Have a MacBook Pro with 10.8.1 and want to print wirelessly with HP 3054 610a, currently connected via USB. Router is Apple Extreme without WPS button. How do I enter the said and passphrase to the printer. Can't use the cd install-no Mtn.Lion support
Have MacBook Pro, Airport Extreme router, Mtn Lion 10.8.1 and want to print wirelessly with HP 3054 610a which was installed 2 days ago via USB. Prefer to set up the printer on the wifi network, but how do I enter ssid and passphrase. On the printer control panel only has WPS option.
You didn't look far enough .... http://www.hp.com/global/us/en/wireless/printer-setup-help.html
The next thing is to look in the manual that accompanied the printer for how to use the wireless setup wizard!
This is specific to your printer ..... http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02217452&lc=en&cc=us&dlc=en &product=5109847#N728
Similar Messages
-
I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options
Bahamaguy wrote:
I have a MacBook pro late 2011 version it's not booting up ....
So what you want is to be able to boot from OS X and retrieve your files
Create a data recovery/undelete external boot drive
Of course if it's not booting up, it's easier to fix in place
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
"Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
Most commonly used backup methods
So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
There is no Startup Manager option to choose what to boot from?
This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
What did you use to make the external OS X USB bootable drive? -
Remote location, 7kbs d'load speed, 10 days to d'load Lion, only software updates are through the App Store. Why can't we d'load and install outside the Cloud anymore? Some of us can't use the cloud and never will be able to.
That is true - I apologize for not being specific - what I was mainly referring to is iLife applications. I have a notice on the App Store that says 3 apps need updates, I look at the apps and they are huge so since my connection is so slow I use my work connection and d'load the files from support to my Windows machine and carry them home, once d'loaded my MacAir states it cannot install, the update must come from the App Store.
I do the same thing for large Leopard and Lion files and I can install them without error, it is just the App Store files that the system stops. -
Extracting Project information
How can I programmably extract the project build information set in the project build specification.
So I can then use the information in an ‘About’ dialog.
DaveIn the labview\resource\appbuild folder their are some VI's that can deal with build specs! They return a variant containing the data!
It's the reason I build a variant probe.
Be aware that the build info is not present in th lvproj file of the built executable!
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
How can i detach the video from a clip so i can only use the audio when using imovie?
how can i detach the video from a clip so i can only use the audio when using imovie?
First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only. -
I have a macbook pro 2012 2.5ghz i5, i want to know would Ddr3 1600mhz So-dimm Cl9 be compatible?
I have a macbook pro 2012 2.5ghz i5, i want to know would Ddr3 1600mhz So-dimm Cl9 be compatible?
The correct RAM specifications for a 2012 13" MBP are: 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM. The best sources for Mac compatible RAM are OWC and Crucial.
Ciao. -
I have a macbook pro. I had iphoto on it prior to my hard drive crashing. Hard drive was replaced but iphoto is no longer on. How do I get it back without paying for it?
Have you tried
http://support.apple.com/kb/HT4928 -
Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full., Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full.
You can leave the charger plugged in, as you cannot overcharge...charging automatically stops when your battery is full. Once every 2 ~ 3 months, its a good idea to drain the battery to about ~ 40%, then recharge to full. Otherwise, you can charge whenever you like & leave connected whenever you like.
Try to avoid full battery discharges, Lithium batteries don't like that & frequent full discharge/recharge cycles will eventually kill your battery. -
I have an iMac which the mouse has lost connectivity. Batteries on mouse have been replaced and green light on mouse is on.
I can now use the computer as it does not respond to mouse or it appears to the keyboard. Just not sure if it is a problem with the computer its self?
ThanksI would highly recommend you run a test by trying another mouse with the iMac and see if that fixes it. That would tell you the problem is Not with the iMac itself.
Hope this helps -
If I change my old computer for a new one, can I use the Serial Number License of Première Éléments for the New one. Thanks for your answer. Daniel
Daniel Yvelines
More information is necessary to give you an answer that applies to your specific situation.
1. What version of Premiere Elements is involved and on what computer operating system is it running now and on what computer operating system will it be running on the second (new) computer?
2. How did you set up your first computer....purchased online download from Adobe to Window 7 64 bit, followed by install there OR installation from Premiere Elements installation disc purchased in box packaging?
