Have a MacBook. Shows I have an internet connection, but cannot get on. I do have connection with my other computer???

Have a MacBook. Shows I have an internet connection, but cannot get on. I do have connection with my other computer???

I've looked at the IP adress, and it started with 169.
This means you aren't actually connected to the Internet; only to your router.
An easy first attempt at a fix is to turn your router off and then on again.

Similar Messages

  • I have a MacBook Pro and all of a sudden  I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

    I  have a MacBook Pro and all of a sudden  I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

    BXB1905 wrote:
    I tried the Apple diagnostics it did not work.
    What do you mean it did not work!  What were the results of the diagnostic tests?
    Have you contacted your ISP to determine if the problem is on their end?  
    Have you changed your router channel?  Sometimes this resolves wireless problems.
    Your profile confirms you are using Lion.  Check out the following: 
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    Configuring 802.1X in Mac OS X Lion and Later

  • I have Adobe Photoshop 10 installed on my MacBook Pro but cannot get it to type an O with Umlauts as it does on the keyboard outside Photoshop

    I have Adbobe Photoshop 10 on my MacBook pro but when using it cannot get an O with Umlauts, which are easily done outside Adobe.  I feel sure that it must be possible, but nothing I have tried has succeeded.  Can anyone help?

    How are you trying to get the Ö? By holding down the O key or by pressing Option-U to get the umlauts and then press the O?
    I have a later version of Photoshop and am able to type Ö using the "Option-U + O" method, but not using the "hold down O" method. My guess is this has to do with the type engine inside Photoshop. Adobe apps tend to use a different type engine because it is capable of things the OS type engine cannot do.

  • I have bough music on iphone. They show up as purchased in store but cannot get them into my library on computer

    I purchased music on my iphone. When I am on my lap top they do not show up in my library. They show as purchsed in the itunes store, but I cannot get them to library. I would like to listen to the whole songs I paid for and not just the previews. Any help would be appreciated..

    Hello Husker Proud,
    Thank you for the question.  It sounds like you would like to download all of your previous iTunes purchases to iTunes on your computer.
    Follow these steps to download all your purchased songs:
    Download previous iTunes Store purchases to an authorized computer
    Click iTunes Store near the top of the iTunes window.
    Click the Purchased link at the right of the iTunes Store homepage (below Quick Links).
    In the page that appears, select a category. 
    iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download. If you select Music, you can view your purchases by song, artist, or album. If you’re viewing by album, click an album to see which songs on it are available for downloading.
    To download an item, click its Download button .
    To download all available items, click Download All.
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS4009 i have the "not enough storage" message on my iPad but cannot get to settings.  It seems like the ipad is locked.

    I have the "not enough storage" message on my ipad but nothing happens when I press the "close" or "settings" option.  It is like the ipad is locked.

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT1551 I have typed in my password for my airport express but cannot get remote to submit data, what do I press to submit without just typing more info?

    I do not know how to go past typing my password during configure to select SELECT to enter what I have typed.  This is using a silver remote.

    Just keep navigating in the direction of the button.

  • Wifi connected but cannot get access to internet

    Dear all
    I have my macbook pro with ma os x mountain lion10.8.2
    bu I have a problem with connection
    when you activate the wifi it show WIFI CONNECTED
    But umpossible to get acces to internet, why?
    Someone can hel me

    Shutdown the computer.
    Power off the router. Wait a while.
    Power on the router. Wait until all the lights are lit properly.
    Start up the computer. Try to connect to Internet.
    Best.

  • I have an ipad and a bluetooth keyboard which was initially set up with a family member's account. Their account has been erased I am now using the ipad but cannot get the bluetooth keyboard to connect. no device is recognized. any suggestions????

    I have an Apple iPad Mini With Wi-Fi 16GB and a Rock Bluetooth keyboard that was previously used by my daughter. Her information was erased from the ipad and I have set it up as a new user under my account. All went well until I tried to set up the keyboard. When I go to Settings and turn on Bluetooth the ipad does not detect any device. I know they were paired and working when she was using them. Could it be because the ipad/keyboard were operating with her account and know won't connect to mine? We do not live in the same city so how would I clear the keyboard so that I could connect it to a 'new' ipad?

    Hi sugaliko,
    You may need to set up your BlueTooth connection to the keyboard again. Use the steps in this article for guidance -
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • HT1349 I have a new laptop but cannot get my old itunes on it with my library please help

    Please help me get my old itunes on to my new computer, yes it is authorised but I cant get my music or anything??

