Have a HP 1220 printer - need it sa a wireless - bluetooth only option?

I'm considering using my HP 1220C printer as a wireless printer, what's the best option here? I currently have a netgear 834PN adsl wireless router.
I guess there's nothing available other than maybe a bluetooth device that can enable my printer to be wireless?
Anyone know what kind of performance I can expect to get?
Thanks for any advice.

Hi,
The Photosmart B110 do support AirPrint. Apple's document above do show the same as well ;-) :
HP Photosmart Wireless e-All-In-One B110—Europe and Asia-Pacific
http://support.apple.com/kb/ht4356
The behavior you describe may indicate lack of support for Multicast for your router, that may cause the printer not to be detected..
Try rebooting your router by unplugging it for 30 seconds, wait for 1-2 minutes, reboot both the pritner and the iOS device and try printing again.
If tthe same persists, it may help knowing your router brand and model to better understand its capabilities and suggest you any further steps.
Shlomi

Similar Messages

I have a 5610 Officejet Printer Need help making Wireless

I dont know how to figure out to do wirless printing .

Hi there shooksfay,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system is this?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have a hp 8150 printer I keep getting a paper jam only when tray 3 is out of paper jam from tray

I keep getting a paper jam in my hp 8150 printer when tray 3 is empty and the first sheet try to pick up from tray 2 it seem to jam at the pickup rollers. Yes, I replaced the rollers and it always seem to jam when tray 3 is empyt & it try to pick up the first paper from try 2

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Grayscale printing only option in Pages"

I have a TX400 Epson printer and it appears there is not an option for Gray Scale printing only in Print Preview as you might expect .Apple support told me this was a function of the printer's drivers but Epson say otherwise.Is there a driver or firmware I can download or is there something in i Works or Leopard that I need to activate to correct the issue.?

Caveat: I’m using Tiger and an Epson Photo 1400 so maybe things won’t be the same but should at least point you in the right direction. Click on Copies & Pages and scroll down to Print Settings. There you can choose Color or Grayscale.
Walt

IDCS OSX10.4.11 Print Presets - Device Independent the only option

I have a clean build of 10.4.11 with InDesign CS installed from disk. First of all the update to 3.0.1 will download and install (I do make sure IDCS is closed) however it does not actually do anything even thought it says it completed successfully. I have tried this on 2 separate machines with similar results.
Second problem is really the more pressing matter. The machine is part of an Active Directory domain. The main admin account is able to see the menus just fine. However when a normal managed user logs in you get this.
When you go to File > Print Presets > Define > New... > Select Postscript File for Printer drop down > Device-Independent is the only option available for PPD. This is an issue because it does not allow for paper-sizes and other settings to be set. I really hope someone has overcome this issue and can direct me to fix it. I'm pretty savvy so please don't worry about explaining too in depth. A simple direction would help TONS.
SAMPLE IMAGE:
Thanks much,

I have only a slight idea, but I'll give it a shot. Do you actually need the PPDs for the printers in your domain? If you're printing to PS and distilling, then you can just make sure that the user account in question has the PPD files in the correct places, as per Steve's post above. Drag and drop. You'd want to use the PPD folder in the user's library, of course, as I assume that the user that
i can't
see the PPDs wouldn't be able to see the system library at all.
If, on the other hand, you need to be able to get at the same PPDs as everyone else in your domain, then I think that your question is actually about CUPS. From a ten-second Google search, I'd guess that the user acct. must be able to get at the PPDs in /usr/share/cups/model/. Just a guess, though; it's been years since I've needed to know this kind of information.

HT1443 I have a macbook with mac osx 10.5.8 and i have a new hp printer that requires mac osx v10.6 or mac osx v10.7. do i need to upgrade and if so how do i do it and which version should be downloaded

I have a Macbook with Mac OSX 10.5.8 and i have a new hp printer that recommends version 10.6 or 10.7. Do i need to upgrade, what version, and how do I get and install this upgrade? Thanks

Full instructions here:
https://discussions.apple.com/thread/4540761

I have a Apple imax only about 9 months old. I need a new printer. I am looking at a Canon MX926 PIXMA. Do I have Airprint or do I need to purchase it? I am a novice with Apple and any assistance would be greatly appreciated.

I have a Apple imax only about 9 months old. I need a new printer. I am looking at a Canon MX926 PIXMA. Do I have Airprint or do I need to purchase it? I am a novice with Apple and any assistance would be greatly appreciated.

