Have a iTunes music player file that won't open through iTunes - help!

I downloaded a music file from the internet that is an iTunes music player file, and now when I try to import it to iTunes it won't open or even if I just try to open the file it brings up iTunes, but no music is opened or played. I've tried to change the file's format through iTunes but i couldn't figure that out and I've tried to save it as a different type of file when I downloaded but that didn't work either. HELP PLEASE! I WANT MY MUSIC!!

Katrina S. wrote:
You have to have some kind of unzip program. Windows does not come with a built-in unzip program.
Useful info, Katrina. It's been so long since I had install an app to handle that (Remember Stuffit?) that it didn't occur to me that Windows either couldn't do it or didn't come with a utility along with all the other stuff that seems to come on an new computer.

Similar Messages

I have recently received a pdf file that, although previously opened, now shows totally blacked out? What can I do to correct this?

I have recently received a pdf file that, although previously opened, now shows totally blacked out? What can I do to correct this?

Hi rdfnra,
Please check the Page Display preferences (File > Preferences/Acrobat > Preferences) and make sure that Show Large Images is selected. If sounds as though this PDF may have been created from a scanned document, and this preference is disabled.
Please let us know how it goes.
Best,
Sara

Is it possible to save a file that won't open anymore?

I have an Indesign CS6 file that I haven't opened for a few months and now it won't open and crashes Indesign each time I try opening it.
All other Indesign files are OK, but this one???
Does anyone have any suggestions bar recreating the file, which is my last resort. I do have the PDF that I sent to the printers, but need to add in two new pages.
Many thanks

I'd like to echo Peter's concerns about opening PDFs in Illustrator... Illustrator is not a PDF editor. The only PDFs that can be safely opened in Illustrator is a PDF that is saved from Adobe Illustrator using File>Save As>PDF.
There are other options available - Markzware can and do as far as I know convert the InDesign file to Quark and back to InDesign as a service - you could try contacting them if all else fails http://markzware.com/support/
Dov Issacs wrote:
On behalf of Adobe Systems Incorporated, I will advise you that Adobe Illustrator is *not*, +repeat+ *not*, +repeat yet again+ *not* a general purpose PDF file editor.
The only full PDF files that Adobe Illustrator can safely open are PDF files saved from Adobe Illustrator itself using the save for editability option.
Why? Adobe Illustrator operates in +either+ CMYK +or+ RGB and +only one+ specific color space per document. Thus, a color-managed PDF file with more than one color space with opened in Illustrator would be ruined. Also there are many PDF constructs that Illustrator knows nothing about. At best, they are treated as foreign objects that cannot be edited. And for text, Illustrator only "understands" particular encodings. General PDF can lose text when opened in Illustrator.
Illustrator can often be safely used to modify specific, simple graphic objects as the vector graphics touch-up tool editor, but not much more.
Proceed at your own risk!
- Dov
Dov Isaacs wrote:
On behalf of Adobe Systems Incorporated ...
Adobe Illustrator is not, repeat not, and repeat yet once again not a general purpose PDF file editor. Opening any arbitrary PDF file in Adobe Illustrator other than PDF files saved in that version of later of Adobe Illustrator with the editability option (which saves the Illustrator document editing data as private data within the PDF file) may result in content loss or corruption.
To answer your specific question, don't expect any PDF layers from AutoCAD to be preserved.
- Dov
Dov Isaacs wrote:
PDF layers are part of an overall feature known as optional content in PDF and are conceptually very different than Illustrator layers. Since PDF optional content features in general are very much a superset of Illustrator layers (PDFMaker for PowerPoint uses optional content to handle certain slide build features, for example), there would be no easy way for Illustrator to readily pick and choose what optional content features to support and translate. As such, don't expect this to be "rectified" in any way in future Illustrator releases.
(To make things even more interesting, both PDF and Illustrator layers are very different than Photoshop layers which allow for defined interactions between layers such as masking!)
- Dov

Need to edit a Captivate file that won't open. Can the SWF be edited?

We are currently using Adobe eLearning Suite 2 (Cp5).
We have 2 older Captivate files (Cp 3 or 4) that will not open; they act like they're opening but eventually they just time out without the error message that you normally get with a corrupt file.
So all we have access to are the SWFs & zip files that were uploaded into our LMS.
We are switching to a different LMS and need to quickly make an edit to these files before they are uploaded to the new LMS.
Is it possible to edit the SWF (delete about 30 seconds of content off the end of each file) and still have them function as far as registering completion? And if so, what program would I need?

