integrate Process Integrator with existing sets of
EJB's? How does it tie together with WebLogic 5.1 (is it a bunch
of EJB's deployed on top of the app server ala Commerce Server)?
I'm looking for more technical answers so that I have a reasonable
understanding in estimating how much work/effort it would take
to use this product. I also know that this is your engine for your
future Collaborate product, however, that product will not be
available soon enough to tackle our customers current needs.
Thanks for your patience in reading this long message and
I would appreciate any answers including "forget about it until
Collaborate goes to market!". I would like to give an honest
technical reason to my manager about why we should
consider (or not consider) using Process Integrator.
Thanks again!
Hugo
408-861-5292
marchFIRST
Cupertino, CA 95014I don't know much about WLPI, but I have forwarded this along internally and
someone should be contacting you soon.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Hugo Penafiel" <[email protected]> wrote in message
news:[email protected]..
Hi,
I'm not sure where to ask a Process Integrator question so I have
decided to ask here. I have been asked to look at business
process (workflow) automation. I have read the datasheet and your
whitepaper on Process Integrator and my question at the moment
is "How do we integrate Process Integrator with existing sets of
EJB's? How does it tie together with WebLogic 5.1 (is it a bunch
of EJB's deployed on top of the app server ala Commerce Server)?
I'm looking for more technical answers so that I have some
understanding in estimating how much work/effort it would take
to use this product. I also know that this is your engine for your
future Collaborate product, however, that product will not be
available soon enough to tackle our customers current needs.
Thanks for your patience in reading this long message and
I would appreciate any answers including "forget about it until
Collaborate goes to market!". I would like to give an honest
technical reason to my manager about why we should
consider using Process Integrator.
Thanks again!
Hugo
408-861-5292
marchFIRST
Cupertino, CA 95014 -
I am being prompted to enter security questions when making a purchase on my new IPad. I don't believe I have ever setup security questions on my apple id. I have tried logging into my apple id and have chosen the security and priviacy settings to set up security questions. However I am prompted to enter answers to security questions and am told they don't match. How to I create new security questions or reset them?
You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104011) -
XMLP 5.6.2 Generic setup questions
We have this configuration and wish to get started with XML Publisher:
11.5.9 Linux Production application server
9.2.0.6.0 Linux Production database server
11.5.9 Linux Development/Test (shared) application server
9.2.0.6.0 Linux Development/Test (shared) database server
Our Fusion Middleware rep suggested that we download the XMLP562_generic.zip and install XML Publisher.
I have read the Install Notes and have a few technical questions that the rep could not field.
1) Where does the Publisher get installed? The application server?
2) If so, and we install it on our shared Dev/Test server, will it affect both instances?
3) 10g is required to 'send' or 'schedule' reports. What is the definition of 'sending'?
4) After it is installed, will we see any changes to our 11i existing .rdf reports?
I'd like to know these answers before we pass the instructions along to our DBAs.
Thanks,
-TracyI know it 's been a long time since this post, but I am trying to achieve the same in 10.1.3.2 Standalone. The documentation for Standalone is not clear, or I'm missing something. Has someone gotten bursting working using data from the original xml output as the source for bursting and gotten it to work?
If so, please help. -
I have forgotten my security questions and can't buy anything of iTunes or the App Store what do I do?
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
(96610) -
I have an Apple ID which I use for itunes. I cannot now access the rescue email account I gave when registering. I have forgotten my security questions and they keep sending emails to the email address I can't access and now I am locked out.
If you don't have accessto your rescue email address (you won't be able to change it until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57 -
I have forgotten my security questions but the email to reset them is no longer active how do i change it to send it to a different email?
You won't be able to change your rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
I have forgotten my security questions and the email linked to these is no longer working. Is there another way I can change my security questions?
Click here and request assistance.
(75745) -
I have read all the questions regarding the "Can't send photo using iMessage".
I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
It will try to send but it will get stuck just before it sends
and the red ! will appear with the "Not Delivered" status.
When i tap on the !, it just says "This iMessage was not delived".
No other message or photo is sending as the same time as the photo.
I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
What's wrong?!?!?!?!It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.
-
I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron -
How do you change your rescue email if you have forgotten your security questions?
I've had my IPad for about 2 years now and I have bought a lot of apps since but all of a sudden it asks me to answer my security questions whenever i try to buy an app! I click the link to the apple Id page and it says resend security information to my email. apparently the end of my email ends with yahoo.com and whenever I log on to that it's yahoo.ca and I cannot find the email with the instructions to change my security questions!! So please me as this has never occurred before! How do you change your rescue email if you have forgotten your security questions? And can you somehow purchase apps without answering your security questions because I just put 25 dollars onto my apple id and I don't want it to go to waste! Please help me!
You won't be able to change the rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
hi I want to change your e-secret questions because I forgot the answers I have tried sending reset questions on my mail and I have not received mail
New mail that I want is [email protected]
Alternative to the Old oneFrom King Penguin
If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox) -
my friend set up my itunes account and they have forgotten the secret question and i need it for something on itunes HELP!!!
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
-
You need to have xlsm where you can access the macro in numbers. this is frustrating that the idea of Numbers is to make it like Excel yet you dont have this capability. Question is, when will it happen or will it happen????
Hi brev,
Several points here:
1. Although there is some compatibility between Numbers and Excel files, I doubt very much that "the idea of Numbers is to make it like Excel." The two applications share some similarities, but also have several differences.
2. Your Question is unanswerable in this forum. Apple does not generally reveal future development plans or schedules for its applications, and anyone with knowledge of those plans will be bound by a non-disclosure agreement.
3. "You need to" implies a feature request. If you want to request that a feature be added to a future version of Numbers, that request is better made directly to Apple, via the Feedback channel, than here, where the readers and responders are all users of the software, not developers. From the application menu (the "Numbers" menu in Numbers), choose Provide Numbers Feedback, then make your request for a feature to be added to Numbers.
Meantime, if you absolutely need the macros capabilities of MS Excel, try one of the Office clones—OpenOffice.org, LibreOffice, or NeoOffice, which may offer macro support, or use the Mac version of Excel itself.
Regards,
Barry -
I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.
It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.
Maybe you are looking for
-
Question: I have changed my Pple ID. However The PPS Store insists that the cancelled ID is me, and trying to change either the name or password is an endless circle. The email account name I previously used was, I believe, hacked so I terminated the
-
Require Transfer a Field value of CRM to a Field in ECC system
Hi All, We have a requirement where in Each time when a business Partner data is saved on the BP Tcode screen in CRM, CRM Table BUT0IS Field IND_SECTOR need to be mapped to ECC Table KNA1 Field BRAN1 based on condition that table BUT0IS field ISDEF =
-
Gmail accounts added to iphone. only one account will work.
I have a new iphone5. I have 2 gmail accounts. I can only add one account but it will not accept my other account either by itself or with the other account. the second account that won't be accepted is protected by the google verification code. Any
-
Dragon Dictate headset not recognized by V3
The usb headset came with Dragon Dictate v3. After defining the Profile and proceeding to Training, I am instructed that I need to attach the headset!!! I have been a user of Dragon Dictate since its inception ... it isn't me! Frustrated Chuck
-
Hello Guru In stock trasfer oder (plant to plant or co code to co code) with Ci how is procedure where we can use out going excise invoice (J1Is) plz tell me details of this one stock trasfer order with CIN Sap