Welcome to Apple Support Communities
If your iMac is only 9 months old, it probably comes with OS X Mountain Lion, and it includes AirPrint, so you do not need to purchase anything else apart from the printer (which is compatible with AirPrint).
Once you have purchased the printer, you need to follow the steps of the manufacturer. To add the printer to OS X, see > http://support.apple.com/kb/HT4670

I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer. It prints and copies, wont scan. I see old threads on this, nothing recent. ?can i make this work, or do i need a new printer??

I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer. It prints and copies, wont scan. I see old threads on this, nothing recent. ?can i make this work, or do i need a new printer??

Hi Newbie111
I see that you are unable to scan with the Photosmart 1315.
What driver are you using?
The driver listed in the url below is a basic print driver that will allow you to print only.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ps242muc&c c=us&dlc=en&lc=en&os=1006&product=61956&sw_lang=
You can try using the apple drivers in the url below.
http://support.apple.com/kb/DL907
If you have any further issues please let me know.

I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?

I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?

Try resetting the printing system.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I have the f4500 all in one printer need to know how to mirror my image

i have the f4500 all in one printer need to know how to mirror the image in easy terms

Hi bbfoot,
If you are having issues setting up your HP printer on your Mavericks machine, you may find the following article helpful:
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Regards,
- Brenden

I have mac os 10.7.4 update for hp photosmart c4100 series printer (printer needs a driver), where do I find a driver?

I have mac os 10.7.4 update for hp photosmart c4100 series printer (printer needs a driver), where do I find a driver?

The last driver that Canon released for the iP6600D was v10.51 for OS X 10.7. You could try downloading and installing this driver via this link.
Note that the driver may not be digitally signed so Gatekeeper will block its installation. To get past Gatekeeper, you can right-click on the installer and select Open from the pop-up menu that appears. You will then be given the option to install the driver.

Since I downloaded Security Update 2012-006 for Mac OS X 10.6 I have been unable to print or upgrade my Quicken 2006. How can I fix this? Hurry! I need to pay my bills. thank you very much

Since I downloaded Security Update 2012-006 for Mac OS X 10.6 I have been unable to print or upgrade my Quicken 2006. How can I fix this? Hurry! I need to pay my bills.
thank you very much

Looks like Apple did the same thing with Lion that Microsoft did with Vista. Brought it on the market before it was ready.
I run a MacBook Pro and upgrading to Lion caused me two days of trouble and computer crash. Router settings removed and router blocked. Dongle not recognised, you name it.
In the end, I gave up and using my Snow Leopard installation disk and a Time Machine Backup finally got my computer up and running again. Thanks to Lion, I think I'll stay with OS X 10.6.8 at least it's reliable.

My home page changed and now I can not print . i need to do this now I have been trying to print since last week fire fox is block

I can not print from my emails, since my email page changed fire fox is blocking them Please call and fix this I have not been able to print since last week i have business paper work I need to finish I can not spend any more time on this I have also been on the phone yahoo
<sub>edit: removed personal information for your protection. please note that we cannot offer support via telephone, so please continue in the forum. thanks for your understanding! (philipp)</sub>

Hi Vicki, you also mentioned your home page changing. If Yahoo is your home page, this is normal as they keep updating things.
In some cases, if your home page is a specific server address instead of a more general address like
* http://www.yahoo.com/
* http://my.yahoo.com/
* http://mail.yahoo.com/
then Yahoo will need to redirect your browser to a different server.
Users have reported on this forum that this can lead to email problems like broken features as well as display glitches.
To make sure you get the server that Yahoo intends for you, please go to one of the above Yahoo addresses and follow the link to your email. Hopefully this will resolve any problem with the redirection and you can save the new address in place of the old one (home page, bookmark, etc.).
Also, when you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site. If Yahoo support did not already recommend this, here are the steps:
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

I have a Dell v715w printer and can't make it work with my macbook, need help

I have a Dell v715w printer and am having difficulty making it work with my MacBook Pro, need suggestions.

Hi,
The printer do support AirPrint (the HP Deskjet 3525 is part of the 3520 Series).
Make sure your printer connected to the same router as your iPad and it shold be listed..
Be aware that you need iOS 4.2 or higher and your router should support Multicasting for AirPrint to work..
If the printer isn't listed please clarify your router brand and model, some routers don't offer Multicasting or have the protocol disabled by default.

Have a HP 1220 printer - need it sa a wireless - bluetooth only option?

Similar Messages

Maybe you are looking for