    This issue does not have anything to do with AirPort networking. You may find that you will get better assistance if you repost it in the iTunes area.
    However, in the mean time, what is the make & model of both your "old" and "new" computers? Was both the iTunes Library and Media Folder located on that old computer? Do you use iTunes Match?

  • Visual internet connection, but cannot get on the internet? Help:(

    Hi people.
    My wife bought me an Ipod touch. This is a long time ago, because I cannot use it with my wi-fi connection home. I took it with me to my parents, and it worked without any problems there. I took it with me to my place, and I got the same problems.
    It says that I got connection and I have the Wi-fi connection icon, but I'm not connected to the net.
    I've tried to connect many times. I've deleted and restarted the thing. I've looked at the IP adress, and it started with 169. I've tried to look at this discussion board, but haven't found any help.
    I'm getting quite desperate, and I would like to get some help. Since I am quite a beginner, I would like a simple answer:) But any help will do great.
    Thank you

    I've looked at the IP adress, and it started with 169.
    This means you aren't actually connected to the Internet; only to your router.
    An easy first attempt at a fix is to turn your router off and then on again.

  • Power ran fully out on my MacBook Pro and is currently recharging. However, cannot get it to restart. Totally dark and have tried to deactivate via power button, keys and track pad but get no response

    Power ran fully out on my MacBook Pro and is currently recharging. However, cannot get it to restart. Totally dark and have tried to deactivate via power button, keys and track pad but get no response

    Sulapeace,
    for how long has your MacBook Pro been recharging? Has the light on your MagSafe connector changed color since you’d started recharging it? What do your battery level indicator lights show when you press the button next to them?

  • I have a Macbook Pro (2013) OS 10.8.1.  Moved into a university house and need to use ethernet cable. Bought the Thunderbold connection but when I try to use the ethernet with it a webpage comes up saying Wireless Setup? No idea what to do.

    I have a Macbook Pro (2013) OS 10.8.1.  Moved into a university house and need to use ethernet cable. Bought the Thunderbold connection but when I try to use the ethernet with it a webpage comes up saying Wireless Setup and Router Setup? I have previously used ethernets in similar situations and never had to input information like this?

    I have tried to turn of the wi-fi but that doesn't work either. I think it could be a something to do with the internet provider because virginmedia comes up on the webpage. This is what comes up:
    Wireless Setup
    WGR614V9
    V1.0.11_1.0.1VGUK
    Wireless Setup
    Name (SSID):
    Security Passphrase (WPA-PSK):
    (8-63 characters)
    Channel:
                       01                   06                   11                
    Router Setup
    Router Password:
    (8-63 characters)
    any ideas?!?

  • I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help, thanks.

    I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help?  thanks

    Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
    To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
    Press and hold in reset until the front LED flashes rapidly.. about 10sec.
    Release the reset.
    Open the airport utility and setup the TC to bridge mode.
    The actual method depends on version of the OS and airport utility you use.
    This is version 5.
    Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
    Then setup wireless.. you have a number of choices here.
    Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
    Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
    Update the TC.. unplug fromt the computer and plug it into the homehub.
    If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

  • I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

Maybe you are looking for

  • Designer on AIX server: how to

    Hi all, I've BusinessObjects Enterprise XI 3.1 on AIX Server: how can I launch and use Designer and the other "non-web" BusinessObjects tools (e.g.Import Wizard)?  At the  moment I use Designer or Import Wizard installed on a WIN Server and then I ex

  • Dep run problem

    hi i did dep run,background job was schedule in program then i gone to job over view and excuted message displaying SM37" no jobg scheduled" what is the problem guna

  • Display languages

    Hi all, I have a new netweaver 7.0 with BI installation running on a sandbox server.  Everything seems to be running fine.  Logon languages work fine for me when using BeX web, protal, or other CRM, etc functions. However when I login and use the Pla

  • Deleted Pricing Cond rec in MEK2 and added a new one, now no pricing in PO!

    Hello,   we had a bad pricing Condition record for Stock Transport Order PO's that had to be deleted and we needed to add a new pricing condition record. We used MEK2 to delete the bad record (Purch. Info Rec Category was equal to a "space"), and the

  • IP video stream

    Hello, After a lot of research , i came to you , maybe you gonna be able to help me. Is it possible to display with flash some video stream comming from a IP camera or a DVR device (Assuming my device send a stream in a correct format ) ? I could rea