True, Adobe allows a purchased serial number for a given version to be activated on no more than 2 of your computers.
That is a critical consideration. But in itself that becomes moot if other factors do not fall into place.
Looking forward to your follow up details.
Thank you.
ATR -
i need help asap
please??Hello bigdaddydeangelo,
I would be concerned too if my iPhone was not powering on. I recommend following steps 3-6 below:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi , Ilive in Bali Indonesia and my online itunes account is very limited .. How can i keep my apple id and use a different countries store to buy music etc ?
You can only buy content from your own country's store - to be able to buy from the Australian store you need a valid billing address in Australia and be in Australia when buying from it. Do you have access to other music purchase download sites ?
-
Please help!
you may have to do these steps a few times http://support.apple.com/kb/HT1808
-
How do I make my printer more secure while connected via USB to my Airport?
So a neighbor (a friend, fortunately) accidentally installed my printer on her computer via the network (her computer showed it as a 'Bonjour' printer) and started printing stuff, even though my printer is connected to an encrypted Airport Extreme.
My printer (an old HP deskjet 5550) is connected via USB to my Airport Extreme, which has a WPA2 secure password protecting it. Also, the "Share this printer" box was unchecked in the printer utility.
The DSL lines for me and my 20 condo neighbors all convene in the basement somewhere into one or several master routers.
I'm concerned about this breach of security (obviously) and wondering about security of my iMac as well. The iMac is connected to the base station wirelessly and has the firewall set to 'Set access for specific services and apps'.
I figured if the Airport Extreme has the WPA2 password set (and no one else knows the password) that no one would be able to gain access to the printer that is wired to it, or the iMac that's wirelessly connected.
What am I missing? How did this happen? and what can I do to ensure my network isn't visible or vulnerable to my neighbors or others with bad intent?are there settings in the airport utility that you can adjust to make it unshareable from the router?
The "bonjourness" of the access to your printer suggests that your firewall is probably doing its job.
If your DSL connection is connected to the WAN port on the AE then the folks on the DSL side of your set up should only be able to see things on your LAN that you've set for 'access from the internet'. e.g. allow access to my printer/disk/... from the internet.
For printers there's an airport utility setting 'share printers over ethernet WAN port' and 'advertise printers globally using bonjour'. How's that set? -
Which external hard drive is best for the MacBook Pro? Can I use the SuperDrive?
I am looking to buy a new external hard drive for my new MacBook Pro and just want the best one for this laptop. Can i use the SuperDrive? It looks like the SuperDrive is for the MacBook Air but wasn't sure if it could be used with the Pro as well.
Apple does not make external harddrives, except maybe the TimeCapsule which is Router/HD combo for use with the TimeMachine software.
http://store.apple.com/us/browse/home/shop_mac/mac_accessories/storage
There are many to choose from, and you will I sure get much advise across the board.
I would stay away from WesternDigital.
Othere then that OWC are a dependable supplier.
I am using a 1TB/QuadInterface/DiskGo/ by Edge they had a very sweet back to school discount promo.
Look around for your "sleek and thin in design" and a good deal as they all go on sale periodicly.
Think along the lines of USB 3, Thunderbolt if your machine supports it or at a minimum FireWire800.
Maybe you are looking for
-
What is difference between Iterator and Collection Wrapper?
Hi all, I dont understand the actual difference between Iterator and Collection Wrapper. I observed both are used for the same purpose. Could any one please let me know when to use Collection Wrapper and when to use Iterator?? Thanks, C
-
Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how d
-
Hp mini 110 boot disk error after installing new hard drive and system recovery
Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installe
-
Hi, I´m using BW 7.0, i just installed SP13. I load 0VENDOR ATTR without problem, but I had a short dump loadind a DTP Text of 0VENDOR. Following message: "ASSERTION_FAILED" " " "CL_RSTRAN_GEN_STEP_DIRECT=====CP" or "CL_RSTRAN_GEN_STEP_DIRECT=====CM0
-
Oracle Open World 2013, Semtech user meetup?
Hi All, I am going to OOW and looking to meet other users of Oracle Semtech, is there any scheduled event already? If not, is anyone up for a chat/meetup in the Moscone area one of the evenings during OOW? Regards, Jerven