Sorry, but only Adobe can speculate as to why the older files refuse to open in the newer version. Phase of the moon? Jupiter aligning with Mars while the house of the Moon is in retrograde?
Personally, I'm going with the Mass Coronal Ejection theory!
Assuming there is really no interaction going on, you *MIGHT* be able to fudge things to get that last 30 seconds to go away by playing the SWF and using Captivate to record the SWF as it plays.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

I recently upgraded from a iMac mini PPC (pre-intel chip) to a new iMac (intel chip). I know that some of my software won't functionally transfer over, but I have some files that were done using Appleworks (.cwk text files) that won't open. Conversion?

Is there a way to convert .cwk text files I saved from my iMac PPC so I can view them on my new iMac (intel chip)? I get a message when I try to open them now that says PowerPC applications are no longer supported.

1. Read Roger Wilmut's excellent series of articles: Abandoning Appleworks
2. Considering running Appleworks in Snow Leopard (with Rosetta) installed into Parallels for use in Lion or Mt. Lion
[click on image to enlarge]

Need help with .mov files that won't open

Here's the situation...
I have 2 dvdr's with 4 .mov files on them. when i try to copy them to my desktop it tells me that
"the finder cannot complete the operation because some data in "BonJovi_Who_SaysDV NTSC.mov" could not be read or written. (Error code -36)
I have to gain access to these .mov files tonight or I'm gonna be a real shithead. I just got the discs fedex'd to me today so I didn't put it off til the last minute. Can anyone offer any possible solutions? If so, please help.
Java

Putting aside copyright issues in (naive?) belief you have a legitimate use of the material, your problem lies in the file or disk. One of them is either corrupt or not compatible with the drive you are trying to read it on. Try it on another computer (even a PC) and if you can read it on that computer make a new copy of the file on a new disk or a firewire drive (or USB stick if it fits).

TS1859 I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

hi
download perian from internet, it'll solve your issue.

'Itunes music player' file- HELP ME

I recently downloaded (legally- so it should work) an album online and it saved into my downloads on my computer as an itunes music player file. i cannot get it to open or play on my itunes, anyone know how i can do this? thanks.

A .zip file is a compressed archive and needs to be uncompressed with an unzip utility such as WinZip. That should give you the actual track files which you can drag into iTunes.
Regards.

I have ipad wi-fi cellular. Photos won't open when I insert the SD Reader. I tried syncing photos through itunes and that didn't work either.What do I need to do to get photos on ipad?

Have ipad wi-fi cellular. Photos won't open when I insert the SD Reader. I also can't download photos from pc through itunes. Need help getting pictures on ipad.

For the SD card, are you copying the photos onto it yourself from your computer ? If you are then you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them.
In terms of syncing photos, what happens when you try ? You should be able to sync photos by connecting your iPad to your computer and selecting the iPad on the left-hand side of your computer's iTunes, and on the right-hand side selecting the Photos tab - using that tab you should be able to select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.

The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message

Hello,
Please help me figure this out. I'm very unhappy at the moment. I'm fustrated and don't have any idea how to revert to the original version before the update was done on iMovie 10. I NEVER hated APPLE until NOW!! I love APPLE products and apps so please help me stay in that mindset. So I worked on some movie projects when I got my macbook pro 6 months ago. I update reguarly. I saw the update prompt and honestly, I did not think I would have ANY issuess with opening my previous files that I created only a few months ago with this updated version.The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message and the iMovie app closes. Last night I saw the file and tried to open it but no luck. Error message came up again. I reboot and turned off my laptop for the evening and tried again just now but nothing!! I need that video. My job depends on it! I worked so hard on this wedding video and now it's lost and won't open. I work another job and don't have much time. I really don't want to start all over again. Please help me. Thanks so much for your assistance.
Fustrated APPLE customer
Jolly A. Rupp

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas?

I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas? I can hear the PC beep when plugging it in! I suspect a bad battery and trying to charge it ina wall charger made it hot!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar

I have NEF files that won't preview in Bridge CS6

I shot two D3s last night and downloaded both cards. One the NEF files preview like normal and the other has NEF files that won't preview but open in Photoshop just fine. Anyone know why they won't preview?

You could try purging the Bridge Cache it may be messed up. Edit>Preference>Cache>Purge Cache

Here's a fix for uploaded files that won't play.

Is this you? You've found a lot of files were uploaded, instead of matched. Some of those files might even be on albums where other tracks matched. Sure you want them ALL to match, but meantime, it would be nice if uploaded files would actually play! Sure, you can see their names, track durations, etc. but if you try to play them directly, nothing happens and if you try to play an album through, when it gets to an uploaded track, it stalls or skips past it. You've checked the file type and it's an AAC so you figure it can't be a file encoding incompatibility problem and besides, whatever the file type, Apple is red-flagging anything incompatible, tells you it's ineligible, right?
Guess Again - not all AAC files are produced with the same encoder and some of them, while they'll get past Apple's eligibile/ineligible screening process, probably shouldn't.
I routinely record vinyl using Audacity and at various times I've used different encoders (not that I knew it until now). As a result of checking which uploaded files play and which do not, I'm pretty confident of the following. While some AAC files created outside of iTunes might work, those encoded using Lavf52.36.0 will not. Neither will files encoded using Lavf52.64.2. There may be others.
So what's the fix? The same one recommended for getting files flagged by Apple as ineligible to pass muster. You need to make an AAC copy in iTunes and swap that for the uploaded files that won't play.
Here are the steps I use to get it done. You may be able to streamline the process though.
(1) Turn off wi-fi to prevent iTunes Match from attempting to match any new files until you're good and ready. If you don't to this, you may end up with files you've just created being flagged as duplicates.
(2) Select all files in an album that has some bad uploaded files. Select Advanced > Create AAC Version. (NOTE: I don't bother trying to separate uploaded from matched, just too much hassle.)
(3) Select one of the files, so you can File > Reveal In Finder. Generally this will get you to the album folder that includes both sets of tracks. The ones you just created will have a "1" in the file name.
(4) Create a folder on the desktop and move all the newly created files to it. Delete the "1" from the file names. Name the folder based on album title.
(5) In iTunes, delete the listings for the newly created files.
(6) Turn on wi-fi and wait for iCloud to reconnect. Watch the cloud icon - it'll tell you.
(7) Delete the album from iTunes (You're now getting rid of the copy that was originally uploaded, so be sure you've really got the new AAC files handy to replace them with). Note you will see an option to delete from iCloud too. Check it. You want these files GONE!
(8) Select Store > Update iTunes Match. If you do a search for the album from an iCloud enabled iOS device (I use Apple TV) after the update is completed, you shouldn't be able to find the album.
(9) Select File > Add To Library and go get the folder of tunes you created.
(10) Run Update iTunes Match again.
(11) Watch the iTunes progress bar. Once the matching process has checked to see if you've added anything to your library, you'll see fresh copies of your songs uploading.
(12) As another means of confirmation, once several of the songs have uploaded, do an iOS device search for the album. You should be able to get the album to appear before the upload is complete. You may have to back out of the search and back in to get it to work, but chances are when you first see the album, the song titles will all be grayed out. Once the update is complete, give it a minute and everything should become available to you.
(13) Pick a track that wouldn't play before and watch to see if the timer starts to move, followed by music! It is now time to do a little happy dance.
I know this is a far cry from figuring out what it takes to get songs that should match to actually do so, but that's a whole different ball of wax.

Thanks this was useful. I have been ripping my audiobooks and I was finding that they would get uploaded to iCloud in the process, which in itself was fine, but then iTunes would not let me change the media type to Audiobook, which is annoying as it effects how iTunes treats the media. Like showing you the skip back 10 seconds button.
The general outline here helped me work around the issue and change the media type before the media was re-uploaded to iCloud.
Sean

I have a iPad were I have opened I tunes match ect linked to my pc I have since found my old ipod classic which I have loads of music on but that was all linked to a mac which I don't have anymore, is there anyway I can sync them both

I have a iPad were I have opened I tunes match ect linked to my pc I have since found my old ipod classic which I have loads of music on but that was all linked to a mac which I don't have anymore, is there anyway I can sync them both without loosing my music, if I plug my ipod into PC it won't read it

You need to transfer the music from your iPod on to your iTunes library on your PC, since that is where you are currently syncing and where you are signed into iTunes Match. It doesn't matter that you were previously syncing it with a Mac, and you won't need to reinstall iTunes on your PC. But you will have to use 3rd party software such as Touch Copy to transfer any music not purchased from the iTunes store from your iPod to your iTunes library. Here's another guide on this, which is shoter and you may find easier to follow: Syncing to a "New" Computer or replacing a "crashed" Hard Drive. Also, if you're using iTunes 11, go to View>Show Sidebar. This will make it easier to follow along with these guides.

TS1702 I have ePub documents that won't open using iBooks, how can i get them formatted so that I can use them

I have ePub documents that won't open using iBooks, how can i get them formatted so that I can use them

You could try downloading a program called Calibre. It is very good at converting files between formats. I use it all the time to convert PDF's from work to read on iTunes when I don't want to have to keep zooming in and out to read the actual text.
I know that iBooks will read PDF's but they can get pretty squashed down some times. Especially if the original font was small to begin with. So I run them through Calibre and then email them to my phone and open them in iBooks.

Have a iTunes music player file that won't open through iTunes - help!

Similar Messages

Maybe you are looking for